Develop Bugs

nandroid backup for lava xolo q1000

Hi there
after the installation of chainfire 3D my phone doesn't started...so i require nandroid backup ...is there any q1000 user who can provide me

I have same problem
pramod_420 said:
Hi there
after the installation of chainfire 3D my phone doesn't started...so i require nandroid backup ...is there any q1000 user who can provide me
Click to expand...
Click to collapse
Please help us!

Xolo Q1000 Soft bricked, stucked in Logo
ajays said:
Please help us!
Click to expand...
Click to collapse
Hi all, my problem is kind of same, after trying to push the acid audio mod through adb, my q1000 is soft bricked, i can boot into recovery but the phone is stuck at xolo logo in case of a normal boot. I tried to update the stock rom of cherry mobile omega hd2 as it is almost same as xolo q1000, through the adb sideload option but the installation is getting aborted every time. Later I noticed no update is getting done via adb sideload, it is sending the files to the phone but the installation gets aborted every time. I do not have any update package in my internal memory and it wont detect the external sd card in recovery so cant flash any zip from sd as well. The adb server is detecting the phone when i am checking the "update through adb server" option in recovery as "device id.......sideload"...not as a "device". My usb debugging is not enabled, so that's probably the reason its not getting detected...not sure. I have another xolo q1000 from which i can take a nandroid backup but I am not sure how to flash it, as adb or no other "flash tools" is detecting the phone. Any suggestion from devs?? Before the soft brick i have rooted my phone so cant send it to the xolo care as the warranty is already void.
Need help asap, i really loved the white xolo.....Thanking in advance.
Edit - Had drivers problem, reinstalled everything from scratch, now the phone is getting detected in sp_flash tool, done memory and emmc test also....it is working as it should, but still no backup or stock rom available, please, is there someone who is listening to me...or "us" who are having a bootlooped xolo q1000?

pramod_420 said:
Hi there
after the installation of chainfire 3D my phone doesn't started...so i require nandroid backup ...is there any q1000 user who can provide me
Click to expand...
Click to collapse
Is CWM recovery installed in your phone?..then i can post my cwm backup if you want
---------- Post added at 11:47 PM ---------- Previous post was at 11:41 PM ----------
aryanchinha said:
Hi all, my problem is kind of same, after trying to push the acid audio mod through adb, my q1000 is soft bricked, i can boot into recovery but the phone is stuck at xolo logo in case of a normal boot. I tried to update the stock rom of cherry mobile omega hd2 as it is almost same as xolo q1000, through the adb sideload option but the installation is getting aborted every time. Later I noticed no update is getting done via adb sideload, it is sending the files to the phone but the installation gets aborted every time. I do not have any update package in my internal memory and it wont detect the external sd card in recovery so cant flash any zip from sd as well. The adb server is detecting the phone when i am checking the "update through adb server" option in recovery as "device id.......sideload"...not as a "device". My usb debugging is not enabled, so that's probably the reason its not getting detected...not sure. I have another xolo q1000 from which i can take a nandroid backup but I am not sure how to flash it, as adb or no other "flash tools" is detecting the phone. Any suggestion from devs?? Before the soft brick i have rooted my phone so cant send it to the xolo care as the warranty is already void.
Need help asap, i really loved the white xolo.....Thanking in advance.
Edit - Had drivers problem, reinstalled everything from scratch, now the phone is getting detected in sp_flash tool, done memory and emmc test also....it is working as it should, but still no backup or stock rom available, please, is there someone who is listening to me...or "us" who are having a bootlooped xolo q1000?
Click to expand...
Click to collapse
install cwm recovery on your working phone..please follow my thread..but before that make sure your phone is rooted.
after cwm recovery is successfully flashed... enter in recovery mode and there you will see backup option..all d bst:good:

Is CWM recovery installed in your phone?..then i can post my cwm backup if you want
Click to expand...
Click to collapse
no , i didn't.

arkaredevil said:
Is CWM recovery installed in your phone?..then i can post my cwm backup if you want
---------- Post added at 11:47 PM ---------- Previous post was at 11:41 PM ----------
install cwm recovery on your working phone..please follow my thread..but before that make sure your phone is rooted.
after cwm recovery is successfully flashed... enter in recovery mode and there you will see backup option..all d bst:good:
Click to expand...
Click to collapse
RECOVERED the bootlooped phone, its working fine now, thanks for the support
---------- Post added at 05:13 AM ---------- Previous post was at 04:42 AM ----------
pramod_420 said:
no , i didn't.
Click to expand...
Click to collapse
I can not probably post link now as i am a new user, but google with andridjugad with xolo q1000, you will find a full backed up rom there which is a stock rom of xolo q1000....u can flash your phone directly with the backup....

CWM Backup of XOLO Q100
I want to upload XOLO Q1000 CWM Backup in zip file (311 MB). Please help me to do it. I will post rooting and flushing CWM method for XOLO Q1000 in my next post. I am waiting. Thankx XDA and Dev.

pramod_420 said:
Hi there
after the installation of chainfire 3D my phone doesn't started...so i require nandroid backup ...is there any q1000 user who can provide me
Click to expand...
Click to collapse
Hi Pramod
I have nandriod back up if you want I will provide you also you need CWM Recovery if you do not have then reply
I will provide you all necessary files to the restore your phone.

Xolo Q1000 Stock Nanodroid Backup, Rooting and Flushing CWM Method.
I have created a full guide including Xolo Q1000 Stock Nanodroid Backup, Rooting and Flushing CWM Method. Please follow this thread
Xolo Q1000 Stock Nanodroid Backup, Rooting and Flushing CWM Method.
http://forum.xda-developers.com/showthread.php?t=2355829
Press Thanx if it helped.

pramod_420 said:
Hi there
after the installation of chainfire 3D my phone doesn't started...so i require nandroid backup ...is there any q1000 user who can provide me
Click to expand...
Click to collapse
My xolo Q1000 doesnt also reboot after i installed Chainfire 3D. Did you fix yours ? how ?
p.s : i dont have cwm recovery

Flash stock rom via SP Flash Tool
Here's what u need:
1.Proper device drivers
2.Sp Flash tools working version
3.Stock rom: http://www.needrom.com/mobile/xolo-q1000/ (have to register)
Here's working instructions...
Instructions for flashing using SP Flash Tools:
1. Install drivers for your phone using XOLO drivers.
2. Extract the Stock ROM folder.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
5.Ceck all files.(Default is already checked)
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware > Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
Warning 1 - Don't interrupt this process as it can potentially brick your device.
Warning 2 - Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.
Done... Enjoy...

thanks for above tutorial.
it will help me in future.
currently i have problem with my xolo q1000
whch is installed miui v5 .
but there i cant use 3g service..
help me...

Worked for my xolo q1000
aryanchinha said:
Hi all, my problem is kind of same, after trying to push the acid audio mod through adb, my q1000 is soft bricked, i can boot into recovery but the phone is stuck at xolo logo in case of a normal boot. I tried to update the stock rom of cherry mobile omega hd2 as it is almost same as xolo q1000, through the adb sideload option but the installation is getting aborted every time. Later I noticed no update is getting done via adb sideload, it is sending the files to the phone but the installation gets aborted every time. I do not have any update package in my internal memory and it wont detect the external sd card in recovery so cant flash any zip from sd as well. The adb server is detecting the phone when i am checking the "update through adb server" option in recovery as "device id.......sideload"...not as a "device". My usb debugging is not enabled, so that's probably the reason its not getting detected...not sure. I have another xolo q1000 from which i can take a nandroid backup but I am not sure how to flash it, as adb or no other "flash tools" is detecting the phone. Any suggestion from devs?? Before the soft brick i have rooted my phone so cant send it to the xolo care as the warranty is already void.
Need help asap, i really loved the white xolo.....Thanking in advance.
Edit - Had drivers problem, reinstalled everything from scratch, now the phone is getting detected in sp_flash tool, done memory and emmc test also....it is working as it should, but still no backup or stock rom available, please, is there someone who is listening to me...or "us" who are having a bootlooped xolo q1000?
Click to expand...
Click to collapse
Hey install flash tools and conect your phone with battery removed and open SP_Flash_Tool_v3.1316.0.150 after installing drivers.Then if your phone is not showing sp flashtools remove and re-connect your phone with usb data cable and the flashing of rom should start worked for me.

zahinhaq said:
My xolo Q1000 doesnt also reboot after i installed Chainfire 3D. Did you fix yours ? how ?
p.s : i dont have cwm recovery
Click to expand...
Click to collapse
Flash cwm recovery then flash stock rom

I have install custom ROM 4.2.1 on my xoli 1000 . i have taken backup of stock ROM via cwm recovery, but I cannot restore this backup as error comes of Md sum check.
Kindly help regarding this
Sent from my Q1000 using XDA Premium 4 mobile app

If the backup file is corrupted then you can't restore it. But if you want stock ROM then you can get the CWM flashable ZIP file. If you need reply back.
haririnku said:
I have install custom ROM 4.2.1 on my xoli 1000 . i have taken backup of stock ROM via cwm recovery, but I cannot restore this backup as error comes of Md sum check.
Kindly help regarding this
Sent from my Q1000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse

haririnku said:
I have install custom ROM 4.2.1 on my xoli 1000 . i have taken backup of stock ROM via cwm recovery, but I cannot restore this backup as error comes of Md sum check.
Kindly help regarding this
Sent from my Q1000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Open nandroid.md5 file in text editor and delete everything inside.. And make the file blank.. Now save it and restore via cwm..
Sent from my Galaxy Nexus using XDA Premium 4 mobile app

How to install CWM recovery for Noir A900

Installing CWM Recovery For Qmobile Noir A900
1. Root your Noir A900
You can root it from thread I posted already here
http://forum.xda-developers.com/showthread.php?t=2354153
2. Download CWM recovery image for Qmobile Noir A900 attached below.
3.Extract it and copy recovery.img to root of your sdcard
4.Download and install application Mobileuncle MTK Tools on Your Mobile. You can download it from Google play store on your device.
5.Run Mobileuncle tools application to your device and select recovery update
6.select recover.img file in sdcard
7. Allow super user permissions and reboot recovey
Thats it you will be in CWM recovey menu on your device .
Remember to Hit Thanks button

Which version of cwmr is this ?

CWM For Noir A900
lalibm said:
Which version of cwmr is this ?
Click to expand...
Click to collapse
this is CWM-Based Recovery v6.0.2.8

help
i need custom rom for a900...
also the gps fix for quick locking, and ROOT/UNROOT app for a900

root noir
pricelesspegasus said:
i need custom rom for a900...
also the gps fix for quick locking, and ROOT/UNROOT app for a900
Click to expand...
Click to collapse
Dear root method is in step 1 of above post click on link given in above post for root

Stock rom needed for q mobile a900
Can anyone please post the stock rom or any other compatible rom for q mobile a900
I screwed up the original a900 rom, could not find a replacement rom so used the gionee elife rom. But sp tools is giving an error message saying that there is not enough space to copy the rom. Why is that happening?

Need stock rom
saranglq said:
Can anyone please post the stock rom or any other compatible rom for q mobile a900
I screwed up the original a900 rom, could not find a replacement rom so used the gionee elife rom. But sp tools is giving an error message saying that there is not enough space to copy the rom. Why is that happening?
Click to expand...
Click to collapse
I can help u dear please I m advising u don't flash any thing with sp flash tool. And post me current status of ur device; whether it boots in recovery mode or not. Send detail what u do with ur phone to reach at this problem

New_ideas said:
[Qcananglq;43829886]Can anyone please post the stock rom or any other compatible rom for q mobile a900
I screwed up the original a900 rom, could not find a replacement rom so used the gionee elife rom. But sp tools is giving an error message saying that there is not enough space to copy the rom. Why is that happening?
Click to expand...
Click to collapse
I can help u dear please I m advising u don't flash any thing with sp flash tool. And post me current status of ur device; whether it boots in recovery mode or not. Send detail what u do with ur phone to reach at this problem[/QUOTE]
Oh, no. I already did that. I kept experimenting and now even the bootload screen would not show up. it is simply bricked,
I tried to install chainfire 3d. I did not realize that it is not compatible with ICS. so initially my phone was simply stuck at boot load, i.e. noir logo would show up but it would go no further. then i tried using factory reset, but it didn't work. tried replacing recovery.img and preloader only, didn't work. then tried to install a gionee elife 3 rom. got this message that not enough space. Now i'm stuck
Should I take it to the service centre?

Need stock rom
saranglq said:
Oh, no. I already did that. I kept experimenting and now even the bootload screen would not show up. it is simply bricked,
I tried to install chainfire 3d. I did not realize that it is not compatible with ICS. so initially my phone was simply stuck at boot load, i.e. noir logo would show up but it would go no further. then i tried using factory reset, but it didn't work. tried replacing recovery.img and preloader only, didn't work. then tried to install a gionee elife 3 rom. got this message that not enough space. Now i'm stuck
Should I take it to the service centre?
Click to expand...
Click to collapse
OK can tell or phone boot in recovery or not . have u backed up before experimenting. And have u properly installed sp flash tool drivers. Hve u any recovery image to flash?

New_ideas said:
I can help u dear please I m advising u don't flash any thing with sp flash tool. And post me current status of ur device; whether it boots in recovery mode or not. Send detail what u do with ur phone to reach at this problem
OK can tell or phone boot in recovery or not . have u backed up before experimenting. And have u properly installed sp flash tool drivers. Hve u any recovery image to flash?
Click to expand...
Click to collapse
I made no back up. Although sp tools has been installed properly

Stock rom
saranglq said:
I made no back up. Although sp tools has been installed properly
Click to expand...
Click to collapse
1. Is sp flash tool still detects ur phone?
2. have u proper scatter file for ur phone?
3. Is ur device boots in recovery mode or not? (I have asking 3rd time this)

backup rom
i need the backup stock rom for A900.. if anybody can upload that i'd be very thankfull!

New_ideas said:
Installing CWM Recovery For Qmobile Noir A900
1. Root your Noir A900
You can root it from thread I posted already here
http://forum.xda-developers.com/showthread.php?t=2354153
2. Download CWM recovery image for Qmobile Noir A900 attached below.
3.Extract it and copy recovery.img to root of your sdcard
4.Download and install application Mobileuncle MTK Tools on Your Mobile. You can download it from Google play store on your device.
5.Run Mobileuncle tools application to your device and select recovery update
6.select recover.img file in sdcard
7. Allow super user permissions and reboot recovey
Thats it you will be in CWM recovey menu on your device .
Remember to Hit Thanks button
Click to expand...
Click to collapse
Im Unable To Boot Into Recovery!! It Stucks At Qmobile Logo!!

What u do to or phone?

stock rom backup
pricelesspegasus said:
i need the backup stock rom for A900.. if anybody can upload that i'd be very thankfull!
Click to expand...
Click to collapse
I can help u

New_ideas said:
What u do to or phone?
Click to expand...
Click to collapse
The Recovery Uh Hav Provided Didnt Work!
But The Recovery Here Worked!! http://forum.xda-developers.com/showthread.php?t=2370987

It may be different size for ur phone. I have tested personally it works fine.

Can you provide the rom for a900 I need it. I will be thankful if the rom is sp flash tool flashable. I flashed blu life rom it starts but I am having problem like sims are not detectable and also when I try to recover from my cwm backup it gived error restoring system. Plz help.
Sent from my GT-N7100 using xda app-developers app

I flashed the wrong recovery.img using sp flastool can anyone provide me with the original scatter.txt and recovery.img for stock rom or nandroid backup of a900

DeeJayAhmed said:
The Recovery Uh Hav Provided Didnt Work!
But The Recovery Here Worked!! http://forum.xda-developers.com/showthread.php?t=2370987
Click to expand...
Click to collapse
I agree the recovery image you provided made my phone stuck to Qmobile logo then i read this message and downloaded the recovery image's link this guy has given and it worked perfect.

[Q] SM-P600 Bricked (no recovery)

Hi,
SM-P600 without ROM, without recovery, Kies and Odin doesn't work.
How can I reflash stock ROM or CM12 rom ?
Device : SM-P600 (with samsung rom stock 4.4!?)
I root my tablet with odin and teamwin 2.8.0.0 (PDA field + tar file)
the root flash should success.
I restart in recovery and install custom rom CM12 + Gapp
the tablet restart and stay to CM12 loading during all the night.
I come back into recevery mode
I try to wipe cache/dalvik => unable to mount cache/dalvik
I try to wipe cache => unable to mount cache
I try to wipe system => unable to mount system
I install Kies on my computer and try to restore the official rom with it.
The download of the rom is ok and Kies try to send the rom to the table a transfer is running during 15min (progress bar into computer windows, but no progress bar into tablet).
After that a second transfer progress bar into computer stay to 0% during 1 hour. I unplug my tablet.
Now I have got a table without recovery. I have access to download mode.
But I cannot transfer stock rom (PDA field) with Odin.
Thx for your help.
Staying at your disposal

I can flash recovery mod (TeamWin) with Odin.
But I cannot send Kies tar file by Odin.
I am downloading old stock rom (*tar) to transfer by Odin 3.09
How can I convert a CM12 zip file in tar file to tranfer it (I haven't SD card)

You could use a USB OTG cable (micro USB plug on one end and a socket like the USB ones on a computer on the other), one of these:
http://m.ebay.com.au/itm/301542874539?nav=SEARCH
And use it to plug a USB stick with the zip file on it into your tablet. You would have to mount it in twrp before flashing the zip.
They are a very useful cable to have, if your screen breaks and touch doesn't work you can use it to plug a mouse into the android device and use that for things like backing up your data before repair or disposal.

Hi I fixed the problem,
Re-Flash TWRP (many time) en try to install an unofficial KitKat version (information were write into NAND) but this version bootloop.
I wipe cache, cache/dalvik, Data, System (some eror were display in red, mount error)
I install the unofficial CM12, then the Android invite was displayed :victory:
I setup the unoficial CM12.
Reboot in recovery mode to install gapp
@Nameless One, thx for your help. In TWRP, the mount doesn't work in my case !? (It works with my Galaxy S4)
Appology for my poor English

Hi Dribounet
Dribounet said:
Hi I fixed the problem,
Re-Flash TWRP (many time) en try to install an unofficial KitKat version (information were write into NAND) but this version bootloop.
I wipe cache, cache/dalvik, Data, System (some eror were display in red, mount error)
I install the unofficial CM12, then the Android invite was displayed :victory:
I setup the unoficial CM12.
Reboot in recovery mode to install gapp
@Nameless One, thx for your help. In TWRP, the mount doesn't work in my case !? (It works with my Galaxy S4)
Appology for my poor English
Click to expand...
Click to collapse
Hi Dribounet
I have similar issue with my SM-P600.
I have tried 10 official roms , official and custom recoveries also , without success. I am absolutely sure that I am not following correctly the procedure using Odin and its version or combination of this plus wrong official ROM and so on.
Also have tried to use PIT file because I think something goes wrong with the partitions but not success again,
Would you advice with your steps you follow in order to succeed installing custom recovery.
Can I install only the recovery without ROM and how I can run in it ( button combinations)
For now I am just able to run in Download mode and with one official ROM to run the process to the middle- then goes in error with Odin and when reboot the device it shows message "Firmware upgrade encountered an issue ..... "
Thanks in advance for all answers

p600 bricked
kafencetu said:
Hi Dribounet
I have similar issue with my SM-P600.
I have tried 10 official roms , official and custom recoveries also , without success. I am absolutely sure that I am not following correctly the procedure using Odin and its version or combination of this plus wrong official ROM and so on.
Also have tried to use PIT file because I think something goes wrong with the partitions but not success again,
Would you advice with your steps you follow in order to succeed installing custom recovery.
Can I install only the recovery without ROM and how I can run in it ( button combinations)
For now I am just able to run in Download mode and with one official ROM to run the process to the middle- then goes in error with Odin and when reboot the device it shows message "Firmware upgrade encountered an issue ..... "
Thanks in advance for all answers
Click to expand...
Click to collapse
I have the same problem! There is download mode only - NO recovery, NO rom! ((
I have tried to flash original rom from sammobile via Odin. No results.
Who can help???

uno mas said:
I have the same problem! ((
Who can help???
Click to expand...
Click to collapse
Still do not have the answer and solution.I have start thinking that this is hardware issue. But when i have got it intially from the service it was able to boot in a stock bootloader and I have done something wrong with Odin and since then not able event to go in stock or custom bootloader.
Sent from my LG-D855 using Tapatalk

kafencetu said:
Still do not have the answer and solution.I have start thinking that this is hardware issue. But when i have got it intially from the service it was able to boot in a stock bootloader and I have done something wrong with Odin and since then not able event to go in stock or custom bootloader.
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
In other words - should I go to the service?

uno mas said:
In other words - should I go to the service?
Click to expand...
Click to collapse
If you did not do something with it that makes the warranty not valid it is advisable to send it to service, unfortunatelly I have rooted it and they refused to accept it
Sent from my LG-D855 using Tapatalk

kafencetu said:
If you did not do something with it that makes the warranty not valid it is advisable to send it to service, unfortunatelly I have rooted it and they refused to accept it
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
SOLVED!!!
http://forum.xda-developers.com/showthread.php?t=2719750
http://forum.xda-developers.com/galaxy-note-10-2014/help/pit-stock-pit-file-thread-t2989266

uno mas said:
I have rooted also. No the warranty. But it doesn't matter if you have a bricked. ((
The Odin starts writing but no finish.
Click to expand...
Click to collapse
yep this is the case , Odin start process of writing and then suddenly - error - in the middle of the procedure.
I have tried to install only custom bootloader - pass successfully ,but then I am not able to go in bootloader mode ( I am trying with Volume down + Power , do not know is that correct - do you have an idea? )

uno mas said:
SOLVED!!!
http://forum.xda-developers.com/showthread.php?t=2719750
http://forum.xda-developers.com/galaxy-note-10-2014/help/pit-stock-pit-file-thread-t2989266
Click to expand...
Click to collapse
Hello uno mas
would you advice what tools you have used and also what order you have follow.
First update PIT and then installed the ROM or other
Thanks in advance for time and efforts!

[GUIDE] Root Android 5.1 lollipop

Hello there,
i have rooted my canvas a1 lollipop 5.1, so i came here to help you to root your lollipop 5.1 if you dont know how to.
-> download the UPDATE-SuperSU-v2.45
-> place the file in the sdcard
-> Reboot into your custom recovery
-> choose install zip, choose the downloaded zip file and install it
-> [if CWM recovery ask to fix anything like [fix system/xbin/su...] then select No
-> Reboot your phone and your phone will be rooted
//This method may be working for other android one devices, if working please comment here
//DONT POINT AT ME FOR YOUR BAD LUCK/MISTAKE
DOWNLOAD THE GIVEN ATTACHMENT

bro can you make a recovery for xolo one lollipop 5.0
this is link for stock recovery based on lollipop https://drive.google.com/file/d/0B77YgBXvZB2kc3UybzRtTXRCaUk/view
if you want boot image i will upload pls help

Cant help
jaspalsingh said:
bro can you make a recovery for xolo one lollipop 5.0
this is link for stock recovery based on lollipop https://drive.google.com/file/d/0B77YgBXvZB2kc3UybzRtTXRCaUk/view
if you want boot image i will upload pls help
Click to expand...
Click to collapse
Sorry i cant help you in this matter.

help
I'm new bro kindly help me I tried all ways to root my phone but can't hope this works
I have à1 with lollipop how to reboot to custom recovery.?

visit this page
http://forum.xda-developers.com/canvas-a1/help/guide-root-android-5-1-lollipop-t3064642

redirected to current page
I have downloaded the zip file what next .?? I placed it in SD card what shud I do now reply fast plzz

http://forum.xda-developers.com/canvas-a1/help/root-everything-scratch-extreme-t3066260
Read again the rooting process from the given link

Signature verification failed
Hi,
I followed all steps correctly but when i tried to install the super SU zip file i encountered an error saying "Signature Verification failed" and installation aborted . What may be the issue, any advices please.

abuvbu said:
Hi,
I followed all steps correctly but when i tried to install the super SU zip file i encountered an error saying "Signature Verification failed" and installation aborted . What may be the issue, any advices please.
Click to expand...
Click to collapse
Toggle signature verification in cwm and then install

Cant toggle signature verification
Hi,
When i go into recovery, i see an android laying with exclamation mark and it says no command beneath, then i have to press power and volume up button to open menu, i am attaching the screens can please take a look at it.
I did some R&D over the internet and i got to know the there is an option called install from zip under one can toggle signature verification but i cant find that option in my recovery module.
Also the recovery menu dosent look like any cwm recovery interface.

abuvbu said:
Hi,
When i go into recovery, i see an android laying with exclamation mark and it says no command beneath, then i have to press power and volume up button to open menu, i am attaching the screens can please take a look at it.
I did some R&D over the internet and i got to know the there is an option called install from zip under one can toggle signature verification but i cant find that option in my recovery module.
Also the recovery menu dosent look like any cwm recovery interface.
Click to expand...
Click to collapse
You need a custom recovery to flash SuperSU and you have the stock recovery.

i used the recovery provided in the rooting procedure above.... also i cannot find cwm recovery on the internet for Mmx a1.... should i try looking for twrp ??

abuvbu said:
i used the recovery provided in the rooting procedure above.... also i cannot find cwm recovery on the internet for Mmx a1.... should i try looking for twrp ??
Click to expand...
Click to collapse
Flash Philz recovery from here http://forum.xda-developers.com/cro.../tut-how-to-root-android-one-devices-t2928240 . follow this guide worked for me on android L

Hi,
Thank you philz was a success. I have another phone MMX canvas 4plus A315. Will this philz work on the phone too....

Custom Recovery Required
abuvbu said:
Hi,
When i go into recovery, i see an android laying with exclamation mark and it says no command beneath, then i have to press power and volume up button to open menu, i am attaching the screens can please take a look at it.
I did some R&D over the internet and i got to know the there is an option called install from zip under one can toggle signature verification but i cant find that option in my recovery module.
Also the recovery menu dosent look like any cwm recovery interface.
Click to expand...
Click to collapse
You need to flash the file using a custom recovery.

abuvbu said:
Hi,
Thank you philz was a success. I have another phone MMX canvas 4plus A315. Will this philz work on the phone too....
Click to expand...
Click to collapse
No.this recovery only works on Android one phone.

Can you upload your "build.prop file " which is inside the system folder.
I need it. Actually my phone has been bricked, so i want android one default build.prop file.
Thanks for your help.

How to root
Can I use this file to root Micromax canvas spark 2 without unlocking the bootloader. Plz help me to root it...I tried kingroot many times with the latest and the old versions. .But all of them failed.

Help
my canvas a1 is running on 5.1.1
bro plz tell me how to boot into custom recovery mode.
because have read that to install custom recovery your device should be rooted?

Hi I have micromax e 471 , I want to root my cell, but don't know how to do it

Help Needed....Canvas A1 Recovery mode showing No command found please help....

hi,
I had rooted my Canvas A1, and unrooted it from the super Su, Now I don't have root access but when I tried to the OTA update it showed error,Am currently on LMY47V, Now i tried to use your method but when i reboot into recovery and select recovery mode its showing NO Command Found, can you please help me...
Thanks

I was having the exact same problem. I did the following and this worked for me.
1. Unlocked bootloader using Android one toolkit.
2. rooted again and installed twrp recovery, took full backup.
3. Flashed kitkat stock rom using sp flash tools.
4. Locked bootloader using Android One toolkit.
5. got the update notification right away. ~444 mb.
Successfully updated to Marshmallow.
Let me know if you need further help.

Dalekv7 said:
I was having the exact same problem. I did the following and this worked for me.
1. Unlocked bootloader using Android one toolkit.
2. rooted again and installed twrp recovery, took full backup.
3. Flashed kitkat stock rom using sp flash tools.
4. Locked bootloader using Android One toolkit.
5. got the update notification right away. ~444 mb.
Successfully updated to Marshmallow.
Let me know if you need further help.
Click to expand...
Click to collapse
unlocking bootloader will wipe all the date right ??

shyamkrrish66166 said:
hi,
I had rooted my Canvas A1, and unrooted it from the super Su, Now I don't have root access but when I tried to the OTA update it showed error,Am currently on LMY47V, Now i tried to use your method but when i reboot into recovery and select recovery mode its showing NO Command Found, can you please help me...
Thanks
Click to expand...
Click to collapse
STEP 1: DOWNLOAD the FLASH TOOL from this this link :LINK TO DOWNLOAD FILE
It is almost 30 MB in Size. And EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) of your computer.
STEP 2: DOWNLOAD LOLLIPOP FLASH FILE
DOWNLOAD LINK FOR LOLLIPOP: HERE
After downloading this flash file EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) on your computer.
STEP 3: NOW INSTALL DRIVERS:
YOU NEED TO BE ON WINDOWS 7 TO INSTALL DRIVERS (WINDOWS 8 DOESN'T SUPPORT THIS DRIVER / PHONE IS NOT DETECTED)
DOWNLOAD DRIVERS from this link : HERE
EXTRACT AND INSTALL THE DRIVERS : Next next next and finish If you see an security warning ( a red coloured pop up ) choose INSTALL IT ANYWAY
IT IS RECOMMENDED YOU TO RESTART YOUR PC.
STEP 4:
Now we have Extrated /unziped 2 files. One is FLASHTOOLS and other is FLASH FILE and Extracted it or unziped it to Desktop or Somewhere.
One of it having the name SP_Flash_Tool_exe_windows_v5.1424.00 or open both folders then one of it having the flashing tool. OPEN THE FOLDER NAMED SP_Flash_Tool_exe_windows_v5.1424.00
it contains an application named fashtool.exe OPEN IT
NOW THE APPLICATION IS ASKING FOR SCATTER LOADING FILE
its a txt file which is on the extracted flash file folder
BROWSE it by clicking Button named Scatter Loading
click OPEN
STEP 5:
HERE IN THE DROPDOWN BOX, IT SAYS DOWNLOAD ONLY, CLICK ON IT AND SELECT FIRMWARE UPDATE ONLY.
IF YOU SELECT FORMAT + DOWNLOAD, THEN YOU WILL LOOSE IMEI NUMBER.
NOW CLICK DOWNLOAD BUTTON ( GREEN ARROWED BUTTON NAMED DOWNLOAD )
IN CASE YOU LOOSE IMEI NUMBER, THEN REFER HERE
STEP 6:
Now SWITCH OFF your PHONE and REMOVE BATTERY
STEP 7:
CONNECT your PC via USB CABLE
wait for the driver Detection.
THE FLASHING PROCESS WILL START AUTOMATICALLY you can See the progress in progress bar which is on bottom of flashing tool Application.
WHEN IT IS FINISHED DISCONNECT USB AND RESTART YOUR PHONE.
NOW YOU WILL GET LOLLIPOP UPDATE IMEDIATELY.
:good::good:HIT THANKS IF HELPED!:good::good:

This is the screen I am getting when I enter recovery mode

Dalekv7 said:
I was having the exact same problem. I did the following and this worked for me.
1. Unlocked bootloader using Android one toolkit.
2. rooted again and installed twrp recovery, took full backup.
3. Flashed kitkat stock rom using sp flash tools.
4. Locked bootloader using Android One toolkit.
5. got the update notification right away. ~444 mb.
Successfully updated to Marshmallow.
Let me know if you need further help.
Click to expand...
Click to collapse
this is the screen I am getting when I enter recovery mode

shyamkrrish66166 said:
This is the screen I am getting when I enter recovery mode
Click to expand...
Click to collapse
After entering recovery mode, you will see a dead android bot. Below, you will see NO COMMAND
Here, hold down the power button and press the volume up button once. Then release both buttons.
Now, you are successfully in recovery mode.
:good::good:HIT THANKS IF HELPED:good::good:

shyamkrrish66166 said:
this is the screen I am getting when I enter recovery mode
Click to expand...
Click to collapse
Just follow the method suggested by Raizen above. But there are two things I want to add:-
1. The drivers work successfully on windows 8 and 10. It's just that you have to turn off driver signature verification for a while. So don't worry if you have w8 or 10.
2. After flashing kitkat you will get a notification to update to Marshmallow and not lollipop.
P.s.- My opinion on Marshmallow- Everything's fine except the battery backup. I don't know if the issue has been resolved now. But I faced more than 30% drain overnight with location and WiFi off. I'm on CyanogenMod 12.1 now and I find it much better both in terms of battery backup and functionality.

Thanks guys. I will try it and let you know.

Dalekv7 said:
Just follow the method suggested by Raizen above. But there are two things I want to add:-
1. The drivers work successfully on windows 8 and 10. It's just that you have to turn off driver signature verification for a while. So don't worry if you have w8 or 10.
2. After flashing kitkat you will get a notification to update to Marshmallow and not lollipop.
P.s.- My opinion on Marshmallow- Everything's fine except the battery backup. I don't know if the issue has been resolved now. But I faced more than 30% drain overnight with location and WiFi off. I'm on CyanogenMod 12.1 now and I find it much better both in terms of battery backup and functionality.
Click to expand...
Click to collapse
Thanks. .. I will try it and let you knw
Raizen12465 said:
After entering recovery mode, you will see a dead android bot. Below, you will see NO COMMAND
Here, hold down the power button and press the volume up button once. Then release both buttons.
Now, you are successfully in recovery mode.
:good::good:HIT THANKS IF HELPED:good::good:
Click to expand...
Click to collapse

Raizen12465 said:
After entering recovery mode, you will see a dead android bot. Below, you will see NO COMMAND
Here, hold down the power button and press the volume up button once. Then release both buttons.
Now, you are successfully in recovery mode.
:good::good:HIT THANKS IF HELPED:good::good:
Click to expand...
Click to collapse
Hi , one more doubt, I had rooted my phone ,later I unrooted it from the super su ,now I don't have root access, can I root it again in the normal way, I used kingoroot but it failed,
thanks

shyamkrrish66166 said:
Hi , one more doubt, I had rooted my phone ,later I unrooted it from the super su ,now I don't have root access, can I root it again in the normal way, I used kingoroot but it failed,
thanks
Click to expand...
Click to collapse
You can use kingroot or android one toolkit to root your phone if you are running KITKAT or LOLLIPOP.
To root MARSHMALLOW, you need to follow the steps mentioned HERE
:good::good:

I wanna tell u to use battery doctor to save ur battery with its new feature ''super optimize' , I m using it and only 8-10% drain out in one night with data on.
Sent from my Micromax AQ4501 using xda premium
---------- Post added at 06:13 PM ---------- Previous post was at 06:09 PM ----------
Dalekv7 said:
Just follow the method suggested by Raizen above. But there are two things I want to add:-
1. The drivers work successfully on windows 8 and 10. It's just that you have to turn off driver signature verification for a while. So don't worry if you have w8 or 10.
2. After flashing kitkat you will get a notification to update to Marshmallow and not lollipop.
P.s.- My opinion on Marshmallow- Everything's fine except the battery backup. I don't know if the issue has been resolved now. But I faced more than 30% drain overnight with location and WiFi off. I'm on CyanogenMod 12.1 now and I find it much better both in terms of battery backup and functionality.
Click to expand...
Click to collapse
I wanna tell u to use battery doctor to save ur battery with its new feature ''super optimize' , I m using it and only 8-10% drain out in one night with data on.
Sent from my Micromax AQ4501 using xda premium

shyamkrrish66166 said:
Thanks. .. I will try it and let you knw
Click to expand...
Click to collapse
Hi,
In marshmallow is there an option to use as card as the internal memory, so that we could install more apps ??

shyamkrrish66166 said:
hi,
I had rooted my Canvas A1, and unrooted it from the super Su, Now I don't have root access but when I tried to the OTA update it showed error,Am currently on LMY47V, Now i tried to use your method but when i reboot into recovery and select recovery mode its showing NO Command Found, can you please help me...
Thanks
Click to expand...
Click to collapse
Hey man ...after showing no command
Press power+ vol up for 5 sec and release
U will be in recovery menu
Hit thanks

I'm trying to flash firmware in Karbonn Sparkle V (Android One) but it is not getting connected with computer. I installed the drivers manually in the computer but when i connect the device, the computer trying to install the device driver software again and getting failed. How to solve the problem?

yes this works
Raizen12465 said:
After entering recovery mode, you will see a dead android bot. Below, you will see NO COMMAND
Here, hold down the power button and press the volume up button once. Then release both buttons.
Now, you are successfully in recovery mode.
:good::good:HIT THANKS IF HELPED:good::good:
Click to expand...
Click to collapse
This method works thanks!!!?