Hello,
Im buying allshare cast dongle and it didn't work when I tried to connect and by searching I found many threads talking about this problem and that I should flash the stock rom to make it work but all of them posted at the past year. I tried to reset the counter and it's fixed to "1"
I wounder if there is recent solutions for this problem that don't include flashing the stock rom?
If so, is there any custom rom with stock recovery and kernel (or simillar to the stock rom) and working fine with the dongle ?
Update: I just found a video that says that he flashed a custom rom with stock kernel which worked fine with him but I tried to find stock kernel alone and I couldn't find it :/
Current device information:
Model: SGH-I317
Rom: Jedi x19
Kernel: Saber 44.6
Recovery: twrp-2.4.4.0
Thanks in advance
Related
Hi, I recently installed Racing Bean 2.0.1 with Fusion 4.0 kernel and flashed the Modules.zip I found in the Fusion 4.0.zip on my ARC S
The wifi isn't working, than i tried many times to wipe everything and flash again, with no benefits, the wifi still doesn't work
Same thing after flashing Fusion 4.3 and relative modules!
I used the search but I didn't find anything about this specific problem so I hope someone can help me :good:
Thanks
Well,I didnt have this issue and it shouldn't normally happen,but u can try leaving your wifi on and flashing the modules again(after flashing your rom that is).READ mechmetal's thread on wifi not working(the second post)..i can't help you if this doesnt work
Hey guys. So, I've been reading and reading and flashing and everything.
Got an S4. It was running 4.3 and I was having Wifi issues.
I had read it was a software issue and welp, I've always liked Cyanogen Mod so I installed that.
It installed the nightly build which was WAY too buggy (I use my camera a lot and it kept failing) edit: but the WiFi worked perfectly!
I got back to 4.2.2 now but now the WiFi is Totally not working now and i'm getting that message about
Kernel is not Seandroid enforcing
set warranty bit : kernel
and it takes forever to reboot.
Since I was on 4.3 do i need to flash that stock rom to get my stock kernel back?
Or can I install deoxed version??
I still need to put custom recovery too!
I know this is a lot of questions and i'm not much of a n00b.
Any help would be greatly appreciated.
Thanks in advance.
re: wifi not working
djphooka said:
Hey guys. So, I've been reading and reading and flashing and everything.
Got an S4. It was running 4.3 and I was having Wifi issues.
I had read it was a software issue and welp, I've always liked Cyanogen Mod so I installed that.
It installed the nightly build which was WAY too buggy (I use my camera a lot and it kept failing) edit: but the WiFi worked perfectly!
I got back to 4.2.2 now but now the WiFi is Totally not working now and i'm getting that message about
Kernel is not Seandroid enforcing
set warranty bit : kernel
and it takes forever to reboot.
Since I was on 4.3 do i need to flash that stock rom to get my stock kernel back?
Or can I install deoxed version??
I still need to put custom recovery too!
I know this is a lot of questions and i'm not much of a n00b.
Any help would be greatly appreciated.
Thanks in advance.
Click to expand...
Click to collapse
If you are using any Cyanogen/AOSP/AOKP/GE/KiKat roms then please ignore the following.
If you are using a M919 Tmobile Samsung S4 Jellybean Touchwiz 4.2.2 based rom then here is
the way to fix your wifi issue.
Here is the download link for Ktoonsez's custom kernel:
http://ktoonsez.jonathanjsimon.com/sgs4/TW/KT-SGS4-JB4.2-TW-TMO-12.12.2013.zip
Download it and flash it using cwm/twrp recovery and the wifi will work for you again.
Good luck!
I'm running the stock rom but it seems like somehow it didn't overwrite the Cyanogen kernel.
re: kernel
djphooka said:
I'm running the stock rom but it seems like somehow it didn't overwrite the Cyanogen kernel.
Click to expand...
Click to collapse
That means that this kernel is for you..... "IF you are really running the stock rom".
If your rom was REALLY stock, I mean if you "ODIN" flashed the stock rom using the
official Samsung M919 4.2.2 Jellybean Touchwiz firmware from http://SamMobile.com
or other sources then whatever kernel you had the stock rom would have over-written it.
If you are sure that it's not over written that means that you have NOT ODIN flashed the
official 4.2.2 M919 MDL firmware.
Good luck!
Hello All, I am running CM11 which has no MHL / HDMI support, so I cannot find a way to connect phone to TV. I understand there are many threads that touch on this, but I cannot find a solid answer.
What I would like to do is find a similar ROM that supports the MHL/HDMI.. or just flash back to stock.. can someone explain what I need to do or point me to the correct thread.. I cant seem to find it. (have searched a lot)
I have:
SG3 - SGH-I747 - Rogers
Running CM11 Nightly (11-20140204)
Android 4.4.2
Rooted
CWM - 6.0.4.3.
Please help !
Thank you.
Have you ever installed a 4.3 stock ROM on your phone? If not, you could flash a stock ROM from samfirmware.
Rom is developed by a Chinese developer and all credit goes to him and i personally very thank full to him.
And like to many Thanks to the Developer of Echoe Roms, only his developed kernel works very fine for my M919 with MIUI ROM
I got this Rom from official MIUI website, as Galaxy S4 I9505 custom roms can be flash on S4 M919 Tmobile version but all we need to look for Kernel to boot the rom and work flawlessly, so i have flashed this rom which is generated for I9505 on my Galaxy S4 Tmobile M919 but few issues were there from which wifi was not working so spending time on net and look for kernel and flashed few but could not get working one and then finally got one which works like charm. Rom is totally in English after Selecting English language for first boot
I am using this rom from one week and almost every thing works
Calling
Bluetooth
SMS
Camera
NFC
Wifi
Wifi Direct
GPS
and i am pretty sure others must be too
I love MIUI and i was happy to get MIUI for my M919 so like to share this rom who love to have MIUI on there Android devices
Flashing Method
Flashing method is same like we use to flash every rom, only after flashing rom do not reboot, flash Kernel first and then reboot.
I am using TWRP v2.7.1.0 and others recoveries will work too
I have change my model number in my Build.prop file, because it will show I9505 and you guys can do it too, just google it, it easy
Download
ROM
http://miuirom.xiaomi.com/rom/u3472249/4.11.3/miui_i9505_shiro_4.11.3_cc4f1bcf59_4.4.zip
Kernel
https://www.androidfilehost.com/?fid=23681161096070138
Wifi didn't work when i installed this rom.
justforgot said:
Wifi didn't work when i installed this rom.
Click to expand...
Click to collapse
did u flash the kernel?
wifi working absolutely fine with me
yea. i did. When i flash the kernal it doesn't boot up. Without kernal it boots up but no wifi.
justforgot said:
yea. i did. When i flash the kernal it doesn't boot up. Without kernal it boots up but no wifi.
Click to expand...
Click to collapse
i m having 4.4.2 kitkat bootloader and no bugs facing
so what bootloader u r on?
I followed flashing instructions to tthe t and im stuck on the samsung boot logo. What should i do?
Hello,
I recently needed an emulation machine for work. So I took my old note 2 rooted it and downgraded it to 4.1.1 so I could connect my wiimotes (the main purpose of this) for said emulators. As you all know I'm sure the Bluetooth stack is missing the protocol for this connection type. In 4.2+
My question is.....is there anyway to make a custom ROM for the note 10.1 2014 edition that is based on 4.1.1?
Thanks.
plugsmustard said:
Hello,
I recently needed an emulation machine for work. So I took my old note 2 rooted it and downgraded it to 4.1.1 so I could connect my wiimotes (the main purpose of this) for said emulators. As you all know I'm sure the Bluetooth stack is missing the protocol for this connection type. In 4.2+
My question is.....is there anyway to make a custom ROM for the note 10.1 2014 edition that is based on 4.1.1?
Thanks.
Click to expand...
Click to collapse
Did you try with Xluco's kernel ? it has written to have the ability to support Wii Controller ( If it worked , let me know , because I'm cooking Prime V5 and It's also going to have the Wii Controller support too ) .. I'm waiting eagerly for you'r results
With Best Wishes
Hitman1376
I'm gonna sound like a noob. But to be honest kernels are the things I never screwed with. Do i just flash this with twrp?
It's got the rooted 5.1.1 fw on it and just to clarify it's the SP600
I've got everything I need here (including the Kernel I downloaded) at work so.....
Okay so I flashed the kernel using twrp and unfortunately the wiimotes would not connect using blue IME or the old Wiimote Controller app.
Is there something I'm missing or does it just not work for me?
plugsmustard said:
Okay so I flashed the kernel using twrp and unfortunately the wiimotes would not connect using blue IME or the old Wiimote Controller app.
Is there something I'm missing or does it just not work for me?
Click to expand...
Click to collapse
So , I guess It means that the drivers are not compatible or maybe even not working at all ... If it's possible , flash a 4.4.2 TW stock ROM and try this kernel HERE ( If you're currently on 5.1.1 you need to flash a stock ROM using Odin ) ... this kernel I provide you is one of Xluco's KK kernels ... I'll wait for you'r results then ... Good luck
With Best Wishes
Hitman1376
Re did everything. Installed 4.4.2 and the kernel you mentioned and it still does not work with either application.
Error: bt socket connection failed
Is there a difference between stock and TW stock cuz I installed fresh stock then rooted it and installed that kernel
Regardless of whether TW stock is TouchWiz
I installed a 4.4.2 TW stock rom with root and installed the same kernel. Still nothing.
I don't know what I'm talking about here but is it really this difficult? I'm know it is to some degree, but how has this not been rectified a million times over?
Lost cause then?
Thanks to everyone who accomplishes these things and a massive thanks to the people who make the things we use to do these things...lol
plugsmustard said:
Re did everything. Installed 4.4.2 and the kernel you mentioned and it still does not work with either application.
Error: bt socket connection failed
Is there a difference between stock and TW stock cuz I installed fresh stock then rooted it and installed that kernel
Click to expand...
Click to collapse
plugsmustard said:
Regardless of whether TW stock is TouchWiz
I installed a 4.4.2 TW stock rom with root and installed the same kernel. Still nothing.
I don't know what I'm talking about here but is it really this difficult? I'm know it is to some degree, but how has this not been rectified a million times over?
Lost cause then?
Thanks to everyone who accomplishes these things and a massive thanks to the people who make the things we use to do these things...lol
Click to expand...
Click to collapse
Well , I'm Sorry to say that but , I guess there's no solution for getting the Wiimote to work on you're TAB ( Actually , XBOX & PS remotes are all accepted with Xluco's or even my kernel ) But , as you can see in many other threads , It seems like currently there's no way ... Don't worry MAN , I personally don't have a Wiimote let's just take it easy ... just enjoy the latest TW ROM with Prime V4 ( actually , V5 is in it's way !! )
With Best Wishes
Hitman1376
Well damn. I guess I'll just have to use my note 2 with the tv out.....no sound though.
Thanks. And I'll definitely install they new prime v5