Screen off while making calls after digitizer replacement - LG Optimus G Pro

I replaced my digitizer yesterday since i broke my screen, everything went nicely, the screen responds as it should, but i noticed 1 issue which bugs me. When i make a call the screen goes completely dark(as if i was holding the phone to my ear). I cant press any buttons while making a call so i cant hang up. This happens on any rom(tried going back to 10k stock, bountyman's 4.6.4 and 4.6.1) with the same result. Any help would be greatly appreciated.

I think you got covered proximity sensor.re assemble and see
Sent from my LG-E988 using XDA Free mobile app

Related

Rhodium Touch Screen Unresponsive

Hi All,
I have the CDMA version of the Rhodium and happen to be in Europe right now. After a few calls to Verizon I have been using voice and data successfully for the past few days.
Last night after dinner however, I realized my phone appeared frozen and unresponsive via the touch screen. I powered down the phone using the hangup/power button and powered it back on. Touch screen unresponsive. I Soft-Reset and still same problem. I re-flashed the ROM provided by verizon (Since I couldn't get the send/hangup & power keys to do a hard-reset) and still nothing.
I am fairly certain this was not exposed to any water damage. All keyboard and hard-buttons still remain responsive. Anything I can do to try and resolve this?
BTW: The stickers inside are red--they have been red since probably a week after getting the phone but everything has functioned fine for months -- I blame humidity on the red-sticker part.
Any thoughts here on resolving lack of response from Rhodium Touch Screen?
Thanks in advance.
ardentsilent said:
Hi All,
I have the CDMA version of the Rhodium and happen to be in Europe right now. After a few calls to Verizon I have been using voice and data successfully for the past few days.
Last night after dinner however, I realized my phone appeared frozen and unresponsive via the touch screen. I powered down the phone using the hangup/power button and powered it back on. Touch screen unresponsive. I Soft-Reset and still same problem. I re-flashed the ROM provided by verizon (Since I couldn't get the send/hangup & power keys to do a hard-reset) and still nothing.
I am fairly certain this was not exposed to any water damage. All keyboard and hard-buttons still remain responsive. Anything I can do to try and resolve this?
BTW: The stickers inside are red--they have been red since probably a week after getting the phone but everything has functioned fine for months -- I blame humidity on the red-sticker part.
Any thoughts here on resolving lack of response from Rhodium Touch Screen?
Thanks in advance.
Click to expand...
Click to collapse
Same here .. Did you find anyway to get it working?

[Q] brand new g2 screen issues - lines down screen??

I JUST got my LG G2 from sprint less than 4 hours ago and as soon as i got home i rooted it using ioroot25 that i found somewhere online (if its important i can dig up the link but figure its probably irrelevant) and installed TWRP recovery, made a backup, not a single issue, then all of a sudden half hour later i pick it up and turn it on and the screen is mostly white with yellow lines (that move/respond to touch and whats supposed to be going on on the screen) and it will not show any sort of picture just kinda yellow fuzz lines...it looks just like some phones ive seen with cracked/ faulty LCDs but if i hold the power button and up or down to hard reset it, the LCD starts working again upon boot, and continues to work untill the LCD turns off for the first time after booting and i try to wake the phone again, every time i turn the screen on when its on it goes back to fuzzy lines with no way to make it start working other than restarting the phone with the buttons on the back.
anybody ever seen anything like this before? it cant be a broken or cracked lcd cuz when it first boots it shows a crystal clear screen and everything works fine untill the first time the screen turns off...im guessing i am more than likely going to end up making a trip back out to the sprint store tomorrow for a manufacturer defect replacement? any insight into this strange problem would be greatly appreciated!
Check out this thread
http://forum.xda-developers.com/showthread.php?t=2680948
[KERNEL] Stock KitKat kernels & White Lines issue fix
Sent from my LG-LS980 using Tapatalk
Here's the fix
http://forum.xda-developers.com/showthread.php?t=2727616
Sent from my LG-LS980 using Tapatalk
Faced similar problem with LS980
I am also facing similar problem with LS980.
Only additional mistake i have made is -
I have installed TWRP recovery for D802 instead of LS980(Seller labeled it as D802). After reboot into recovery mode, My lcd showing only lines.
Any suggestion/help ?

Anyway to recover?

My wife's s3 shut itself down a few days ago and now it's stuck in a boot loop. It was on rooted stock 4.1.
It will not fully boot into the system, trying to get into recovery will barely let you see the recovery screen before it cuts off, and getting into download mode will turn off after about 20 sec.
I'd love to be able to savage some things from the device, but I'm lost as to what I could try now.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Sounds like a faulty/stuck power button. A common thing these days. Open the device and play with the switch a little. Ive seen several people say this fixed it temporarily. Doesn't work for everyone though. If it is the button, the only permanent fix is to replace the part. Only a few bucks online and I dont believe its too difficult to do.
Thanks for trying to help. Unfortunately it didn't help me. Took it apart, physical button actuates fine, switch underneath seems to click and return ok. Blew compressed air to be sure nothing's making it stick, button and switch. When I got it back together, except for actually having recovery load up for a few sec (once), it is behaving the same way.
Seeing as I have no soldering experience or equipment and we have already got my wife another device, I may just call it dead.
Thanks again for the help.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Sorry I cant be of better help for that. If you want to do a quick test though, just so you know for sure....
Take out the battery, then put it back in and wait a few moments. If it turns on by itself, its almost definitely a power switch gone bad.

[Q] Weird problem with screen-HTC One X

Hello,
I was looking through the XDA, but haven't found anything similar, so I hope somebody could have an idea what could it be.
First of all, phone is HTC One X-32GB International version.
Few days ago, I noticed that after some idle time, my HOX touch screen becomes unresponsive.At first, I didn't pay too much attention, because everything was fine after restar by power button, but problem continued to repeat.I thought it could be because of the heavy use, so I started to disable app by app but nothing changed.I restarted it several times after that and noticed that if I try side buttons, they show volume is going up and down when I press them.Also a big screen clock is normally working, so my next guess was that maybe a factory reset would solve the problem,but it didn't.
So what i shappenintg?
When I surf the net,or dialling numbers,or whatever else, everything works fine to the moment I stop touching it and leave it idle for a while.After few minutes, screen is unresponsive, doesn't matter if I put screenlock on or of.I can't even answer the call when it rings.Everything looks just as it should look,but is unresponsive.Except side buttons.Then again I have to restart it with long press power button.If I don't touch the screen after phone restarts, after minute or two it goes to unresponsive state again.
I hope somebody has idea what could or what should I do.
Thanks in advance
*update
Sometimes helps if I press power button...
*update 2
Now it's not helping any more if I press power button, seems that power button is not reacting at all sometimes, only if I hold him long enough to restart it.
In fact, now even restart is not helping.
I'm sorry, what ROM do you have? And do you have sweep2wake function on? 'cause I also have had problems with touch, when s2w was on, but I am not sure, what was the ROM that time...
VaskivskyiYe said:
I'm sorry, what ROM do you have? And do you have sweep2wake function on? 'cause I also have had problems with touch, when s2w was on, but I am not sure, what was the ROM that time...
Click to expand...
Click to collapse
It's a stock ROM-And sweep2wake is not on.
Have no idea what else to try.I tried to unlock bootloader,put CWM in because you can control it with buttons, made a backup of everything to USB, format everything, put everything back, but problem is still here.Now I also noticed that it has a delay when push power button for example when I press it screen goes off immidiately,but when I press it again, sometimes it takes 20 seconds just to turn screen on again.And of course, it still not reacting.
Now my last hope is that a ROM became corrupted somehow,so I will try to delete everything, and put some other ROM in.
Since, I am a noob, there will be a lot reading for me .
Everything wiped, unboxed ROM on, and a problem still persists.
Newest discovery:if I twist upper right corner a little bit, everything works fine.
Sent from my HTC One X using XDA Free mobile app
Open up your phone and check the connector for the digitizer is properly connected, even remove it and blow into the connector to make sure there's no dust causing problems.
You can test the screen response before putting the back cover on again, its pretty easy and there are videos on YouTube showing how to remove the back, good luck.
intel007 said:
Open up your phone and check the connector for the digitizer is properly connected, even remove it and blow into the connector to make sure there's no dust causing problems.
You can test the screen response before putting the back cover on again, its pretty easy and there are videos on YouTube showing how to remove the back, good luck.
Click to expand...
Click to collapse
I found some time to open it yesterday evening, and connectors are as they should be.I also tried to remove them, and blow them out, but no use.
Thank you anyway.
I think I will sell it like this for parts.

HTC desire 816 anoying turning off PLEASE HELP!!

Hi i have this supper anoying problem after 5.0.2 update! So basicaly What it does is when ever i will pick up the phone it would turn off like the screen would dim (not rebbot or shut down) and after a little tapping on a screen it would turn on again and sometimes when it does that it would glitch a little. While typing this it happened twice its sooooo anoying idk what to do now if i wont find any solutions i will just buy samsung galaxy or something like that. Also my carrier is Virgin Mobile thanks
Same problem, same phone.
Definitely annoying! Seems random but especially while rotating for me. I have not been able to dig up any solutions thus far.
Check out your proximity sensor settings in the HTC testing app, or try Gravity screen. Mine did the same thing a couple times, also clean off your screen at the very top left, if you look real good you can see the sensor just under the front camera hole in the glass, also sometimes a screen saver will mess with this sensor. One more thing is the stock lock screen can cause an issue similar to what you are talking about, hope one of these help yo out, cane0716
Sent from my 710C using XDA Free mobile app
hi
thanks for information i already gave that phone to my friend and i think he fixed it by actually having different lock screen i currently have samsung galaxy s5 its wayyyy better lol
Phone turns off during use and will not complete boot unless plugged to charger even when the battery is almost full.
This error started last night after I did factory reset because of observed phone lag. I did mistakenly "wiped internal storage" but got the alert of "no OS during reboot", so I restored from my backup from SD.
the phone started properly but went off during initial setup and will go back off each time I tried turning it back on. I thought it was battery so I plugged it to power.
it did boot but will go back off once I have few touches on the screen.
I had to leave it plugged to setup my accounts else it will go off.
I'm using its Wi-Fi to send this message via my PC because any 2 - 3 touches will switch the phone off.
once it does that, it won’t even boot to bootloader before it goes off again unless plugged to power.
what I do to solve this please??

Categories

Resources