[Q] need at&t s3 4.1 debrick image - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

plz any one help me
.i tried 4.3 at&t s3 debrick image by using this thread http://forum.xda-developers.com/showthread.php?t=2660566
.but it didn't help me out

I suggest using our debrick thread here in this same section.
http://forum.xda-developers.com/showthread.php?t=2549068
Not all bricks are fixable, and if you've ever updated to 4.3 or above, older images will not work.
If you need further help please be as detailed as possible about the device and what happened.
Good Luck!
(If you determine you really do need the 4.1.1 debrick.img and can't find it let me know.)
Sent from my SAMSUNG-SGH-I747 using Tapatalk

DocHoliday77 said:
I suggest using our debrick thread here in this same section.
http://forum.xda-developers.com/showthread.php?t=2549068
Not all bricks are fixable, and if you've ever updated to 4.3 or above, older images will not work.
If you need further help please be as detailed as possible about the device and what happened.
Good Luck!
(If you determine you really do need the 4.1.1 debrick.img and can't find it let me know.)
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
i detailed what i did to my at&t Samsung galaxy s3 i747
.my at&t s3 i747 running 4.1.1
.i tried to put 4.3 through Odin(its almost done the work)
.but after finishing work my phone gets automatically rebooted(while android updating)
.and failed by turned off(total dead)
that's what happened.i tried lot of debrick images from 4.1.1 -4.3 of at&t s3 i747
.........but when i used connecting my phone to charger without battery,the red LED blinked

So Odin said PASS and it rebooted? That part is normal. And are you saying that after it rebooted, it said Android is Updating and then it just died?
If i am reading that correctly, I don't know that this debrick method will work for you. It leads me to suspect that there is a deeper hardware problem, possibly with the memory I'm guessing.
It's still worth a try though. From what you described, you are going to need the 4.3 debrick.img though. The 4.1.1 image won't work after flashing 4.3.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

DocHoliday77 said:
So Odin said PASS and it rebooted? That part is normal. And are you saying that after it rebooted, it said Android is Updating and then it just died?
If i am reading that correctly, I don't know that this debrick method will work for you. It leads me to suspect that there is a deeper hardware problem, possibly with the memory I'm guessing.
It's still worth a try though. From what you described, you are going to need the 4.3 debrick.img though. The 4.1.1 image won't work after flashing 4.3.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
dude its working(from your thread)
.but it didn't work without debrick SD card
.i need help.....And i want my phone to run 4.4.2(on at&t s3 i747).....
And thanks dude your threads are awesome..:good:

harijohn said:
dude its working(from your thread)
.but it didn't work without debrick SD card
.i need help.....And i want my phone to run 4.4.2(on at&t s3 i747).....
And thanks dude your threads are awesome..:good:
Click to expand...
Click to collapse
Ok. So you are able to boot download mode, correct? Let's get it booting on its own for now, we can worry about updating after.
Download the MJB 4.3 firmware from here:
http://forum.xda-developers.com/showthread.php?t=2722660
Extract the .tar.md5 file
Remove the sdcard
Flash the MJB firmware in Odin
Reboot.
If it hangs during boot up, reboot into recovery and factory reset. (This will wipe internal sd unless you flash a custom recovery first).
At this point you should be back up and running normally. Let me know how it goes and Good Luck!
Sent from my SAMSUNG-SGH-I747 using Tapatalk

DocHoliday77 said:
Ok. So you are able to boot download mode, correct? Let's get it booting on its own for now, we can worry about updating after.
Download the MJB 4.3 firmware from here:
http://forum.xda-developers.com/showthread.php?t=2722660
Extract the .tar.md5 file
Remove the sdcard
Flash the MJB firmware in Odin
Reboot.
If it hangs during boot up, reboot into recovery and factory reset. (This will wipe internal sd unless you flash a custom recovery first).
At this point you should be back up and running normally. Let me know how it goes and Good Luck!
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
------------------------------------------
dude i put stock s3 4.3 bootloader.
and its working fine without the debrick image SDcard...
what should i have to do after that to get a 4.4.2?

That's awesome news! Glad to hear it's fixed!
You have a couple of options to update from here. If you are with AT&T, got to Software Update in the About Device menu. Might take a day for the ota to become available.
Alternatively, enewman17 has two threads in the General section for updating from MJB to NE4. One will fully update everything to 4.4.2. The other will only update your base firmware, leaving your rom, kernel and recovery as is.
I recommend reading both OP'S and the last few pages of each thread. Then pick which one you want to use.
If you have rooted or flashed anything since debricking your phone, I highly recommend using the one that only updates the base firmware.
If you are still 100% pure stock, either one should work fine. (I do still prefer the base firmware update personally, but either should work ok.)
If you have any questions about them, feel free to ask. And congrats on fixing your device!
Sent from my SAMSUNG-SGH-I747 using Tapatalk

DocHoliday77 said:
That's awesome news! Glad to hear it's fixed!
You have a couple of options to update from here. If you are with AT&T, got to Software Update in the About Device menu. Might take a day for the ota to become available.
Alternatively, enewman17 has two threads in the General section for updating from MJB to NE4. One will fully update everything to 4.4.2. The other will only update your base firmware, leaving your rom, kernel and recovery as is.
I recommend reading both OP'S and the last few pages of each thread. Then pick which one you want to use.
If you have rooted or flashed anything since debricking your phone, I highly recommend using the one that only updates the base firmware.
If you are still 100% pure stock, either one should work fine. (I do still prefer the base firmware update personally, but either should work ok.)
If you have any questions about them, feel free to ask. And congrats on fixing your device!
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
==============================================
dude thanks i had updated my phone to 4.4.2
:good::good::good::good:
if any updates to 4.4.4 please let me know dude
*************************************************************
and once again thanks bud
:laugh:

Related

[Q] Unable to flash Stock ROM

I bought a T-Mobile Galaxy S 3 LTE with model number SGH-T999L. I used Odin V3 1.85 to flash TWRP recovery and CyanogenMod 10.0.0.
Everything went well but my camera doesn't work. On launching the camera, I get a "Can't connect to camera" error and it quits. The same behavior is observed when using other camera apps. I tried the instructions in this thread(http://forum.xda-developers.com/showthread.php?t=2239414) but it did not fix my problem. I now want to go back to my stock ROM. I successfully downloaded and flashed stock recovery using Odin. However, Odin fails when I try to flash the stock ROM obtained from the samsung website. It gives me a "write failed" error and stops. Any tips or suggestions to help me out would be appreciated. Thanks
Is it supposed to use T999 firmware?
Only odin flash T999L firmware. I dont see it released yet at samsing-updates.com though.
Maybe samfirmware.com? I can look later.
Sent from my SGH-T999 using xda premium
re: sure fix
newidforu said:
I bought a T-Mobile Galaxy S 3 LTE with model number SGH-T999L. I used Odin V3 1.85 to flash TWRP recovery and CyanogenMod 10.0.0.
Everything went well but my camera doesn't work. On launching the camera, I get a "Can't connect to camera" error and it quits. The same behavior is observed when using other camera apps. I tried the instructions in this thread(http://forum.xda-developers.com/showthread.php?t=2239414) but it did not fix my problem. I now want to go back to my stock ROM. I successfully downloaded and flashed stock recovery using Odin. However, Odin fails when I try to flash the stock ROM obtained from the samsung website. It gives me a "write failed" error and stops. Any tips or suggestions to help me out would be appreciated. Thanks
Click to expand...
Click to collapse
Why not reflash the stock ODIN flash rom and make sure it all works ok for you, that will tell you exactly what the problem is.
If the stock rom is working properly, then there is only one thing left which is the culprit and that is the CM10/AOKP/AOSP
or PORTED roms which many people seem to like flashing.
The CM10/AOKP/AOSP and ported roms are excellent if you are a developer or if you like to do a lot of experimentation with your phone.
So the thing to do now is reboot your phone to recovery mode, do a "Factory Reset", "Wipe Cache", "Wipe System" and "Wipe Dalvik".
When that's done Open Odin and put the stock rooted T999 Tmobile Jellybean 4.1.2 into Odin's PDA slot, go into download mode
and once you see Odin is connected to the phone start the flash. Have patience for the phone to boot after its done flashing.
Here is the stock rooted Odin flash T999 Tmobile Jellybean 4.1.2 rom that you can download if you like: T999_UVDMD5
Official JB Firmware - Latest JB 4.1.2 Firmware
My suggestion to you is to only flash Samsung T999 Tmobile stock based Jellybean 4.1.1 or 4.1.2 roms in the future.
But who am I to say whats best..... This is just my personal opinion...... Which usually is not worth a dime. LOL
Sorry, but untill we know more about it, I would not flash T999 firmware onto the T999L.
Its only been out a day and tgey are different model phones with different hardware.
If you decide to try anyway, please post your results
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Sorry, but untill we know more about it, I would not flash T999 firmware onto the T999L.
Its only been out a day and tgey are different model phones with different hardware.
If you decide to try anyway, please post your results
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I am a newbie. I thought the T999 was the same as the T999L. That would explain why Odin doesnt flash stock T999 onto my device. Can anyone here post a link to the stock SGH-T999L ROM?
Just did a quick check and I dont see that the firmware has been made available for download yet.
If you want stock I would flash one of the stock based custom roms via recovery for now.
Out of curiosity, what is your current baseband version?
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Just did a quick check and I dont see that the firmware has been made available for download yet.
If you want stock I would flash one of the stock based custom roms via recovery for now.
Out of curiosity, what is your current baseband version?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Baseband version is T999LUVAMB7. Still waiting for stock ROM to be released on samsung-updates or sammobile.
newidforu said:
Baseband version is T999LUVAMB7. Still waiting for stock ROM to be released on samsung-updates or sammobile.
Click to expand...
Click to collapse
I had the same issue with the same phone. Got it 2 weeks ago haha. Did you happen to make a backup first using CWM Recovery? If so, you can just restore that backup and you'll have your camera functionality back. It's pretty annoying switching back and forth from CM10.1 back to stock just to take pictures but Rom manager makes it pretty quick and effortless.
Actually now that I think of it, they prob wont release the original firmware. Seems like the first build is never available, only when an update is released do we get firmware we csn download.
I am working with another member on getting something going for the T999L, but right now we are stuck until a verified safe method of rooting is found. (Dont want to flash a recovery or cf autoroot w/o knowing it wont screw something up)
Itll happen, but we just gotta be patient.
Just reread the op and see that you say you flashed TWRP. So you were able to initially gain root without any problems?
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Actually now that I think of it, they prob wont release the original firmware. Seems like the first build is never available, only when an update is released do we get firmware we csn download.
I am working with another member on getting something going for the T999L, but right now we are stuck until a verified safe method of rooting is found. (Dont want to flash a recovery or cf autoroot w/o knowing it wont screw something up)
Itll happen, but we just gotta be patient.
Just reread the op and see that you say you flashed TWRP. So you were able to initially gain root without any problems?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I used Odin to flash Clockwork Mod recovery first. I did not like Clockwork Mod's interface and reflashed with TWRP. I had no problems to gain root with either of these methods. I also tried Cyanogenmod stable 10.0.0 and then 10.1 RC2 without any problems. As far as I can tell, all apps work except for the camera. One word of caution though. As you can see from my posts, I am new and dont know what I am doing. I might have just gotten lucky since my device is still unbricked. I had only one "scary" moment during the entire process. I used TWRP to wipe my phone clean and was stuck with no OS install file. ADB sideload did not work since it could not recognize the device at that point. Luckily, I had a micro SD card lying around and was able to put in a new OS install file using my laptop and then TWRP was able to handle it.
tsticge aye
faytx1 said:
I had the same issue with the same phone. Got it 2 weeks ago haha. Did you happen to make a backup first using CWM Recovery? If so, you can just restore that backup and you'll have your camera functionality back. It's pretty annoying switching back and forth from CM10.1 back to stock just to take pictures but Rom manager makes it pretty quick and effortless.
Click to expand...
Click to collapse
Wish I had made a backup! Could you zip up the files contained inside "/system/cameradata/" folder and post a link here? It would help me and anyone else with the same problem restore the camera's functionality. In case you want to try it out, follow the instructions in this link but using the files from your stock backup
http://forum.xda-developers.com/showthread.php?t=2239414
newidforu said:
Wish I had made a backup! Could you zip up the files contained inside "/system/cameradata/" folder and post a link here? It would help me and anyone else with the same problem restore the camera's functionality. In case you want to try it out, follow the instructions in this link but using the files from your stock backup
http://forum.xda-developers.com/showthread.php?t=2239414
Click to expand...
Click to collapse
Here is the cameradata folder from the T999L.
http://d-h.st/Ciy
Good Luck!
How did you get Cyanogenmod installed on the t999l every time i try it aborts with status 7
Mine was failing with this same error. I reverted back to stock, re rooted, then downloaded the flash directly to the phones internal storage. Worked like a champ. I think in my case, there is an issue with the SD card, its kind of old.
Sent from my SGH-T999 using xda app-developers app
Beefstew said:
Mine was failing with this same error. I reverted back to stock, re rooted, then downloaded the flash directly to the phones internal storage. Worked like a champ. I think in my case, there is an issue with the SD card, its kind of old.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
You reverted to stock on the T999L? please exspain how that was done
Re flashed stock ROM using Odin. I believe I got the file from Samsung's website, but I'm not positive of that. I do know its huge, over 1 gig. If you need help with the re flash I know there are already how to's on here about that, so I won't go into it here.
Sent from my SGH-T999 using xda app-developers app
You must be using a T999 as your sig indicates, not a T999L. Am I correct?
Sent from my SGH-T999 using xda premium
Don't I feel like a tool now. Yes Doc, plain old t999 here. Now that I read back through the whole thread here I see that I was being a bit redundant. Now I will return to my closet under the stairs.
Sent from my SGH-T999 using xda app-developers app
No worries! We all do stuff like that from time to time!
Sent from my SGH-T999 using xda premium

How to flash 4.3 or 4.4 roms

I just got this phone and its running liquid smooth 4.2.2. i wanted to flash beanstalk 4.4 but it kept failing the flash. can someone point me in the right direction lol. i have the sgh 1747.
Need more information, carrier specific, model, error message when trying to flash
Sent from my SGH-I747M using Tapatalk
jimchee said:
Need more information, carrier specific, model, error message when trying to flash
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
i have the att version. its the sgh i747 version. after searching i think it won't flash those because i need to update to 4.3. but i don't know how.
pitbullmommy45245 said:
i have the att version. its the sgh i747 version. after searching i think it won't flash those because i need to update to 4.3. but i don't know how.
Click to expand...
Click to collapse
Don't do it if you think you might ever want to be able to use Odin as a recovery option. Once you upgrade to 4.3 on AT&T you're stuck if something bad happens to your phone you're going to have a hard time fixing it.
If yours sure you want to do it then Odin your phone back to an early firmware as soon as it boots it will force you to take an update. It may be 4.1.2 or it may be 4.3? Not sure but you just let the phone update through ota. Or alternately there are files with instructions in threads labeled with names similar to 4.3 OTA official.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Well right now there are some disadvantages, imho, to upgrading to 4.3 stock, once the bootloader is updated you cannot downgrade to any other build at this time, but that is a call for u to make, if you want to ota to 4.3 you have to get on stock 4.1.2 which you do through odin and then ota, not what I would do at this time just to many horror stories for my taste on 4.3 right now
Sent from my SGH-I747M using Tapatalk
theramsey3 said:
Don't do it if you think you might ever want to be able to use Odin as a recovery option. Once you upgrade to 4.3 on AT&T you're stuck if something bad happens to your phone you're going to have a hard time fixing it.
If yours sure you want to do it then Odin your phone back to an early firmware as soon as it boots it will force you to take an update. It may be 4.1.2 or it may be 4.3? Not sure but you just let the phone update through ota. Or alternately there are files with instructions in threads labeled with names similar to 4.3 OTA official.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
jimchee said:
Well right now there are some disadvantages, imho, to upgrading to 4.3 stock, once the bootloader is updated you cannot downgrade to any other build at this time, but that is a call for u to make, if you want to ota to 4.3 you have to get on stock 4.1.2 which you do through odin and then ota, not what I would do at this time just to many horror stories for my taste on 4.3 right now
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
so should i not do it? lol. mine is unlocked too. i'm using it on cincinnati bell. will this erase the unlock?
No once a phone is unlocked it cannot be relocked
Sent from my SGH-I747M using Tapatalk
---------- Post added at 02:02 PM ---------- Previous post was at 02:01 PM ----------
I wouldn't do it if it involves updating the bootloader at this time but that is just my opinion and am not a developer just an advanced tinkerer
Sent from my SGH-I747M using Tapatalk
if i understand your question correctly, you're trying to flash a 4.3/4.4 AOSP-based ROM? but it keeps failing?
i'm sorta having the same problem too, whenever i flash any ROMs based off 4.3/4.4 AOSP, i get constant reboots, about 2-3 an hour.
i am using CWM for recoery, but i don't think i tried BeanStalk 4.4
jimchee said:
No once a phone is unlocked it cannot be relocked
Sent from my SGH-I747M using Tapatalk
---------- Post added at 02:02 PM ---------- Previous post was at 02:01 PM ----------
I wouldn't do it if it involves updating the bootloader at this time but that is just my opinion and am not a developer just an advanced tinkerer
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
i mean is it really hard lol? can someone give me a link to the guide.
pitbullmommy45245 said:
so should i not do it? lol. mine is unlocked too. i'm using it on cincinnati bell. will this erase the unlock?
Click to expand...
Click to collapse
It is all up to you. I have 4.3 and am happy with it. It is very stable and has decent battery life. It isn't without issues though. I have problems with it giving me the weak wifi signal message or that my Internet is too slow (10Mbps DSL? Slower than some but certainly no slouch) when it does this it disconnects and I have to manually tell it to reconnect. The other thing is in my battery stats built in the rom not all of the apps are being logged only things like screen on time, cell standby, wifi, bluetooth, basic phone stuff but none of the apps???
Why I wish I hadn't done it? Because I lost the ability to be able to recover my phone with Odin and the ability to do whatever it is I want to with the bootloaders.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I just want to flash beanstalk 4.4. I depend on wifi. So does WiFi work?
Sent from my SCH-I535 using xda app-developers app
pitbullmommy45245 said:
i mean is it really hard lol? can someone give me a link to the guide.
Click to expand...
Click to collapse
Read the stickys here and in the general section it will have nearly all of the information and tools you need. Then you can get firmware to flash in Odin from http://www.sammobile.com go there register for an account click firmwares in the top bar of the site and search for your phones model number such as mine is SGH-I747 and a Canadian phone or Mexican phone would be SGH-I747M.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
theramsey3 said:
Read the stickys here and in the general section it will have nearly all of the information and tools you need. Then you can get firmware to flash in Odin from http://www.sammobile.com go there register for an account click firmwares in the top bar of the site and search for your phones model number such as mine is SGH-I747 and a Canadian phone or Mexican phone would be SGH-I747M.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
can i root though after i get on 4.3. i was reading and it says don't do it if you want root.
pitbullmommy45245 said:
can i root though after i get on 4.3. i was reading and it says don't do it if you want root.
Click to expand...
Click to collapse
Try these links they might be of some use, I assume you have read the stickys and have a general idea of what you are up against. click below if you're sure you want to do this to your phone.
4.3 ota Rom http://forum.xda-developers.com/showthread.php?t=2387423 Follow the instructions exactly and understand once you do this there is no turning back. You can run different roms but you have to have the 4.3 bootloaders you cannot for any reason EVER download the bootloaders
This will get you root, I had to use method #2 http://forum.xda-developers.com/showthread.php?t=2538991
I take absolutely no responsibility of any bad things that happen if you use the above links. make sure you understand the tasks you are wanting to preform and the risks associated with such, 4.3 has caused MANY HARD BRICKS.
ok i just did this but i think i might of messed up. i did just as the op said and i was at the downgrading part and now my screen is on the samsung screen and just flashing
pitbullmommy45245 said:
ok i just did this but i think i might of messed up. i did just as the op said and i was at the downgrading part and now my screen is on the samsung screen and just flashing
Click to expand...
Click to collapse
Give it a few minutes to try to boot then pull the battery, boot to recovery and do a factory reset. if that doesn't work then flash the odin file again.
When you do get the 4.3 it will take several minutes to boot it will look like its stuck on the boot screen but be patient it will likely boot eventually.
theramsey3 said:
Give it a few minutes to try to boot then pull the battery, boot to recovery and do a factory reset. if that doesn't work then flash the odin file again.
When you do get the 4.3 it will take several minutes to boot it will look like its stuck on the boot screen but be patient it will likely boot eventually.
Click to expand...
Click to collapse
how long does it take? like 10 plus min?
pitbullmommy45245 said:
how long does it take? like 10 plus min?
Click to expand...
Click to collapse
No it shouldnt take ten minutes but 4.3 takes considerably longer than all the roms I have used in the past.
You are still at the stage of flashing 4.1.1 correct? if it didnt boot just reflash it(uncheck the box for auto reboot so you have to pull the battery out after you flash it) then go to recovery and do a factory reset, then reboot the phone, it should boot this time.
You did check to make 100% sure you downloaded the correct 4.1.1 file for the phones model? right?
Don't mean to make anybody sound silly just trying to figure out exactly whay is going on.
theramsey3 said:
No it shouldnt take ten minutes but 4.3 takes considerably longer than all the roms I have used in the past.
You are still at the stage of flashing 4.1.1 correct? if it didnt boot just reflash it(uncheck the box for auto reboot so you have to pull the battery out after you flash it) then go to recovery and do a factory reset, then reboot the phone, it should boot this time.
You did check to make 100% sure you downloaded the correct 4.1.1 file for the phones model? right?
Don't mean to make anybody sound silly just trying to figure out exactly whay is going on.
Click to expand...
Click to collapse
i got passed it. i guess i wasn't patient enough lol. i'm on 4.3 now. now time to try to root and flash beanstalk lol.
pitbullmommy45245 said:
ok i got passed that. i got to the part where you flash 4.3. it was going through the flash then it got to a part where two errors came up in red (i couldn't see what they were it rebooted right after) and then it rebooted but got stuck on the att ball and wouldn't reboot. then i went into recovery and it was all red and blue and the android had a triangle with a red exclimation mark. i just tried to reflash but it keeps doing the same thing. it gets stuck on the att ball.
Click to expand...
Click to collapse
Do you still have custom recovery (Which one do you have) or do you have the stock recovery?
Edit: I see you edited your post after I quoted you to respond, glad you got it going, now just follow the guides as written for root, I had to use method #2, but you should try method 1 first.
Good luck

[Q] Galaxy S3 downgrade from android 4.3 to 4.1.2

I have a T-Mobile Samsung Galaxy S3 (SGH-T999) and I made the mistake of allowing an upgrade??? to android 4.3 which has been very unstable for me. T-Mobile, Samsung, and Google all say that there are no updates to 4.3 and I can’t downgrade, so basically I’m out of luck.
Can I downgrade 4.3 to 4.1.2 without bricking my phone and hopefully without voiding my warranty? If so, please give me some instructions. I downloaded Odin 3.07 and firmware: root66_TMO_T999UVDMD5.7z. Thanks a million.
I don't think it's possible to downgrade anymore due to Knox. There was a thread talking about it
Maybe you should check it out.
Sent from my C6916
You cannot downgrade without voiding your warranty
Sent from my SGH-T999 using Tapatalk
Dont flash md5root66 after update!
newbee123 said:
I have a T-Mobile Samsung Galaxy S3 (SGH-T999) and I made the mistake of allowing an upgrade??? to android 4.3 which has been very unstable for me. T-Mobile, Samsung, and Google all say that there are no updates to 4.3 and I can’t downgrade, so basically I’m out of luck.
Can I downgrade 4.3 to 4.1.2 without bricking my phone and hopefully without voiding my warranty? If so, please give me some instructions. I downloaded Odin 3.07 and firmware: root66_TMO_T999UVDMD5.7z. Thanks a million.
Click to expand...
Click to collapse
if you flash the root66 of the md5 firmware via odin after you have already upgraded to 4.3 you will HARD BRICK your phone. Taking the 4.3 ota updates your bootloader and flashing anything other than 4.3 in odin will wreck your life.
You need to download the root66mjc firmware here:
http://www.androidfilehost.com/?fid=23212708291682181
And flash it in odin. Then from there install a custom recovery and download a rom of your choosing and the compatible modem. I recommend you download the md5 modem. Then you're gonna wanna boot into recovery and flash the rom and the modem only (kernels are ok of course) JUST NO BOOTLOADERS. I don't even know if you can do that in recovery but trying to mess with the new BL will brick your face I mean phone.
full steps?
so does anyone have any full list of steps and links on where to get the modems and all to downgrade 4.3 with knox down to 4.1.2
pamma83 said:
so does anyone have any full list of steps and links on where to get the modems and all to downgrade 4.3 with knox down to 4.1.2
Click to expand...
Click to collapse
Would you try reading the thread before posting ? Its not that long. You will see your answer provided by 3 different individuals.
Perseus71 said:
Would you try reading the thread before posting ? Its not that long. You will see your answer provided by 3 different individuals.
Click to expand...
Click to collapse
this thread had 4 posts before i posted and only 1 talks about what to do..where are you seeing 3 different people saying what to do and how???
and i asked where to get the modems and all.. do you see anyone saying where to get them??
pamma83 said:
this thread had 4 posts before i posted and only 1 talks about what to do..where are you seeing 3 different people saying what to do and how???
and i asked where to get the modems and all.. do you see anyone saying where to get them??
Click to expand...
Click to collapse
I was referring to the 3 persons who responded to the OP's question similar to yours. @jtl_777's response is pointing to the 4.3 Firmware.
Its more implied in this thread than stated matter of factly. This thread is several months old, and I know your question has been asked countless times in many different threads, much more recently than in this one.
I suggest you read the stickies in each section. Just by doing that you will find all firmware and modems and more. You will also find that the answer is no, you cannot downgrade your full firmware from 4.3. And you never will be able to.
If your having problems I suggest flashing the latest 4.3 build via Odin, then factory resetting. Start over clean with minimal restoring of backups (only the essentials).
Every time an update comes out there are people who have problems. The majority are solved by doing what I just said because most bugs are caused by using old data created by old apps on the new build.
Even if you could downgrade, chances are youd run into even more issues and still have to factory reset.
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
... You will also find that the answer is no, you cannot downgrade your full firmware from 4.3. And you never will be able to.
Click to expand...
Click to collapse
thanks but I read online and some youtube videos showing that people have gone from 4.3 back to 4.1.2, just trying to make the phone the way it was before any updates were done and wondering if anyone knows the proper steps without bricking the phone.
They probably just flashed a rom. It is simply not possible to downgrade the firmware though.
Sent from my SGH-T999 using Tapatalk
so i found this post: http://forum.xda-developers.com/showpost.php?p=48758977&postcount=1412 and i have the same case as Christopher4tw with a stock 4.3 T999UVUEMJC and just want to get back to T999UVDMD5 so its running the 4.1.2 version of android
so do i just download the below file, extract and flash via odin then do a wipe via recovery? If not can you please explain how to go about this so i can have 4.1.2 running on the phone
April 2013 - 4.1.2 JellyBean
Note: This is based off of the stock image TMO T999UVDMD5
Perm Mirror: Download - root66_TMO_T999UVDMD5.7z
You cannot downgrade your firmware.
Flash an older rom with cwm or twrp if you need to be running md5
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
You cannot downgrade your firmware.
Flash an older rom with cwm or twrp if you need to be running md5
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
so can I use this http://forum.xda-developers.com/showthread.php?t=2276645 and flash via cwm or twrp recovery and it will make the phone run 4.1.2 without bricking or having issues with knox or does that have the bootloader issue with it as well?
Yes, that one you can flash.
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Yes, that one you can flash.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
great thanks so much for your help, can I flash the recovery via odin mobile app or is it safer to do it via pc?
Safer via PC.
It is possible via Mobile Odin. But that's one of the partitions I don't want to mess with when Phone is Booted/
If you know how to use Mobile Odin then it should be fine. I agree that its better to use pc odin if youre not familiar with Mobile Odin. However, it actually doesnt flash the recovery while booted. It flashes the flash kernel which is MO's temp recovery. It then boots to this and flashes. (So, perseus is right in that regard. But I personally love Mobile Odin and find it extremely useful and consider it safe unless you are brand new to all of this).
In fact Mobile Odin is another way you can flash 4.1.2. Itll flash the firmware, but only the system, kernel, recovery and modem. (I didnt bring this up previously because I didnt want to confuse, or go too far too fast).
If youre thinking about flashing recovery via MO, though, you can also instead just flash the rom you found. No need to flash the recovery unless you just want to. Put the rom in the update.zip slot and itll flash just fine.
If any of this is confusing, just stick with the original plan for now. The rest will come easy if you dont rush things.
One more thing, while you can usually update stock without wiping, you may find you have to factory reset after downgrading as the old system was not built for using data created on a new version.
Sent from my SGH-T999 using Tapatalk
thanks for all the help.. had to do the wipe since it kept showing the samsung logo but after that it booted just fine.
t999L
I have tried so many times to downgrade to 4.1.2 using odin but I havent be able to. I always get an error message

[Q] GS4 Tmobile Stock firmware file

Hi as always I come for the expert advice to you guys. I have recently UPDATED my Galaxy S4 for Tmobile to CyanogenMod. Frankly I love the speed but it is still in beta version and has a few things I did not like. Few glitches. Anyway:
I want to go back to my stock firmware which was Kit Kat 4.2.2.before I installed Cyanogenmod.
I already downloaded Odin V3 09 and am ready to do this but I still do not have the stock firmware file. I looked for it but I really don't want to screw it up.
Can someone be so kind and insert the link to the download ? And if of course possible STEP BY STEP instructions on HOW TO GO BACK ?
I understand my phone now is rooted and will stay rooted after reinstalling Kit Kat. So I still should be able to get rid of all the bloatware correct ?
Any help greatly appreciated and huge THANKS IN ADVANCE !!!
Download firmware here http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip, there is a thread already on instructions on how to flash.. and just because you rooted doesn't mean your device will stay rooted forever. Once you flash the firmware you will be unrooted but you can root again.. Alternatively you can just flash a debloated stock rom in recovery
Sent from my SGH-M919 using Tapatalk
emeres said:
Hi as always I come for the expert advice to you guys. I have recently UPDATED my Galaxy S4 for Tmobile to CyanogenMod. Frankly I love the speed but it is still in beta version and has a few things I did not like. Few glitches. Anyway:
I want to go back to my stock firmware which was Kit Kat 4.2.2.before I installed Cyanogenmod.
I already downloaded Odin V3 09 and am ready to do this but I still do not have the stock firmware file. I looked for it but I really don't want to screw it up.
Can someone be so kind and insert the link to the download ? And if of course possible STEP BY STEP instructions on HOW TO GO BACK ?
I understand my phone now is rooted and will stay rooted after reinstalling Kit Kat. So I still should be able to get rid of all the bloatware correct ?
Any help greatly appreciated and huge THANKS IN ADVANCE !!!
Click to expand...
Click to collapse
Finding the stock firmware won't be easy unless you try downloading from sammoble, but you could try Fenny's stock rooted 4.4.2 rom in development.
It's very smooth without the bloatware and it has unlimited tethering.
It works best with Philz recovery.
Just follow the directions and your good to go.
Don't forget to do a factory reset.
Pp.
Sent from my Touchwiz device that never forgets apps.
PIN lock screen does NOT work on Fenny's rom when you first boot/restart/power up the phone. So, if you are turning your phone on the lock screen will just be skipped over.
Pin lock issue could be NG if you need that type of security.
Pp.
Sent from my Touchwiz device that never forgets apps.
serio22 said:
Download firmware here http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip, there is a thread already on instructions on how to flash.. and just because you rooted doesn't mean your device will stay rooted forever. Once you flash the firmware you will be unrooted but you can root again.. Alternatively you can just flash a debloated stock rom in recovery
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Thank you so much Serio22, I just want to make sure it is the correct one for my Tmobile GS4.
And also would you be so kind and attach the STEP BY STEP instructions for Odin ? I am really afraid of bricking my phone. I need guidance.
People say once you do it few times it becomes easy as pie. But like I wrote above I don't want to mess up my phone.
emeres said:
Thank you so much Serio22, I just want to make sure it is the correct one for my Tmobile GS4.
And also would you be so kind and attach the STEP BY STEP instructions for Odin ? I am really afraid of bricking my phone. I need guidance.
People say once you do it few times it becomes easy as pie. But like I wrote above I don't want to mess up my phone.
Click to expand...
Click to collapse
There's instructions here, is for MDL but it's the exact same way for NB4 http://forum.xda-developers.com/showthread.php?t=2258628
Sent from my SGH-M919 using Tapatalk
serio22 said:
There's instructions here, is for MDL but it's the exact same way for NB4 http://forum.xda-developers.com/showthread.php?t=2258628
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
One last question and I won't bother again:
When it comes to those files " OFFICIAL TAR AND ORIGINAL TAR " do I just choose any one of them ?? I wanted to know the difference between them both. Instructions don't really specify which to choose. Or is it both ?
And also there is a suggestion to " Wipe the data in recovery " after the whole thing how do I do that ? Should I do that ?
Thank you again for your help.
emeres said:
One last question and I won't bother again:
When it comes to those files " OFFICIAL TAR AND ORIGINAL TAR " do I just choose any one of them ?? I wanted to know the difference between them both. Instructions don't really specify which to choose. Or is it both ?
And also there is a suggestion to " Wipe the data in recovery " after the whole thing how do I do that ? Should I do that ?
Thank you again for your help.
Click to expand...
Click to collapse
You don't have to worry about that, just use the tar file I posted earlier
Edit: and for the wipe data, you reboot to recovery after you flashed the firmware and do a factory reset.. Yes you should, but not necessary if you don't have any issues..
Sent from my SGH-M919 using Tapatalk
Thank you so much again, you were more than helpful :laugh:
serio22 said:
You don't have to worry about that, just use the tar file I posted earlier
Edit: and for the wipe data, you reboot to recovery after you flashed the firmware and do a factory reset.. Yes you should, but not necessary if you don't have any issues..
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Sorry one more thing:
In the instructions Auto Reboot is checked. I have watched a few videos with the F. Reset Time also checked, should I check both in Odin ?
emeres said:
Sorry one more thing:
In the instructions Auto Reboot is checked. I have watched a few videos with the F. Reset Time also checked, should I check both in Odin ?
Click to expand...
Click to collapse
I don't think any of them are necessary, but you can check both of them if you want.. I always have F.Reset checked and reboot disabled because I like to reboot on my own but that's just me
Sent from my SGH-M919 using Tapatalk
serio22 said:
You don't have to worry about that, just use the tar file I posted earlier
Edit: and for the wipe data, you reboot to recovery after you flashed the firmware and do a factory reset.. Yes you should, but not necessary if you don't have any issues..
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
So I am back to stock it took me back to KitKat and now I am unrooted. I did not do the factory reset with Cyanogen so when I flashed the stock ROM I still had the cyanogen wallpaper. Some apps did not work so I did the factory reset and everything is flawless now.
Thank you for your help and the file you have provided. By the way was that the Jellybean of KitKat stock firmware ?
emeres said:
So I am back to stock it took me back to KitKat and now I am unrooted. I did not do the factory reset with Cyanogen so when I flashed the stock ROM I still had the cyanogen wallpaper. Some apps did not work so I did the factory reset and everything is flawless now.
Thank you for your help and the file you have provided. By the way was that the Jellybean of KitKat stock firmware ?
Click to expand...
Click to collapse
KitKat
Sent from my SGH-M919 using Tapatalk

[Q] T999v - TWRP (2.7.1.0 or older) “NO OS Found”

Hi All,
I have S3 T999v – Wind variant running on stock 4.4.2 , overall I hate this kitkat experience...
My issue is whenever I try to flash custom recovery TWRP (2.7.1.0 or older), it installs but when I try to take backup it shows nothing to take backup of (no System , no EFS etc....). When I try rebooting it gives error “NO OS Found” I am able to proceed anyways and it starts up phone fine.
Can anyone tell me what could be the issue here??? I wanna downgarde to either stock 4.3 or to install custom liquid smooth 4.4.4. but would prefer to take a back up just in case.
BTW my phone is rooted , rooted it with towel root.
Also can I flash T999 (t-mobile) based recoveries onto my T999v ?
Would appreciate your help :good:.
Thanks
I recommend using d2tmo recoveries over d2can. More roms will be flashable. And you can use any rom here in our forums.
For now, try using either cwm or philz recovery. Youre experiencing a known issue that I believe is related to the hardware revision. I keep hoping to attempt a fix, but just havent had time yet. But for now, one of the other recoveries should work for you.
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
I recommend using d2tmo recoveries over d2can. More roms will be flashable. And you can use any rom here in our forums.
For now, try using either cwm or philz recovery. Youre experiencing a known issue that I believe is related to the hardware revision. I keep hoping to attempt a fix, but just havent had time yet. But for now, one of the other recoveries should work for you.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Thanks Doc,
I will give it a try, but if there is a way to downgardde to 4.3 stock? Tried odin it with sam mobile firmware, its crashing
sam33r said:
but if there is a way to downgardde to 4.3 stock? Tried odin it with sam mobile firmware, its crashing
Click to expand...
Click to collapse
No, you cannot downgrade firmware. Just try what doc said
serio22 said:
No, you cannot downgrade firmware. Just try what doc said
Click to expand...
Click to collapse
Thanks buddy, yup CWM worked :good:
but why cant we downgrade to 4.3, i though it was that one cannot downgrade lower than 4.3 i.e. 4.2. in not possible now!
Knox. They prevent any downgrading to protect against tampering with Knox secure containers. You can't downgrade anymore, period. Anything beyond 4.3 or with Knox will be this way from now on.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
Yeah just like doc said, if you're on 4.3 firmware you can't downgrade firmware to 4.1.2, or if you're on 4.4.2 you can't downgrade to 4.3 or 4.1.2.. Anything lower than your current firmware is a no.. You can only flash equal or newer firmware

Categories

Resources