Develop Bugs

[Q] Can't install new ROMs

So I'm currently running Cyanogenmod version 10.2.0 .. Android 4.3.1.
I've updated to the newest version of TWRP.
I factory wipe, then try to install a different ROM.. for example I've tried PA & AOKP.
Every time I try this it fails within 1 second and I have to restore a backup and go back to Cyanogenmod.
EDIT: I have a T-Mobile Galaxy S3
I have attached an image of when I get an error when I try to flash.
UPDATE:
Alright so I was able to get past that error by going into advanced wipe and selecting "System". Now when I flash I get a new error. I am attaching a new picture.

You need to give more info on the error
Sent from my SGH-M919 using Tapatalk

serio22 said:
You need to give more info on the error
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I'm at work now. I'll post and update with the error later.

Do you have a t-mobile s3? If you are from a different carrier such as wind mobile I could know the problem. I also had a problem flashing 4.3 Roms with my t999v wind s3.
Sent from my SGH-T999 using xda app-developers app

spartan268 said:
Do you have a t-mobile s3? If you are from a different carrier such as wind mobile I could know the problem. I also had a problem flashing 4.3 Roms with my t999v wind s3.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Mine is T-Mobile. I'm still at work til 2AM EST. I'll probably post my error tomorrow.

Alright guys, I attached a screenshot (picture lol) of my phone and the error I am getting when I try to flash different ROMs. Any help?

Alright guys.. I was able to get past that other error but now I have a new one when trying to install a new ROM.
Here is a screenshot of the error.

Shallwhat said:
Alright guys.. I was able to get past that other error but now I have a new one when trying to install a new ROM.
Here is a screenshot of the error.
Click to expand...
Click to collapse
Update your recovery. You're using TWRP 2.5.5.0 when the latest one is 2.6.3.1. If you can't boot into Android, Odin the TWRP recovery. Also, make sure you completely wipe your internal storage before flashing a custom ROM. If that custom ROM isn't working for you, try another one to see if that flashes since that would indicate that the custom ROM you're trying to flash could potentially be a bad download.
You also need to post more information about your phone.
Which custom ROM are you using?
Which kernel are you using or trying to use?
etc etc.

Noobiologist said:
Update your recovery. You're using TWRP 2.5.5.0 when the latest one is 2.6.3.1. If you can't boot into Android, Odin the TWRP recovery. Also, make sure you completely wipe your internal storage before flashing a custom ROM. If that custom ROM isn't working for you, try another one to see if that flashes since that would indicate that the custom ROM you're trying to flash could potentially be a bad download.
You also need to post more information about your phone.
Which custom ROM are you using?
Which kernel are you using or trying to use?
etc etc.
Click to expand...
Click to collapse
I've tried flashing multiple ROMS.. Slimbeam.. AOKP.. ParanoidAndroid.. I've downloaded from GOOManager and I've also downloaded from external links and put on my external SD card. Nothing works. Like I said in the OP I am running Cyanogenmod 10.2.. Android 4.3.1. I'm using the Ktweaker kernel.
I updated my TWRP from Goomanager and it only updated to 2.5.5.0. How do I get it to update to 2.6.3.1?

So I just went to update TWRP from goomanager again and when it went to download it failed because "invaid MD5 sum".
Edit: So I tried updating again and it said it was successful. I rebooted into recovery and it still says 2.5.0.0
I'm lost.

Same problem happened to me last night, I tried to install the modem again but the same error keep coming up.

To everyone with issues updating recovery. Goo has a openrecovery script issue. Your best bet is to flash latest Recovery using Odin. You may choose to use Mobile Odin if you feel like it.

Can't restore anything except Kitkat
I keep getting the same error, except I can't flash or restore any rom that isn't kitkat (all the kitkat roms are buggy so i want 4.3 back). I reflashed twrp 2.6.3.1 with odin but its still not letting me flash anything.
Also if it helps I can't copy anything from the internal SD to the external SD using twrp file manager.

Older Rom's backups can't be restored due to file system changes. You will have to wipe everything and flash fresh if you want 4.3

I tried the latest version of TWRP, and I'm on StockROM by TeamInferno. I got V7 and I saw an update on it last night (V8) so I downloaded it and tried to install it fom Clockworkmod recovery and it didn't work so I tried TWRP and the same thing happened. Do I have to wipe everything to update my ROM?

Nothing will flash except Kitkat
Perseus71 said:
Older Rom's backups can't be restored due to file system changes. You will have to wipe everything and flash fresh if you want 4.3
Click to expand...
Click to collapse
Ive tried that multiple times. once the Odin flashable tw 4.3 downloads, I'm going to try that but I can't flash any fresh roms using twrp except 4.4 (Jellybam to be specific).
I tried Stockorama 4.3 tw, but it would just reboot after getting past the "samsung galaxy sIII" screen (tried insecure kernal too). I'm wondering if I'm in a weird soft brick or something

Shallwhat said:
So I just went to update TWRP from goomanager again and when it went to download it failed because "invaid MD5 sum".
Edit: So I tried updating again and it said it was successful. I rebooted into recovery and it still says 2.5.0.0
I'm lost.
Click to expand...
Click to collapse
Did odin flash of the most current recovery take care of your issue?
Hastily spouted for your befuddlement

GodLik3 said:
I tried the latest version of TWRP, and I'm on StockROM by TeamInferno. I got V7 and I saw an update on it last night (V8) so I downloaded it and tried to install it fom Clockworkmod recovery and it didn't work so I tried TWRP and the same thing happened. Do I have to wipe everything to update my ROM?
Click to expand...
Click to collapse
What was the specific error message when flashing ?
QuatroQuatro said:
Ive tried that multiple times. once the Odin flashable tw 4.3 downloads, I'm going to try that but I can't flash any fresh roms using twrp except 4.4 (Jellybam to be specific).
I tried Stockorama 4.3 tw, but it would just reboot after getting past the "samsung galaxy sIII" screen (tried insecure kernal too). I'm wondering if I'm in a weird soft brick or something
Click to expand...
Click to collapse
What is your TWRP Version ? Also what is your Bootloader version ? (No its not the baseband)

My bootloader is T999UVUEMJC
My baseband is uvuemjc
TWRP is version 2.6.3.1 (I've also tried 2.6.3.0)
I think it got updated bootloader/baseband when I odin flashed stock tw 4.3 (the only jellybean ROM that works)
I also made a backup of my 4.4, but it wouldn't let me restore even that.

You have been talking about 2 different things.
1. Flash a New Rom - Either Touchwiz or AOSP. $.3 or newer.
2. Restore a Rom - I think you are talking about a Nandroid Restore.
If you are referring to Point 1 as "Restore Rom" then you need to change terminology in order to help us understand your problem correctly. Re-Flashing a rom that you used to have is still Flashing not "Restore".
With that UVUEMJC Bootloader, you can completely forget about flashing previous Touchwiz Firmwares such as UVDMD5 or UVDLJC. If you tried them, you WILL brick your phone. If you tried Custom Touchwiz Roms based on those 2 firmwares, it may or may not work.
Now if you are trying to flash a AOSP Rom, either 4.3 or Kitkat 4.4, and you do have latest TWRP, (2.6.3.1), please specify the error message in detail.
You must do Factory Reset and Wipe Dalvik + Cache in the Recovery before flashing the AOSP Roms.

Several Qs: 0 folder under sdcard\download\, soft bricked, counter...etc

My I747 is currently running Carbon Rom nightly 20131102 (4.3.1), it's quite old and I want to upgrade to 4.4.
So last night I nandroid backup , format system, data, flashed Carbon KK on it, then gapps, data, cache, delvik, reboot. But it stayed at the CM alien. I reflashed several times but still stuck at there. But I can nandroid back so I'm kind of fine now. But anyone know why?
Second, I notice my \0\ folder is under sdcard\download\0\ than usual sdcard\0\, I must have done something wrong when I first flash the carbon but I don't know what it is. I usually put my .zip in download, could that be why? Could that cause the bricking I have with KK?
Last, I know there's a flash counter and when I first root/flash last year, I went thru many things to avoid that&IMEI, instead of directly flashing a recovery. I think that could be the source of the problems above??? Now 1 year is up and my warranty is already over so I don't have to worry about the counter anymore. If I want to redo everything, and have to noobiest/simpliest method to flash to KK, what should I do?
Sorry if I lack any essential information. I'd be happy to find it to help.

Did you update to the latest CWM before flashing the ROM? Is your current bootloader supported by the ROM?

Not the latest but 6.0.4.3
I'll update it to 6.0.4.7 and try again.
Unfortunately I don't know if my bootloader is supported. I don't really know how to find mine.

I would update to the latest CWM and then try to flash a 4.4.2 custom ROM. If it doesn't install, it should generate an error message.
Most custom ROMs will look for a particular bootloader. If the bootloader is not found, CWM will give you get prop errors.

audit13 said:
I would update to the latest CWM and then try to flash a 4.4.2 custom ROM. If it doesn't install, it should generate an error message.
Most custom ROMs will look for a particular bootloader. If the bootloader is not found, CWM will give you get prop errors.
Click to expand...
Click to collapse
Thanks, I'll try when I get home.
I installed the ROM fine last night without any error. So I believe the bootloader is supported then.

afyaff said:
Thanks, I'll try when I get home.
I installed the ROM fine last night without any error. So I believe the bootloader is supported then.
Click to expand...
Click to collapse
To be sure, look at the bootloaders mentioned in the ROM's updater script.

HELP - Unable to update to B125

Guys, i received push notification through system update to B125 and after downloading i tried to update but received error as attached.
i have tried using the dload + 3 buttons method without success so far.
Can anyone please advice how i can update ?
thanks a lot

harryhh said:
Guys, i received push notification through system update to B125 and after downloading i tried to update but received error as attached.
i have tried using the dload + 3 buttons method without success so far.
Can anyone please advice how i can update ?
thanks a lot
Click to expand...
Click to collapse
Try this:
1. Choose factory reset on the recovery.
2. Then retry update.
If that doesn't work:
1. Try to redownload the B125 ROM. It might be just that the file is corrupt.
If that still doesn't work:
1. Tell me; what ROM are you on right now? And did you just revert back from TWRP?

bokchoi2020 said:
Try this:
1. Choose factory reset on the recovery.
2. Then retry update.
If that doesn't work:
1. Try to redownload the B125 ROM. It might be just that the file is corrupt.
If that still doesn't work:
1. Tell me; what ROM are you on right now? And did you just revert back from TWRP?
Click to expand...
Click to collapse
Is that significant and why? I have the same issue and I have jut reverted from TWRP.
Thanks.

iwtfmcl said:
Is that significant and why? I have the same issue and I have jut reverted from TWRP.
Thanks.
Click to expand...
Click to collapse
I still need to know what ROM you installed previously. If you were on a Huawei stock rom, this situation is kinda weird.
If you were on a custom rom, you could try the following:
Warning: You will lose your data in this process. Make sure to backup anything that is valuable to you.
Go back to twrp.
Make sure you wipe the following:
System, Data, Custom storage, Dalvik Cache, cache
Then install stock recovery.
Then install B125.

bokchoi2020 said:
I still need to know what ROM you installed previously. If you were on a Huawei stock rom, this situation is kinda weird.
If you were on a custom rom, you could try the following:
Warning: You will lose your data in this process. Make sure to backup anything that is valuable to you.
Go back to twrp.
Make sure you wipe the following:
System, Data, Custom storage, Dalvik Cache, cache
Then install stock recovery.
Then install B125.
Click to expand...
Click to collapse
I am not OP but I had same issue. What happened in my case is weird. Originally I was on B118 International, then I went to B118CN to try and flash MIUI ROM. That didn't work and I force-flashed B118CN again. That's when I got push notification to update to B120. It was specifically saying that "P6-U06V100R001C17B118 will be updated to P6-U06V100R001C17B120.
After several failed attempts, update was no longer offered, and to my surprise my build number was showing P6-U06V100R001CNCN00B118. I am 100% sure that it was P6-U06V100R001C17B118 when I flashed it.
I have no idea what happened. I wanted to stay on chinese ROM and downloaded P6-U06V100R001C17B120, flashed and all is ok so far. Build number is showing P6-U06V100R001C17B120.

[Q] Soft Bricked my phone, have no idea what to try next.

Hey Guys,
I just got a new Samsung Galaxy S3 SGH-I747 in the mail and I immediately started to install Cyanogenmod. I have installed it on two S3's in the past, but this time I had no idea about the new bootloader problems after Android 4.3 (I think?). I got CWM touch installed with no problems via Odin, but when I tried to use the Unified Android Toolkit thing to root and stuff I got stuck in a boot loop. The phone would not boot past the Samsung logo, not the animated one with the purple light, but the one that shows the phone model.
I have tried everything I could think of and all that I tried to google for the past couple hours to no avail. I stupidly did not make a backup of my stock ROM, and I couldn't find a stock 4.4.2 ROM except this one that says it is stock but with root. I flashed that ROM and then it booted past the Samsung logo and the animated one, but is now stuck on the AT&T logo. I looked up that problem and couldn't find any real information on that problem except one thread where it said I should install Kies and let it do the Firmware Upgrade and Initialisation option. That failed and then my phone would only turn on straight to download mode.
I reflashed CWM and that worked so I thought that if I tried to install Cyanogenmod 11 it might work because that ROM is 4.4.1 or higher (Again, I think?). Now it's back into the loop where it makes it past the samsung stuff but then gets stuck on the AT&T logo. Is there anything I can do?
Thanks,
Jemimacakes

Did you try wiping cache, data, and Dalvik in CWM?
Did you try installing CM10.2 from CWM?

audit13 said:
Did you try wiping cache, data, and Dalvik in CWM?
Did you try installing CM10.2 from CWM?
Click to expand...
Click to collapse
Yes, I have tried clearing stuff in both CWM and stock recovery. Im not sure about the Dalvik one though, unless that is cleared when you do factory reset and clear cache I didnt do it. I can try flashing CM10.2 ( which I would prefer to have over 11), but my understanding is that my boot loader will not let me install anything that uses any lower versions of android, but I'll give it a shot and let you know.

Ok guys,
I tried to install Cyanogenmod 10.2 and when I put it on my sd card and tried to install it with CWM It threw and ton of errors that look like this.
assert failed: getprop("ro.bootloader") == "I747UCDLK3" || getprop("ro.bootloader") == "I747UCDMG3" || etc etc.
Im not super experienced with programming, but im guessing that CM10.2 can find any bootloader it can use? Im not sure what my bootloader is if that is the case, but I can boot into recovery so I must have something, right?
Anything I can do?
Thanks
Jemimacakes

You should try flashing cm10.2 just to see if you can get your phone to boot. By booting the phone, you can determine your bootloader and modem.
Edit: okay, cm10.2 doesn't work. Are you running the latest version of cwm? Maybe try twrp?

Hey,
I did have the latest version of CWM, but I tried it on TWRP and got the same errors

audit13 said:
You should try flashing cm10.2 just to see if you can get your phone to boot. By booting the phone, you can determine your bootloader and modem.
Edit: okay, cm10.2 doesn't work. Are you running the latest version of cwm? Maybe try twrp?
Click to expand...
Click to collapse
Hey,
I have now tried both custom recoveries and gotten the same errors on both, and I made sure I had the latest version of each. Can I flash the firmware from 4.3 and then install CM10.2? Will that work? I really don't want to hard brick my phone.
EDIT: I installed ADB to find out what my bootloader was, and it returned that I had the NE4 version. Is there a way to get the MJB version safely so I can install 10.2?

At this point I just want it to boot up to anything, so if that is easier to do than get CM to work then im completely open.

You cannot go back to MJB from NE4.
How did you try to install CM the first time? Did you use the install manager or a custom recovery?

The last time I installed CM on a i747 was back when the phone was on 4.1.1. The second phone I installed it on was the international version of the phone, also on 4.1.1. I used a custom recovery both times. I bet if I would have used the new installer on this phone it would have worked, but I was trying some other stuff because I was curious and ended up breaking it.

IT BOOTED!
I reflashed the stock firmware + root, reinstalled stock recovery and wiped everything I got it to boot into its stock ROM. From this point, where do I go? Will the CM installer work or will it just brick it again?
Thanks
Jemimacakes

I would copy a custom rom such as cm11 to the internal and external sd card.
I would then download the latest version of philz touch for the d2lte. Get Odin 3.07. Put the phone in download mode, open Odin, uncheck all options except f reset time. Flash philz, when you see reset in the status window, remove USB cable, remove battery, insert battery, boot into recovery, create a nandroid of your current rom, flash cm11, wipe cache, wipe data, wipe dalvik, reboot.

audit13 said:
I would copy a custom rom such as cm11 to the internal and external sd card.
I would then download the latest version of philz touch for the d2lte. Get Odin 3.07. Put the phone in download mode, open Odin, uncheck all options except f reset time. Flash philz, when you see reset in the status window, remove USB cable, remove battery, insert battery, boot into recovery, create a nandroid of your current rom, flash cm11, wipe cache, wipe data, wipe dalvik, reboot.
Click to expand...
Click to collapse
Which version of CM11 should I get. On the site I see that the last version of CM11 for the I747 (d2att) was released on feburary 16, is this one based on 4.4.2?
EDIT: Also, I should copy CM11 to both the internal and external storage? Why is this?

You should be using roms made for the d2lte.
I suggest both because cwm or twrp may see one but not the other. This doesn't usually happen but I am always paranoid about something going wrong as flashing always involves risk and I like to minimize risks and be prepared for disaster.

audit13 said:
You should be using roms made for the d2lte.
I suggest both because cwm or twrp may see one but not the other. This doesn't usually happen but I am always paranoid about something going wrong as flashing always involves risk and I like to minimize risks and be prepared for disaster.
Click to expand...
Click to collapse
Alright, but I have the at&t version of the phone. Are they both compatible with one another?
EDIT: OK, correct me if im wrong, but my new understanding is that CM now has releases for general versions of phones, so the most recent update of CM for my phone is the d2lte, not d2att?

Before unified builds for the msm8960 were started, the i747 was known as the d2att and the i747m was known as the d2can.

audit13 said:
Before unified builds for the msm8960 were started, the i747 was known as the d2att and the i747m was known as the d2can.
Click to expand...
Click to collapse
Hello again,
Thanks a ton Audit, my phone is up and running with the latest cyanogen nightly! A recap for anyone who might come across with a similar problem.
1. I installed a ROM using an older version of android onto a phone with the new bootloader (NE4), softbricking it.
2. I installed the stock ROM + root from this link using Clockworkmod
https://www.androidfilehost.com/?fid=23501681358550126
3. Installed the stock Recovery from this link and did wiped my data and both caches
https://www.androidfilehost.com/?fid=23681161096070493
4. I rebooted the phone and waited at the AT&T logo for a while, and it booted up normally!
5. I installed the most recent version of Philz Touch Recovery for the d2lte, made a nandroid for safety, and then install the latest nightly of CM11 for the d2lte.
6. It works!
Thanks again to Audit for helping me out!
Jemimacakes

I'm glad it all worked and I was able to help in some way.
It's great that you posted your solution in case it helps other people in a similar situation.

I think i'm in a similar place - a few questions. You used cwm to install the stock ROM? I thought you needed to use odin. Also, why did you need to install the stock recovery (and did you just flash the .zip in cwm)? Also, that stock rom you linked to is 4.4, right? Would that work if I was on 4.3?

Before flashing anything, I suggest you confirm your bootloader and modem. Flashing the wrong combination of modem and bootloader could hard brick your phone.
If your phone does not boot, try flashing Philz Touch for the d2lte and flash the latest cm11. Hoepfully, this will get your phone running so you can confirm the bootloader and modem. CM11 does not flash a modem or bootloader.

ROM new Lineage 14.1 Unofficial WhenICanlies d2tmo 4-10-18

I have been working on the sister models also. I saw no one was building these anymore so here it is I hope it can be enjoyed by all. Spread the word. provide feedback so other fans of this ROM may obtain it and work out any bugs if there are any. I will update once or twice a week depending on time and demand. I'm compiling for three different variants. Hit the thanks button and Enjoy. Dirty flash the updates not the initial flash of this rom but the updates to it. Initial install = Factory reset, wipe data and cache, install rom zip, install gapps zip, install su zip, reboot system. As of 9-3-18 i will be switching to Ubuntu 18.04 Bionic Beaver, that being said i do not know if i will have to change anything or do anything different to keep pushing these updates out but i will most definitely try to keep them coming.
4-10-18
https://www.androidfilehost.com/?fid=890129502657597436
4-13-18
https://www.androidfilehost.com/?fid=818070582850507491
4-17-18
https://www.androidfilehost.com/?fid=818070582850508419
4-24-18
https://www.androidfilehost.com/?fid=673956719939836620 If it's an update then dirty flash it if you already had SuperSU installed you will need to reflash the SuperSU zip if you are installing for the first time you just need to install the SuperSU app
5-4-18
https://www.androidfilehost.com/?fid=818222786056028546
Root is not baked in. Flash and root your preferable way.
5-20-18
https://www.androidfilehost.com/?fid=674106145207488021
5-31-18
https://www.androidfilehost.com/?fid=674106145207490572
7-28-18
https://www.androidfilehost.com/?fid=5862345805528060741
9-3-18
https://www.androidfilehost.com/?fid=1322778262903996744
10-07-18
https://www.androidfilehost.com/?fid=1322778262904022369
12-7-18
https://www.androidfilehost.com/?fid=11410963190603868411
12-16-18
https://www.androidfilehost.com/?fid=11410963190603876081
2-25-19
https://www.androidfilehost.com/?fid=1395089523397901582
3-24-19
https://www.androidfilehost.com/?fid=1395089523397924752
5-6-19
http://download1589.mediafire.com/7...q5/lineage-14.1-20190507-UNOFFICIAL-d2tmo.zip
10-13-19
https://www.androidfilehost.com/?fid=1899786940962607809
i recommend clean flash as i built with different computer
setprop persist.lineage.nofool true in terminal emulator with root privs (type su first grant permission then setprop persist.lineage.nofool true) gets rid of persistant notification
Bluetooth dialtone when playing music fix
Settings > Battery > tap in 3-dot menu at top right tap on Battery optimisation. To show all apps and services here, select the ‘All apps’ options under the dropdown. Tap on both of the Bluetooth services and change them to Don't optimise.

thanks bro... but is it rooted rom or use any method to root it ?

hasan.sy said:
thanks bro... but is it rooted rom or use any method to root it ?
Click to expand...
Click to collapse
I use SuperSU zip

the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it

hasan.sy said:
the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it
Click to expand...
Click to collapse
I appreciate the feedback and no worries mate I'm still trying to get the no sim bug worked out in the att variant no luck so far sprint variant is doing good also

Update posted 4-17-18

It won't boot up for me. I installed the ROM after wiping my entire system through TWRP, flashed Gapps, and installed SuperSU provided by TWRP. When it boots up it says system isn't responding.

Sammay_Boiii said:
It won't boot up for me. I installed the ROM after wiping my entire system through TWRP, flashed Gapps, and installed SuperSU provided by TWRP. When it boots up it says system isn't responding.
Click to expand...
Click to collapse
Wipe system, cache, and dalvik install rom zip install nougat Gapps and SuperSU all at the same time meaning do not reboot until you have flashed all three if it didn't work the first time try it again just make sure you wipe system, cache and dalvik and install the Gapps at the same time it sounds like it's booting up but conflicting with other elements otherwise it would be bootloop and not system isn't responding

Joker1716 said:
Wipe system, cache, and dalvik install rom zip install nougat Gapps and SuperSU all at the same time meaning do not reboot until you have flashed all three if it didn't work the first time try it again just make sure you wipe system, cache and dalvik and install the Gapps at the same time it sounds like it's booting up but conflicting with other elements otherwise it would be bootloop and not system isn't responding
Click to expand...
Click to collapse
Thank you for your rapid response! I will try that as soon as I get to my house and I'll let you know what happens

After doing what you said, it still says "process system isn't responding" I will try a few more times. Also, I'm flashing off nothing. There is no OS, no personal data, just TWRP. Does this have to be flashed on CM12 or something?

Sammay_Boiii said:
After doing what you said, it still says "process system isn't responding" I will try a few more times. Also, I'm flashing off nothing. There is no OS, no personal data, just TWRP. Does this have to be flashed on CM12 or something?
Click to expand...
Click to collapse
You need to Odin flash the latest stock firmware then root then flash recovery then flash the rom
This should help
https://forum.xda-developers.com/showthread.php?t=1949687

Joker1716 said:
You need to Odin flash the latest stock firmware then root then flash recovery then flash the rom
Click to expand...
Click to collapse
I will do that. Your rom needs to be flashed over stock rom?

Sammay_Boiii said:
I will do that. Your rom needs to be flashed over stock rom?
Click to expand...
Click to collapse
No this is lineage os 14.1 it's not mine I just build it because they have stopped doing it officially for this variant of the s3 but there's more to a phone than just the system and you have nothing but a recovery? There's bootloader modem, Efs etc. You wouldn't be able to even flash CM12. in TWRP are you going into advanced wipe or are you just swiping the slider?

Joker1716 said:
No this is lineage os 14.1 it's not mine I just build it because they have stopped doing it officially for this variant of the s3 but there's more to a phone than just the system and you have nothing but a recovery? There's bootloader modem, Efs etc. You wouldn't be able to even flash CM12. in TWRP are you going into advanced wipe or are you just swiping the slider?
Click to expand...
Click to collapse
What you said makes a lot of sense actually. Im used to just flashing back ups of other roms that I forgot how to flash fresh ones. I'm not used to this haha but I got it now. Stock rom 4.3 has been flashed via odin and the root method is currently on my screen.

hasan.sy said:
the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it
Click to expand...
Click to collapse
What was your system status before flashing the rom? What software? I'm having trouble flashing it on my S3

Sammay_Boiii said:
What was your system status before flashing the rom? What software? I'm having trouble flashing it on my S3
Click to expand...
Click to collapse
t999uvuenc2 firmware and bootloader 4.3 using twrp recovery 3.2.1-0..... you must update to latest official firmware t999uvuenc2 to flash any rom 5.1.1 lollipop and higher

hasan.sy said:
t999uvuenc2 firmware and bootloader 4.3 using twrp recovery 3.2.1-0..... you must update to latest official firmware t999uvuenc2 to flash any rom 5.1.1 lollipop and higher
Click to expand...
Click to collapse
Thank you. Ive been flashing this rom repeatedly and always received a "Process system not responding" then it falls into a boot loop

Update posted

Joker1716 said:
Update posted
Click to expand...
Click to collapse
Does it need wipe data and cash before flash or we can do dirty flash without any thing?(update from 13-4-2018 to this rooted update)

hasan.sy said:
Does it need wipe data and cash before flash or we can do dirty flash without any thing?(update from 13-4-2018 to this rooted update)
Click to expand...
Click to collapse
If it's an update then dirty flash it if you already had SuperSU installed you will need to reflash the SuperSU zip if you are installing for the first time you just need to install the SuperSU app