I currently have Jandycane 1.3 flashed and I'm having some really weird issues. Every time I turn Wifi on and it detects my network, my router starts to act up causing it to forcefully reset itself, affecting every device connected to it. I didn't have this issue with Jandycane 1.1 ( I did not flash 1.2 ). I'm not sure if this is an issue with the ROM itself or an issue with the updates Hashcode made, as he's been tweaking with the wifi. I did in fact wipe everything before flashing.
Please excuse me if I have overlooked this being answered before, but as I was trying to search for a solution I was constantly greeted with an error about the board having high traffic.
-
It appears now that if I flash back to 1.0 or 1.1, I have this problem as well. I did not have this problem prior to flashing 1.3, and I have wiped everything (cache, dalvik, factory reset, system and SD card)
And just to note, I realize that not everyone is having this issue but myself and some others are.
-
After a few reboots I managed to get Wifi working again on 1.0, but still cannot get it working on any others.
-
Flashed 1.3 over 1.0 making sure to only wipe the two caches and kept wifi on. Upon booting, Wifi now works without a problem. Still not sure what the problem was/is but at least it's resolved for now.
narume said:
I currently have Jandycane 1.3 flashed and I'm having some really weird issues. Every time I turn Wifi on and it detects my network, my router starts to act up causing it to forcefully reset itself, affecting every device connected to it. I didn't have this issue with Jandycane 1.1 ( I did not flash 1.2 ). I'm not sure if this is an issue with the ROM itself or an issue with the updates Hashcode made, as he's been tweaking with the wifi. I did in fact wipe everything before flashing.
Please excuse me if I have overlooked this being answered before, but as I was trying to search for a solution I was constantly greeted with an error about the board having high traffic.
Click to expand...
Click to collapse
Im using 1.3 and it works fine. Try to reflash it
Sent from my Amazon Kindle Fire using XDA Premium HD app
I tried that, thinking it might have been a bad flash but the problem still persists. I also downloaded the ROM again to make sure it wasn't a bad download, but after flashing it, the same problem occurs.
I cannot connect to my router with any of the jelly bean builds it perpetually attempts to connect always saving then going right back to acquiring ip address
After downloading Hashcode's ROM, I can say in good faith that the problem persists in the newer update that Hashcode has done while he was fixing the wifi issues. I did not have this problem on either ROM prior to the recent update, but now Wifi does not work at all and when it is scanning for networks, the second it picks up mine it sends some kind of signal to my router and forces it to constantly reset itself.
narume said:
After downloading Hashcode's ROM, I can say in good faith that the problem persists in the newer update that Hashcode has done while he was fixing the wifi issues. I did not have this problem on either ROM prior to the recent update, but now Wifi does not work at all and when it is scanning for networks, the second it picks up mine it sends some kind of signal to my router and forces it to constantly reset itself.
Click to expand...
Click to collapse
Yeah try any of lithiums builds before the hw codecs were added they connect fine just no hw codecs when he did a sync with the WiFi revision that's what borked it for me and yes my router did crap out on me once as well on the present builds literally shut off then on again or reset of some nature??
My router logs state disconnected reason: deauthenticated
Thepooch said:
Yeah try any of lithiums builds before the hw codecs were added they connect fine just no hw codecs when he did a sync with the WiFi revision that's what borked it for me and yes my router did crap out on me once as well on the present builds literally shut off then on again or reset of some nature??
My router logs state disconnected reason: deauthenticated
Click to expand...
Click to collapse
I finally got one to connect the new one by twa_priv with the Sgt7 enhancements also I did opt out of googles backup service for my tablet in account setup because I noticed that after I was on the net on my WiFi tether it greyed my signal out and I had no net so I reflashed after a full wipe minus the SD card and opted out of Google service and all my connections are good including my home router for me this is a breakthrough the only jelly bean that connects to my home network
I'll give his a go. I didn't flash it as I was worried it would suffer from the same problem as the others recently have started doing, I also noticed a few complaints about the UI force closing. Guess it's really the only JB solution for now until this issue is resolved. I have a Dalvik log in case Hashcode wants to take a peek.
narume said:
I'll give his a go. I didn't flash it as I was worried it would suffer from the same problem as the others recently have started doing, I also noticed a few complaints about the UI force closing. Guess it's really the only JB solution for now until this issue is resolved. I have a Dalvik log in case Hashcode wants to take a peek.
Click to expand...
Click to collapse
The thing I experienced with fc`s of the ui is trying to change it to tablet mode personally I can live with it in phone orientation I just like to test everything all jb ROMs have bugs but no WiFi is a deal breaker for me
Appears I'm having this problem now with every JB rom. 1.0 and 1.1 worked fine prior to flashing 1.3, but now every JB rom I flash, including 1.0 and 1.1 have this problem. I've no clue what is going on.
-
Got it working on 1.0 after a few reboots, but cannot get it working on the others.
-
Flashed 1.3 over 1.0 making sure to only wipe the two caches and kept wifi on. Upon booting, Wifi now works without a problem. Still not sure what the problem was/is but at least it's resolved for now.
WiFi problems here appeared over time
narume said:
I currently have Jandycane 1.3 flashed and I'm having some really weird issues.
Click to expand...
Click to collapse
For me it worked great last night; then when I got home I could not even enable WiFi. On a lark I reflashed 1.3 [with only cache wipe, not /data], and the WiFi started working again, and still is, now.
Even with it working, I'm seeing many wpa_supplicant errors, including:
D/wpa_supplicant( 561): nl80211: survey data missing!
I/wpa_supplicant( 561): wpa_driver_nl80211_driver_cmd: Unsupported command SETSUSPENDMODE 1
Any ideas?
Hey all, having a very odd issue here. I flashed Flinny's 4.2.1 AOSP rom a few days ago, worked absolutely perfectly, today when I turned the radio to use 2g for an app I was testing then rebooted it just bootloops constantly. I have tried wiping/flashing the same rom again, a build of CM10 and another rom in the forum (a sense build), same issue on all, it boots to the welcome screen on AOSP and CM10, and to the home screen on the other rom, then just reboots. I flashed AOSP again without gaps and managed to get to the home screen, I enabled aeroplane mode and it is absolutely fine (as in it doesnt reboot), then if I enable a data connection it just reboots as it had been doing.
Anyone else experienced this as I cant really pin it down to be anything other than a radio issue, even though I have not changed radio image.
This is the link for the logcat, initiated when I disabled aeroplane mode to when the device reboots. http://pastebin.com/R6SpZwWz
Any help very much appreciated.
Cheers
Hi, I have the latest CM12 installed in my tablet, but I have a lot of issues, especially when installing multiple apps or if I try to change the Launcher. It gets into boot loop and there is nothing one can do but re-flash the rom, which is pretty annoying. It has happened to me already 3 times in a short while and I am thinking of flashing LineageOS. However, I hear it is still very buggy, especially the issues with wifi. So I would like to ask which is the least buggy Rom for 7.0 v410 or if there is a way to avoid CM12 from getting the problem with boot loop.
Boot loop has been caused when trying to change Launcher (because trebuchet regularly crashes), when installing x-plore file manager and in a clean flash when I attempted to install multiple apps at the same time. In all cases it got stack in boot loop, or would start only to restart after a while, endlessly.
Finally, I opted for LineageOS 14.1.
I had the 11-11 Nightly for some time and seemed fine. Today I updated to 25-11 Nightly. It feels maybe slightly laggy, but still checking it.
I have also installed "Best WiFi Keeper" app from play store and it generally keeps me connected. However, if connection is lost (e.g at restart or if I get out of range), I have to reconnect manually. I tried few apps for reconnecting but nothing worked. It appears that although the WiFi network is seen, the tablet cannot really re-establish the connection automatically.
I found Nothing stable yet.. In last few days, I have installed CM 12.1, same trouble.. I installed Tipsy and Tesle, unable to install apps from playstore. Tried CM 13 and Lineage OS latest build as you, Wifi Teathering and USB teathering not working and same problem with wifi connectivity. Keed posted if you find something better.. I shall too...
Tesla works great for me. I'm running a lollipop version that's still on androidfilehost; I'm not sure if GZR ever got updated beyond 5.1 for V410.
I've had CM 14.1 (long enough ago it was still CM and not LOS) on the tablet, and it felt like it would get laggy. That could just be from junk my kid installs though, but I don't seem to have that problem with Tesla.
I installed Tesla (Tesla-v410-5.1.1.High_Voltage.2.2.1-Release-20150902.zip from https://androidfilehost.com/?fid=24052804347807214) with open G apps but getting errors while installing apps from Play store(Some error code 963 - tried cleaning cache of playstore, play services download manager, removing google account and adding again - Nothing works). Same situation with tipsy. Any help?
kingzones said:
I installed Tesla (Tesla-v410-5.1.1.High_Voltage.2.2.1-Release-20150902.zip from https://androidfilehost.com/?fid=24052804347807214) with open G apps but getting errors while installing apps from Play store(Some error code 963 - tried cleaning cache of playstore, play services download manager, removing google account and adding again - Nothing works). Same situation with tipsy. Any help?
Click to expand...
Click to collapse
That is probably what I'm running, I don't have my tablet right now. I think I flashed it with opengapps nano. I didn't have to do anything unusual to get play store to work.
Tipsy uses the same base as Tesla and Validus. Since it is persisting across multiple flashes and roms, consider formatting the internal storage if it isn't too much hassle, the TWRP wipe where you have to type "yes" to confirm. Sometimes some remnants in userdata that aren't touched by the normal system/data/cache/dalvik wipe cause problems like this and can persist the way you're describing.
Just make sure you have rom and gapps on an external SD or you have confirmed you can push files to the tablet in TWRP over usb via mtp or adb before you blank the internal storage.
jason2678 said:
That is probably what I'm running, I don't have my tablet right now. I think I flashed it with opengapps nano. I didn't have to do anything unusual to get play store to work.
Tipsy uses the same base as Tesla and Validus. Since it is persisting across multiple flashes and roms, consider formatting the internal storage if it isn't too much hassle, the TWRP wipe where you have to type "yes" to confirm. Sometimes some remnants in userdata that aren't touched by the normal system/data/cache/dalvik wipe cause problems like this and can persist the way you're describing.
Just make sure you have rom and gapps on an external SD or you have confirmed you can push files to the tablet in TWRP over usb via mtp or adb before you blank the internal storage.
Click to expand...
Click to collapse
can you tell me if hotspot and usb tethering is working on tipsy? Thanks.
xdause said:
can you tell me if hotspot and usb tethering is working on tipsy? Thanks.
Click to expand...
Click to collapse
I'm on Tesla, but it has the same base as Tipsy. I don't have data on the tablet so it isn't a 100% conclusive test, but it doesn't seem to work. The switch for USB tethering never turns on. Wifi turns on but never connects properly. My laptop does briefly show connection then disconnects with both USB and wifi tethering. It could be because there is no data connection on my tablet, but looking through dmesg on the laptop gives me the impression that something on the tablet isn't working right.
kingzones said:
I found Nothing stable yet.. In last few days, I have installed CM 12.1, same trouble.. I installed Tipsy and Tesle, unable to install apps from playstore. Tried CM 13 and Lineage OS latest build as you, Wifi Teathering and USB teathering not working and same problem with wifi connectivity. Keed posted if you find something better.. I shall too...
Click to expand...
Click to collapse
I'm on lineageOs 14.1 which is alright though the wifi issue is still there. However, someone may have found a solution, but I don't know how to implement it. Check posts 207, 210 and 215 in this thread: https://forum.xda-developers.com/g-...eageos-14-1-v400-lg-g-pad-7-0-t3583952/page22
nicospanas said:
I'm on lineageOs 14.1 which is alright though the wifi issue is still there. However, someone may have found a solution, but I don't know how to implement it. Check posts 207, 210 and 215 in this thread: https://forum.xda-developers.com/g-...eageos-14-1-v400-lg-g-pad-7-0-t3583952/page22
Click to expand...
Click to collapse
Would you (or anyone who sees this) please tell me is it possible to flash TWRP if I'm on 5.0.2? Or must I downgrade first?
I'm rooted already. TBH stock is pretty solid and if the custom roms have too many bugs I might pass. But I would like to flash Viper4Android and don't think I've ever installed it without a custom recovery. Many thanks in advance.
KLit75 said:
Would you (or anyone who sees this) please tell me is it possible to flash TWRP if I'm on 5.0.2? Or must I downgrade first?
I'm rooted already. TBH stock is pretty solid and if the custom roms have too many bugs I might pass. But I would like to flash Viper4Android and don't think I've ever installed it without a custom recovery. Many thanks in advance.
Click to expand...
Click to collapse
I made the same question more or less, over a year ago here: https://forum.xda-developers.com/android/development/help-installing-cm-t3483074
You cannot flash another rom over lollipop and I've never seen twrp for android 5.0.2 for v410. I am not 100% sure because my question was a bit different, but I assume from the replies, that probably not.
nicospanas said:
I made the same question more or less, over a year ago here: https://forum.xda-developers.com/android/development/help-installing-cm-t3483074
You cannot flash another rom over lollipop and I've never seen twrp for android 5.0.2 for v410. I am not 100% sure because my question was a bit different, but I assume from the replies, that probably not.
Click to expand...
Click to collapse
Thanks. That's more or less what I thought. From what I'm hearing there are some bugs in the roms that no doubt aren't being maintained at this late stage so I think I'll stick with stock (would be nice to have a custom recovery though.)
Not that it matters (a year later) but lots of people root with Kingroot when there isn't another option and there's several ways to remove all the bits left behind and switch it to supersu.
Thanks again!
Well, I have a work around to stop wifi from disconnecting in lineage os. After that I did not know when wifi got disconnected and reconnected.
Just download E-Robot from playstore.
https://play.google.com/store/apps/details?id=com.bartat.android.robot
And set it to settings as per screen shot.
kingzones said:
Well, I have a work around to stop wifi from disconnecting in lineage os. After that I did not know when wifi got disconnected and reconnected.
Just download E-Robot from playstore.
https://play.google.com/store/apps/details?id=com.bartat.android.robot
And set it to settings as per screen shot.
Click to expand...
Click to collapse
It works! Thank you so much! It seems the LOS developers have stopped trying to fix the wifi issue but it is important. The workaround even works at restart, with some delay, but it works!
Just to clarify to newbies like me, where ssid you have to put the name of the network you want to connect. I wonder if one can add more networks, so it can connect to any saved network according to where you are. You think that's possible?
nicospanas said:
It works! Thank you so much! It seems the LOS developers have stopped trying to fix the wifi issue but it is important. The workaround even works at restart, with some delay, but it works!
Just to clarify to newbies like me, where ssid you have to put the name of the network you want to connect. I wonder if one can add more networks, so it can connect to any saved network according to where you are. You think that's possible?
Click to expand...
Click to collapse
That would be great.. I shall try.. if successful, I shall post results.
I have a uk410, the US Cellular variant of the v410. I tried the CM12.1 "stable" release cm-12.1-20151117-SNAPSHOT-YOG7DAO1K5-v410.zip found here (archive.org/download/cmarchive_snapshots), along with Open GApps nano for 5.1 (opengapps.org/?api=5.1), and quickly got the infinite rebooting issue.
I then switched to the Telsa ROM mentioned earlier in this thread (Tesla-v410-5.1.1.High_Voltage.2.2.1-Release-20150902.zip) found at androidfilehost.com/?fid=24052804347807214, again with Open GApps nano for 5.1 (build open_gapps-arm-5.1-nano-20180922.zip), and have been running it with no issues for two days. My wifi is connected, and stays connected (tested two different routers), Play Store and apps have been working fine, and no crashes so far.
I'm using TWRP 3.1 (twrp-3.1.0-0-v410.img).
Thanks for mentioning Tesla, @jason2678 !
So like all of you I was looking for a rom to install on this v410 7" tablet, and it looks like I should just give up or stick with 4.4.2 stock if I want to go through the rooting process.
Basically all the development roms end with the same problems, wifi dropping, hostspot not working, no ir blaster, volume problems, bluetooth errors, and several hundred posts about lolipop memory leaks crippling the tablet because of only 1gb mem.
So, I am asking all of you, is there any real reason to root it, besides going back to stock 4.4.2?
And lastly, is the stock 4.4.2 kdz image that is floating around a test version, and if so is there an actual official kdz image somewhere that isn't a test image?
Thanks...
CrDroid by far in my opinion. Lineage based, 7.1.2.
Also, e/ os has been unofficially released. No Google anything...an entirely new Google list operating system by lineage. It's lightning fast and runs magisk perfectly. It's basically like nothing you've ever seen before and if you look under LG g pad 7.0 on Android file host, go to the second page and click on the last user who goes by the name anonymous and you'll find the ROM there. I had no idea what it was until my g pad boot it up and I saw the e logo. I pretty much **** myself in excitement