I know there aren't a ton of us At&t Note 8 Variant users out there...but the few of us that are have received an update to Kit Kat finally...
So now, I'm starting this simple question thread: - HOW CAN WE ROOT?
Just to keep track of what is tried and what doesn't work for the new update version-until we have success!
Baseband version: I467UCUBNI2
So, what have you tried and what were the results? Has anyone succeeded?
I've tried: saferoot, towelroot, kingo - none have worked.
What have you tried?
kcour2006 said:
I know there aren't a ton of us At&t Note 8 Variant users out there...but the few of us that are have received an update to Kit Kat finally...
So now, I'm starting this simple question thread: - HOW CAN WE ROOT?
Just to keep track of what is tried and what doesn't work for the new update version-until we have success!
Baseband version: I467UCUBNI2
So, what have you tried and what were the results? Has anyone succeeded?
I've tried: saferoot, towelroot, kingo - none have worked.
What have you tried?
Click to expand...
Click to collapse
Unless someone finds a new exploit, we're SOL.
TMartin said:
Unless someone finds a new exploit, we're SOL.
Click to expand...
Click to collapse
Agreed - although it's nice to have a device that no longer studders.
Please give us root
godzulu said:
Please give us root
Click to expand...
Click to collapse
I agree...we need more investigation done. I've tried all exploits and none work.
I've also tried pulling the ROM off the 0 hone and have been unsuccessful.
Keep trying everyone!
KC
NOTE 3 - ROOTED
kcour2006 said:
I agree...we need more investigation done
Click to expand...
Click to collapse
Nothing?
fedex2go said:
Nothing?
Click to expand...
Click to collapse
Thus far nothing. I've tried quite a bit and have not found anything. This is a new OTA so it will take time.
KC
kcour2006 said:
Thus far nothing. I've tried quite a bit and have not found anything. This is a new OTA so it will take time.
KC
Click to expand...
Click to collapse
Can you get the 4.4.2 kernel for your device as an Odin flashable image? If so, there might be a way.
ramjet73
ramjet73 said:
Can you get the 4.4.2 kernel for your device as an Odin flashable image? If so, there might be a way.
ramjet73
Click to expand...
Click to collapse
No not yet. I've taken some back ups but haven't been enable to extract the files. Need someone more knowledgeable than I on how to pull the data.
KC
kcour2006 said:
No not yet. I've taken some back ups but haven't been enable to extract the files. Need someone more knowledgeable than I on how to pull the data.
KC
Click to expand...
Click to collapse
I downloaded the update but did not install it. I put the file on my dropbox. Its a cfg file 800mb or so in size. Can anyone do anything with that so we can get root? Let me know and Ill send a link.
godzulu said:
I downloaded the update but did not install it. I put the file on my dropbox. Its a cfg file 800mb or so in size. Can anyone do anything with that so we can get root? Let me know and Ill send a link.
Click to expand...
Click to collapse
Go ahead and send me the link.
Following a thread in the Galaxy S5 forums I was able to root an S5 with Towelroot by flashing a signed (important if you don't want to trip the KNOX flag) kernel from an older firmware release, do the root, and then re-flash the signed kernel for the 4.4.2 version. I can't guaranty it work on your device, and I have the GT-N5100, but if we can extract the signed kernel from your image the pieces should be available to try it.
ramjet73
ramjet73: just sent you the link
godzulu said:
ramjet73: just sent you the link
Click to expand...
Click to collapse
Progress...great job you two!
KC
NOTE 3 - ROOTED
Yea, I looked at it.
You can too by using 7zip to "open archive".
Here's the root directory of the 2400258.cfg file you linked:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There is no signed "boot.img" file that could be flashed with Odin or Heimdall. When I checked the updater script a patch method is used to updated the previous kernel:
Code:
ui_print("Patching boot image...");
apply_patch("EMMC:/dev/block/mmcblk0p9:5150976:8293cf49006c35a33647cba0f6153bc8320ae5de:6080784:eaee84c0a938f101931ca0b235cbbee112c26499",
"-", eaee84c0a938f101931ca0b235cbbee112c26499, 6080784,
8293cf49006c35a33647cba0f6153bc8320ae5de, package_extract_file("patch/boot.img.p"));
Without a complete 4.4.2 version of a signed boot.img file you wouldn't be able to return to the original kernel after rooting. I wouldn't recommend the method I mentioned previously until that's available.
ramjet73
Thanks for taking a look. Will search for the correct boot.img file. Nothing on sammobile yet
godzulu said:
I downloaded the update but did not install it. I put the file on my dropbox. Its a cfg file 800mb or so in size. Can anyone do anything with that so we can get root? Let me know and Ill send a link.
Click to expand...
Click to collapse
I would like to tinker with getting root on 4.4.2, I have the SGH-i467, but I'm having trouble even getting the OTA update.. (no longer an ATT customer)
Any way you can share a link to your download?
Thanks,
debehm said:
I would like to tinker with getting root on 4.4.2, I have the SGH-i467, but I'm having trouble even getting the OTA update.. (no longer an ATT customer)
Any way you can share a link to your download?
Thanks,
Click to expand...
Click to collapse
I'll leave that up to @godzulu since it's his IMG file but just want to make sure you know that you need to be 100% stock on the previous build to use that file to update to 4.4.2.
ramjet73
Thanks!
I just started looking for information on viable rooting methods for the i467 after the 4.4.2 update and am a little disapointed with the news i found on this post. I had hoped to find a ez method to remedy a few issues such as the ext SD storage problem.
Thanks to OP and all here working to fix the problem!! Off to research more & hopefully be able to bring something helpful back.
We waited for a LONG time to recieve ANY updates so hopefully we wont be waiting long to get root back.
debehm said:
I would like to tinker with getting root on 4.4.2, I have the SGH-i467, but I'm having trouble even getting the OTA update.. (no longer an ATT customer)
Any way you can share a link to your download?
Thanks,
Click to expand...
Click to collapse
this is from thread on how to root i467 on 4.1.2 Stock firmware. I'm not on att too and it worked for me.
Triped KNOX counter
Im not shure this will help at all but I found the error file that my tablet made after the update faild since I acedently triped the Warrenty counter in KNOX. Its from the SGH-I467 I also have the OTA file saved its 813mb. My programing skills are limited.
Related
Okay I have been looking at threads everywhere doing my research on How to get 1700MHz for ATT Galaxy S3 i747. Basically if your trying to use T mobile sim US only on a Atnt GS3 you will only get 2g(Edge). Well i found several ways to get 3G/4G to work! I will be making a Video tutorial for those who dont know much about Flashing and stuff like that. Tutorial will include How to flash files and what to do if something goes wrong! (TRY AT YOUR OWN RISK) i have done it to many devices and it worked successfully, but you never know. I will show you guys everything from scratch how it only gets 2g(edge) to after the whole process when 3g/4g is enabled!
But to make things clear im taking credit for basically doing a video guide which i will upload to YouTube and post here soon. And the other thread was getting messy for new users to find main post
Download Files and Instructions Down below
https://www.dropbox.com/sh/yo6oig6c7rws3iq/FvmfVqxiYd
PLEASE LEAVE FEEDBACK ON WHETHER IT WORKED OR NOT. Thank You
Stock Files Download: http://www.hotfile.com/dl/182319352/b8d55a6/I747UCDLK3_I747ATTDLK3_ATT.zip.html
If your Going to be Rooting ROOTING FILE: http://forum.xda-developers.com/showthread.php?t=1963790
If rooting Replace PLATFORM_T999UVALH3_1086264_REV04_user_low_noship.tar.md5 with root file given link above
If your after you flash Files you decide you wanna use a custom rom, You use Atnt roms so basically after flashing these files/rooting you do everything as if it where a atnt phone
Instructions
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashing Instruction:
1. Launch Odin3 v3.04.exe Load, and load all the files as screenshot below.
2) LTE Binary: Take a battery out from the device and make sure the device is I747 ATT model.
- BOOTLOADER_T999UCALH3_1075297_REV04_user_low_noship.tar.md5
- PLATFORM_T999UCALH3_1075297_REV04_user_low_noship.tar.md5
- MODEM_T999UCALH3_1075297_REV04_user_low_noship.tar.md5
- CSC_ATT_I747ATTALH1_1075297_REV04_user_low_noship.tar.md5
[/B]
Credit to this the owner of this thread! http://forum.xda-developers.com/showthread.php?t=1771021
Moderator Edit, donation request links removed
Users here make guides and videos because they want to contribute to the cause, not make money for videos
Thanks for this! Few questions:
1. Is it possible to revert back to at&t if needed and how?
2. Is the master reset (complete device wipe including internal storage) a must?
3. What if I'm on the LK3 4.1.1? Will this still work or do I need to revert to the 4.0?
4. After completing this will i be able to flash new roms as desired or will that bork it up?
Oh and... First!
PMDColeslaw said:
Thanks for this! Few questions:
1. Is it possible to revert back to at&t if needed and how?
2. Is the master reset (complete device wipe including internal storage) a must?
3. What if I'm on the LK3 4.1.1? Will this still work or do I need to revert to the 4.0?
4. After completing this will i be able to flash new roms as desired or will that bork it up?
Oh and... First!
Click to expand...
Click to collapse
1.Yes you can flash files back to ATT i will be mentioning on my video when uploaded. But usually just find m5d files and flash back the atnt files
2. No factory rest/wipe not required for these files.
3.No you can do it off of any Android version. if for some reason doesnt work. revert back to stock version on your atnt s3
4. yes you can root and flash any rom
Email me or Message me on here
O and please vote on my poll on top of this thread after you try this method. Donations are welcome. Really put alot of work on to this. In sure your gonna appreciate this post. Video will be uploaded sometime soon
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
how about thanking or mentioning the people where this information originally came from?granted we needed a new thread but donations are not needed when credit wasn't given,heres the original, http://forum.xda-developers.com/showthread.php?p=40121505#post40121505
You should give credit to the original person who was kind enough to share the files and flashing instructions.
p.s. good job on the tutorial.
Sent from my SGH-I747
I think this is great that you made a guide
But you should thank your sources
And donations? Maybe your sources should recieve some of that as well.
Edit: I guess you did thank, near the bottom.
96hondaex said:
You should give credit to the original person who was kind enough to share the files and flashing instructions.
p.s. good job on the tutorial.
Sent from my SGH-I747
Click to expand...
Click to collapse
Yes i did give thanks to original post, when i first tried it. And stay tuned for a tutorial if any of you guys find this difficult. and like i said Video will be uploaded for free no charge. But donation will motivate me to get it done faster.
Takenover83 said:
I think this is great that you made a guide
But you should thank your sources
And donations? Maybe your sources should recieve some of that as well.
Edit: I guess you did thank, near the bottom.
Click to expand...
Click to collapse
Well i did thank after i saw everyones post, but yeah i should of done that at first. But to make things clear im taking credit for basically doing a video guide which i will upload to YouTube, and post here soon. And the other thread was getting messy for new users to find main post
Do we need to input the tmo APN settings or will they show up once a Tmo sim is inserted? If needed do you know the APN settings that will work?
PMDColeslaw said:
Do we need to input the tmo APN settings or will they show up once a Tmo sim is inserted? If needed do you know the APN settings that will work?
Click to expand...
Click to collapse
no need it automatically show when sim is inserted, But files need to be flashed with odin in order to unlock 1700MHz bands to use tmobile 3g/4g/lte depending on your location you might get 4g/lte speeds or only 3g
shafter13 said:
no need it automatically show when sim is inserted, But files need to be flashed with odin in order to unlock 1700MHz bands to use tmobile 3g/4g/lte depending on your location you might get 4g/lte speeds or only 3g
Click to expand...
Click to collapse
Ok my gs3 is running great with 3g speeds! Next question: Should I root this using the methods from the att forums or go over to the tmobile forums and use their root methods? Also can I flash an att rom or does it have to be a Tmo one?
PMDColeslaw said:
Ok my gs3 is running great with 3g speeds! Next question: Should I root this using the methods from the att forums or go over to the tmobile forums and use their root methods? Also can I flash an att rom or does it have to be a Tmo one?
Click to expand...
Click to collapse
Y
You have to use the ant s3 root file to flash instead of the one given on this form to root. I will be including on my video, but give it try the regular way. If it doesnt work reflash files. It should but if not ill will include in my video for you stay tuned
shafter13 said:
Y
You have to use the ant s3 root file to flash instead of the one given on this form to root. I will be including on my video, but give it try the regular way. If it doesnt work reflash files. It should but if not ill will include in my video for you stay tuned
Click to expand...
Click to collapse
This method worked fine! http://forum.xda-developers.com/showthread.php?t=2042775
Now to flash a 4.1.x rom and enjoy!
shafter13 said:
Thanks for donation! If you ever need anything let me know! Please vote on my poll theirs two question you answered one thank you
Click to expand...
Click to collapse
It wont let me go back and answer the poll again. Either way thanks for posting the files and all your help! I had seen this solution posted by the guy who figured it out, but he never posted the files or instructions anywhere so i was never sure if it worked or not.
downloaded the files, but it seems that there are only the fioles for the TMO phone. not the ATT phone for use on TMO network.
You don't need atnt files , if your planning on rooting use the root file instead of given file
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
shafter13 said:
You don't need atnt files , if your planning on rooting use the root file instead of given file
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
my phone is rooted, on tmobile. so i just flash the files that i downloaded?
happyhourtx said:
my phone is rooted, on tmobile. so i just flash the files that i downloaded?
Click to expand...
Click to collapse
yes, but use root file you used to root instead of the one provided in download
shafter13 said:
yes, but use root file you used to root instead of the one provided in download
Click to expand...
Click to collapse
dang. i dont know what root file i used! hahaha. how do i find this out? sorry for the questions, just want to get off edge!
It's finally here. Downloading from NYC. 695mb
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-P600 using Tapatalk
Enjoy.....g
wilsonhuang said:
It's finally here. Downloading from NYC. 695mb
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Can we get a screen shot of your "About device page... expecially the baseband and kernel versions... build also if possible.
Can someone let us know if the update fixes the stupid screen rotation bug when you turn off auto-brightness. Also, if there is a noticeable change in overall snapiness. Thanks!
jfkerekes said:
Can we get a screen shot of your "About device page... expecially the baseband and kernel versions... build also if possible.
Click to expand...
Click to collapse
It's up sir!
Sent from my SAMSUNG-SGH-I317 using Tapatalk
General noob question:
How would I go about rooting 4.3 for AT&T? Can someone point me to the thread of it exists? Yes I've tried the search function and no nothing exact came up. I don't want to mess up and then be "that guy" on here crying about making a noob mistake.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Jspex said:
General noob question:
How would I go about rooting 4.3 for AT&T? Can someone point me to the thread of it exists? Yes I've tried the search function and no nothing exact came up. I don't want to mess up and then be "that guy" on here crying about making a noob mistake.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
See Dr. Ketan and his thread regarding the bootloader on 4.3.....g
Will you be able to go back to 4.1.2 if you take this update?
gregsarg said:
See Dr. Ketan and his thread regarding the bootloader on 4.3.....g
Click to expand...
Click to collapse
But that's a thread specifically for 7100-based (non-LTE) variants, right? Whereas we have n7105-based LTE Versions...if I'm missing something please let me know. TIA.
Keeping root after 4.3 update
Jspex said:
General noob question:
How would I go about rooting 4.3 for AT&T? Can someone point me to the thread of it exists? Yes I've tried the search function and no nothing exact came up. I don't want to mess up and then be "that guy" on here crying about making a noob mistake.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
I rooted using this method while still on 4.1.2 and it worked flawlessly.
I then paid for and installed SuperSU Pro and activated "Survival Mode"
Lastly, after the OTA update was COMPLETELY finished, I followed this simple procedure to get root back again.
SuperSU disables Knox for you on 4.3 which is also nice. I should have qualified here that I am COMPLETELY stock other than root. I have not "frozen" any apps., deleted any Samsung provided files, etc. and I have stock bootloader and stock recovery. This will likely NOT work if you have done any of those things.
Is there a flashable version of this? If not, can somebody make one? Thanks.
I'm running a custom rom and rollouts/updates from vendors freak me out because I don't trust not one of them. Knowing AT&T they have thrown in some bit of encryption that locks the bootloader. I understand this might not be the case this time but I do know none of them can be trusted.
Now if you excuse me, I'm 1/2 done with 1984 the book and my tin foil hat is making me itch.
Guys I need help I am stuck, I am using unlock att with tmobile, I check software update but it days interrupted, and I even tried with kies but it's not connecting at all, I tried 2 pcs.... Any help... What to do to update it... Please
Sent from my SAMSUNG-SGH-I317 using Tapatalk
rsalan said:
Is there a flashable version of this? If not, can somebody make one? Thanks.
Click to expand...
Click to collapse
The update has only been out for a few hours and we are asking for .zip files already ??
Sheesh...
Give the devs some time to pull it apart and clean it up...unless you would like Knox and a bootloader lock ??
gregsarg said:
the update has only been out for a few hours and we are asking for .zip files already ??
Sheesh...
Give the devs some time to pull it apart and clean it up...unless you would like knox and a bootloader lock ??
Click to expand...
Click to collapse
amen! Preach it my brethren
sent from my sgh-i317 using sky blue tapatalk
marckusdavis said:
I rooted using this method while still on 4.1.2 and it worked flawlessly.
I then paid for and installed SuperSU Pro and activated "Survival Mode"
Lastly, after the OTA update was COMPLETELY finished, I followed this simple procedure to get root back again.
SuperSU disables Knox for you on 4.3 which is also nice.
Click to expand...
Click to collapse
I have a few questions for you and/or those more in the know:
If I were to do this same thing, would I be able to flash a custom recovery (like TWRP) and/or flash custom ROM's/Kernels like I can already do now? One of my main concerns is that the stock kernel doesn't support Boeffla Sound, and that really makes for better audio on this device...might as well take full advantage of that Wolfson DAC...
I have to admit, it would be nice to be able to use pure AT&T stock, but rooted, as a base...this is why I loved the old CleanROM AT&T SE so much...
TIA for any guidance you can give on this.
Side note: after ODIN'ing back to 4.1.2 MA4, it says I have a 741MB update I can take....I'm sure that's this 4.3 update...Culpeper, VA here.
marckusdavis said:
I rooted using this method while still on 4.1.2 and it worked flawlessly.
I then paid for and installed SuperSU Pro and activated "Survival Mode"
Lastly, after the OTA update was COMPLETELY finished, I followed this simple procedure to get root back again.
SuperSU disables Knox for you on 4.3 which is also nice.
Click to expand...
Click to collapse
I did the same as marchusdavis but it resulted in a total disaster. After I downloaded the OTA update from AT&T I restarted my phone and it installed through CWM-Touch. At the end it asked if I wanted to ensure root was maintained and of course I said "yes" there (as well as through my SuperSU Pro Survival Mode). When it booted, my WiFi no longer works AND I lost root.
If anyway has any advice on how to get to a stock 4.3 from here please let me know!
Ugh, having trouble updating atm.
Goes up to 30%, then my phone reboots and says
"The update was interrupted" or something like that
On stock 4.1.2 rooted with stock recovery if anyone can help.
chris.l.naish said:
I have a few questions for you and/or those more in the know:
If I were to do this same thing, would I be able to flash a custom recovery (like TWRP) and/or flash custom ROM's/Kernels like I can already do now? One of my main concerns is that the stock kernel doesn't support Boeffla Sound, and that really makes for better audio on this device...might as well take full advantage of that Wolfson DAC...
I have to admit, it would be nice to be able to use pure AT&T stock, but rooted, as a base...this is why I loved the old CleanROM AT&T SE so much...
TIA for any guidance you can give on this.
Side note: after ODIN'ing back to 4.1.2 MA4, it says I have a 741MB update I can take....I'm sure that's this 4.3 update...Culpeper, VA here.
Click to expand...
Click to collapse
I don't believe so, as I am completely stock, bootloader and all. If you want to install other ROMs, you'd need to use a different method I believe. Likely downloading this update either via Kies or something else, and use ODIN to do everything. If you search around a bit on XDA, you'll probably find someone who has done it successfully and posted how. While I like custom ROMs, I have not had a need to use one yet on this device. However, if Samsung doesn't eventually give us Air Command, that might be enough to make me try it!
Is it possible to get the official update from the leak or do I have to downgrade to 4.1.2? I tried updating from the leak but it said it's the latest version.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
You can successfully roll back to 4.4.4 via 5.0.2.
5.1.1 BLOCKS the ability to DOWNGRADE.
I will keep this post updated as we receive OTA's in the future.
Heres a link to the stock at&t firmware,
http://forum.xda-developers.com/note-4-att/general/stock-to-stock-odin-flashable-tested-t2915915
Dont forget to hit the Thanks button Please!
Thank God and thank you for the share! Now I can update to Lollipop and let the devs work on root in peace knowing I can downrgrade to kit kat!
iamdeon23 said:
Thank God and thank you for the share! Now I can update to Lollipop and let the devs work on root in peace knowing I can downrgrade to kit kat!
Click to expand...
Click to collapse
Yea i figured its the least i can do since i cant work on an actual root exploit. Atleast we know its safe to update to lollipop!!
yess
thank god. im really hoping this lollipop update is decent im at 85/181 in optomizing apps prebootup.
im so excited for this root exploit though its been too long.
Do you have to do anything to be able to rollback before you update?
datoneazn said:
Do you have to do anything to be able to rollback before you update?
Click to expand...
Click to collapse
maybe backup your data, etc. after i rolled back my device was factory reset
DroidHelp101 said:
Hey guys,
I know alot of people are receiveing the update to 5.0.1 today, i wanted to confirm that i updated to 5.0.1 and i was successfully able to roll back to 4.4.4 VIA Odin. The Integer overflow our devs are working on to root our device is patched in 5.0.1 but we can successfully roll back to 4.4.4!!
This is good as far as rooting goes. we can successfully roll back to 4.4.4 when our Devs release a root exploit.
EDIT: Heres a link to the stock at&t firmware,
http://forum.xda-developers.com/note-4-att/general/stock-to-stock-odin-flashable-tested-t2915915
Dont forget to hit the Thanks button Please!
Click to expand...
Click to collapse
Hopefully we can get an AT&T Note 4 lollipop stock odin.tar to flash back to that too if necessary.
I'd love to see a L odin.tar for this. My phone fails update everytime so I'm either going to need to odin it or go to the Samsung experience shop.
So what happens when everybody updates to lollipop if that updates the bootloader even if you flashback to 4.4.4 if they come out with root for the 4.4.4 bootloader won't that mess up the newer bootloader for lolly pop?
terpin32 said:
So what happens when everybody updates to lollipop if that updates the bootloader even if you flashback to 4.4.4 if they come out with root for the 4.4.4 bootloader won't that mess up the newer bootloader for lolly pop?
Click to expand...
Click to collapse
Your phone blows up and life will cease to exists as we know it.
But seriously know one knows, you know the risks when updating. If you're waiting for root and its that important to you then wait.
Quit trashing other threads with this question. Asking the same thing 5 times in 5 different threads is ridiculous.
cltycoon said:
Your phone blows up and life will cease to exists as we know it.
But seriously know one knows, you know the risks when updating. If you're waiting for root and its that important to you then wait.
Quit trashing other threads with this question. Asking the same thing 5 times in 5 different threads is ridiculous.
Click to expand...
Click to collapse
How is my question talking trash? I was just curious ive ran into this problem b4 so and im dealing without root Ive learned to work around it like everyone else and the reason i did that was cuz sometimes ppl don't see it and the same ppl don't look at it and just wanted to get word out in case it does mess up root if you update then try to roll back and cant root becuz you have a new bootloader
terpin32 said:
How is my question talking trash? I was just curious ive ran into this problem b4 so and im dealing without root Ive learned to work around it like everyone else and the reason i did that was cuz sometimes ppl don't see it and the same ppl don't look at it and just wanted to get word out in case it does mess up root if you update then try to roll back and cant root becuz you have a new bootloader
Click to expand...
Click to collapse
He never accused you of talking trash. He said you are trashing all these threads by copy/pasting the same post into like 5 or 6 different threads. In other words, you're making messes and getting annoying. Ask the question in one thread, and don't spam all Lollipop-related threads. So many threads are active right now anyways, so someone is bound to see your post.
My bad guys i was just trying to see what ppl had to say and i was gonna ask if any one with the galaxy gear was having any luck with it working on lollipop
---------- Post added at 07:25 PM ---------- Previous post was at 07:24 PM ----------
I just hated to see ppl update and cant root their phone wasn't trying to ruffle any feathers
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I updated to lollipop and now this keeps happening
Sent from my SAMSUNG-SM-N910A using Tapatalk
NCzerniak83 said:
View attachment 3227735
I updated to lollipop and now this keeps happening
Sent from my SAMSUNG-SM-N910A using Tapatalk
Click to expand...
Click to collapse
I connect to home wifi network and update apps. Its gone. My work wifi block something so that appeared the whole day
I rolled back to 4.4.4 and I can't get any OTA updates; not even the NK3 update released in January. I even tried using an ATT sim. Anyone else with this problem?
NCzerniak83 said:
View attachment 3227735
I updated to lollipop and now this keeps happening
Sent from my SAMSUNG-SM-N910A using Tapatalk
Click to expand...
Click to collapse
Me as well. All yesterday and then this morning and finally this afternoon magically my phone saw a play services update which I installed and now the issue seems fixed. :silly:
flaystus said:
Me as well. All yesterday and then this morning and finally this afternoon magically my phone saw a play services update which I installed and now the issue seems fixed. :silly:
Click to expand...
Click to collapse
I don't know what fixed the issue on my phone, but I just waited and it stopped happening. Works for me ?
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
Could someone please post a system dump for Att note 4. Thanks
Sent from my SM-N910T using XDA Free mobile app
DroidHelp101 said:
Hey guys,
I know alot of people are receiveing the update to 5.0.1 today, i wanted to confirm that i updated to 5.0.1 and i was successfully able to roll back to 4.4.4 VIA Odin. The Integer overflow our devs are working on to root our device is patched in 5.0.1 but we can successfully roll back to 4.4.4!!
This is good as far as rooting goes. we can successfully roll back to 4.4.4 when our Devs release a root exploit.
EDIT: Heres a link to the stock at&t firmware,
http://forum.xda-developers.com/note-4-att/general/stock-to-stock-odin-flashable-tested-t2915915
Dont forget to hit the Thanks button Please!
Click to expand...
Click to collapse
Is there a link to the 5..0.1 ROM to flash with ODIN? I am using an MVNO
Mainly posting this here for any devs that want it.
I have removed the check for stock recovery as well as added a build fingerprint check for TWRP to allow this update to take without Stock recovery.
This is the update.zip that T-Mobile pushed out starting today (10/05/15). If you are not on D85120E stock (might work with root, I have not checked) do not flash this as it should fail but it's your choice to risk it.
Download MD5: 5858ab8aa2aedce3e74051ae365596b4
found a link to a KDZ here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KAsp3rd said:
Mainly posting this here for any devs that want it.
I have removed the check for stock recovery as well as added a build fingerprint check for TWRP to allow this update to take without Stock recovery.
This is the update.zip that T-Mobile pushed out starting today (10/05/15). If you are not on D85120E stock (might work with root, I have not checked) do not flash this as it should fail but it's your choice to risk it.
Download MD5: 5858ab8aa2aedce3e74051ae365596b4
found a link to a KDZ here
Click to expand...
Click to collapse
Mind me asking what updates/upgrades were made from E to G?
---------- Post added at 09:28 PM ---------- Previous post was at 09:23 PM ----------
yanowman said:
Mind me asking what updates/upgrades were made from E to G?
Click to expand...
Click to collapse
How would I just jump from either stock rooted 20e OR stock SR5.1.... CAN I JUST flash in twrp or...... Need some instructions for this update plzz
Looks like this is to patch Stagefright.
https://support.t-mobile.com/docs/DOC-11935
yanowman said:
Mind me asking what updates/upgrades were made from E to G?
---------- Post added at 09:28 PM ---------- Previous post was at 09:23 PM ----------
How would I just jump from either stock rooted 20e OR stock SR5.1.... CAN I JUST flash in twrp or...... Need some instructions for this update plzz
Click to expand...
Click to collapse
I would not attempt to flash this over any custom rom. With stock it is as simple as flashing in twrp. However as I said I did not test with root on 20e
Root 20G?
KAsp3rd said:
I would not attempt to flash this over any custom rom. With stock it is as simple as flashing in twrp. However as I said I did not test with root on 20e
Click to expand...
Click to collapse
How did you test it than. Coming from 20e without root? How does one flash it without root.... I'm guessing this is a dumb question however
yanowman said:
How did you test it than. Coming from 20e without root? How does one flash it without root.... I'm guessing this is a dumb question however
Click to expand...
Click to collapse
I had a stock 20e build without root however I did have TWRP. Which is why I removed the recovery check
Sent from my LG-D851 using Tapatalk
KAsp3rd said:
I had a stock 20e build without root however I did have TWRP. Which is why I removed the recovery check
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
So if i flash this stock rom...
https://www.androidfilehost.com/?w=...9fd46fa47b9c0a72d7ee44cb0635410d991e6dfa7fd52
Without supersu
Than boot into twrp and flash the zip it should work?
Just tried on sr and it failed
wooooo
Confirmed working for an idiot like me
Yes!!!! With new update my wificalling works again.
Sent from my LG-D851 using XDA Free mobile app
Just received this OTA. Dumb question but how can I update with my rooted, but stock ROM? I'm guessing I simply can't accept the OTA...
yanowman said:
Confirmed working for an idiot like me
Click to expand...
Click to collapse
how flash 20G?
yanowman said:
Confirmed working for an idiot like me
Click to expand...
Click to collapse
So, how long should it take to boot after flashing this? My phone is stuck on the white T-Mobile boot screen. I think its been sitting there for at least 15 minutes.
EDIT: I gave up waiting. I reflashed the stock rom over this and now I'm waiting though the optimizing process. Why didn't I make a backup first??
EDIT2: I redownloaded it, made a backup and tried to flash it again. This time we're good. Optimizing apps as we speak.
Does anybody know if this fixes the "Settings has stopped" error when going to the tethering menu in Settings?
So I need some clarification please and have a couple of questions. I have Tmo G3 (D851) running stock 20e, but it is rooted. I also have TWRP. Can I just flash this update.zip using TWRP and all will be fine or not? I of course will do a full backup before I start, but wonder about data. Has anyone learned whether this works on rooted devices yet? I think I am already Stagefright protected because I run Textra for SMS and MMS (I do NOT run stock messaging), but should I upgrade to this? I look forward to some expert opinions. Thanks to all.
hodgestl said:
So I need some clarification please and have a couple of questions. I have Tmo G3 (D851) running stock 20e, but it is rooted. I also have TWRP. Can I just flash this update.zip using TWRP and all will be fine or not? I of course will do a full backup before I start, but wonder about data. Has anyone learned whether this works on rooted devices yet? I think I am already Stagefright protected because I run Textra for SMS and MMS (I do NOT run stock messaging), but should I upgrade to this? I look forward to some expert opinions. Thanks to all.
Click to expand...
Click to collapse
I had unrooted (through supersu script) in order to setup Android pay. I would recommend you do the same, simply because this has the root script at the end of it anyhow...
So, unroot (setup Android Pay if you care to), flash, reroot...move on with life :good:
mjfrank said:
I had unrooted (through supersu script) in order to setup Android pay. I would recommend you do the same, simply because this has the root script at the end of it anyhow...
So, unroot (setup Android Pay if you care to), flash, reroot...move on with life :good:
Click to expand...
Click to collapse
Did all your data stay intact? After the update I assume you wiped cache and Dalvik? Thanks for your answers.
hodgestl said:
Did all your data stay intact? After the update I assume you wiped cache and Dalvik? Thanks for your answers.
Click to expand...
Click to collapse
No wipes necessary ('dirty flash'). Data stays intact. It will optimize all your apps on initial boot though.
mjfrank said:
No wipes necessary ('dirty flash'). Data stays intact. It will optimize all your apps on initial boot though.
Click to expand...
Click to collapse
Thanks for the reply. I guess I will do a full TWRP backup and move forward. Thanks again
Running rooted stock 5.0.1 20E. I've disabled supersu and booted back into TWRP to flash and I'm getting this error when I try to flash the zip:
"Package expects build fingerprint of lge/g3_tmo_us/g3:5.0.1/LRX21Y/151451134d07b:user/release-keys or lge/g3_tmo_us/g3:5.0.1/LRX21Y/15227151285fc:user/release-keys; this device has LG/omni-d851/d851:4.4.4/KTU84P/2:eng/test-keys."
Not familiar enough with the file system to know exactly what that is, but I'm guessing some file on my device is reporting I'm still on 4.4.4? Could that be a kernel issue? I did at one point have a custom kernel, but I went back to stock after that and re-rooted? Just hoping to avoid a full wipe and redo...
Guys,
Am I the only person who has a 10.1? I have a stock rooted, factory SIM unlocked V930.
I love the tablet, and am really surprised. I have scoured the internet for any bootloader unlock/custom recovery interest or dev interest in general and there's nothing. Is anyone else out there with any info?
Thanks guys peace
Att locked bootloader is across the board killing development for att devices.
Sent from my SAMSUNG-SM-N920A using XDA-Developers mobile app
You have a rooted v930? How did you accomplish this?
Darksynz said:
You have a rooted v930? How did you accomplish this?
Click to expand...
Click to collapse
I first installed Titanium backup after rooting wit KingoRoot. Not to be mistakes for Kingroot!. After I froze the front-end for Kingoroot using TiBU, and installed SuperSU, I then made SuperSU a system app again through TiBU. Next step was to uninstall the Kinguser app in Its entirety. Finally, I rebooted and started Super SU, updated binaries and once again rebooted. After that SuperSU was the default and only Superuser app. I was worried and skeptical at first but it was flawlessly perfect and performed exactalr as it should have. I hope that helps.
electrojas said:
I first installed Titanium backup after rooting wit KingoRoot. Not to be mistakes for Kingroot!. After I froze the front-end for Kingoroot using TiBU, and installed SuperSU, I then made SuperSU a system app again through TiBU. Next step was to uninstall the Kinguser app in Its entirety. Finally, I rebooted and started Super SU, updated binaries and once again rebooted. After that SuperSU was the default and only Superuser app. I was worried and skeptical at first but it was flawlessly perfect and performed exactalr as it should have. I hope that helps.
Click to expand...
Click to collapse
And this works even with the marshmallow updated firmware? I just purchased mine about a week ago. If you have any links please direct me. Thanks
Sent from my SM-N915T using Tapatalk
I can confirm that this method doesn't work anymore. Maybe it use to work on a different version of android.
Can y'all pull the marshmallow rom?
Well, too bad nothing ever materialized with a custom recovery for the v930. I really like the device. Has anyone else dug up any info? AT&T can smoke pole!
system image
Can i possibly get a copy of your system image so i can have my v930 back? Right now i am running v935 and it doesnt have the same (32 gb)storage. It only has 16gb. Please pm me. Thanks in advance.
OTE=electrojas;67063208]Guys,
Am I the only person who has a 10.1? I have a stock rooted, factory SIM unlocked V930.
I love the tablet, and am really surprised. I have scoured the internet for any bootloader unlock/custom recovery interest or dev interest in general and there's nothing. Is anyone else out there with any info?
Thanks guys peace[/QUOTE]
I to would love to get ahold of the 6.0 ota img.
I may be able to get ahold of the OTA. I have a tablet that hasn't been upgraded. How would I go about grabbing the file?
electrojas said:
Guys,
Am I the only person who has a 10.1? I have a stock rooted, factory SIM unlocked V930.
I love the tablet, and am really surprised. I have scoured the internet for any bootloader unlock/custom recovery interest or dev interest in general and there's nothing. Is anyone else out there with any info?
Thanks guys peace
Click to expand...
Click to collapse
I just got this tablet and love it too.
I've also scoured the internet and can't find much on it as well.
The only thing that confuses me is the IR BLASTER doesn't seem to be turned on via the software.
Anyone else seeing that?
My LG G Pad X was rooted with kingroot and now I can't update to Marshmallow. Is there any way to get around this? Or am I screwed? I tried the update tool and nothing came from it.
LG V935 root Success
Hello, I used Kingroot to try a long time, have not been successful, today, I found that China's 360root is very good tool. Incredibly successful. I feel very happy. Although there is no superusu tool, but now it has the highest authority, I am still very happy.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jabin0926 said:
Hello, I used Kingroot to try a long time, have not been successful, today, I found that China's 360root is very good tool. Incredibly successful. I feel very happy. Although there is no superusu tool, but now it has the highest authority, I am still very happy.
Click to expand...
Click to collapse
Were you running Android 6.0 ??
I need to root my tablet on 6.0 to sim unlock
Kingroot worked for me, I'm on Android 5.1
re V935 Image
garrett69 said:
Can i possibly get a copy of your system image so i can have my v930 back? Right now i am running v935 and it doesnt have the same (32 gb)storage. It only has 16gb. Please pm me. Thanks in advance.
OTE=electrojas;67063208]Guys,
Am I the only person who has a 10.1? I have a stock rooted, factory SIM unlocked V930.
I love the tablet, and am really surprised. I have scoured the internet for any bootloader unlock/custom recovery interest or dev interest in general and there's nothing. Is anyone else out there with any info?
Thanks guys peace
Click to expand...
Click to collapse
[/QUOTE]
---------- Post added at 10:15 AM ---------- Previous post was at 10:08 AM ----------
garrett69 said:
Can i possibly get a copy of your system image so i can have my v930 back? Right now i am running v935 and it doesnt have the same (32 gb)storage. It only has 16gb. Please pm me. Thanks in advance.
OTE=electrojas;67063208]Guys,
Am I the only person who has a 10.1? I have a stock rooted, factory SIM unlocked V930.
I love the tablet, and am really surprised. I have scoured the internet for any bootloader unlock/custom recovery interest or dev interest in general and there's nothing. Is anyone else out there with any info?
Thanks guys peace
Click to expand...
Click to collapse
[/QUOTE]
Can you put me in the direction of the V935 image that you mention? I've bricked my V930 by using the wrong version of Kingroot (don't use the new version 5) and there doesn't seem to be any V930 images anywhere on this planet. Right now I'd settle for anything that will give my V930 some wheels again. A V935 image would do the job just fine. Many thanks.
Joshy8 said:
I may be able to get ahold of the OTA. I have a tablet that hasn't been upgraded. How would I go about grabbing the file?
Click to expand...
Click to collapse
Install Flashfire and run it, or use nandroid on a windows computer. Either will do the job nicely. And you will be the first to help all those ppl with bricked V930 tablets )
Do that first and then we can give you instructions on the next step. Many thanks, John.
Someone grab the 6.0 update please
jdwebb2 said:
Install Flashfire and run it, or use nandroid on a windows computer. Either will do the job nicely. And you will be the first to help all those ppl with bricked V930 tablets )
Do that first and then we can give you instructions on the next step. Many thanks, John.
Click to expand...
Click to collapse
I can do this, but how can I give you an image without my data partition?