[Q&A] [ROM][DEV][OFFICIAL] CyanogenMod 11.0 - androidarmv6 [COOPERVE][Nightly Builds]
Q&A for [ROM][DEV][OFFICIAL] CyanogenMod 11.0 - androidarmv6 [COOPERVE][Nightly Builds]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Hi devs.
I installed CM11 20141011 via flash update on my S5830M. I had installed RC10, 20140927 nightly and RC11 before the update. But with the new nightly, after the background blackout (and then the lockscreen), the Quick Settings button in Notification Panel doesn't appear. This happened with the 20141006 nightly too. But before that build, it worked fine.
Btw, flashing another Galaxy Y baseband fixed the 3G for me.
Thanks for reading.
PLZ help me, i tired try flash last version Nightly & stable, Even when enabled toggle signature verification it failed
kingspeed said:
PLZ help me, i tired try flash last version Nightly & stable, Even when enabled toggle signature verification it failed
Click to expand...
Click to collapse
First, follow the unbricking procedure (flashing full stock ROM: CSC + PHONE + MODEM + bootloader).
Then, if your phone is back to life, turn it off. Then enter into Download Mode (Vol -, Vol + and Power) and flash Boot.tar.md5 (PDA) via Odin. Boot into that recovery (Vol +, Power and Home), flash the MTD CWM (6.0.5.3, DON'T USE 6.0.1.2 as it breaks the installing process) and reboot into the new recovery.
After rebooting into recovery: wipe data, cache partition and format /system. Now you can install the RC11 or latest nightly there. Then reboot your phone.
(NOTE: remove the SIM card if a black screen shows after two seconds of booting)
Hope this helps.
Can someone guide me how to use s2e with this Rom?
Sent from my GT-S5830i using Tapatalk 2
CM11.0 for 5839i
Hi,
I was trying to instal CM11 on my ace GT-S5839i and it appears the ROM is only for GT-S5830i. The installation stops with status 7. I hope someone could help me understand if it's my fault or if is a known problem.
Thank you
*edit: I figured out how to install the ROM. Now I don't know what gapps do I need to install. I've tried a few but none of them work properly. Play Store doesn't appear.
WiFi was not working to fix it?
When I flash the rom and reboot the device, the boot animation just glitches and then the screen goes all black. Is this supposed to happen, or is just me? If the later, how can I fix it? Thanks in advance.
can someone please make this smemo app work with s5830i cm11
Hi
This is a link to a thread where u can get a flashable zip for the smemo samsung app that works on any android device without touchwiz. Its supposed to work on cm11.
http://forum.xda-developers.com/showthread.php?t=2668451
I tried installing it from sdcard from cwm 6.0.5.3 of my s5830i but i got an error about it being unsecure package and confirmed to still install but then i got a status 0 error and it is not installed. Im running cm11 nightly 22 november 2014.
Please help. I love the smemo app and love cm11 too. Just wish i could get it onto cm 11.
Thanks...
Just Installed thread: ] CyanogenMod 11.0 - androidarmv6 [COOPERVE][Nightly Builds] s5830i
I am facing weird problem
1. After installation completes the CyanogenMod logo animation runs and stops
2.After forcibly restart it then goes by animation and and something distorted comes in, text in white and 3 arrows downward in blue color and gets stuck there, nothing else happens, tried to reflash, restart, cashe data dalvik wipe dozens of times
any help would be appreciated
Solved
Ok Sloved the issue, I pulled the sim off of the phone and now it's it's up and runnig.
Thanks. will post later after testing
hello i can boot cm11 on my phone galaxy ace s5830i with cwm
Stuck on status 7
What can i do i have flashing the original stock rom via odin But what Can i do i'm used cm 5 because cm6 worked not too And always the same error status 7
Coraiser said:
What can i do i have flashing the original stock rom via odin But what Can i do i'm used cm 5 because cm6 worked not too And always the same error status 7
Click to expand...
Click to collapse
Bro go here- http://forum.xda-developers.com/showthread.php?p=54499159
Re: PHONE not booting after Installation
illeach1 said:
Just Installed thread: ] CyanogenMod 11.0 - androidarmv6 [COOPERVE][Nightly Builds] s5830i
I am facing weird problem
1. After installation completes the CyanogenMod logo animation runs and stops
2.After forcibly restart it then goes by animation and and something distorted comes in, text in white and 3 arrows downward in blue color and gets stuck there, nothing else happens, tried to reflash, restart, cashe data dalvik wipe dozens of times
any help would be appreciated
Click to expand...
Click to collapse
REMOVE SIM card and TRY AGAIN.
did it solved problem?
ROM having problems booting with SIM , Hope it will resolved soon !
[SOLUTION] Fix for Error Status 7 and flashing CWM 6.0.5.3 on s5830i
Hi
for all those who are facing ERROR STATUS 7 or anything which caused by lack of CWM 6.0.5.3
This is TESTED on SAMSUNG GALAXY ACE i S5830i and worked 100%
All files are uploaded here for easy access and download from single post.
Make Sure You Do NOT have SIM CARD INSERTED , other wise ROM will not Boot
Downloads : (available at the END of POST for Direct Download)
file 1 - Odin_with_pit.zip location C
file 2 - ODIN flashable CWM 6.0.5.0 boot.tar.zip location C
file 3- CWM 6.0.5.3 upgradable cwmMTD5830i.zip location : SD CARD
INSTRUCTIONS:
STEP 1 :
Put your s5830i in Download Mode by pressing Volume UP + Volume Down + Power key at a time
Warning screen will appear
STEP 2 :
press Volume UP button to Continue
Now you are in Download Mode
STEP 3 :
Extract Odin_with_pit.zip (downloaded from end of the post) ,
RIGHT CLICK Odin_with_pit.exe Run As Administraor
Untick Protect My Computer and Data from Unauthorised program Activity
STEP 4 :
Now Connect Your Phone with USB cable , ODIN will Recognize your phone as COM xx
STEP 5 :
Extract boot.tar.zip from the post and you will get boot.tar.md5 file
Click on PDA >> select the file boot.tar.md5 downloaded from this post
STEP 6 :
Make Sure RESET TIME and AUTO REBOOT checked , click START !
wait for seconds and you will see the PASS ! message , you will be reboot to CWM 6.0.5.0
STEP 7 :
In CWM 6.0.5.0 goto Install ZIp > from SD CARD > select cwmMTD5830i.zip from SD CARD
You will see INSTALLATION COMPLETED MESSAGE
STEP 8 :
go to Advance > Reboot Recovery
if you promoted by message that Do you want to root this device? Select YES and Continue
STEP 9 :
Voila !!! You are having CWM 6.0.5.3 on s5830i fully compatible with KITKAT ROMS
STEP 10 :
Wipe Data/Cache/Dalvik + Format /system
Install CM 11 zip from SD Card !! :good:
CONGRATS you are now having CM11 on s5830i !
Make Sure You DON'T HAVE SIM INSERTED as this ROM having Bug and cant Boot with Simcard
If you encountered any error let me know ..
Press THANX if i helped you
Coraiser said:
What can i do i have flashing the original stock rom via odin But what Can i do i'm used cm 5 because cm6 worked not too And always the same error status 7
Click to expand...
Click to collapse
Solution for this error is provided here STEP by STEP with all files attached here http://forum.xda-developers.com/showpost.php?p=57964725&postcount=16
RahulTech said:
REMOVE SIM card and TRY AGAIN.
did it solved problem?
ROM having problems booting with SIM , Hope it will resolved soon !
Click to expand...
Click to collapse
Flash another modem. It will fix the problem with sim
astarothdoom said:
Flash another modem. It will fix the problem with sim
Click to expand...
Click to collapse
I have tried flashing official s5830i MODEM via odin but not worked
Can you suggest which modem to flash to make SIM card working ?
And link if possible
TX in advance
It works I've Flashed boot.tar.md5
But cm11 is too buggy for me i stay on stock rom.its better
Sent from my OMNIA7 using Tapatalk
Related
Hi I got a solution to endless bootloops (at least working for me ) every time I flash new ROM I got stuck with bootloops so I experimented little bit and this solution seems to be working ...
I am using CM10 with Semaphore JB
You will need fixrecovery.tar and Odin (I used v1.83) you can download them in attachments.
For those who don't have flashable kernel on Internal SDCard can skip step 5 and second half of step 3.
1. So first of all you have to remove SIM and SDCard.
2. Flash fixrecovery.tar with Odin and uncheck Auto Reboot
3. Get into recovery and wipe only cache and flash kernel you want
4. Flash normal kernel with Odin and again uncheck Auto Reboot
5. Get into recovery and again flash kernel of your choice
6. Now you should be ready to switch your phone on
Maybe this excessive flashing of kernel is not necessary but I did it this way
Did you make this fix by yourself? There is already a fix for bootloop from stratosk!
Yes I did... can you post stratosk's fix please ?
Syntaxer said:
Yes I did... can you post stratosk's fix please ?
Click to expand...
Click to collapse
sorry, my mistake, it's probably made by someone else. Search the thread.
Anyway, thanks for the fix...
No problem I hope someone will find this fix useful
Syntaxer said:
Yes I did... can you post stratosk's fix please ?
Click to expand...
Click to collapse
sure you did ... [Q] Cannot boot or enter recovery (CM9 20120425)
Didn't see that post earlier, but it's not working for me anyway ... I had to clear cache additionally
Thats big development time... Clear cache ftw!
Sent from my XT910 using xda premium
Hello there,
Thanks for the guide. This hasn't worked for me?
I was upgrading versions of aways ROM (from ICS to Jellybean) and once I had flashed the ROM and GAPPS the phone rebooted. The link for the GAPPS was broken on the ROM website but it found me a replacement that I used. The phone does boot but FC on setup and no longer boots into recovery and is stuck in bootloop.
I thought this would fix the issue as I could still enter download mode but I still have the same problem? Phone won't boot into recovery and just loops...
Any thoughts?
Thanks in advance : )
I have a device that is experiencing bootloop just stop at the logo, I think this is the kind of Mtk, rooted, Kitkat. I do not know exactly what causes it bootloop, Before bootloop I edit files and install Tweaks build.prop through the application My pimp and when I restart the device bootloop ensued, do you think this is file damage build.prop or else. So that my device bootloop
After CM 11 installation and now i cant go back to CM 10.2. When i try to install zip from sd card it says that sd card is not mounted. When i try to mount SD card via CWM it says "error mounting SD card"
This happens with CWM-based recovery 6.0.2.5
With CWM-based recovery 6.0.4.5 every version of CM 10.2 comes with some strange error.
Whats the problem?
And yeah. Sorry for my awful english.
Try with flashing temporary recovery from built-in cwm recovery
and over temporary cwm flash cm 10.2
Rox said:
Try with flashing temporary recovery from built-in cwm recovery
and over temporary cwm flash cm 10.2
Click to expand...
Click to collapse
Tried that. Didn't helped :/
Axwel said:
Tried that. Didn't helped :/
Click to expand...
Click to collapse
Strange error? Deleted assert in updater-script yet?
Sent from my GT-I8160 using Tapatalk
I dont remember it well but i had same problem (i couldnt install any .zip). By trail-and-error method i found that zips from other sdcard worked (weirdly, after that .zips started working on old scdard aswell xD)
Can anyone post step by step what should i do if i want to flash back to CM 10.2 ? Please
Method 1a
1. Dont flash to cm 11 to avoid xD
JK
Method 1b
1. Edit updater-script inside zip by deleting assert lines
2. Download temporqry cwm 6 by shaan
3. Boot to recovery and flash temporary cwm
4. From temporary cwm flash cm 10.2 with edited updater script.
If this is not working try.with this:
Method 2:
1. Move meta-inf folder from cm 11 to cm 10.2 zip but leave cm 10.2 updater script
2. Flasg that modified zip
If not working try deleting assert in updater script in method 2
I hope something will help
Sent from my GT-I8160
Stock Rom
Just flash your stock Jelly Bean Rom via odin, then CM.
Rox said:
Method 1a
1. Dont flash to cm 11 to avoid xD
JK
Method 1b
1. Edit updater-script inside zip by deleting assert lines
2. Download temporqry cwm 6 by shaan
3. Boot to recovery and flash temporary cwm
4. From temporary cwm flash cm 10.2 with edited updater script.
If this is not working try.with this:
Method 2:
1. Move meta-inf folder from cm 11 to cm 10.2 zip but leave cm 10.2 updater script
2. Flasg that modified zip
If not working try deleting assert in updater script in method 2
I hope something will help
Sent from my GT-I8160
Click to expand...
Click to collapse
You are awesome! Thanks. Gonna try that tomorrow. And will let you know if that helps
EDIT: BTW does anyone knows why speaker in incoming/outgoing calls doesnt work as it should? When i press speaker button the sound switches to speaker but its so low its like w/o speaker. And the only way to hear someone talking with speaker turned on is to keep phone close to your ear. That only occurs in incoming/outgoing calls, music/sounds etc etc. works perfectly.
teogepe said:
Just flash your stock Jelly Bean Rom via odin, then CM.
Click to expand...
Click to collapse
Axwel said:
Can anyone post step by step what should i do if i want to flash back to CM 10.2 ? Please
Click to expand...
Click to collapse
I think it's easier, to:
Step by step:
1-Go to CM 11 Recovery
2- Do a full wipe (data, cache,)
3-Reboot and go to download Mode
4- Conect to PC and flash stock JB via Odin
5-after first boot reboot to stock recovery, make full wipe (on stock recovery)
6-Flash Temporaty CWM from SD
7-Full wipe (optional)
8- flash CM
9-flash Gapps
10- Reboot and enjoy!.
teogepe said:
I think it's easier, to:
Step by step:
1-Go to CM 11 Recovery
2- Do a full wipe (data, cache,)
3-Reboot and go to download Mode
4- Conect to PC and flash stock JB via Odin
5-after first boot reboot to stock recovery, make full wipe (on stock recovery)
6-Flash Temporaty CWM from SD
7-Full wipe (optional)
8- flash CM
9-flash Gapps
10- Reboot and enjoy!.
Click to expand...
Click to collapse
takes too much time, and sometimes some people need mobile methods,
i think i asked someone to delete assert and rox said to use temp cwm 6 and he managed to go back to cm102(or 10.1) :/
1 more solution
1. Flash stock kernel using ukf
2. Boot to recovery and flash temporary cwm
3. Flash cm 10.2/1
Sent from my GT-I8160
teddytsen said:
takes too much time, and sometimes some people need mobile methods,
i think i asked someone to delete assert and rox said to use temp cwm 6 and he managed to go back to cm102(or 10.1) :/
Click to expand...
Click to collapse
True, it takes too long, but for me its more safe and fresh flash...
Just trying to help
Download Cm12 Here : https://download.cyanogenmod.org/?device=t0lte
Download gapps Here : https://s.basketbuild.com/gapps
Download Boot Converter e250l https://mega.co.nz/#!hlV2iT7I!ocIK9o37R0vXDh8lRi2YY9amYGrbEPx3WX6zu-gkjwk
Download E250l Modem https://mega.co.nz/#!c19hmZII!-egdPYfx7yhoeZTLOhQd7R8WGHMtgNsa1aHTcuRreHk
Download Super User https://mega.co.nz/#!1gVwHRjI!B8mffxj_hOA9xMGPOalpDrFjeBt9ytdfRs0FMC7A_5k
Copy All above Files in SD card
Boot Into Recovery
Clear Dalvik/Cache
Flash Files in above sequence
Clear Dalvik/Cache
Reboot Now your phone will boot successfully:good:
Now all things will work expect Camera
To enable camera Install terminal emulater and enter following command
su
sh etc/init.d/80cfw
Now you can install Google Camera or any other app which will work perfectly alright!:good:
If keyboard not work install any keyboard from playstore
All issues are resolved i.e WIFI
DEAD41 said:
Download Cm12 Here : https://download.cyanogenmod.org/?device=t0lte
Download gapps Here : https://s.basketbuild.com/gapps
Download Boot Converter e250l https://mega.co.nz/#!hlV2iT7I!ocIK9o37R0vXDh8lRi2YY9amYGrbEPx3WX6zu-gkjwk
Download E250l Modem https://mega.co.nz/#!c19hmZII!-egdPYfx7yhoeZTLOhQd7R8WGHMtgNsa1aHTcuRreHk
Download Super User https://mega.co.nz/#!1gVwHRjI!B8mffxj_hOA9xMGPOalpDrFjeBt9ytdfRs0FMC7A_5k
Copy All above Files in SD card
Boot Into Recovery
Clear Dalvik/Cache
Flash Files in above sequence
Clear Dalvik/Cache
Reboot Now your phone will boot successfully:good:
Now all things will work expect Camera
To enable camera Install terminal emulater and enter following command
su
sh etc/init.d/80cfw
Now you can install Google Camera or any other app which will work perfectly alright!:good:
If keyboard not work install any keyboard from playstore
All issues are resolved i.e WIFI
Click to expand...
Click to collapse
thanks mate.
I have installed the rom and its working great on my device.
BROKEN link
link 3, 4 and 5 is broken...
I'm trying this instruction now. (links worked)
After downloading TWRP from here offcourse.
**UPDATE**
OK, I flashed this because the origal ROM was having wifi connection issues.
After flashing I had the same issues, but after a couple of reboots and enabling and disabling wifi, it started working. After flashing I also had some issues using the keyboard, but after playing with the keyboard/input options that worked too. Camera worked right away so no need to excecute the terminal commands displayed above. I installed all the most used apps again and so far everything works like a charm.
I'll update this post if I run in to trouble again.
**UPDATE**
After running for a couple of days, Wifi issues are back. Wifi can be switched on, but no networks appear.
Rebooting doesn't help and phone reboots by itself very often. Weird that all these issues started after a couple of days.
How to flash cm12 rom
I use TWPR to flash cm12 rom, but cm12 rom is not surport for note 2 korean. it only for note 2 lte? or worng TWRP version? I already flash with TWRP 2.6 and TWRP 2.8 it not working !
not easy find and flash .
How to update new versions of cm12?
Unable to Flash Flash Cm12.1 Giving Media Error Please Some Body Help Me ?
In Recovery Mod when Ever I Install Zip From Sd Card And Chose cm12.1 it gives Error E: etc please help me i also Install TWRp recovery But vain currently i have insatalled 4.4.2 in my samsung Note 2 lte
I follow all of the steps but my phone samsung shv e250l boots back into normal koeran rom
Please advise what i am doing wrong
Phone is rooted and have tried both trwp 2.7.1/2
Sent from my LG-D722 using Tapatalk
Please upload the files again, 3, 4 and 5 link are dead.
3 files on the Mega Web were removed dear! Please upload these files again, thanks you!
I've rooted note 2 shv e250L via odin 3.07 and installed philzmod touch recovery. Now I want to know whether cm12.1 can be flashed over philzmod or I need twrp for that matter?
If I need twrp only for flashing then how to get rid of philzmod touch recovery?
Sent from my SHV-E250L using Tapatalk
HelHe
mubashirsaeed said:
thanks mate.
I have installed the rom and its working great on my device.
Click to expand...
Click to collapse
It has rom and recovery. Am I supposed to flash both?
OMG! I was needed it very much
Thanks! I will use it right away.
Thank you for great customrom!
Files DOWN
Hello,
the files uploaded on Mega are down.
Please reupload them. Thx.
niwo
links are broken
Current firmware: Android 5.0.2, Build LRX22G, Cyanogen OS version 12.0-YNG1TAS0W0
OTA: http://builds.cyngn.com/cyanogen-os...deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
Fastboot flashable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
Boot Debuggable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-boot-debuggable.img
Use OTA for manually update from any official KitKat build; don't use fastboot flashable images on existing devices with KitKat bootloader - it will brick the device!
How to unbrick: http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040 (Credit goes to @tirta.agung)
OTA downloaded.... Now going with flashboot...
Need Some Help
Deleted
anyone flashed it yet???
Sent from my AO5510 using Tapatalk
Flashed it..initial boot will take a long time
blackyz said:
OTA downloaded.... Now going with flashboot...
Click to expand...
Click to collapse
I tried fastboot method now my phone is not booting
anyone done it successfully? my DL is halfway so I need procedural help.
Phone not booting
sharan.nyn said:
I tried fastboot method now my phone is not booting
Click to expand...
Click to collapse
I flashed with fastboot process successful but my phone not booting, nothing happening. i don't know what to do now no logo just dead.
I flashed it with TWRP.
Awsm CM12S.
Super smooth !
mralam92 said:
I flashed with fastboot process successful but my phone not booting, nothing happening. i don't know what to do now no logo just dead.
Click to expand...
Click to collapse
Same here bro!
now following this
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
sharan.nyn said:
Same here bro!
now following this
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Click to expand...
Click to collapse
service centre help or not?
Posted cm12
Just installed the zip version of cm12 on yu. Could not wait for the official ota update. Updated zip using cwm recovery which I had installed while the phone was running on the cm11 kitkat 4.4.4 version.
I understand that since this is just a system update there is no need to change or revert back to the original recovery.
(just a doubt- is it necessary to revert back to original 4.4.4 system stock recovery in case we get the OTA or the OTA will take care of any Custom recovery and will install iteslf?)
Initial boot will take a long time due to the Android Runtime (ART) virtual machine which is the improvisation over the Dalvik Cache. So please be patient for all the 122 apps to get registered in by ART. I had tried the ART while on cm11 4.4.4 (despite of system warning that it might lead to crashes etc... ), even then it took a very long time......
Working absolutely fine. Initial experience is awesome. Will be observing it now for some time. Most other features are similar to the cm11. no more 3g detection errors. Got to explore more....
My first posting in XDA.
I owe a lot to this community from which I have taken a lot. I hope I will be able to give back even little that I have got to help others. :good::good:
By zip version i mean the version that can be installed using the phone recovery with out the need of a computer to push the system (i.e. the flashable version). I am not aware what the debuggable version means.
mralam92 said:
service centre help or not?
Click to expand...
Click to collapse
Service center said they will pickup the device in 7-8 days
please tell me difference between OTA,Fastboot flashable image and Boot Debuggable image.And which one should I download to install.?
Titokhan said:
OTA: http://builds.cyngn.com/cyanogen-os...deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
Fastboot flashable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
Boot Debuggable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-boot-debuggable.img
Click to expand...
Click to collapse
Is the Android version 5.0.x or 5.1?
Has anyone encountered any bugs at all?
To flash through recovery, do I need the OTA version?
CM 12 update
guys plzzz help me as lollipop is out for yu...can i install ?? i have rooted my yu but i m still on stock rom i.e cm 11 and i have cwm ,can i flash the cm12 zip file using cwm ..
dont flash thru fastboot all who flashed it thru are having hard bricked devices
weshall said:
guys plzzz help me as lollipop is out for yu...can i install ?? i have rooted my yu but i m still on stock rom i.e cm 11 and i have cwm ,can i flash the cm12 zip file using cwm ..
Click to expand...
Click to collapse
YES YOU CAN JUST FOLLOW THIS STEPS
1. Download official CM12s Ota(1st zip in the link).
2. Place the downloaded zip file in the ‘download’ folder on phone’s internal storage.
3. Boot Yureka into Stock Cyanogen recovery - To do so, power off the phone. Then press Volume Up + Volume Down and Power button simultaneously,Onec you boot into recovery do data/ factory reset.
4. Select ‘Apply Update’ > ‘choose from internal storage’ > /0 > Download > and select “cm-12.0-YNG1TAS0W0-tomato-signed.zip” file. The ROM will be flashed and you should be seeing the Android Bot
5. Once installation is over, go to main page and ‘wipe cache partition’
6. Then select Reboot system now
That’s it! Wait for a while as the device boots for the first time with all new and fresh Cyanogen OS 12.
IF you dont get anyhting just revert me back ,or pm will help you.:laugh:
Titokhan said:
Current firmware: Android 5.0.2, Build LRX22G, Cyanogen OS version 12.0-YNG1TAS0W0
OTA: http://builds.cyngn.com/cyanogen-os...deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
Fastboot flashable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
Boot Debuggable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-boot-debuggable.img
Use OTA for manually update from any KitKat build; don't use fastboot flashable images on existing devices with KitKat bootloader - it'll brick the device!
Click to expand...
Click to collapse
It just got updated if you flash it on kitkat bootloader, the device will get bricked
Many users have got their device bricked, the warning was too late I flashed it today at 1:50 AM
weshall said:
guys plzzz help me as lollipop is out for yu...can i install ?? i have rooted my yu but i m still on stock rom i.e cm 11 and i have cwm ,can i flash the cm12 zip file using cwm ..
Click to expand...
Click to collapse
Hi, You can very well install the .....signed.zip using the CWM recovery as I did.
1. Install the .....signed.zip file and not the ....flashable.zip or the ....bootable.zip files. Only the .....SIGNED.ZIP file either on your phone memory or sdcard
2. Reboot into the recovery mode either by using the advanced reboot option or by pressing the volumeup+down button and power buttons simultaneously and releasing them once you see the Yu logo and phone vibrates.
2. Use the Factory reset command first and then wipe the Cache
3. Navigate to the Install zip and chose the .....SIGNED.zip from either your phone memory or the SD Card as CWM has the option to chose the zip file. and swipe to install it.
4. After successful installation navigate to reboot and swipe to allow the system to restart.
5. Intial boot takes a very long time saying Android is updating. This is because Lollipop uses Android Runtime (ART) by default and not Dalvik Cache as a virtual machine for all apps. So please be patient till all the 122 or so apks are updated by ART. Takes around 10-15minutes.
6. The usual fist time boot stuff.... and then...
7. Enjoy. CM12 it is sweet.
---------- Post added at 09:58 AM ---------- Previous post was at 09:43 AM ----------
id74em8 said:
Is the Android version 5.0.x or 5.1?
Has anyone encountered any bugs at all?
To flash through recovery, do I need the OTA version?
Click to expand...
Click to collapse
It is android version 5.0.2
To flash through recovery (either CWM or TWRP) use the .....SIGNED.ZIP i.e. the first file in the list and NOT the .flashable.zip or the last one. Only the first one.
I installed the zip through CWM
The only bug I noticed was when you add the Powersaver option tile in the Notification drawer, when in the power saving mode, a notification showing the power save mode got invoked. When I used the same option after rebooting I am not getting it now..
Also all of a sudden a red boundary started to appear at the edges of the screen. So I though I had opted for the screen refresh notification in the Developer options but I had not. Still i could see the red rectangle when the screen refreshed. I had to reboot the system. Now fine.
Hi ,
I am new here.. not new to rooting ....
I used to use my Samsung galaxy grand i9082 but switched to nexus 5 last year...
Since then my grand has been sitting in my cupboard drawer. I also found this phone very slow performance so switched...
But now i am thinking of flashing a custon Rom to increase its performance and remove all the bloatware...
so i need suggestions of a stable custom ROM with good performance and all features working like dual sim ...etc..
Can you guys help me .... ?
Lollipop or Kitkat or Marshmellow expected with fast perfomance and no lagging ( I guess Marshmellow will lag too much so i can go with KK or Lollipop...)
Please suggest me ...
CM12.1
I cant even flash my recovery...( i dont know why.... its so easy for nexus 5 )
First of all i cant find any download link for CWM recovery for i9082...( .tar file which can be flashed using odin.. ihave the zip file with name CWM_6.0.5.0_Non_Touch_xenon92.zip )
As of now i have downloaded TWRP recovery i9082_TWRP_skullface.tar which is flashed successfully using odin3 v3.07.
but when i restart the device after booting into android it again shows android recovery ...
I also tried the unchecking the auto reboot in odin and removing battery after flashing and trying to boot into recovery but again no result ..everytime the samsung logo comes and again phone restarts and same goes again and again till i boot into the android.
Can anyone give me the CWM recovery...thanks in advance....
Also i have download 2 super user SU files with diffrent version.... UPDATE-SuperSU-v1.25_2.zip and UPDATE-SuperSU-v2.46.zip ...can anyone confirm if the latter one ( new version ) will work.....
anirudh.88 said:
I cant even flash my recovery...( i dont know why.... its so easy for nexus 5 )
First of all i cant find any download link for CWM recovery for i9082...( .tar file which can be flashed using odin.. ihave the zip file with name CWM_6.0.5.0_Non_Touch_xenon92.zip )
As of now i have downloaded TWRP recovery i9082_TWRP_skullface.tar which is flashed successfully using odin3 v3.07.
but when i restart the device after booting into android it again shows android recovery ...
I also tried the unchecking the auto reboot in odin and removing battery after flashing and trying to boot into recovery but again no result ..everytime the samsung logo comes and again phone restarts and same goes again and again till i boot into the android.
Can anyone give me the CWM recovery...thanks in advance....
Also i have download 2 super user SU files with diffrent version.... UPDATE-SuperSU-v1.25_2.zip and UPDATE-SuperSU-v2.46.zip ...can anyone confirm if the latter one ( new version ) will work.....
Click to expand...
Click to collapse
Nevermind i got it ....
if anyone else needs help ...
I used below mentioned files
1) UPDATE-SuperSU-v2.46.zip for rooting....
2) twrp-2.8.6.0-i9082.tar downloaded from twrp website latest version....
Steps:...
1) Flashedtwrp from odin..
2) after RES OK !! success message in odin .... removed battery ...
3) put battery back....
4) pressed vol UP + home + power ...and voila!!!
5) booted into TWRP recovery....
6) flashed UPDATE-SuperSU-v2.46.zip from external-sd .....
Now if anyone can anyone please provide good custom ROM suggestions...
anirudh.88 said:
Nevermind i got it ....
if anyone else needs help ...
I used below mentioned files
1) UPDATE-SuperSU-v2.46.zip for rooting....
2) twrp-2.8.6.0-i9082.tar downloaded from twrp website latest version....
Steps:...
1) Flashedtwrp from odin..
2) after RES OK !! success message in odin .... removed battery ...
3) put battery back....
4) pressed vol UP + home + power ...and voila!!!
5) booted into TWRP recovery....
6) flashed UPDATE-SuperSU-v2.46.zip from external-sd .....
Now if anyone can anyone please provide good custom ROM suggestions...
Click to expand...
Click to collapse
kitkat- cosmic CM
lollipop - latest cm12.1
anirudh.88 said:
Nevermind i got it ....
if anyone else needs help ...
I used below mentioned files
1) UPDATE-SuperSU-v2.46.zip for rooting....
2) twrp-2.8.6.0-i9082.tar downloaded from twrp website latest version....
Steps:...
1) Flashedtwrp from odin..
2) after RES OK !! success message in odin .... removed battery ...
3) put battery back....
4) pressed vol UP + home + power ...and voila!!!
5) booted into TWRP recovery....
6) flashed UPDATE-SuperSU-v2.46.zip from external-sd .....
Now if anyone can anyone please provide good custom ROM suggestions...
Click to expand...
Click to collapse
Try this rom: http://forum.xda-developers.com/showthread.php?t=3073108
That is a CM 12.1 port to grand duos by pawitp. It is pretty stable and functional. Though I experienced frequent freezing with the latest build 20151115, I got it fixed by installing frost kernel ( here: http://forum.xda-developers.com/showthread.php?t=2927449).
After installing frost kernel, adjust your cpu governor to lulzactive, and your i/o scheduler to sioplus (the most recommended setting for Grand duos with CM 12.1).
Though the consequences of using custom kernel with that rom is that you can no longer uses delta upgrade features of that rom, you have to download full update build and flash it as if you're to flash new rom (though without wiping cache partition and dalvik cache).
Good luck with your quest to find perfect rom for your grand duos!
Install CM12.1 (Based on Lollipop 5.1.1) by pawitp. It is stable and very fast. I'm using it currently