I just upgraded to CM10 yesterday. In order for me to get my school email on my phone I am required to have a secure lockscreen. I set up pattern unlock, but now i have two lockscreens. When I turn on my phone I get the regular slide unlock, then it takes me to the pattern unlock screen. Is there a way to remove the slide unlock, or better yet, a way to bypass the password security policy for email?
duckydd said:
I just upgraded to CM10 yesterday. In order for me to get my school email on my phone I am required to have a secure lockscreen. I set up pattern unlock, but now i have two lockscreens. When I turn on my phone I get the regular slide unlock, then it takes me to the pattern unlock screen. Is there a way to remove the slide unlock, or better yet, a way to bypass the password security policy for email?
Click to expand...
Click to collapse
Go to "Settings" -> "Lock screen" -> "Screen security" and uncheck "Show widgets before unlock". You will now have only the pattern unlock screen :victory:
rysport said:
Go to "Settings" -> "Lock screen" -> "Screen security" and uncheck "Show widgets before unlock". You will now have only the pattern unlock screen :victory:
Click to expand...
Click to collapse
Excellent tip!
I updated my AT&T Note II to KitKat 4.4.2 last night, via AT&T OTA update.
According to the new features list, I should now be able to access the camera app from the lock screen, right?
But now joy.
All my Googling thus far indicates that I should first enable lock screen widgets by going to "Settings -> Security", and turn on a check-box for "Enable Widgets". I have no such option, or check-box, on the "Settings -> Security" page. And I no such similar options on the "Settings -> Lock screen" page either.
I've also seen instructions (albeit for other Samsung devices) that seem to indicate that I should first disable (or turn off) the lock screen altogether. In other words, set the lock screen to "None". And then re-enable it. It seems that I can not set the lock screen option to "None", after the KitKat upgrade. In other words, it seems that after the KitKat update, I am now forced to choose either Pin or Password lock screen. I have only two options available on the "Settings -> Lock screen -> Screen lock" page now - Pin, or Password. All other options are gray'd out, saying "Turned off by administrator, encryption policy or credential storage".
Anybody else seeing this after the KitKat upgrade?
Anybody have any hints on how to get the camera, or any other, lock screen widgets to show up on the lock screen?
EDIT: Solution found. See post #11 below
pdfruth said:
I updated my AT&T Note II to KitKat 4.4.2 last night, via AT&T OTA update.
According to the new features list, I should now be able to access the camera app from the lock screen, right?
But now joy.
All my Googling thus far indicates that I should first enable lock screen widgets by going to "Settings -> Security", and turn on a check-box for "Enable Widgets". I have no such option, or check-box, on the "Settings -> Security" page. And I no such similar options on the "Settings -> Lock screen" page either.
I've also seen instructions (albeit for other Samsung devices) that seem to indicate that I should first disable (or turn off) the lock screen altogether. In other words, set the lock screen to "None". And then re-enable it. It seems that I can not set the lock screen option to "None", after the KitKat upgrade. In other words, it seems that after the KitKat update, I am now forced to choose either Pin or Password lock screen. I have only two options available on the "Settings -> Lock screen -> Screen lock" page now - Pin, or Password. All other options are gray'd out, saying "Turned off by administrator, encryption policy or credential storage".
Anybody else seeing this after the KitKat upgrade?
Anybody have any hints on how to get the camera, or any other, lock screen widgets to show up on the lock screen?
Click to expand...
Click to collapse
Go to settings my device lockscreen shortcuts turn on camera
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
06SilveradoZ71 said:
Go to settings my device lockscreen shortcuts turn on camera
Click to expand...
Click to collapse
Thanks for the suggestion 06Silverado... but no joy.
There is no such option on the Settings -> Lock screen -> Lock screen widgets page.
Here is what I see (see attached screen-shots)
1 - The Settings [My device] page
Followed by tapping on Lock screen
2 - The Settings [My device] -> Lock screen page
Followed by tapping on lock screen widgets
3 - The Settings [Mydevice] -> Lock screen -> Lock screen widgets page
pdfruth said:
Thanks for the suggestion 06Silverado... but no joy.
There is no such option on the Settings -> Lock screen -> Lock screen widgets page.
Here is what I see (see attached screen-shots)
1 - The Settings [My device] page
Followed by tapping on Lock screen
2 - The Settings [My device] -> Lock screen page
Followed by tapping on lock screen widgets
3 - The Settings [Mydevice] -> Lock screen -> Lock screen widgets page
Click to expand...
Click to collapse
Are you on ota 4.4.2? I am & this is what it looks like
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
06SilveradoZ71 said:
Are you on ota 4.4.2? I am & this is what it looks like
Click to expand...
Click to collapse
Very interesting... your Settings -> Lock screen page looks very different from mine.
In answer to your question... Yes, I took the ota 4.4.2 update last night.
Here is a screen-shot of my Settings -> About device page
And... if I go to the bottom of the Settings -> About device -> Status page, it says "Official"
I wonder what could be causing the difference????
06SilveradoZ71 said:
Are you on ota 4.4.2? I am & this is what it looks like
Click to expand...
Click to collapse
It also looks like you have a Lock screen = Swipe.
That's not even an option on my device (it's gray'd out, and says Turned off by administrator, encryption policy or credential storage).
As shown in the attached screen-shot
I wonder if a security policy of some sort got installed on my device. It's a personal phone (as in not managed by my employer's MDM solution), so I'm not sure how any such policy would have gotten installed. I certainly didn't knowingly do so.
pdfruth said:
Very interesting... your Settings -> Lock screen page looks very different from mine.
In answer to your question... Yes, I took the ota 4.4.2 update last night.
Here is a screen-shot of my Settings -> About device page
And... if I go to the bottom of the Settings -> About device -> Status page, it says "Official"
I wonder what could be causing the difference????
Click to expand...
Click to collapse
Take the pin code lock off & see if it changes maybe thats why
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
06SilveradoZ71 said:
Take the pin code lock off & see if it changes maybe thats why
Click to expand...
Click to collapse
I would, if I could... I can't select a screen lock type of "None" it's disabled (if you look at the screen-shot in me previous post, notice that "None" is gray'd out).
pdfruth said:
I would, if I could... I can't select a screen lock type of "None" it's disabled (if you look at the screen-shot in me previous post, notice that "None" is gray'd out).
Click to expand...
Click to collapse
Damn idk then is it a company phone or something? Idk why it would be greyed out like that its wierd mine isnt
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
pdfruth said:
I would, if I could... I can't select a screen lock type of "None" it's disabled (if you look at the screen-shot in me previous post, notice that "None" is gray'd out).
Click to expand...
Click to collapse
I put a pin code on then removed it & still not greyed out so who knows
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
I think I figured out how to re-enable all the screen lock types.
Following the suggestion in this stackexchange thread... I cleared credential storage by going to Settings -> Security -> Clear credentials
Now I'm able to set a screen lock = Swipe
As in, all those screen lock types that were gray'd out are no longer gray'd out.
And I'm finally able to add the Camera widget to the lock screen
Holy crap... what an ordeal that was.
I wonder how the heck my credential storage got dorked.
Oh well... moving on.
Thanks for all your help/suggestions 06Silverado
Having another set of screen-shots to compare/contrast, helped alot.
pdfruth said:
I think I figured out how to re-enable all the screen lock types.
Following the suggestion in this stackexchange thread... I cleared credential storage by going to Settings -> Security -> Clear credentials
Now I'm able to set a screen lock = Swipe
As in, all those screen lock types that were gray'd out are no longer gray'd out.
And I'm finally able to add the Camera widget to the lock screen
Holy crap... what an ordeal that was.
I wonder how the heck my credential storage got dorked.
Oh well... moving on.
Thanks for all your help/suggestions 06Silverado
Having another set of screen-shots to compare/contrast, helped alot.
Click to expand...
Click to collapse
No problem always willing to help
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Camera widget doesn't show
Hi all,
I am having the similar problem here where my camera shortcut on lockscreen doesn't show up
However I am able to choose other lockscreen option such as pattern, pin, password, etc...
I have read the solution given from pdfruth in post #11, but the "clear credential" option is disabled
I just update my note 2 into kitkat 4.4.2 and manage to root successfully
my problem is "shortcut" option is missing so that I cannot have the camera shortcut or other shortcut on my lockscreen
Please assist...
I accidentally activated the 'guest' account and when I switched back to my normal account the screen lock had been activated in swipe mode. I don't normally have screen lock switched on but there isn't a 'None' option in the screen lock options any more. I'm on the stock 5.1.1 rom on a P605.
Can anyone help ?
EDIT Solved it. Switched off 'dual clocks' in clock widget options and 'None' reappeared
I have been searching to set screen lock to "None" after update to RMX2081PU_11.A.39 from RMX2081PU_11.A.33 and could not find under Settings. It seems to have been implemented differently under Developer Options under Additional Settings to "Do not use Lock Screen" with enable/disable option. However if anyone opts for any type of password setting with or without FP or FU this option is automatically disabled if it was enabled.
Or the "None" setting has been removed from user settings intentionally.