ive installed the multi rom manager for the sprintm8 ..after reading up on everything..its the latest test version pose to help with hanging up when booting secondary roms..i still freeze up bout everyother time trying to boot from the manager app to secondary rom..i tried flashing updated firmware from hboot ..the updated firmware was the one updated in aug..hope that was the latest..still have issiue..i have bad boyz sense as base rom with elementalx as kernal with patch..have pacman as secondary..everytime ive attempted to make changes like the kitkat sd card fix..or install xposed framwork..ive had to wipe data and start over cause after rebooting would just go black screen..thinking i bricked it..also tried flashing liquid smooth as third rom..did fine..but no mobile data or wifi worked..im sticking to aosp roms cause ive read they all mostly work although id love to have another sence based rom as well..but the ones i tried never booted..read how its possible to alter the zip then repack..but sounds to advanced for me..question is do i need to flash anotherr kernal in my aosp roms to get it all working..i know the base rom gets the elementalx kernal with patch....but do i need another kernal for other roms to get everything working..and why am i freezeing dureing booting up from multirom manager into the aosp secondary roms?
Related
well i am a little lost... i tried to update the kernel to the newest version of savaged zen. But got stuck on the white screen, so i went back and wiped both catches again, then i got to the boot animation and now thats looping.. okay so i made a backup before starting but now after wiping everything and restoring the backup is boot looping too. Any suggestions?
Try another kernel. I am using the BCblend kernel from november, it's awesome and very stable. Once you get it booted, go into your advanced wifi settings and set your sleep policy to never.
well... my backup boot loops too... wouldnt the backup have the old kernel?
It's possible your phone doesn't like that kernel either, mine didn't. How long were you running it before flashing the new kernel? I would try at least a couple more kernels and if you still can't get it booted then wipe and start over. What version of MIUI are you running?
In my opinion...if you have a good working kernel do not change it. From what ive seen every custom rom is based off a stock rom that comes with a kernel. Usually only custom kernels that match the rom version work well. So it could be the rom and the kernel dont work well together. One thing is nobody seems to list which kernel version is from which rom. So its hard to tell. Also I think your pri version will mess with compatability also. Basically newest rom versions should work with newest kernels. But if your on an older rom...the older kernels will probably work better. And usually kernels come out (it seems) before rom versions. Like new miui kernel supports 4g, but the rom does not support it yet. Also nandroid? backups should have the kernel also. Not sure bout miui backup. But wiping and installing it fresh usually works well. If not you know the deal..wipe everything..then flash the rom..and start over So.....find a good one...keep it=no issues
Evo - Myn 2.2 RLS 3 - Clockwork - HBoot .76
Hey guys i have a samsung i747 from rogers and i'm trying to install custom roms. I've obviously rooted it and installed CM recovery and downloaded roms and gapps. So far i've tried liquidsmooth 2.8. Avatar Rom. Cyanogen. but nothing seems to be working. Every single one of the them keeps telling me that my setup wizard had crashed and my gapps weren't working. I earlier had a Status 7 error installing cyano and avatar so i flashed d2att's 07.05.13 kernel, but that didn't seem to help. I tried running a different version of the clockworkmod recovery too. I've hardly ever "dirty" flashed. Someone help me out here i hate custom roms!!!
Wipe
Data
Cache
Delvik Cache
and Factory Reset.
Make sure you're flashing the correct GApps for android 4.2.x
Flashing a kernel has nothing to do with a status 7 error.
A status 7 error points to a outdated recovery or bootloader.
You should get ANY errors.
If you hate flashing why do it??
I honestly don't get that...
If you're here to make your phone to look "cool" you're in the wrong place.
Galaxy S3 / AoCP / V4A / Turbocharged
duoblade said:
Hey guys i have a samsung i747 from rogers and i'm trying to install custom roms. I've obviously rooted it and installed CM recovery and downloaded roms and gapps. So far i've tried liquidsmooth 2.8. Avatar Rom. Cyanogen. but nothing seems to be working. Every single one of the them keeps telling me that my setup wizard had crashed and my gapps weren't working. I earlier had a Status 7 error installing cyano and avatar so i flashed d2att's 07.05.13 kernel, but that didn't seem to help. I tried running a different version of the clockworkmod recovery too. I've hardly ever "dirty" flashed. Someone help me out here i hate custom roms!!!
Click to expand...
Click to collapse
I would get TWRP recovery.. wipe dalvik / factory reset. and re-flash your rom.. I'm on Rogers as well and the status 7 error means that your recovery / bootloader is outdated.
So start by getting the most recent TWRP. I got it from goo.
btw: if you don't like custom rom, i suggest going to the sammobile site and getting your factory firmware. Use Odin to reflash back to stock. That should solve your hiatus towards custom roms...
correction
thanks guys but idk i just tried flashing a custom rom at 4.1.2 and then went up from the there and it was fine... for the status 7 i just adjusted the coding for it so it didn`t have to check the model and this was typed up like at like 2 in the morning where i`m from i meant to say i hate stock roms LMAO:silly:
duoblade said:
thanks guys but idk i just tried flashing a custom rom at 4.1.2 and then went up from the there and it was fine... for the status 7 i just adjusted the coding for it so it didn`t have to check the model and this was typed up like at like 2 in the morning where i`m from i meant to say i hate stock roms LMAO:silly:
Click to expand...
Click to collapse
sure but its fine custom Roms can be a Pain in the A$$ thats why am running stock rooted stable, great battery life, fast like custom roms, everything is perfect give a try with stock rooted no issues or problems like custom roms
Synergy Rom 4.1.2 w/ Ziggy Kernel using ATT Galaxy S3
HAPPY ROOTIN :cyclops:
So, i have pure stock as my internal rom, as id just like to have it there, but i dont use it, and i've been trying to flash glitch kernel on the 10/6 build of AOKP and 10/08 pacman, and no matter what i do it refuses to flash, everything'll work, but ill boot into the rom, and the kernel will be the stock one that came with the rom. I've made sure i'm flashing the version for the latest CM because the other gives me a blue screen.
Hello, normally I do lots of research and searching in order to figure out problems for myself, but this one I have been stuck on for weeks.
I am on SGH-T999v, here is my issue.
I am trying to use either the latest 1.5 Spirit Rom, or M4 gummy Rom in combination with KTOONSEZ Kernel from here.
If I try to flash the kernel with latest versions of those roms, my baseband says "UNKNOWN" and my IMEI gets zero'd out.
Also it tells me that I have no sim card inserted. I have tried formatting dalvic/cache before and after installation of kernel as well as fixing permissions.
Both Spirit 1.5 and Gummy M4 work no problem without the custom kernel installed.
Also, on only 1.1 Spirit and M3 gummy, am I able to use the custom KT kernel and still have my signal.
Okay now here is the strange part of the problem.
Currently I am using the custom recovery TWRP that lets me use multiboot from here
And after successfully creating a multiboot rom, I go ahead and install Gummy M4 + Gapps + KT Kernel and boot it up, to find out that it actually works perfectly fine.
My baseband shows up, and my signal connects.
Also the version im using of the recovery menu is V2.11
I am just wondering why is it that the rom + custom kernel doesn't work with a regular flash, and that it only seems to work when I multiboot it?
What I want is to not have to create a multiboot rom in order to use this, I want to actually flash these to my phone.
Please help me, anyone who has any idea of what I am talking about..Sorry if I have not been clear enough. Thank you/.
Edit: I also forgot to mention that I have tried flashing the stock modem after the kernel + rom installation through odin, that did nothing.
Hello guys i'm very new to SGS2 T-989 ...and recently got this 2 year old t-mobile sgh t989 ...and it worked fine for few day..till i trid cm11 as first custom rom on it..it too worked well until i used camera...it rebooted itself ...i thought it was because cm11 is nightly ..so i tried carbon rom ...it worked quit fine for a while......for some reson it to started rebooting after a while ..lastly i tried cm10.2 stable ...it worked quite good i updated with cm updater then after it worked good and affter a while it too strted rebooting ...i thaught of power button failure and replaced it too....and finally flashed stock JB 4.1.2 rom ...it works quite well even till now..but the problem is that i cant install custom roms on it ...any help would be honey in my throught...does any one have the issue...???.....................finally got to tell i'm new to this mobile not for customization of roms ..i tried every thing wipe/data/F.Reset/Delvik/System...and even trie super/dark wipe script too.....hmm the matter is unable to install custom roms/////
What recovery are you using? (latest is 2.8.1.0) get it here! Flashable .zip HereWich Gapps? . . . Stock 4.1.2 have some firmware upgrades so maybe you're good to go now if not you might want to try installing stock via Odin (kill any Kies process before using Odin). Find stock rom Here! You will need to register to dwl. Ooh and dont use darkside wipes scripts as they are outdated, you can/will brick your phone. Just wipe system, data, cache, dalvik and .android_secure
I'm using cwm 6.0.4.3 ...and I flashed stock rom the latest ...I have root and cwm backup too...stock rom works completely perfect ....prblm is with custom roms..
Keep a copy of cmw and your backups just in case and try flashing using twrp. Also read this thread , "Have you ever used odin to flash the factory 4.1.2 UVMC6 rom? Some driver stuff was updated in that version and can only be installed with odin."
I've used odin 3.0.7 to falsh stock t989 latest jb 4.1 ...stock rom works 100%....problem is with 4.2+ roms
Ok was just to be sure its not that.. did you try flashing with twrp??
Also what scheduler/governor are you using? I use sio/samsung (personnal choice) (stable, decent battery life, good performance) found out that some combinaisons crash the phone (reboot)
Just now installed twrp that u mentioned and took a backup....now I will try the cus rom process and tell u the result ...hoping this eleminates my problem...and one more thing...im just using stock rooted rom..had not done any changes with cpu governence...and have a decent battery..
Only problem is with KK and 4.3 Roms
I've changed the rrecovery to twrp latest and tried installing from CM9 worked ,
CM 10.1 even worked [4.2.2] :good: [camera crashes while using flash]
Tried 10.2 had bootloops.....whats wrong with 4.3+...help :crying:
Glad to hear that
Camera is known to crash when using the flash and battery is low.
About 10.2 idk .. maybe it has to do with CM itself (search in CM threads). Try some other roms/kernels combinaison. as long as you have a backup of a working setup you should be good. Personnaly i really liked hellkat w/diablo kernel (4.4.2) and Beanstalk w/wildkernel (4.4.4) but as they say , your mileage may vary.
K that's very helpful and ..tnx for ur sugession