HEy, so im not sure what happened however i can no longer do anything with my ouya.
Start up all i get is black screen, try alt+prntscrn+i trick, doesnt work, computer doesnt see it as adb device or mtp device, it powers on turns tv screen black and thats it.
it had cwm on it but its like the keyboard isnt working at all, no power to it to light up cap locks light ( which is usually how i test the keyboard is working)
Any advice?
Hold alt+prntscrn and keep tapping i for 45-60 seconds then see if it will go into recovery. It can be really tricky getting it to work sometimes.
Related
hi
i was upgrading my universal, following instructions from http://wiki.xda-developers.com/index.php?pagename=Helmi
after upgrading, on my computer i received an error saying the upgrade was unsuccessful and now my universal is dead
i tried hard resetting, i tried putting it into bootloader mode...
there is nothing on the screen
what should i do?
have you ever entered BL before? most new users would not realise their in BL as it doesn't have any backlight. look closely
yes, i have, it isnt working at all, there is nothing on the screen
when i try to flash the device the pc says error 101 connection error
does your charge light appears when connected to AC power?
nope, no charge light
its sad just about 3 hours ago my device was working perfectly
here's what you do:
start activesync on your computer.
Go to connection settings and deselect allow usb connections.
connect your uni to your computer and push the backlight + on/off button and hold these. Then press the reset with your pen, still holding the backlight and on/off.
The screen should say something about serial or usb.
The backlight will not be lighted so it's hard to read.
If the screen doesn't say anything, unplug and plug in the usb connecter one more time.
Does your red charge led lit when you put it on the wallcharger ?
i tried that, many many times, screen still remains blank
nope, no red light when i plug it into the wall
this is bad, its not responding to anything
When plugged, does it give you a red blink (Charge light) when you Soft Reset?
yes!
yes, the first sign of life, when pluged in via usb to the pc, when i soft reset i get a red blink
any ideas?
Try holding down Light + power for at least 5sec. and while still pressing, do a soft reset.
If you dont go to BootLoader then try to increase the Hold down Light + Power some more.
And BTW. dont get stressed, keep cool.
Youl just **** it even more up if you get stressed, Ok
k, i just tried that, everytime i let go fo the soft reset button the pc says the usb device is not recognized, but still nothing on the screen
lol yeah ur right
thanks for the help
NP. now run the original upgrade for your device...your device is in boot loader right?
nope no bootloader, the screen is completely blank
sahir said:
nope no bootloader, the screen is completely blank
Click to expand...
Click to collapse
Look closely, it wont have backlight on, so look really closely.
Remove the SD card and Sim, and just keep trying different time intervals with the "holding down Light + power for at least 5sec. and while still pressing, do a soft reset."
And if you had low battery when you started the upgrade, the use your Wall charger, not USB charger...and let it stay in for 1/2 hour before proceding.
Keep us updated
i removed the sim and sd, and have tried many different intervals, i charged the device all night last night with teh wall charger, still no luck
Hmmmmm, this is a bit strange.
The exact same thing happend to me some 5 days ago.
I managed to get it back with this trick.
Try Soft Reset between every try....just hang in there suddently it wil come to life
Do a ATX-reset/Destat.
Remove charger, battery etc and push in on/off button for 30sec twice. Then push down as many keyboard buttons as you can for a little while too. This way you "drain" it and everything should be reset. Try again.
Works especially well on computers that don't wanna POST. Same thing with cellphones, TV's, remotes etc.
ATX-Reset/Destat. Remember that one. Can solve loads of glitches.
How do I know?
Don't ask I work with these kind of issues every day.
i just tried the atx reset destat idea, it didnt boot it up
ive tried many different intervals now, ive spent hours trying to get this to work
bosjo were u connected to the pc while trying to get it into bootloader?
ok so here is the rundown
Device: HTC one on vzw
Rom: Slimbean 2.x
Gapps: Slim AIO gapps
had a weird problem with the display today if anyone has had this or know someone who has i would greatly appreciate the help. I just flashed Slimbean 2.x last night and all was good. no problems what so ever, got everything setup and was working fine. this morning around 10am i opened snapchat to view a video. i clicked on the video and as soon as it started the screen went blank and would not turn on. i tried holding the power button down for at least a minute and nothing. also tried power and volume down, power and both volume buttons, power and volume up and still nothing seems to work. when i plug it into the wall charger the red LED light does not turn on and screen does not wake. when i plug it into the computer the computer does not ever read the device and noting pops up letting me browse the files on the phone. i have no clue why this happened it has been working fine for the 3 months that i've had it. took it to verizon about an hour ago and they didn't know either but they are sending me a replacement htc one. all i really want now are my photos that i have on the phone.
does anyone have any ideas about what i could do?
thanks
I had something similar and think it was conflict related. After installing the "advanced power menu" with xposed, I had an issue when trying to use it to boot into recovery. Basically it had timed out and then went away without rebooting. The next time I tried it locked up and my screen went black. My keys would light up if I clicked on the power button (it was dark in the room so the sensor was still working), but nothing else. Nothing I did would make the screen turn on at all and holding down the power key to reboot did not work. I just planned on letting the battery die out. After about 45 minutes, the phone just rebooted and everything was back to normal. I really think it locked up due to a conflict similar to what a PC might do.
The G3 just dropped down on the floor with the circle case. Then It was working some minutes apparently with no problem, until I myself turn the phone off and restart it. Then the device just didn't turn on. The only thing is that the screen is black and the led notification blinking green and blue
when i connect the charger, the red led blinks once and then disappears, then after 30 seconds the red led appears which apparently shows that the phone is charging the battery. Also When I connect the phone to the PC, a sound of connection is heard from PC but the PC doesn't complete the device recognition process as no new device is found.
I tried to make a hard reset, but nothing happens when I press the power and volume down keys. Tried some other tricks with the battery and the hard keys on the phone but no result at all, as the same story just repeats. Does anybody have a solution for the problem? This devise is the only android device I have
Help
Please Help :crying:
ashkaboos said:
The G3 just dropped down on the floor with the circle case. Then It was working some minutes apparently with no problem, until I myself turn the phone off and restart it. Then the device just didn't turn on. The only thing is that the screen is black and the led notification blinking green and blue
when i connect the charger, the red led blinks once and then disappears, then after 30 seconds the red led appears which apparently shows that the phone is charging the battery. Also When I connect the phone to the PC, a sound of connection is heard from PC but the PC doesn't complete the device recognition process as no new device is found.
I tried to make a hard reset, but nothing happens when I press the power and volume down keys. Tried some other tricks with the battery and the hard keys on the phone but no result at all, as the same story just repeats. Does anybody have a solution for the problem? This devise is the only android device I have
Click to expand...
Click to collapse
Did you do anything else after/during the time that the phone was off? And is there no possibility that you cracked the LCD digitizer? I mean it might sound strange but this is what I had with my old phone. I dropped it, nothing serious but then I put it in my pocket and upon taking it out I noticed the screen not turning on. As stated above, my digitizer was broken and multiple people told me that the digitizer had a small crack which I didn't notice, then when I put it in my pocket I put too much pressure on the digitizer cracking it. The LED-light did work though, and this sounds very similar so my advise going to the store and asking wether they know what the problem might be.
(Hopefully this was helpfull hehe)
ashkaboos said:
Please Help :crying:
Click to expand...
Click to collapse
If you Don't see the LG splash screen when pressing the power button it seems like a screen or digitizer problem for sure.
BUT;
after you try turning it "on" let it sit a few minutes and see if you can call your self or send a text to see if it makes noise vibrates etc. to confirm a screen problem.
OR
Also you can try putting it into download mode.
Battery pull (don't turn on)
plug USB into phone but not computer
Hold volume down AND then plug usb into computer
if this comes up to a pic of something on the phone it will be software related. to get out of this mode you can do a battery pull.
Remember to always read up on topics and things you are doing. There are guides here on XDA to help you out.
Hope you get your phone working
Neorpowa said:
Did you do anything else after/during the time that the phone was off? And is there no possibility that you cracked the LCD digitizer? I mean it might sound strange but this is what I had with my old phone. I dropped it, nothing serious but then I put it in my pocket and upon taking it out I noticed the screen not turning on. As stated above, my digitizer was broken and multiple people told me that the digitizer had a small crack which I didn't notice, then when I put it in my pocket I put too much pressure on the digitizer cracking it. The LED-light did work though, and this sounds very similar so my advise going to the store and asking wether they know what the problem might be.
(Hopefully this was helpfull hehe)
Click to expand...
Click to collapse
I didn't do anything special after/during the time the phone was off. I checked the screen very carefully under a lamp. No particular sign of crack. Thank you very much for sharing ur experience.:good:
Tweakecho said:
If you Don't see the LG splash screen when pressing the power button it seems like a screen or digitizer problem for sure.
BUT;
after you try turning it "on" let it sit a few minutes and see if you can call your self or send a text to see if it makes noise vibrates etc. to confirm a screen problem.
OR
Also you can try putting it into download mode.
Battery pull (don't turn on)
plug USB into phone but not computer
Hold volume down AND then plug usb into computer
if this comes up to a pic of something on the phone it will be software related. to get out of this mode you can do a battery pull.
Remember to always read up on topics and things you are doing. There are guides here on XDA to help you out.
Hope you get your phone working
Click to expand...
Click to collapse
I tried to put it into download mode, but no result at all as no connection could also be made between the phone and PC. Moreover, I tried to make a text/call, but nothing is received by the phone. Thank you very much for ur suggestions.
ashkaboos said:
I tried to put it into download mode, but no result at all as no connection could also be made between the phone and PC. Moreover, I tried to make a text/call, but nothing is received by the phone. Thank you very much for ur suggestions.
Click to expand...
Click to collapse
Seems like the drop damaged the memory and the phone can't reload it, you will have to bring it in
suljo94 said:
Seems like the drop damaged the memory and the phone can't reload it, you will have to bring it in
Click to expand...
Click to collapse
Yeah that's plausible ! I'd bring it in too
Hope you fix your phone fast
Yeah... Probably it's a hardware problem. Someone who checked the phone in order to fix it, said that the problem had been with the device board. Even though I was satisfied with the phone, I have found out that the G3 is a sensitive device, as the height of the table from which it dropped down wasn't too much. So always take care of your G3 phone.
Basically, the device wont turn on no matter what I do, no matter what key combinations I use. If I plug it into a power outlet, the LG logo comes up, then the tablet shuts down, then the LG logo comes up, rinse and repeat.
If I plug it into a PC, I get the sound of it connecting and disconnecting over and over, but nothing comes up on the display.
I've never had a bricked device that I couldn't unbrick by going into adb or download-mode but I can't even get into download mode. I'm stuck and ran out of ideas.
Any help would be greatly appreciated! Thanks!
EDIT: I got it to show the charging logo. Basically just left it plugged in doing the logo-loop for about 15 minutes until the battery indicator showed up. Very strange. Hopefully once it's charged everything will be fine.
Have you pressed the volume up key + pressed the power button multiple times over and over, I can get mine into download mode only if I use that method.
When I corrupted my tablet, first it would hang on the LG logo screen and never boot into anything, once, then I got the issue of it boot looping only into TWRP only even after installing ROM's, then flashed TWRP in TWRP, and wala, fastboot boot loop only, for the life of me I could not get it to go into download mode, I had almost given up, but alas the last attempt to randomly smash buttons unveiled that holding volume up + clicking power over and over rather quickly rendered it to download mode...
If your getting the LG logo screen its likely that you can recover it.
As for the connecting/disconnecting, its likely that the device your connecting it to cant provide the power being pulled by the device, I have to use a powered USB hub for my Alienware 17 (R2) early 2015 laptop, as it cant handle the power draw of almost any devices, I have had issues even with self powered USB portable hard drives, so I really can feel your pain.
Hi guys, having some trouble with my tablet. Started out of nowhere, but the screen doesn't light up until the device has been fully restarted, in which case once you lock the screen, the problem starts all over again and I have to restart it again. It also lights up when the device is off and the power cord is plugged in, but only briefly. Once it goes away, I can't use the power button or anything else to check the status of charging, only thing that works is unplugging it and plugging back in. It's still sensitive to the touch, there's haptic feedback, capacitive buttons work, it just stays black most of the time. Has anybody else had this issue and knows how to fix it? It came out of nowhere, the device is not rooted, haven't dropped it or anything. Thanks in advance