My i747 S III died. :crying:
After the update via odin for 4.3 Jelly Bean appeared he re-started the doll android, hung up and did not care anymore.
When I connect it to the PC windows makes an alarm connected device, but my s3 does not care.
Is there any way to revive my phone? I thank
What did you flash? There is no 4.3 update for the i747 via Odin that I know of. There is a 4.3 ROM that can be flashed from XDA.
audit13 said:
What did you flash? There is no 4.3 update for the i747 via Odin that I know of. There is a 4.3 ROM that can be flashed from XDA.
Click to expand...
Click to collapse
I used this link http://www.androidayos.com/samsung-galaxy-s3-stock-firmware/
I don't know who compiled that ROM. As far as I know, the official ROMs are on sammobile.com and there is no 4.3 ROM for the ATT i747.
Are you sure you have the i747 and not i747m?
yes is i747
Can you get into download mode at all? Did the ROM flash successfully according to Odin?
Appeared in odin successfully operating
When I put the phone on the PC in the devices area of error with this driver: qualcomm hs-usb qdloader 9008
Can you get into download or recovery mode?
No No.'s Phone will not turn on.
Sorry my bad english
Your English is fine. You should try this: http://forum.xda-developers.com/showthread.php?t=2549068
If it doesn't work, you may have to have it sent for repair.
Related
I was trying to flash my s3 back to 4.1.1. It failed when I was using odin. Now, I get the message Firmware encountered an issue..
I downloaded kies 3 but my phone will not connect to it.
Iv tried many different things and odin keeps failing after a couple lines.
What can I do?
b_rad_1983 said:
I was trying to flash my s3 back to 4.1.1. It failed when I was using odin. Now, I get the message Firmware encountered an issue..
I downloaded kies 3 but my phone will not connect to it.
Iv tried many different things and odin keeps failing after a couple lines.
What can I do?
Click to expand...
Click to collapse
Does your phone still boot? or do you have a Brick?
If it still boots Leave it alone. you can flash any rom you want to as long as there is no bootloader in it.
If you already bricked it, is it a soft brick or hard brick?
theramsey3 said:
Does your phone still boot? or do you have a Brick?
If it still boots Leave it alone. you can flash any rom you want to as long as there is no bootloader in it.
If you already bricked it, is it a soft brick or hard brick?
Click to expand...
Click to collapse
When I insert the battery and power on it has a message saying " firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
above that in the top left it says
odin mode
product name :sgh-1747m
custom binary download: yes (1count)
current binary: samsung official
system status: official
qualcomm secure boot: enable
warranty bit: 0
bootloader rp swrev: 1
This is all it does. I can get into download mode. But everytime I try to flash it says failed.
This is 4.3 touchwiz? or 4.3 custom rom?
If custom, I encountered a similar issue where going back to Odin failed. Trying to turn on the phone and going into recovery mode let "Firmware encountered and issue". I had also encountered the problem of Kies not connecting. It would say "connecting" but nothing would happen.
Can your phone boot in download mode?
If yes, you should be able to recover the firmware with Kies.
You may need to use the previous version of Kies and not Kies 3, as I think Kies 3 is only for 4.3 android touchwiz versions. If you had touchwiz 4.3 from the OTA, you may be stuck as I think people have had problems trying to go back to 4.1.
In Kies go in Firmware Upgrade and Initialisation. You will need to know your phone's model and serial number. They can be found behind the battery.
Follow the steps and you should be able to go back to 4.1.1.
chemicalseb said:
This is 4.3 touchwiz? or 4.3 custom rom?
If custom, I encountered a similar issue where going back to Odin failed. Trying to turn on the phone and going into recovery mode let "Firmware encountered and issue". I had also encountered the problem of Kies not connecting. It would say "connecting" but nothing would happen.
Can your phone boot in download mode?
If yes, you should be able to recover the firmware with Kies.
You may need to use the previous version of Kies and not Kies 3, as I think Kies 3 is only for 4.3 android touchwiz versions. If you had touchwiz 4.3 from the OTA, you may be stuck as I think people have had problems trying to go back to 4.1.
In Kies go in Firmware Upgrade and Initialisation. You will need to know your phone's model and serial number. They can be found behind the battery.
Follow the steps and you should be able to go back to 4.1.1.
Click to expand...
Click to collapse
Its 4.3 touchwiz ota last week.
I will try kies instead of kies 3. With kies 3 it just says connecting, wont connect. When I do the Firmware Upgrade and Initialisation. I type in my model and it just closes.
Im downloading kies right now...
Oh also, I had encountered the closing problem when in Windows.
I was able to not have the random closing problem when using Kies on a Mac.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
b_rad_1983 said:
Its 4.3 touchwiz ota last week.
I will try kies instead of kies 3. With kies 3 it just says connecting, wont connect. When I do the Firmware Upgrade and Initialisation. I type in my model and it just closes.
Im downloading kies right now...
Click to expand...
Click to collapse
Kies has be installed and when I click on tools- Firmware Upgrade...
I type in the model and it says "Please check the model name and enter it". I click ok and it goes back to the main screen, nothing happens.
when i open kies and plug in the phone it says "connecting".... 5mins has passed..same thing..
Hm, yeah it's odd.
I had the same issue with the main screen saying connecting forever, which didn't matter for upgrading the firmware.
Do you have the att version?
I'm assuming you put SGH-I747 for model?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
My fix
I'm not an expert but I had the same problem due to the 4.3 release. You can't go back to an earlier release because the new boot loader is
locked. Nothing worked until I googled and located the exact .pit file and flashed it in Odin. I was rather desperate by then as I had a two day old
phone, lol. Kies doesn't have the newer release so I don't think you can use it. I used cwm mod recovery and flashed to a rooted stock 4.3 rom.
Hope this helps or someone can help more.
chemicalseb said:
Hm, yeah it's odd.
I had the same issue with the main screen saying connecting forever, which didn't matter for upgrading the firmware.
Do you have the att version?
I'm assuming you put SGH-I747 for model?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Rogers
SGH-I747M
Im currently looking for the stock 4.3 rogers file
I cant find what I need as im not 100% sure what im looking for..
im currently downloading
SGH-I747M_RWC_I747MVLDMF1_I747MOYADMF1_Original.zip
b_rad_1983 said:
I cant find what I need as im not 100% sure what im looking for..
im currently downloading
SGH-I747M_RWC_I747MVLDMF1_I747MOYADMF1_Original.zip
Click to expand...
Click to collapse
I reached the download limit..cant download it
Which Odin are you using? If you arent using it try Odin 3.09.
theramsey3 said:
Which Odin are you using? If you arent using it try Odin 3.09.
Click to expand...
Click to collapse
3.07 is what i used.
b_rad_1983 said:
3.07 is what i used.
Click to expand...
Click to collapse
I just thought about it you have to go back with the 4.3 because if you do succesfully flash anything older you will Hard brick your phone, right now you should be able to recover with the 4.3 odin file.
theramsey3 said:
I just thought about it you have to go back with the 4.3 because if you do succesfully flash anything older you will Hard brick your phone, right now you should be able to recover with the 4.3 odin file.
Click to expand...
Click to collapse
Where can i get the 4.3 odin file?
Check sammobile.com
b_rad_1983 said:
Where can i get the 4.3 odin file?
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/
You have to register for their site to be able to download. in the search bar about 1/3 page down on right type in SGH-I747M then find your carrier and download the appropriate file.
After that if you still dont like 4.3 you can flash whatever rom you want in CWM or TWRP or atleast thats whats been rumored. I have no clue I like 4.3 and havent had any issues with the rom I had a hard brick that I caused and recovered.
So I was trying to root my Galaxy S3 and for some reason it failed and my phone reboots to a screen that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies". But I tried Kies and it wont recognize my phone. My phone had android 4.3 on it. I also tried using a 4.1.2 stock rom on odin and I get an error saying "sw rev check fail" on my phone and the flash fails. Please help me im desperate at this point.
If you had 4.3 OTA and tried to flash 4.1.2 its a good possibility that you bricked your device. Can you get into download mode? If so try to flash the 4.3 tar file in Odin. Good luck
Edit...
http://forum.xda-developers.com/showthread.php?t=2565972
http://i.imgur.com/qrByUGN.jpg
yes i can get in download mode
bigpappags3 said:
If you had 4.3 OTA and tried to flash 4.1.2 its a good possibility that you bricked your device. Can you get into download mode? If so try to flash the 4.3 tar file in Odin. Good luck
Edit...
http://forum.xda-developers.com/showthread.php?t=2565972
http://i.imgur.com/qrByUGN.jpg
Click to expand...
Click to collapse
if I can get into download mod is it fixeable..I did the same thing as the poster above
flashed my daughter s2 1747m telus with what i thought was 4.3 for telus, sadly it was 4.3 telcel mexico any ideas on how to recover
If you are able to access download mode, you could flash stock by ODIN.
codemonkey98 said:
If you are able to access download mode, you could flash stock by ODIN.
Click to expand...
Click to collapse
sorry bout that it is a s3 1747m. tried to redflash 4.3 telus but always fail
I have a Galaxy S3 AT&T i747 Variant, and it is hard bricked, can't even turn on.
if I am able to get my phone Unbricked and into download mode, what will I do from there?
I have the 4.3 Bootloader I believe.
I know there isn't any odin fw for this right now, but my question is can I use T-Mobiles 4.3 Odin file?
At least to re-root, and install CWM, and reinstall my bootloader & Correct rom?
Or will this just not work at all....?
Thanks, sorry for the annoying questions lol.
If you can get into download mode, you could try and install a custom recovery to install a custom ROM.
I don't recommend flashing a T-Mobile ROM because the hardware isn't the same.
lemonboi5 said:
I have a Galaxy S3 AT&T i747 Variant, and it is hard bricked, can't even turn on.
if I am able to get my phone Unbricked and into download mode, what will I do from there?
I have the 4.3 Bootloader I believe.
I know there isn't any odin fw for this right now, but my question is can I use T-Mobiles 4.3 Odin file?
At least to re-root, and install CWM, and reinstall my bootloader & Correct rom?
Or will this just not work at all....?
Thanks, sorry for the annoying questions lol.
Click to expand...
Click to collapse
If you use the T-Mobile Odin files you will absolutely need a jtag. You cannot flash bootloader for a different variant it equals jtag.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
lemonboi5 said:
I have a Galaxy S3 AT&T i747 Variant, and it is hard bricked, can't even turn on.
if I am able to get my phone Unbricked and into download mode, what will I do from there?
I have the 4.3 Bootloader I believe.
I know there isn't any odin fw for this right now, but my question is can I use T-Mobiles 4.3 Odin file?
At least to re-root, and install CWM, and reinstall my bootloader & Correct rom?
Or will this just not work at all....?
Thanks, sorry for the annoying questions lol.
Click to expand...
Click to collapse
Hey, check out this post, its for T-MOBILE but if you get the requirements for the I747 and not the T999, this should work. Only way to do it without a Jtag, and that may not even work.
http://forum.xda-developers.com/showthread.php?t=2439367
Ive never done this or anything. I was just wondering because TMO has 4.3 odin files but nooooooo not AT&T
Thanks for all the replies, Ive tried every last debrick image at least 8 times, Im sending it off Thursday for a JTAG
So i bought a samsung galaxy s3 SGH-I747 here in milan. i unlocked it. and didn't realize it was rooted, so i try to unroot it using this method
-----------------> /watch?v=djcq5Wgf9zo[/url]
i did it but, it wont read my simcard, the IMEI in null/null, the camera was all dark, and all different kind of problem acured, by the way, it was running android 4.0.4 ... so i though if i root it again the problem will go away. but it didn't. so i tried to intall kitkat 4.4.2 and g'app. i used this method -------------------------> watch?v=V8mEcfJcxy8[/url]
when i was trying to install the kitkat, it say it faild and aborted i guess, but i was dumb so i install the g'app and it was succesfull, then i install the kitkat rom but still faild. so i delete the partition, and format and reset. then i rebooted it, but everytime i turned it on, either it goes to the recovery mood, or its stock on samsung logo. and now i dont know what to do ??? please help..
i tried downloading the stock firmware and using odin to flash it, but it always fail, i dont know why. i tried installing samsung keis but it wont recognize my phone please help........
Is your phone the i747 or i747m? What firmware did you try to flash using Odin?
audit13 said:
Is your phone the i747 or i747m? What firmware did you try to flash using Odin?
Click to expand...
Click to collapse
i have the sgh-i747 at&t usa version, i used the 4.1 from sammobile updates