can't update to 4.4.2 OTA - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Hello, my phone recently notified me that a 4.4.2 android OTA update is available (i have a AT&T SGH-i747) however once it reboots, it will get to about 29% complete, then i get the "Update failed" message, and it reboots back into android (4.3) and i was wondering how i could get it to work?
(i'm using stock rom, i've NEVER flashed anything on it before, only thing i've done is root it to use titanium backup, however i used the saferoot thing so as to not flip the knox security stuff)

You need to unroot.

audit13 said:
You need to unroot.
Click to expand...
Click to collapse
do i have to do something special to do that? or can i just click the "Full unroot" button in the SuperSU settings tab to unroot my phone

You also need stock recovery and, preferably, all of the ATT apps on your phone. I have read that removing too many ATT apps will prevent the OTA update from completing.
I have never tried removing root that way so I cannot comment.
You should also make note of the fact that it is possible to have something go wrong during the OTA process which may result in the loss of your data. I recommend at least backing everything up to your external SD card and removing the SD card during the OTA update process.

like i said, i only rooted to use titanium backup to restore a backup for a game save, that's all i've ever done (so if that undid stock recovery, or removed AT&T apps without me telling it to, then how would i fix that)

In that case, just unroot and then run the OTA update. Titanium backup would not alter the recovery or remove apps.

well, i have 5 hours to wait before doing so, after unrooting (using the saferoot unroot.bat file, then using supersu's unroot after that to finish the process as the saferoot program said to do) i went to click check for updates, and instead got "Your device is running the latest version" and "you may check again in 5 Hours 0 Minuties" which i'm assuming is because it failed last night when i tried to update it?

So everything is completely stock? Does it say custom on the download screen or anywhere in the About section of the phone.

audit13 said:
So everything is completely stock? Does it say custom on the download screen or anywhere in the About section of the phone.
Click to expand...
Click to collapse
nope, doesn't say custom anywhere on the about phone screen, will check the download mode now

logoster said:
nope, doesn't say custom anywhere on the about phone screen, will check the download mode now
Click to expand...
Click to collapse
sorry for double post, just checked download mode, says i'm completely stock and official
also thought i'd mention that the check again later timer is going down, it's at 4 hrs and 3 minutes

You could also try booting into recovery and wiping cache and Dalvik. Don't wipe data.

nope, still has a timer, but it's fine as it is going down, i have about 2hrs and 47 Mins left according to it

Sorry for double post again, but timer finished, and update worked flawlessly, so unrooting did work, thanks
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app

Related

Rooted S-off and still getting ota update

My Dinc is rooted S-off and I'm still getting ota update notification. I tried to run the update and it does nothing....
If you're on a stock (even rooted) ROM, you'll get the ota notification. But it requires stock recovery to flash. I haven't looked into the actual zip, so I don't know if it'll flash via CWM or not. It used to not, and I doubt it's changed.
PonsAsinorem said:
If you're on a stock (even rooted) ROM, you'll get the ota notification. But it requires stock recovery to flash. I haven't looked into the actual zip, so I don't know if it'll flash via CWM or not. It used to not, and I doubt it's changed.
Click to expand...
Click to collapse
That is correct, the ota will not work unless you are complete stock. Meaning stock recovery, all original and unmodified apps and framework files, and you must still be odexed.
If you just want to stop the update nag you can go to /system with a root file explorer and open for editing the build.prop file. Look for a line that starts like this " ro.build.fingerprint= ", change the whole line to look like this without the quotes " ro.build.fingerprint=verizon_wwe/inc/inc:2.3.4/GRJ22/389630.15:user/release-keys ". This tricks the update server into thinking you already have the latest update.
If you want a rom with the new update, there is the Stock 4.08.605.15 Rom and Touch of blue. One is pure rooted stock, and TOB is mostly stock but debloated and lightly themed.
I need to get the latest OTA update, but can I only get it through a new Rom or can I just gets new OTA update to work with my current Rom?
Sent from my PC36100 using xda app-developers app
Richard6292 said:
I need to get the latest OTA update, but can I only get it through a new Rom or can I just gets new OTA update to work with my current Rom?
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
You have to be complete stock to sucessfully update ota. Just flash the stock 4.08.605.15 rom in the dev section. You'd be getting the same thing, without all the hastle of ruu'ing, updating ota, and then rerooting.
Thanks for the info! But after that, if I were to relfash my current Rom I'd just be back in the same situation right?:/ I wish my current Rom would be update but the dev'r went away..
Sent from my PC36100 using xda app-developers app
Richard6292 said:
Thanks for the info! But after that, if I were to relfash my current Rom I'd just be back in the same situation right?:/ I wish my current Rom would be update but the dev'r went away..
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
Right, if your current rom is not based on 4.08.605.15, then you will get the ota notification. Even if you got the actuall ota to install, it would more than likley mess up the rom, and then you would have to reflash the rom and you would be right back where you started. If you want to stay on your current rom but stop the ota notification, do as i said a couple posts above and edit the build.prop file to make the update server think you already have the latest ota. What rom are you currently on?
Ok, thanks for the help!!
Sent from my PC36100 using xda app-developers app
I am using TOB so can I install the update without messing things up?
joeyz400 said:
I am using TOB so can I install the update without messing things up?
Click to expand...
Click to collapse
No tob has stock apps removed and is deodexed. The ota checks to make sure all original apps and files are present and unchanged. If you wabt to get the actuall ota tou need to ruu to stock 4.06.605.3 and then ota to 4.08.695.2 and then ota to 4.08.605.15. However tob V2.1 has been updated to 4.08.605.15 already.
Experience with this OTA update
I can't post yet to the development forums and I saw that cmlusco was on here so just wanted to share my experience. I have an SMOLED Droid Incredible and I'm rooted, S-OFF on the latest CWM recovery and I was using wildstang's stock ROM from the last update back in November 2011. I got the notification, searched the forums, and ended up installing cmlusco's stock deodexed ROM, after doing all the requisite wipes and checking the md5. My initial experience was great, apart from once when the phone simply died with a black screen and was completely unresponsive. Battery pull solved that. After I was done getting all my apps back on there (mostly via downloading and then for some of them just restoring the data from Titanium Backup), I did a Titanium Backup and a nandroid backup in the recovery. After all of these were done, I started having quite a few freeze issues. I think I had three in a row before I had one while in the process of connecting the phone to my computer. Had to do the battery pull method each time but the last time, the phone must have been right in the middle of mounting to my laptop because all of my downloaded apps were "gone". As in, they were not in the app drawer and all the icons were the default Android icon on the home screens. I think something happened with the freeze in the middle of the mount. If I reinstalled an app from the market and tried to restart it, it force closed. Then, if I uninstalled and reinstalled it, it did work. But I was still getting some force closes so I figured it might just be easier to flash the ROM again, which is what I did.
So now I'm back up and running, and mostly everything is okay. I did get another freeze while installing an app and waited for a while but since the phone was still unresponsive, I did the battery pull again. Stuff is working but I thought I'd share my experience and see if anyone else had something similar happen. Oh, by the way, I also updated to the latest radio but hadn't the first time I used this ROM. And cmlusco, thanks a lot for posting that and being very patient in the forums. If this ROM fails again, I might try Touch of Blue.
cmlusco said:
That is correct, the ota will not work unless you are complete stock. Meaning stock recovery, all original and unmodified apps and framework files, and you must still be odexed.
If you just want to stop the update nag you can go to /system with a root file explorer and open for editing the build.prop file. Look for a line that starts like this " ro.build.fingerprint= ", change the whole line to look like this without the quotes " ro.build.fingerprint=verizon_wwe/inc/inc:2.3.4/GRJ22/389630.15:user/release-keys ". This tricks the update server into thinking you already have the latest update.
If you want a rom with the new update, there is the Stock 4.08.605.15 Rom and Touch of blue. One is pure rooted stock, and TOB is mostly stock but debloated and lightly themed.
Click to expand...
Click to collapse
Thanks, I changed that line and the annoying system update is gone
cmlusco said:
That is correct, the ota will not work unless you are complete stock. Meaning stock recovery, all original and unmodified apps and framework files, and you must still be odexed.
If you just want to stop the update nag you can go to /system with a root file explorer and open for editing the build.prop file. Look for a line that starts like this " ro.build.fingerprint= ", change the whole line to look like this without the quotes " ro.build.fingerprint=verizon_wwe/inc/inc:2.3.4/GRJ22/389630.15:user/release-keys ". This tricks the update server into thinking you already have the latest update.
If you want a rom with the new update, there is the Stock 4.08.605.15 Rom and Touch of blue. One is pure rooted stock, and TOB is mostly stock but debloated and lightly themed.
Click to expand...
Click to collapse
So, I edited the "ro.build.fingerprint" line, and I'm still getting the notification... I've tried the "fix" of renaming the /etc/security/otacerts.zip file to otacerts.zip.bak, which some suggest. Hell, I even ended up deleting the whole file. When that didn't work, I froze /system/app/updater.apk. Still nothing, so I deleted that file as well. Nothing is listed in my /cache folder, where some people have noted that the download stores itself. I had the 4.08.605.15 update before, and it caused my phone to freeze a lot, and randomly reboot over and over for hours. During those reboots, half my apps got deleted as well.
Needless to say, I don't want the stupid update!! But nothing I can find on any forum is stopping my phone from getting the notification every 15-20 minutes. I've tried flashing a few different ROMs, but my phone gets stuck in a boot cycle with any of them. Just the other day, I went to flash the newest CyanogenMod through CWM, and it just kept showing the blue android guy on a skateboard for (no joke) about 3 hours. I ended up pulling the battery and flashing my stock recovery.
Please let me know if there's anything else anyone can think of that might stop the notification. I'm still 3 months out from being eligible to upgrade my phone, and I'd rather not deal with the notification popping up over and over and over for that time
Thanks
ggoodman1022 said:
So, I edited the "ro.build.fingerprint" line, and I'm still getting the notification... I've tried the "fix" of renaming the /etc/security/otacerts.zip file to otacerts.zip.bak, which some suggest. Hell, I even ended up deleting the whole file. When that didn't work, I froze /system/app/updater.apk. Still nothing, so I deleted that file as well. Nothing is listed in my /cache folder, where some people have noted that the download stores itself. I had the 4.08.605.15 update before, and it caused my phone to freeze a lot, and randomly reboot over and over for hours. During those reboots, half my apps got deleted as well.
Needless to say, I don't want the stupid update!! But nothing I can find on any forum is stopping my phone from getting the notification every 15-20 minutes. I've tried flashing a few different ROMs, but my phone gets stuck in a boot cycle with any of them. Just the other day, I went to flash the newest CyanogenMod through CWM, and it just kept showing the blue android guy on a skateboard for (no joke) about 3 hours. I ended up pulling the battery and flashing my stock recovery.
Please let me know if there's anything else anyone can think of that might stop the notification. I'm still 3 months out from being eligible to upgrade my phone, and I'd rather not deal with the notification popping up over and over and over for that time
Thanks
Click to expand...
Click to collapse
make sure your file explorer is in r/w (read/write) mode or the changes that you made will not save. there is a button in the upper right part of root explorer if that is that app you are using.
nschiwy said:
make sure your file explorer is in r/w (read/write) mode or the changes that you made will not save. there is a button in the upper right part of root explorer if that is that app you are using.
Click to expand...
Click to collapse
Also you must be s-off, or adb pull edit and push the file while in recovery.
Try flashing this. Got rid of the nagging when I was on GB. Should take care of it.
http://db.tt/zPhTShuA
sorry...I was on the phone...
nschiwy said:
make sure your file explorer is in r/w (read/write) mode or the changes that you made will not save. there is a button in the upper right part of root explorer if that is that app you are using.
Click to expand...
Click to collapse
It is definitely in r/w mode. I restarted the phone, cleared cache, then checked the file again to make sure the edit was still there. And it was...
cmlusco said:
Also you must be s-off, or adb pull edit and push the file while in recovery.
Click to expand...
Click to collapse
I've had s-off since a few days after I got the phone last year.
omniatic said:
Try flashing this. Got rid of the nagging when I was on GB. Should take care of it.
http://db.tt/zPhTShuA
sorry...I was on the phone...
Click to expand...
Click to collapse
I restored from a prior backup to undo all the changes I made, so I'm going to try each of the methods again, and if nothing works, I'll flash this.
Thank you all. I've been relying too much on "one-click" solutions in the past, but I'm now trying to get more into the actual dev side of things, so I can help out with this kind of stuff as well
ggoodman1022 said:
It is definitely in r/w mode. I restarted the phone, cleared cache, then checked the file again to make sure the edit was still there. And it was...
I've had s-off since a few days after I got the phone last year.
I restored from a prior backup to undo all the changes I made, so I'm going to try each of the methods again, and if nothing works, I'll flash this.
Thank you all. I've been relying too much on "one-click" solutions in the past, but I'm now trying to get more into the actual dev side of things, so I can help out with this kind of stuff as well
Click to expand...
Click to collapse
I retried all the methods, and flashed the file mentioned above. Still no luck
Stupid notification pops up over and over and over... Guess I may either have to update, or deal with the notification until October when I can upgrade my phone. Or try flashing a custom ROM, even though I like the stock ROM
You could always flash cmlusco's touch of blue ROM which is an optimized version of the latest OTA, so you wouldn't have to worry about update notifications on that one for sure (at least on the latest version).
http://forum.xda-developers.com/showthread.php?t=1492720
but there are lots of options here
http://forum.xda-developers.com/forumdisplay.php?f=638

Android update!

Disclaimer: This worked on my phone. I am not responsible if your phone turns into an expensive brick.
I know this isn't quite the update everyone was waiting for I managed to pull the 2.3.6 OTA files. I also managed to figure out how to flash them. Turns out CWM 5 offers root adb access, everything we need to update and root this phone. Note I tried CWM 6 but it said "possible loss of root" so apparently CWM 6 likes to reside on an already rooted phone.
Note this is not the most elegant solution. The most elegant would be a signed update.zip. The second most elegant would be something flashable with CWM or Odin. Too bad I don't know how to do those. I do know how to do this.
The first thing to do is make sure you are on the AT&T stock firmware. It doesn't matter if you've already flashed something else. No need to wipe cache or factory reset or anything (although if you run into problems you should try to do that step). Download it from samfirmware.com. Flash it with Odin. This will put you on stock 2.3.5. Even if you were already on 2.3.6, or rooted, or on Rogers, this will work. After the flash, boot the phone normally, wait a minute or so, and shut it down.
Now for the fun part. AT&T will not push the OTA to a non AT&T customer. The flash will also not work with a modified phone (hence the reflash to stock). How to gain root access to manually flash the OTA? If we install root, it will not install. If we install CWM, we will not have the stock recovery which is required to process the OTA. So...
How about this? We install CWM 5. You can find it here http://forum.xda-developers.com/showthread.php?t=1458153
Then we adb into the phone, and push the OTA files, and then reflash the stock recovery over CWM, and then manually reboot into OTA mode. That sounds crazy... crazy enough to work.
After you've flashed CWM, reboot into it and make sure your phone is still connected to your computer. We won't actually be using CWM, just the root access it provides over adb. Unzip the two zip files below (why use external hosting, I can store zips up to 11 MB on here) into a folder and run fota.bat. Ooo and ahh over your Gingerbread.
But what about root? Well, I posted in another thread a complicated method for rooting 2.3.6 using the root access from CWM, but how about easy? Boot your phone into 2.3.6 and let it sit for a minute or so, and shut it down. Reboot into Odin mode, and reflash CWM over the stock recovery (again). Copy the Superuser zip from the folder you made earlier to your SD card. Flash this with CWM. This is the beta of Superuser 3.2, courtesy of Rom Manager. Download the stericson busybox app from the Market if you want busybox as well.
This was a fun way to kill a weekend
Throws a signature verification failed error.
Try again with the new method
Had a few mild scares. After flashing CWM on stock, it refused to boot into it but after 3 tries and my screen acting up upon boot, it finally booted into CWM. Launched the bat file and it went well. Upon booting up and entering the update process, it froze up at 74% and refused to continue. Rebooted the phone and it once again entered the update process and this time it managed to finish. Phone rebooted and after checking "About phone", my phone is on 2.3.6 stock. When you initially provided the OTA files and the sig check failed, I had a good feeling this would be the only other way to do it as I tried to sign it and it also failed. Thanks for taking the time to post all of this.
Why go to 2.3.6? It´s better than 2.3.5 customized?
Better question: we're getting ICS within the month, so why bother with 2.3.6 when you can just upgrade to 4.x.x when it comes down?
-Ara
AraDreamer said:
Better question: we're getting ICS within the month, so why bother with 2.3.6 when you can just upgrade to 4.x.x when it comes down?
-Ara
Click to expand...
Click to collapse
Because there are some people who will want to stick with 2.3.5/6 . He made this so that those who do, can update to 2.3.6 even when they aren't with AT&T, almost hassle free.
narume said:
Had a few mild scares. After flashing CWM on stock, it refused to boot into it but after 3 tries and my screen acting up upon boot, it finally booted into CWM. Launched the bat file and it went well. Upon booting up and entering the update process, it froze up at 74% and refused to continue. Rebooted the phone and it once again entered the update process and this time it managed to finish. Phone rebooted and after checking "About phone", my phone is on 2.3.6 stock. When you initially provided the OTA files and the sig check failed, I had a good feeling this would be the only other way to do it as I tried to sign it and it also failed. Thanks for taking the time to post all of this.
Click to expand...
Click to collapse
When I was testing this, I saw that behavior if you didn't completely boot up the phone between steps (ie, flash stock firmware, boot phone, flash CWM, boot phone). I don't know what would cause it otherwise. Glad to see your phone made it.
narume said:
Because there are some people who will want to stick with 2.3.5/6 . He made this so that those who do, can update to 2.3.6 even when they aren't with AT&T, almost hassle free.
Click to expand...
Click to collapse
Actually I did it because I've owned this phone for exactly two weeks and discovered all the available ROMs are based on 2.3.5 even though 2.3.6 has been out since December. CWMR with root has been out since January, and since then nobody else has rooted 2.3.6 or found a way to flash it. And I thought, it couldn't be that hard? And even more amazed when I discovered CWMR comes with root out of the box, without even touching /system. The only other missing piece was the stock recovery, which also wasn't out in the wild. 3 birds for one stone
On a side note, if you want to do some cleaning after the OTA and you decide to root, you can delete /cache/fota and /data/fota safely.
Nardholio said:
Actually I did it because I've owned this phone for exactly two weeks and discovered all the available ROMs are based on 2.3.5 even though 2.3.6 has been out since December. CWMR with root has been out since January, and since then nobody else has rooted 2.3.6 or found a way to flash it. And I thought, it couldn't be that hard? And even more amazed when I discovered CWMR comes with root out of the box, without even touching /system. The only other missing piece was the stock recovery, which also wasn't out in the wild. 3 birds for one stone
On a side note, if you want to do some cleaning after the OTA and you decide to root, you can delete /cache/fota and /data/fota safely.
Click to expand...
Click to collapse
Ah, I see. Well, still, being able to flash to 2.3.6 is nice because if anyone ever decides to stick with 2.3.6 they can easily flash the update now. Maybe more people like you will pop up and start pushing out more useful content like this for the Glide so it won't be a dead area of development anymore.

How to update from stock root 4.1.1 to current?

I'm sure this has been addressed but I can't seem to find a definitive answer. I am bone stock (stock recovery and no custom rom) with just root on AT&T.
There are no missing deleted apps, as I replaced them previously but I still have never been able to do any of the OTA updates. It's starts and then fails.
Is there a way to unroot and the do an OTA update? I am trying to avoid Odin so I dont have to wipe everything and then have to start all over and adjust settings to my liking an also reinstall all of my apps.
I seen there is an option in the Super User app to "completely unroot and uninstall". Will choosing this option allow me to finally do OTA?
I've never installed a custom recovery or a custom rom so I don't know why OTA's always fail. At this point, I dont really care about having root since the only reason I previously wanted it was to remove at&t bloatware but I'd rather have OTA's at this point.
Any advice or direction would be greatly appreciated! Please speak slowly and in layman's terms as I am an old fart that is still a bit of a n00b, lol.
Thanks!!
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
n01un0 said:
I'm sure this has been addressed but I can't seem to find a definitive answer. I am bone stock (stock recovery and no custom rom) with just root on AT&T.
There are no missing deleted apps, as I replaced them previously but I still have never been able to do any of the OTA updates. It's starts and then fails.
Is there a way to unroot and the do an OTA update? I am trying to avoid Odin so I dont have to wipe everything and then have to start all over and adjust settings to my liking an also reinstall all of my apps.
I seen there is an option in the Super User app to "completely unroot and uninstall". Will choosing this option allow me to finally do OTA?
I've never installed a custom recovery or a custom rom so I don't know why OTA's always fail. At this point, I dont really care about having root since the only reason I previously wanted it was to remove at&t bloatware but I'd rather have OTA's at this point.
Any advice or direction would be greatly appreciated! Please speak slowly and in layman's terms as I am an old fart that is still a bit of a n00b, lol.
Thanks!!
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
If you are on stock and have a valid AT&T SIM card in the device with full access to Wi-Fi and the AT&T network, you should be able to get an OTA update. Root could, however, indeed prevent an OTA update so your best bet may be to unroot. You could unroot and uninstall SuperSU from the SuperSU app just as you suggested. This should do it. However, if it doesn't and you would really want to avoid Odin and custom recovery, then you could do a 2-step manual update to 4.3 via stock recovery - first to 4.1.2 and then to 4.3. This will naturally update your phone to (full) stock 4.3 and we can then see if the phone will take the Kit-Kat OTA update from there.
You can see the instructions for the 2-step update via stock recovery in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2387423
1) Download the 2 zip files under update412.zip and update43.zip respectively to your computer
2) Copy the zip files to a good quality (micro) SD card
3) Place the card in your phone and boot to recovery mode by simultaneously holding down the Volume Up, Home and Power buttons
4) Hold the buttons until you see a blue message flash across the screen. Then release the Power button but continue to hold the Volume Up and Home button until you see the Android image appear. Then release the buttons
5) Use the volume up/down key to scroll to <mount from external storage> and the power button to select
6) Navigate to the first zip file (update412.zip) and install. Wait for installation to finish and your phone to reboot.
7) Complete set up. Check your phone settings. Then power off and reboot to recovery again.
8) Repeat the process for the second update file.
Well I tried the unroot feature in SuperSU and then uninstalled it.
I then tried the OTA update again and as usual, it failed about 30-40% in.
Ive never installed a custom recovery or a ROM so I don't get it. All I did was use Mr.Robinsons thread/directions on "how to root without tripping...." just for root only in the sticky.
I give up.:banghead:
Thank you though for responding. I may try the alternative way you suggested when I get time tomorrow and see what happens. Either that or screw it, im stuck with 4.1.1 and now I don't even have root. :banghead:
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
n01un0 said:
Well I tried the unroot feature in SuperSU and then uninstalled it.
I then tried the OTA update again and as usual, it failed about 30-40% in.
Ive never installed a custom recovery or a ROM so I don't get it. All I did was use Mr.Robinsons thread/directions on "how to root without tripping...." just for root only in the sticky.
I give up.:banghead:
Thank you though for responding. I may try the alternative way you suggested when I get time tomorrow and see what happens. Either that or screw it, im stuck with 4.1.1 and now I don't even have root. :banghead:
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
There have been several reports of failed OTA update so you may not be alone here. The process I advised is sure to take you to 4.3 JB without hassle. There is, of course, a manual update process from 4.3JB to 4.4.2 Kit-Kat (the latest OS). You will, however, require custom recovery for this ...
http://forum.xda-developers.com/showthread.php?t=2788357
Larry2999 said:
There have been several reports of failed OTA update so you may not be alone here. The process I advised is sure to take you to 4.3 JB without hassle. There is, of course, a manual update process from 4.3JB to 4.4.2 Kit-Kat (the latest OS). You will, however, require custom recovery for this ...
http://forum.xda-developers.com/showthread.php?t=2788357
Click to expand...
Click to collapse
Well I finally was able to update via OTA. I had to actually use Kies and reinstall firmware and then go through all the updates, starting from scratch and took forever. What an absolute pain in the ass. Plus, after all this work to go from 4.1 to 4.4..........I can't see where it was worth it. I am now going through the tedious task of setting up all the settings and widgets and everything else the way it was or the way I like. So much for Kies actually backing up and "restoring" anything.
I have a couple of questions though....
1. Now that I am on 4.4..........how do I root this version (that works). I was reading the thread saying to use towelroot but it's not confirmed if this is still working after I guess you do the OTA after a certain date and it's now patched. I DO NOT want to install custom roms or anything else. All I want is root so that I can remove the AT&T crapware that is now even worse with this phone on 4.4.
2. I have a battery percentage that is in the LEFT upper corner that I can not figure out what program or app it is associated with and I can not get rid of it. This is not the % indicator that is part of Android and next to the battery icon on the right which is on and is okay, this is one the left.
3. I hate the new PIN lockscreen because the keypad/numbers are so small compared to old version. Any way to fix this?
n01un0 said:
Well I finally was able to update via OTA. I had to actually use Kies and reinstall firmware and then go through all the updates, starting from scratch and took forever. What an absolute pain in the ass. Plus, after all this work to go from 4.1 to 4.4..........I can't see where it was worth it. I am now going through the tedious task of setting up all the settings and widgets and everything else the way it was or the way I like. So much for Kies actually backing up and "restoring" anything.
I have a couple of questions though....
1. Now that I am on 4.4..........how do I root this version (that works). I was reading the thread saying to use towelroot but it's not confirmed if this is still working after I guess you do the OTA after a certain date and it's now patched. I DO NOT want to install custom roms or anything else. All I want is root so that I can remove the AT&T crapware that is now even worse with this phone on 4.4.
2. I have a battery percentage that is in the LEFT upper corner that I can not figure out what program or app it is associated with and I can not get rid of it. This is not the % indicator that is part of Android and next to the battery icon on the right which is on and is okay, this is one the left.
3. I hate the new PIN lockscreen because the keypad/numbers are so small compared to old version. Any way to fix this?
Click to expand...
Click to collapse
Glad to know you were finally able to update. To try to answer your questions ....
1. Towelroot indeed comes well recommended for rooting on Kit Kat. You could, however, first try CF Auto Root which is one of the simplest approaches to rooting. If this doesn't work, you could try Option 2 in the thread below ... The thread also contains instructions to CF Auto Root.
http://forum.xda-developers.com/showthread.php?t=2538991
2. I'm not sure what that battery indicator is. I run 4.4.2 also on my S3 but I cant see this. Can you try a reset to see if it would go away?
3. You can try removing this from settings.
Im glad you asked this...
I too noticed Im on 4.1.1 stock but rooted. I wondered if you could go to 4.4.2 as my phone tried to OTA update on its own last week and failed. I did not know if it was worth it to try or not another way. About the only thing I see that would want me to try is Google Wallet now working with S3 on 4.4.2 without having to jump through all kinds of hoops, mine used to work fine, but now GW will not open up all the way. Im not sure its worth doing if I have to re setup all my crap as I will be upgrading my phone whenever I want, just holding out to see if the Nexus 6 will be out end of the year and on AT&T..Im not liking that all the new phones are getting so freakin big, the S3 is just right and I dont want to have to end up with a damn Note sized phone but that is a whole other discussion
If you're still on 4.1.1, BEFORE ANYTHING ELSE, UNLOCK YOUR PHONE IF HASN'T ALREADY
otherwise you'll regret it
then the rest, tbh, you don't need to unroot at all to upgrade, just flash the firmware in ODIN or recovery..
edit: nvm it seems like you've already upgrade yours to KitKat

[Q] 4.1.2 to 4.4.2

Hi everyone.
I’m currently on rooted SGH-i747M(Rogers) 4.1.2, and I'm trying to find out how to upgrade to 4.4.2 and keep it rooted.
Since my device is already rooted it won’t let me update to the latest firmware.
What would be the proper procedure to move to 4.4.2 rooted?
and does it worth it to upgrade to 4.2.2? I'm asking because I've seen posts on how to downgrade to 4.1.2 from 4.4.2.
Thanks so much in advance.
Once you upgrade to 4.3 or 4.4.2, you cannot downgrade to anything before 4.3.
Is your phone carrier unlocked? If not, I suggest downgrading to 4.1.1, unlock it, then start upgrading the stock ROM.
The easiest way would be to flash back to stock non-rooted 4.1.1, unlock it, and start updating via OTA or use desktop Odin to flash a stock Rogers ROM from sammobile.com.
stssific sarah
audit13 said:
Once you upgrade to 4.3 or 4.4.2, you cannot downgrade to anything before 4.3.
Is your phone carrier unlocked? If not, I suggest downgrading to 4.1.1, unlock it, then start upgrading the stock ROM.
The easiest way would be to flash back to stock non-rooted 4.1.1, unlock it, and start updating via OTA or use desktop Odin to flash a stock Rogers ROM from sammobile.com.
Click to expand...
Click to collapse
Thanks alot for the tips!
I'm on Rogers and I don't remember doing any unlocking.
So do I download the stock 4.1.1 also from sammobile.com and use Odin to downgrade to it?
And after I unlock it on 4.1.1, do OTA update to 4.4.2., and then root it?
newbie386 said:
Thanks alot for the tips!
I'm on Rogers and I don't remember doing any unlocking.
So do I download the stock 4.1.1 also from sammobile.com and use Odin to downgrade to it?
And after I unlock it on 4.1.1, do OTA update to 4.4.2., and then root it?
Click to expand...
Click to collapse
Exactly. That's what I did with my Bell s3. Make sure you are not rooted and running stock recovery before running OTA updates.
audit13 said:
Exactly. That's what I did with my Bell s3. Make sure you are not rooted and running stock recovery before running OTA updates.
Click to expand...
Click to collapse
On 4.1.1 what unlocking method did you use?
http://forum.xda-developers.com/showthread.php?t=2176719
This is my experience with the T999 model but it should be the same here. Personally I hate otas, so I avoid them if at all possible.
You shouldnt need to flash the full 4.1.1 firmware to do the unlock. Just the modem. Then flash the 4.4.2 firmware via odin after unlocking. Reroot and youre done.
Nothing wrong with how audit13 suggested btw. Itll work that way too. Just offering an alternative.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Thanks to you all, I'm now on rooted 4.4.2 with CWM.
One thing I missed is to backup the rom using CWM. I've already restored all my previous apps and data using Titanium Backup, and I had to go through a lot of troubleshooting with errors like *Unfortunately ***** has stopped." I think everything's working well now though. Should I still do backup in CWM or is backing up with TB enough?
My second question is that it seems to drain battery more. When I wake up this morning the battery was only at 85% or so. I have it plugged in now but it's charging very slow. Is this a known issue with a fix?
Did you restore data and settings for system apps? If so, this can cause issues if done from one build to another, such as battery drain, force closes and degraded performance.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
DocHoliday77 said:
Did you restore data and settings for system apps? If so, this can cause issues if done from one build to another, such as battery drain, force closes and degraded performance.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
I did TB-> Batch Actions -> Restore all apps with data. Right below there is 'Restore all system data' which I didn't do, but I'm not sure if that 'all' includes system data as well?
The selections under Restore section in Titanium Backup were the following:
RUN: Restore missing apps with data
RUN: Restore all apps with data <<=== this is what I did
RUN: Restore all system data
RUN: Restore missing apps + all system data
RUN: Restore newer versions of user apps
I recharged to 100% then performed a Battery Calibration using an app, but 20% just got drained in an hour and half of pretty much all standby time(screen off).
I would factory reset, reboot and let it sit for a few minutes. Then using titanium, restore only essential apps and data first. You should be able to use the batch restore and then select from a list what you want to include. Test for a bit to see if anything you restored causes problems. If not restore a few more and test. Do this until you narrow down what is causing your problems.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
You're right. I should just do that.
I was following the root method at galaxys3root.com, and the files I was told to use were UPDATE-SuperSU-v2.01, Odin3 v1.85 and CWMS3ATTrecovery.tar in which there was image.img without any version number.
I did some digging and found Odin3 v3.09 which seems to be the latest version. Then I went to http://www.clockworkmod.com/rommanager to download the CWM from the original source, but they're all img files and odin wants a tar file. How do I put this into a tar file, and do I need to rename any? I just want to do everything right this time. Would DE-SAMSUNGNIZER_KNOX_REMOVAL_SCRIPT_V2.1 be a good idea as well?
edit: oh never mind I went into the CWM and saw the version was 6.0.4.7 which is the latest. So I'll just use the same files again for root.
I just did a factory reset, and the CWM and the root as well as superSU are not lost. Is this normal? I thought factory reset takes away the root... Also I just checked in download mode that the Warranty Bit is now 1. It was 0 when I first rooted, so I'm guess the resetting might have done that. Oh well...
Custom recoveries and kernels are what usually trip the warranty bit, so if you installed cwm, thats what tripped it. I wouldn't worry too much over it. Warranty claims are pretty rare, and a lot of people have reported their warranty was honored even though the bit was tripped.
Root will remain after resetting because it is on the system partition. Factory reset only wipes /data.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
After factory reset I only restored some of the apps this time, and for many of them I restored only the data. But this battery drain issue is still there. It not only drains battery but in the morning when I woke up the lock screen didn't want to come on. I pressed the power button, and the three physical buttons' LED lights were lit but the screen remained blank. It took a long time until the lock screen comes on but it didn't respond to touch, acting very very laggy until I reboot. I tried wiping dalvik cache(although I wasn't quite sure what it was) in restore mode but it didn't help.
I learned about battery drain monitor apps and downloaded Wakelock Detector. It was showing that my AVG Antivirus Pro is awake all the time taking a lot of battery, and I'm not quite sure if it's supposed to be that way since it should be running in the background all the time. But this seem to be still too much. Can I just assume at this point that the Antivirus is what's causing the issue?
I've seen others recommend wakelock detector, but I'm not familiar with it myself. But I doubt your AV should be using that much, nor should Android System. But a dead giveaway that there's a problem lurking is it only spent 1 second in deep sleep. And 7.5 hours awake with the screen off.
Looking at the wld screen, it certainly seems like AVG is the problem, or at least a big part of it! I'm not sure it's the only one though with your system use being so high in the first screen shot.
I'd suggest uninstalling AVG and test it at least for one full cycle. Also, look to see if wld is able to log kernel wakelocks. In better battery stats you have to set it to do so in settings if I remember right.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

Screen rotation stops working?

I have a T-Mobile Note 3, all stock, not rooted. I recently installed the lollipop update, and now my screen rotation stops working.
A reboot fixes it, but it will stop working again later in the day.
I have auto rotate on, smart rotate is not on, auto brightness is on (a search said this worked but it was for an older firmware).
Has anyone seen this or possibly know a good fix?
Wow, nobody else has seen this?
WatermelonSlim said:
I have a T-Mobile Note 3, all stock, not rooted. I recently installed the lollipop update, and now my screen rotation stops working.
A reboot fixes it, but it will stop working again later in the day.
I have auto rotate on, smart rotate is not on, auto brightness is on (a search said this worked but it was for an older firmware).
Has anyone seen this or possibly know a good fix?
Click to expand...
Click to collapse
hello
i had a few issues when i upgraded from 4.4.2 to 5.0 stock lollipop... first of all check if the baseband shows same as the build name.. it should both finish in OB6 ....also try booting the phone in safe mode to see if its and app/tweak error... u could also try a factory reset or a full factory reset from recovery screen with a full wipe and cache and dalvik cache erased but i dont know if its possible in stock android recovery since first thing i do when i unbox the phone is to root... always running rooted and with custom recoveries since i like to mod and tweak my phone i suggest you to try to root and release your phone full potential hope this works for you.
Sent from my SM-N900T using XDA Free mobile app
Reinstalling the lollipop firmware may correct it.
Odin, Kies or whatever method you used, try a reinstall.
Pp.
PanchoPlanet said:
Reinstalling the lollipop firmware may correct it.
Odin, Kies or whatever method you used, try a reinstall.
Pp.
Click to expand...
Click to collapse
I just went to Settings, General, About Device, Check for Updates and installed it from there. When I go there now it says the device is up to date, so no way to do it the same way as the first time.
Tostido has a full firmware zip available, you can download extract and reflash using Odin 3.09.
Find it here http://forum.xda-developers.com/showthread.php?p=59257327
This will reinstall the latest update and should correct rotation problem.
Pp.
Funny thing is my wife has the same issue on hers. I guess we'll both have to reflash.
Is there a way to flash that toastido version without losing everything? I have a bunch of apps installed, pictures, memos to myself, etc.
WatermelonSlim said:
Funny thing is my wife has the same issue on hers. I guess we'll both have to reflash.
Is there a way to flash that toastido version without losing everything? I have a bunch of apps installed, pictures, memos to myself, etc.
Click to expand...
Click to collapse
sure there is... i suggest you to root your device... its very easy and means no harm unless you start playing with system stuff but basically it just unleash your phone full power.... and once you rooted you just install titanium backup which is the best back up ever (in my opinion) and u do a full system data/user data back up which it will save ALL phone and apps settings and data and you just save the titanium back up folder to your pc and then put it back once you done flashing... also be careful once u flash and you are reverting the back up since the error might be a misconfiguration somewhere... but u can choose manually which stuff u wanna restore like accounts messages phone call history and more... also remember to root back again and installing a custom recovery like TWRP or CWM so i can flash stuff and back up and get a better recovery experience and also u could flash the SD card write fix since on newer versions phone wont let you write data directly to a SD card.... hope it helps at all and good luck
Sent from my SM-N900T using XDA Free mobile app

Categories

Resources