Develop Bugs

HELP please!my defy is stucked with no rom!!

friends and i mean its stucked deep!
i was running cm7 full63 nightly and some app my brother download stuck the phone.i take it in my hands flash it again with wipes and wasent working good.then i go to the cwm again.i do 4 wipes(factory-cache-davlik-battery)and go to mounds and storage and do format chace-data-system!and that was for defy the death!
it downgrade my cwm from 5.something and i have <3e> and it cant find my rom on apply sdcard;update.zip to flash it,it says ,can't mound cache;recovery/log,it cant do nothink with this cwm!!
please help if you want!thank you!!

use rsd lite to flash a stock froyo rom... start from scratch....
Sent from my MB526 using xda premium

what is rsd is this rar http://forum.xda-developers.com/showthread.php?t=1348587?and how i do it?

ok i have download this rom http://www.mediafire.com/?op47dv8yo8iypj1 and the rsd litev5.6
what steps i must do to flash the rom?

alexanter the great said:
ok i have download this rom http://www.mediafire.com/?op47dv8yo8iypj1 and the rsd litev5.6
what steps i must do to flash the rom?
Click to expand...
Click to collapse
Install RSDLite on your PC. Use WinRAR or 7zip to decompress the. gz file you downloaded (there is an sbf file inside - the clean Froyo firmware you want to flash - and save it somewhere.
Take your Defy and press the power and volume up button and release after some seconds so that you enter the bootloader mode (you see some white text on black ground).
Connect the phone via USB with your PC with RSDLite running.
In RSDLite click the button with the three dots and open the sbf file you extracted.
Hit the start button. Now it starts flashing the firmware, takes a couple of minutes.
When it's done the phone reboots and is running a Motorola Froyo firmware (not rooted or something, it can't really be called a ROM). If you want you can root, install CWM again etc and put your ROM in it again.
Almost always when your Defy is doesn't boot anymore or is somehow broken softwarewise, you can use this method to repair it.

thank you for your time.
i have done this steps,i flash this rom with rsd,root it with superoneclick,but i cant install cwm recovery with rom manager so i cant flash cyannogen again.i have found a apk (flipout system recovery)it goes me to recovery but it not working good
how i install the correct cwm recovery for intalling any roms i want?

alexanter the great said:
thank you for your time.
i have done this steps,i flash this rom with rsd,root it with superoneclick,but i cant install cwm recovery with rom manager so i cant flash cyannogen again.i have found a apk (flipout system recovery)it goes me to recovery but it not working good
how i install the correct cwm recovery for intalling any roms i want?
Click to expand...
Click to collapse
If you want the recovery menu you need to install 2ndinit. http://goo.gl/5P89P
Open the app and install the recovery menu with it, then reboot (some say it is safer to reboot even two times). You get the blue LED after powering the phone on, you have to press volume down then. There you can get to the custom recovery and wipe data, cache, install zips from SD etc.

Arjoma said:
If you want the recovery menu you need to install 2ndinit. http://goo.gl/5P89P
Open the app and install the recovery menu with it, then reboot (some say it is safer to reboot even two times). You get the blue LED after powering the phone on, you have to press volume down then. There you can get to the custom recovery and wipe data, cache, install zips from SD etc.
Click to expand...
Click to collapse
yes it worked!
thank you very much my friend you where very helpfull!danken!!

alexanter the great said:
yes it worked!
thank you very much my friend you where very helpfull!danken!!
Click to expand...
Click to collapse
danken?

Arjoma said:
danken?
Click to expand...
Click to collapse
i dont now!thanks in german!

alexanter the great said:
i dont now!thanks in german!
Click to expand...
Click to collapse
Ah, I almost thought that you meant that It should rather be "Danke"
Ορίστε, κανένα πρόβλημα! ("You're welcome, no problem" in Greek?)

its:παρακαλω κανενα προβλημα!!
i translate it for be sure and it wrote me danken, and made me curious,but i was know it is danke!Danke any way my friend!!

[Q] Cant enter CWM recovery mode

Hi, im new here. I here to ask. I want to root my galaxy grand duos (jellybean 4.2.2 not 4.1.2), but after i flashing CWM with odin, it doesn't work. Odin say "0 failed/1 successfully". And i saw the PASS text and my grand is rebooted successfully. After that i try to enter CWM recovery mode by pressing "Vol Up + Power button + Home". It took me to recovery mode but not CWM. It took me to Regular Android Recovery. Please help me with this. I want root my phone.

Did your device really reboot? In my case I had to take out the battery after Odin flashed cwm...

that's exactly my problem too. i can't access cwm recovery mod. it goes to stock recovery instead. i was able to access cwm recovery mod once but i didn't have superuser on my sd card. it was on my pc. so i rebooted my phone and the next time i tried to access cwm recovery mod i was unable to do so. seriously need help!!

Samsung stock flashes stock recovery on boot if a custom recovery is present... usually in cwm a notification appears when you're about to boot from cwm to ROM, asking to fix the stock recovery reflashing...

mantan gm said:
Hi, im new here. I here to ask. I want to root my galaxy grand duos (jellybean 4.2.2 not 4.1.2), but after i flashing CWM with odin, it doesn't work. Odin say "0 failed/1 successfully". And i saw the PASS text and my grand is rebooted successfully. After that i try to enter CWM recovery mode by pressing "Vol Up + Power button + Home". It took me to recovery mode but not CWM. It took me to Regular Android Recovery. Please help me with this. I want root my phone.
Click to expand...
Click to collapse
sunj247 said:
that's exactly my problem too. i can't access cwm recovery mod. it goes to stock recovery instead. i was able to access cwm recovery mod once but i didn't have superuser on my sd card. it was on my pc. so i rebooted my phone and the next time i tried to access cwm recovery mod i was unable to do so. seriously need help!!
Click to expand...
Click to collapse
Check this : http://forum.xda-developers.com/showpost.php?p=47163830&postcount=42
It contains the cwm recovery and step by step instructions, after flashing recovery you need to flash Fix-Recovery.zip to give cwm proper permissions. Then your recovery wont revert to stock Samsung recovery on each boot

iceyhotguy said:
Check this : http://forum.xda-developers.com/showpost.php?p=47163830&postcount=42
It contains the cwm recovery and step by step instructions, after flashing recovery you need to flash Fix-Recovery.zip to give cwm proper permissions. Then your recovery wont revert to stock Samsung recovery on each boot
Click to expand...
Click to collapse
you the man. got me worried for some time.

iceyhotguy said:
Check this : http://forum.xda-developers.com/showpost.php?p=47163830&postcount=42
It contains the cwm recovery and step by step instructions, after flashing recovery you need to flash Fix-Recovery.zip to give cwm proper permissions. Then your recovery wont revert to stock Samsung recovery on each boot
Click to expand...
Click to collapse
Ok my first post on xda. But been here sine a last couple of months. Yes, the above steps work flawlessly in my galaxy grand without any hiccup.

sunj247 said:
you the man. got me worried for some time.
Click to expand...
Click to collapse
skpadhi79 said:
Ok my first post on xda. But been here sine a last couple of months. Yes, the above steps work flawlessly in my galaxy grand without any hiccup.
Click to expand...
Click to collapse
Glad I could help
@skpadhi79 Welcome to xda

thanks for the reply
Thanks for your reply. But still not working. I tried that 5× and still not working. I cant do anything. In normal recovery, i cant install Fix-recovery.zip or anything. I cant root my phone?.

Just follow step by step
1)connect your phone in download mode to pc/lap,make sure you have installed Samsung kies properly as odin will detect the drivers
2)check if the 'ID:COM' tab in odin is turned blue
3)now if its blue everything is fine and now with your phone connected,with 'ID:COM' tab in odin turned blue,select pda in odin and select cwm zip and untick auto reboot in odin.
4)then once u have selected cwm zip in pda and unticked auto-reboot hit START in odin.
5)after it says passed just unplug you phone and enter recovery manually by pressing VOL UP+POWER+HOME,now you should have cwm recovery
6)in cwm select install zip from sd card choose zip and select fix recovery.zip
7)after cwm says installation complete now again select install zip from sd card,choose zip from sd card and select update super su zip
8)FINALLY reboot system now and now you have a fully functional cwm recovery and have successfully completed rooting process:thumbup:
Sent from GT-I9505 using slimbean unofficial 20131115 the BEST rom

Fine
Sulaimanshariff said:
Just follow step by step
1)connect your phone in download mode to pc/lap,make sure you have installed Samsung kies properly as odin will detect the drivers
2)check if the 'ID:COM' tab in odin is turned blue
3)now if its blue everything is fine and now with your phone connected,with 'ID:COM' tab in odin turned blue,select pda in odin and select cwm zip and untick auto reboot in odin.
4)then once u have selected cwm zip in pda and unticked auto-reboot hit START in odin.
5)after it says passed just unplug you phone and enter recovery manually by pressing VOL UP+POWER+HOME,now you should have cwm recovery
6)in cwm select install zip from sd card choose zip and select fix recovery.zip
7)after cwm says installation complete now again select install zip from sd card,choose zip from sd card and select update super su zip
8)FINALLY reboot system now and now you have a fully functional cwm recovery and have successfully completed rooting process:thumbup:
Sent from GT-I9505 using slimbean unofficial 20131115 the BEST rom
Click to expand...
Click to collapse
Ok i will try this, thanks for your reply

answer
mantan gm said:
Hi, im new here. I here to ask. I want to root my galaxy grand duos (jellybean 4.2.2 not 4.1.2), but after i flashing CWM with odin, it doesn't work. Odin say "0 failed/1 successfully". And i saw the PASS text and my grand is rebooted successfully. After that i try to enter CWM recovery mode by pressing "Vol Up + Power button + Home". It took me to recovery mode but not CWM. It took me to Regular Android Recovery. Please help me with this. I want root my phone.
Click to expand...
Click to collapse
Hi i have got a samsung galaxy grand duos i9082L and i ´ve the same problem. I resolve that with an old cwm v. 6.0.4.5 it´s not touch, but its ok for root for example. It´s the only one cwm what really found and works very well.

reovery mode not
i have installed cwm recovery from twrp and now my grand i9082 is not booting into recovery mode
please tell me what to do

tanvirtech40 said:
i have installed cwm recovery from twrp and now my grand i9082 is not booting into recovery mode
please tell me what to do
Click to expand...
Click to collapse
Like iceyhotguy suggested, follow the instructions in the link he provided. Here.

Just Sharing
Well i had a same experienced with CWM acting like that on a Galaxy Grand, so i just share what i done to fix it.
The first i got my gadget, i let it update and all, and choose to Root it using CWM method.
at first it was goin well, Then i start going deeper by deleting stuff on system that i think i dont need like KNOX and others (Im acctually a NOOB do help me with what can i safely
deleted). what happen next when i restart my Phone, all stuck on the SAMSUNG Logo. so i redo the usual Flashing of Stock ROM n Reinstall the CWM. but its not working anymore.
The CWM like just gone from the Phone. after fiddling around, i realise when flashing CWM using ODIN3 v3.07. "i cant uncheck Auto-Reboot", i dont know why i cant, it just like
that. Luckly i still got my old backup of ODIN3 v1.85, in which i redo all the flashing and i can even uncheck the Auto-Reboot thing. Oh because the auto-reboot its
tick off in ODIN3 v1.85, after flashing, unplug ur phone and while in its download mode, press the button to straight away go to the recovery, if u reboot it all the
flash will not work. And Pooof all my problem fixed.
Got my Phone system back, CWM and Root working unlike before. Hope this Help people havin a same issue. sorry if i write somethin wrong since im a NOOB.
Press Thanks if needed

iceyhotguy said:
Check this : http://forum.xda-developers.com/showpost.php?p=47163830&postcount=42
It contains the cwm recovery and step by step instructions, after flashing recovery you need to flash Fix-Recovery.zip to give cwm proper permissions. Then your recovery wont revert to stock Samsung recovery on each boot
Click to expand...
Click to collapse
hi guys i got the same problems but i tried each and every link u guys posted but its still no help ........ when i press vl+ hme and lock it does restart and shows the blue sign that its loading in recovery for a second but then it goes on to download mode ...... help
---------- Post added at 08:53 AM ---------- Previous post was at 08:49 AM ----------
kai.verma said:
hi guys i got the same problems but i tried each and every link u guys posted but its still no help ........ when i press vl+ hme and lock it does restart and shows the blue sign that its loading in recovery for a second but then it goes on to download mode ...... help
Click to expand...
Click to collapse
I had rooted and installed cm12 before on my g2 but then i formated it to its orignal state and now this is happening ........ i did auto root it but now what to do
---------- Post added at 09:51 AM ---------- Previous post was at 08:53 AM ----------
my firmware G7102DDUBNK1

after downloading cwm recovery it is not showing
I rooted my galaxy grand and i want to install cwm recovery then installed chotu rar by odin first it is showing cwm recovery then another time when i get into cwm it is showing stock rom please help

Hey bro ur solution worked
Sulaimanshariff said:
Just follow step by step
1)connect your phone in download mode to pc/lap,make sure you have installed Samsung kies properly as odin will detect the drivers
2)check if the 'ID:COM' tab in odin is turned blue
3)now if its blue everything is fine and now with your phone connected,with 'ID:COM' tab in odin turned blue,select pda in odin and select cwm zip and untick auto reboot in odin.
4)then once u have selected cwm zip in pda and unticked auto-reboot hit START in odin.
5)after it says passed just unplug you phone and enter recovery manually by pressing VOL UP+POWER+HOME,now you should have cwm recovery
6)in cwm select install zip from sd card choose zip and select fix recovery.zip
7)after cwm says installation complete now again select install zip from sd card,choose zip from sd card and select update super su zip
8)FINALLY reboot system now and now you have a fully functional cwm recovery and have successfully completed rooting process:thumbup:
Sent from GT-I9505 using slimbean unofficial 20131115 the BEST rom
Click to expand...
Click to collapse
Bro tried to solve this problem since last two-three months finally u solved it.
The solution is only that untick autoreboot.
Thanks once again. And i love u.

if u just want to root your device install root genius on your pc and then connect your phone with usb . Before that just on usb debugging from developer's option.to activate developer's option click 10 times on bulid number in about phone.

i installed philz touch recovery using odin, when i rebooted into recovery i flashed a twrp recovery zip but the execution aborted....then i rebooted the device now i dont see anything...like there is no display... the mobile still works as when i enter download mode and press volume up it gets detected in odin and even i flashed the philz recovery again but still no display....plz help urgently

l coud't flash recovery some thing happen

Hi xda
I have N7100 android 4.1.2
and
1- I downloaded philZ recovery and odin
2- I flashed the recovery by odin
3- I saw pass
4- I put the phon into recovery mod I saw stock recovery :what:
where is the problm $?
please help me in this phon
I coud't updated also
............pleas.. my. ..freind......

Dawood Al Amri said:
Hi xda
I have N7100 android 4.1.2
and
1- I downloaded philZ recovery and odin
2- I flashed the recovery by odin
3- I saw pass
4- I put the phon into recovery mod I saw stock recovery :what:
where is the problm $?
please help me in this phon
I coud't updated also
............pleas.. my. ..freind......
Click to expand...
Click to collapse
Which partition did you use to flash it??
Try this method
Go to play store .. Then
download rom manager from clockwork mod
and follow the steps.. That should give you cwm. Now flash philz recovery zip using cwm..
or if you are rooted
download goo.im app
click on menu and tap on open source recovery .. it will give you a notification for twrp.. click on ok and it will download and flash it..

geekynoob said:
Which partition did you use to flash it??
Try this method
Go to play store .. Then
download rom manager from clockwork mod
and follow the steps.. That should give you cwm. Now flash philz recovery zip using cwm..
or if you are rooted
download goo.im app
click on menu and tap on open source recovery .. it will give you a notification for twrp.. click on ok and it will download and flash it..
Click to expand...
Click to collapse
I couldn't root my device because the same problem
also, l couldn't updata my phon to 4.3
:thumbdown: meybe some thing locked

Dawood Al Amri said:
I couldn't root my device because the same problem
also, l couldn't updata my phon to 4.3
:thumbdown: meybe some thing locked
Click to expand...
Click to collapse
you are doing something wrong...
4.1.2 should not have any issues with Philz recovery...
just flash the latest philz..using ODIN and use the pda tab to flash it..
use .tar file..!
if you still have issues rename the file.. remove .md5 and just make it .tar.. it works..!

Flash through phone if possible (not through recovery mode but from ROM toolbox or something.) It's more reliable.
Sent from a small country called Singapore.
Phone: N7105 powered by Illusion ROM 2.6
Kernel: Plasma v2.02
Click thanks if I helped!

geekynoob said:
you are doing something wrong...
4.1.2 should not have any issues with Philz recovery...
just flash the latest philz..using ODIN and use the pda tab to flash it..
use .tar file..!
if you still have issues rename the file.. remove .md5 and just make it .tar.. it works..!
Click to expand...
Click to collapse
I think that also
I will try to rename the from from md5.tar to .tar
I flash recovery, root and roms by odin for different devices I don't face this problem

I flash CWM into my device last time also had the same problem. Mine is N7105.
And I rooted + flashed CWM few of N7105 (belongs to my friends), also had the same problem.
But, I managed to succeed finally.
What I did was very simple. After ODIN pass, device will reboot.
When it reboot, don't let it pass the 1st screen. I mean by the time your device showing "Galaxy Note II bla bla bla", don't let it pass it into the 2nd screen.
Once it reboots, you have to as quickly as pressing vol up + power + home, in order to get into recovery, a.s.a.p.
after that, you can see that CWM is installed on your device instead of stock recovery.
Sent from the corner of this rounded earth.

antique_sonic said:
I flash CWM into my device last time also had the same problem. Mine is N7105.
And I rooted + flashed CWM few of N7105 (belongs to my friends), also had the same problem.
But, I managed to succeed finally.
What I did was very simple. After ODIN pass, device will reboot.
When it reboot, don't let it pass the 1st screen. I mean by the time your device showing "Galaxy Note II bla bla bla", don't let it pass it into the 2nd screen.
Once it reboots, you have to as quickly as pressing vol up + power + home, in order to get into recovery, a.s.a.p.
after that, you can see that CWM is installed on your device instead of stock recovery.
Sent from the corner of this rounded earth.
Click to expand...
Click to collapse
this metheod pass

what I do to flashed pass
1- I rename file from md5.tar to. tar
2- I flasded the file .tar by odin
3- I saw GALAXY NOTE 2 befor bootanimation I pressed (vom+ ,power bottem and home bottem) I saw philz recovery I'm happey
4- when I reboot device to recovery mod I saw stock recovery agan broplem

stock retrival not possible from Cyanogenmod 11 on Samsung Galaxy Grand duos

I own a Samsung Galaxy Grand duos GT - I9082, running on CM 11, PHILZ 6.0.4.5 Recovery, I used Solo launcher as default, now its not getting out of it,My concern is now I am not able to go to stock, I have tried flashing JB 4.1.2 tar.md5 file thru odin 3.07, One thing I am noticing while flashing in odin is it says not responding until the file appears in the pda box, after that every thing works fine, pass msg comes on the screen, but after that it re-boots to the same CM 11, I have also tried doing factory reset, cache & dalvik cache wipe after the flashing, but it never comes back to stock. I am even trying to flash the selinux support recovery, but the same thing happens, after odin pass msg, if i check the recovery its the same PHILZ 6.0.4.5 Recovery. I am really worried that has my phone been bricked.
I have even tried doing format/system, factory reset, cache & Dalvik wipe. usb debugging is selected in the developer section. Can i get the original stock flashed from the samsung ? pls help asap, thank you.

Strange. Have you tried flashing stock 4.2.2?

naufalhadyan said:
Strange. Have you tried flashing stock 4.2.2?
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------------------------------------------------------
yeah but in vain, same prob exists ?

nandaleo72 said:
---------------------------------------------------------------------------------------------------------------------------------------
yeah but in vain, same prob exists ?
Click to expand...
Click to collapse
If you still can't get to stock it means Odin hasn't even downloaded the firmware into the device. Could be hardware problem (check your USB cable) driver installation (make sure you installed the drivers correctly) or you simply didn't follow the correct procedure.
http://forum.xda-developers.com/showthread.php?t=2616816
Btw, it helps if you manage to post a screenshot of what's written in Odin's log box and post it here...

cm
naufalhadyan said:
If you still can't get to stock it means Odin hasn't even downloaded the firmware into the device. Could be hardware problem (check your USB cable) driver installation (make sure you installed the drivers correctly) or you simply didn't follow the correct procedure.
http://forum.xda-developers.com/showthread.php?t=2616816
Btw, it helps if you manage to post a screenshot of what's written in Odin's log box and post it here...
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
png attached, I also wld like to add that in my download mode, it says current bin as custom & system status as official, whereas I am on CM 11

nandaleo72 said:
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
png attached, I also wld like to add that in my download mode, it says current bin as custom & system status as official, whereas I am on CM 11
Click to expand...
Click to collapse
Now that is really weird... :/ I don't know how to solve it, sorry. Looking at Odin's logs, it's supposed to flash correctly. Maybe someone more knowledgable than me can help?

cm
naufalhadyan said:
Now that is really weird... :/ I don't know how to solve it, sorry. Looking at Odin's logs, it's supposed to flash correctly. Maybe someone more knowledgable than me can help?
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
can u tell me how can i post the same to pawitp

I can suggest one thing only
Format /system and /data first from Philz and then try flashing it
Sent from my GT-I9082 using Tapatalk

CM 11
akiratoriyama said:
I can suggest one thing only
Format /system and /data first from Philz and then try flashing it
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------
I have done that also, first format sys/data & cache wipe via philz, and flashed ,same result, the strangest part is its not even accepting zipping of the delta's of CM 11 by pawitp., pls help or else need to go to the service centre samsung 2morrow

nandaleo72 said:
------------------------------------------------------------------------------------------------------------------------------
I have done that also, first format sys/data & cache wipe via philz, and flashed ,same result, the strangest part is its not even accepting zipping of the delta's of CM 11 by pawitp., pls help or else need to go to the service centre samsung 2morrow
Click to expand...
Click to collapse
I have never ever seen such strange problem in the 1.5 yrs of my XDA years
Something is telling me that the system partition is not writable (hence not accepting delta file?)
Can you try to copy a file to /system partition ?
I think you may need to flash a .PIT file
@k2wl @iceyhotguy kindly provide your suggestions
Sent from my GT-I9082 using Tapatalk

I am finding one prob while doing factory reset, it says E : unknown volume for path [ sd-ext], what does this suggest ?

nandaleo72 said:
I own a Samsung Galaxy Grand duos GT - I9082, running on CM 11, PHILZ 6.0.4.5 Recovery, I used Solo launcher as default, now its not getting out of it,My concern is now I am not able to go to stock, I have tried flashing JB 4.1.2 tar.md5 file thru odin 3.07, One thing I am noticing while flashing in odin is it says not responding until the file appears in the pda box, after that every thing works fine, pass msg comes on the screen, but after that it re-boots to the same CM 11, I have also tried doing factory reset, cache & dalvik cache wipe after the flashing, but it never comes back to stock. I am even trying to flash the selinux support recovery, but the same thing happens, after odin pass msg, if i check the recovery its the same PHILZ 6.0.4.5 Recovery. I am really worried that has my phone been bricked.
I have even tried doing format/system, factory reset, cache & Dalvik wipe. usb debugging is selected in the developer section. Can i get the original stock flashed from the samsung ? pls help asap, thank you.
Click to expand...
Click to collapse
nandaleo72 said:
I am finding one prob while doing factory reset, it says E : unknown volume for path [ sd-ext], what does this suggest ?
Click to expand...
Click to collapse
The delay in Odin, or the stopped responding moment, like you mentioned is from the md5 check Odin performs to make sure the firmware is valid. And the sd-ext partition is something that isn't used anymore since JB, nothing to worry about we all get that warning when we wipe in recovery.
Sadly, it's hard to tell what could be wrong, or what you could be doing wrong, just from the problem. But the main thing is, phone is always recoverable, just make sure your data is safely backed up on your computer.
If you haven't already taken your phone into the service center, can you list each and every step you are taking to revert to stock? And I do mean, each step, even boot into recovery, boot into download mode, flashed this recovery/firmware etc, more the details, the better. This way me or other members can analyze more accurately what could be the possible problem.

where can i find this .pit file it's of cm 11 or.........?

It's always better practice to have a recovery before trying things that may ruin your precious time.......
Look for stock files for your smartphone galaxy grand ..... Put files sometimes comes within that file or you have to find it manually by googling...... ?????
Sent from my Nexus 7 using XDA Premium HD app

CM 11
can u suggest any of the knowledgable senior member to solve this problem, bcoz I luv my SGG.

Thank u so much for the concern shown. I have regularly been switching b/w roms [ stock & custom ], my favorites are cm & carbon, i have used recoveries of chotu CWM-TOUCH & Philz touch both ver. 5.15 & cwm - selinux support, now i am on 6.0.4.5. I am running CM 11 now. launcher is solo kikat. I have done nandroid backup of all Roms, I have tried the restore option from clockwokmod / backups, not working out. I am using the following procedure to revert to stock :
1. check debug mode in developer mode
2. to the download mode by pressing volume key downwards & power key & home button at same time wait for the logo to appear, Followed by ODIN Mode, & then press the vol button upwards.
3. open odin, i have a version of 3.07, check only Auto Reboot & F. Reset Time, nothing else, clicking on the PDA, selecting the 4.1.2 I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 file, and pressing start.
4. normally doing a factory reset & cache wipe & re-boot.
hope, i am following the procedure properly, not yet given the handset to samsung service, pls help me out, thnk u once again, pls reply asap.

CM 11
iceyhotguy said:
The delay in Odin, or the stopped responding moment, like you mentioned is from the md5 check Odin performs to make sure the firmware is valid. And the sd-ext partition is something that isn't used anymore since JB, nothing to worry about we all get that warning when we wipe in recovery.
Sadly, it's hard to tell what could be wrong, or what you could be doing wrong, just from the problem. But the main thing is, phone is always recoverable, just make sure your data is safely backed up on your computer.
If you haven't already taken your phone into the service center, can you list each and every step you are taking to revert to stock? And I do mean, each step, even boot into recovery, boot into download mode, flashed this recovery/firmware etc, more the details, the better. This way me or other members can analyze more accurately what could be the possible problem.
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Thank u so much for the concern shown. I have regularly been switching b/w roms [ stock & custom ], my favorites are cm & carbon, i have used recoveries of chotu CWM-TOUCH & Philz touch both ver. 5.15 & cwm - selinux support, now i am on 6.0.4.5. I am running CM 11 now. launcher is solo kikat. I have done nandroid backup of all Roms, I have tried the restore option from clockwokmod / backups, not working out. I am using the following procedure to revert to stock :
1. check debug mode in developer mode
2. to the download mode by pressing volume key downwards & power key & home button at same time wait for the logo to appear, Followed by ODIN Mode, & then press the vol button upwards.
3. open odin, i have a version of 3.07, check only Auto Reboot & F. Reset Time, nothing else, clicking on the PDA, selecting the 4.1.2 I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 file, and pressing start.
4. normally doing a factory reset & cache wipe & re-boot.
I am also finding that when I try to install any zip from sdcard1 thats my expandable memory slot in philz touch 6.0.4.5 it says E: can't open/storage/sdcard1/cm-10.1-20130412-unofficial-i9082.zip (bad) installation aborted any reasons & also png attached, I also wld like to add that in my download mode, it says current bin as custom & system status as official, whereas I am on CM 11
hope, i am following the procedure properly, not yet given the handset to samsung service, pls help me out, thnk u once again, pls reply asap.

I have made a thread on how to unroot and revert to stock. You can find it here: http://forum.xda-developers.com/showthread.php?t=2639894 . hope this piece of information helps you...

nandaleo72 said:
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Thank u so much for the concern shown. I have regularly been switching b/w roms [ stock & custom ], my favorites are cm & carbon, i have used recoveries of chotu CWM-TOUCH & Philz touch both ver. 5.15 & cwm - selinux support, now i am on 6.0.4.5. I am running CM 11 now. launcher is solo kikat. I have done nandroid backup of all Roms, I have tried the restore option from clockwokmod / backups, not working out. I am using the following procedure to revert to stock :
1. check debug mode in developer mode
2. to the download mode by pressing volume key downwards & power key & home button at same time wait for the logo to appear, Followed by ODIN Mode, & then press the vol button upwards.
3. open odin, i have a version of 3.07, check only Auto Reboot & F. Reset Time, nothing else, clicking on the PDA, selecting the 4.1.2 I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 file, and pressing start.
4. normally doing a factory reset & cache wipe & re-boot.
I am also finding that when I try to install any zip from sdcard1 thats my expandable memory slot in philz touch 6.0.4.5 it says E: can't open/storage/sdcard1/cm-10.1-20130412-unofficial-i9082.zip (bad) installation aborted any reasons & also png attached, I also wld like to add that in my download mode, it says current bin as custom & system status as official, whereas I am on CM 11
hope, i am following the procedure properly, not yet given the handset to samsung service, pls help me out, thnk u once again, pls reply asap.
Click to expand...
Click to collapse
I was curious if this problem wasn't with what you were doing but with kitkat ROMs, so I looked through XDA and found people having similar issues. Apparently downgrading to JB from KitKat CM is an issue for a lot of users with Samsung phones.
Try this,
1.Go to your recovery, Wipe data/cache and dalvik cache. Format /system under Mounts and Storage.
2. Download and flash a 4.2.2 based stock based ROM (like GENNXT or any you want), this would bring you back on 4.2.2 kernel and stuff, so let it boot up completely.
3. Just to be sure, flash 4.2.2 based recovery with Odin from here - http://forum.xda-developers.com/showthread.php?t=2315529
I honestly don't think recovery should make any difference, but I noticed a thread where the user said it was so just be sure. Then reboot back into recovery, and wipe data/cache and dalvik.
4. Go to download mode, use Odin to flash your 4.1.2 firmware, after it passes, boot into recovery (it should be stock recovery now), clear data and cache and reboot.
I think the problem is arising from all the new SE Linux support in KitKat, so a gradual downgrade should work. You can add a step of flashing 4.2.2 firmware after booting up stock based ROM but shouldn't be needed.
Let me know how it goes.

not working out ?

My phone dosen't start up only show SAMSUNG and Sensor blue screen light up??

Hello friend please help me i am in big trouble.
I have Samsung Galaxy Note2 N7100. And first time i have rooted my device viewing youtube tutorial and all are fine, going perfect, and got root on my device. After then second time i am goint to install custome ROM Dr.Ketan and i have downlod it form this froum "N7100_ND3_DrKetan_Custom_ROM_V8" 1.53GB zip file and copyed it on my device external card. And also in the tutorial of "how to install Dr.Ketan vedio" says first of all install philz_touch so i have download "philz_touch_6.02.1-n7100.tar.md5 7.65MB file and going to install it on my device but in this time Odin3 v3.09 doesen't detect my device first time was fine and success to root my device but this time doesn't show up so i have leve it. And go to directly install Dr.Ketan without installing philz_touch. So i am going go to directly on recovery mode by pressing simulteneously power+home+volume up button. And it start on CWM-based recovery V6.0.1.4 mode. First of all i hve back up my phone on external SD card and then go to proceed. First step i have do wipe data/factory reset then second step wipe cache partition and third step i have go to advanced and wipe dalvik cache and finally i have go install Dr.Ketan from install zip from sdcard and then choose Dr.Ketan and it start i have choose all the option and install it fine. Then go to reboot my systm and it reboot first of all show up Samsung GALAXY Note II GT-N7100 and then secod time show SAMSUNG in the middle of screen and also sencor blue light up and i have keep it much then half and our but my phone is not open. So friend it my problems.
After then finally againg go to same procedure but this time i have choose back up and restore and restore it form my agenest back up to SD card all are fine and says restore complete now again i have go to reboot my system this time doesen't reboot automatically i have choose reboot after then same problems.............. dosen't start.
Finally what is wrong with me please help me friend.​

Ravanraj said:
Hello friend please help me i am in big trouble.
I have Samsung Galaxy Note2 N7100. And first time i have rooted my device viewing youtube tutorial and all are fine, going perfect, and got root on my device. After then second time i am goint to install custome ROM Dr.Ketan and i have downlod it form this froum "N7100_ND3_DrKetan_Custom_ROM_V8" 1.53GB zip file and copyed it on my device external card. And also in the tutorial of "how to install Dr.Ketan vedio" says first of all install philz_touch so i have download "philz_touch_6.02.1-n7100.tar.md5 7.65MB file and going to install it on my device but in this time Odin3 v3.09 doesen't detect my device first time was fine and success to root my device but this time doesn't show up so i have leve it. And go to directly install Dr.Ketan without installing philz_touch. So i am going go to directly on recovery mode by pressing simulteneously power+home+volume up button. And it start on CWM-based recovery V6.0.1.4 mode. First of all i hve back up my phone on external SD card and then go to proceed. First step i have do wipe data/factory reset then second step wipe cache partition and third step i have go to advanced and wipe dalvik cache and finally i have go install Dr.Ketan from install zip from sdcard and then choose Dr.Ketan and it start i have choose all the option and install it fine. Then go to reboot my systm and it reboot first of all show up Samsung GALAXY Note II GT-N7100 and then secod time show SAMSUNG in the middle of screen and also sencor blue light up and i have keep it much then half and our but my phone is not open. So friend it my problems.
After then finally againg go to same procedure but this time i have choose back up and restore and restore it form my agenest back up to SD card all are fine and says restore complete now again i have go to reboot my system this time doesen't reboot automatically i have choose reboot after then same problems.............. dosen't start.
Finally what is wrong with me please help me friend.​
Click to expand...
Click to collapse
Problem is the right recovery,it seems you have the default recovery CWM.You need to flash philz touch via odin for the first time to get a custom recovery on your device ,later you can switch between philz recovery and twrp recovery by flashing their respective zip files from either of the recoveries.So first get your phone to be detected by odin and download the latest philz tar.md5 file from http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.41.6-n7100.tar.md5 uncheck auto reboot in odin and then hit start let it finish flashing once it says pass on odin unplug the usb cable from the laptop.pull your phone's battery out.put it back in after sometime then go into recovery manually you'll see your newly flashed philz recovery.Then do the correct wipes such as wipe cache and dalvik and clean to install a new rom which will factory reset your phone.Then proceed to flash dr ketan's ROM from external sd card.

Thank you sir
Ok sir thank you very much i have done. and another my question is what is the different between N7100_ND3_DrKetan_Custom_ROM_V8 and omni-4.4.4-20140621-n7100-NIGHTLY.
Dr. ketan is a part of omni? am i right sir? And also my question is i can install Dr.ketan and omni in same time in a same device??????

Ravanraj said:
Ok sir thank you very much i have done. and another my question is what is the different between N7100_ND3_DrKetan_Custom_ROM_V8 and omni-4.4.4-20140621-n7100-NIGHTLY.
Dr. ketan is a part of omni? am i right sir? And also my question is i can install Dr.ketan and omni in same time in a same device??????
Click to expand...
Click to collapse
No both are different ROM.Dr ketan's ROM is based on Touchwiz samsung based while OMNI rom are based on AOSP which are like the ROM run on Nexus devices.Well if you flash 4.3 ROM there's devil kernel which allows dual booting that means one can have Two separate ROMs on their device,4.4.2 Kernels don't support it yet.
Edit: Don't call me "sir",call me Pratik.

Thanks
Ok Pratik
And another question is which ROM is the best for my Note 2 N7100.

Ravanraj said:
Ok Pratik
And another question is which ROM is the best for my Note 2 N7100.
Click to expand...
Click to collapse
All ROMS are best ROM for N7100 ,no one will answer you which is the best ROM cause everyone uses their phone differently so what i may like doesn't mean you'd like it too.So try few custom roms for few days each and then stick to the one that suits you best.Also while responding to me click on "quote message in reply?" so i get notified that you have replied to me cause i might not check this thread often to see if you need any further help if you don't quote my post.Good luck