Related
In a 100% dark area (movie theater, etc.), when I flick my wrist to turn on the watch, it turned on with full brightness on. It stay there indefinitely... sometimes it'll go away by itself, other time I have to do something, like swiping cards before the screen will go dim.
In a semi (50% dark), the screen will not turn on to its full brightness, but at... dim. WTH?!
Stick watch face?
I've noticed this as well (when driving at night). Since it turns on all the time (I steer with the same hand I wear my watch on), I've noticed lots of strange behavior. Sometimes it turns on very bright, and then goes back to sleep. Sometimes it turns on bright and then dims to the minimal brightness that it should be. Sometimes it turns on with the appropriate, minimum brightness. There seems to be no rhyme or reason to it. I'm running a stock watch face, and have very few apps installed.
As someone offered up 'muting' the watch while driving in another thread as a possible solution, it doesn't help me. Whether or not the watch is muted, it still wakes up all the time, and varying brightness levels.
bruceo said:
Stick watch face?
Click to expand...
Click to collapse
Emm...you mean stock watch face? If yes, I am using the classic one.
Auto brightness works well for me with ambient mode ON, I think I remember it being buggy with ambient mode OFF, what is yours set to?
v3ngence said:
Auto brightness works well for me with ambient mode ON, I think I remember it being buggy with ambient mode OFF, what is yours set to?
Click to expand...
Click to collapse
I have ambient mode OFF to save battery. Will turning it on fix the issue? I use Sleep as Android for sleep tracking and turn Ambient off and it lights up here and there at night.
Cut it out guys. ..or this thread will be locked
Sent from my GT-N7100 using Tapatalk 2
pakure said:
Cut it out guys. ..or this thread will be locked
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
^^This...well probably not locked
I did a little thread cleaning to remove the off topic arguments about using a device (phone or watch) in a movie theatre. There were a lot of people who quoted these posts, and unfortunately I had to remove these posts as well...sorry for that.
Here is the thing, this thread is about the buggy behavior of the watch waking up at full brightness. It doesn't matter if it is in a theatre, whilst driving the car, or you just woke up in the middle of the night and want to check the time. More that one person has reported the issue and there has been a proposed fix...please keep the thread focused on finding the root causes, fixes, work arounds, etc. No matter what, please knock off the name calling, that will only get you into trouble!
Thanks!:good:
lanwarrior said:
I have ambient mode OFF to save battery. Will turning it on fix the issue? I use Sleep as Android for sleep tracking and turn Ambient off and it lights up here and there at night.
Click to expand...
Click to collapse
Try turning ambient mode ON during the day,
I just tested and with it off the screen does occasionally come on at full brightness even in the dark. With ambient on it only comes on bright the first time, quickly dims, and stays dim until taken into daylight :good:
v3ngence said:
Try turning ambient mode ON during the day,
I just tested and with it off the screen does occasionally come on at full brightness even in the dark. With ambient on it only comes on bright the first time, quickly dims, and stays dim until taken into daylight :good:
Click to expand...
Click to collapse
Interesting. So with ambient ON, it still turn on at full brightness but momentarily. I'll test this and will report back.
Well, I'm having the opposite problem following the last update.
it frequently (at work right now, for example) comes up EXTREMELY dim, I'd guess maybe 5x dimmer than brightness setting '1'.
I'm setting it to '1' as a workaround for now.
- Frank
Wait for the next 5.0 update. .there's options like theater mode. ..and other brightness modes coming to wear
Sent from my SM-N910C using Tapatalk 2
Smart Brightness for Moto 360
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.
[email protected] said:
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.
Click to expand...
Click to collapse
Instant buy. Thanks allot, that makes in combination with the 5.0 update, Watchmaker and Bubble Cloud Launcher my watch perfect.
[email protected] said:
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.
Click to expand...
Click to collapse
Sadly, the auto brightness doesn't seem to work...yeah, just realized that after using it for a week.
Smart Brightness for Moto 360
TheGoD said:
Sadly, the auto brightness doesn't seem to work...yeah, just realized that after using it for a week.
Click to expand...
Click to collapse
The application really works. If you want see how works, do the followings steps:
1. open Smart Brightness App
2. Turn on the application
3. Set the minimum brightness to 20%
4. Turn on the auto brightness.
5. Go to a dark room and wait until Moto360 to turn off the screen.
6. Touch the screen to wakeup the screen. (This is necessary because the Smart Brightness application start when the screen is on and stop when the screen is off).
You will see a clear image after this steps. Now go to the smart brightness app and turn it off (Using the on/off switch located at the top of the screen). Repeat the steps 5 and 6. Now the screen will look dark, because it is the factory auto brightness.
I recommend to use the 7 days trial. After 7 days after using it you will notice the difference.
I'm using this app over a month and works fine. Please let me know any other concern about the application.
For me its not the low light the problem as this works, is outside doens't go bright enough in direct sunlight
Enviado do meu HTC One através de Tapatalk
no problems
i have always used it, never experienced any problems
Moto 360 on the second generation does not work
Fabio
So after messing around with a few suggestions of people who did this accidentally. I have been able to repeat it every night.
1. Put the phone on the charger with ambient mode on or off doesn't matter.
2. Go into android wear app on your phone.
3. When the watch face has dimmed on the charger switch ambient mode on,(using the phone) the screen with go bright again then it will dim. Once it has dimmed wait 5 seconds and turn ambient mode to off. The screen should now turn off on the watch.
4. If you put it on the charger with ambient mode enabled wait for it to dim, wait 5 seconds then switch ambient mode off. If the face doesn't turn off you are now able to start at step 3 so that's why it didn't matter how you started.
This is the first time I've had something to contribute, so let me know how it works for you. I'll post a video when I get home, unless someone beats me to it. My build is KGW42R if that makes a difference.
This was posted before, but thanks for the contribution.
I'm hoping they eventually put an option in the settings to auto disable display while charging.
Andromjb said:
This was posted before, but thanks for the contribution.
I'm hoping they eventually put an option in the settings to auto disable display while charging.
Click to expand...
Click to collapse
Ah, my bad. Last I had seen it was a few pages into a thread. Well nobody should have to ask the question on how to I suppose. You have two sources lol
Anyone know how to automate this using tasker? Or some shell script?
Sent from my SM-N750 using XDA Free mobile app
for me, after i do this, screen turns off... but eventually in the night, the watch turns back on, i think when my phone does some kinda of check or gets a notification, the watch turns back on... so for me its useless..
Even if the screen is off all night is it safe to leave it on charge all night, especially as it is fully charged after 2 hrs? I've only had my watch since Monday so still figuring out the best practice but I've been charging it for a bit in the evening before heading off to sleep, completely turning it off and then in the morning while getting ready just putting it on the charger to a) turn on and b) charge fully.
I know in the manual it says that it has smart technology to protect it against overcharging but does it not stay hot all night on the cradle?
I would not recommend putting it on charge overnight with the back getting hot and the plastic back being crack prone
Sent from my GT-N7100 using Tapatalk 2
Thank you for this. Will come in handy when my Moto 360 arrives sometime next week.
pakure said:
I would not recommend putting it on charge overnight with the back getting hot and the plastic back being crack prone
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Non-issue. The back barely gets hot and even if it does just don't pull on the strap to the point that it causes pressure. Or simply take it off the charger for a minute before putting it on. It's not like its getting hot enough to melt the plastic. You can most definitely charge it overnight without a problem.
I've been doing this since I got the watch but last night after I installed the update the trick won't work. I go through the entire process and all goes like normal, but about 10 seconds after the screen shuts off, the backlight turns on. Anyone else having this issue?
nick.XIII said:
I've been doing this since I got the watch but last night after I installed the update the trick won't work. I go through the entire process and all goes like normal, but about 10 seconds after the screen shuts off, the backlight turns on. Anyone else having this issue?
Click to expand...
Click to collapse
I've noticed the backlight is on but it's still black. I guess at least it reduces the chance of the graphics getting stuck.
Sent from my XT1096 using XDA Free mobile app
New update installed and the trick still works. No backlight just screen off.
I noticed that i dont have to be accurate and time 5-10 seconds after screen fades. It works anytime after the screen faded.
Anyway, thanks for the great tip!! :good:
nick.XIII said:
I've been doing this since I got the watch but last night after I installed the update the trick won't work. I go through the entire process and all goes like normal, but about 10 seconds after the screen shuts off, the backlight turns on. Anyone else having this issue?
Click to expand...
Click to collapse
I actually am having this issue. I usually turn off bluetooth on my phone right away, but the watch seems to continue to turn back on with the black screen only, which happened to drain my battery and make the watch really hot. Kinda strange.
This works for me without any issue, even after the last update from yesterday.
I just put the watch on the charger, then from the phone I set the Ambient Mode to ON, then to OFF and the screen turns off.
But here is the trick that I have noticed: you MUST have no light in the room, or cover the watch screen while doing the procedure. If there is light in the room, it won't work ! I accidentally discovered this.
There is also a build.prop edit in the development forum that allows you to change a line and when the watch is put on the charger, it does it automatically.
If you don't want to root your watch and you have a rooted phone, I made an app that does the button pressing for you
So the option to turn off the Display on Charger (Developer Menu) is not fixed?
Not to my knowledge.
abuttino said:
There is also a build.prop edit in the development forum that allows you to change a line and when the watch is put on the charger, it does it automatically.
If you don't want to root your watch and you have a rooted phone, I made an app that does the button pressing for you
Click to expand...
Click to collapse
Hi can you share the app pls thank you?
Sent from my SM-N750 using XDA Free mobile app
---------- Post added at 02:45 PM ---------- Previous post was at 02:41 PM ----------
I noticed the trick using the ambient setting works does turn off the display immediately but after a while ( not sure how long) the back light comes back. You see a faint back light with screen not nothing showing anything. Can only see this in pitch black at night all lights off
Anyone see the same behaviour?
Sent from my SM-N750 using XDA Free mobile app
https://plus.google.com/109468208780802399420/posts/fZ2YkEkH7aT
The app that will do the same actions
With the latest update, this method doesn't work anymore. The screen will always turn on with a black screen after a couple of seconds. I don't think I will be charging it overnight anymore and just wait to charge it in the morning while getting ready.
Wish moto would give us an option to use nightstand mode or not. Even when dimmed it's still bright while sleeping.
Notice there're like two types on how people use their Moto 360.
1) Ambient Mode: on - Tilt to wake screen: off
Can always see the watchface, backlight light up by touching/interaction.
2) Ambient Mode: off - Tilt to wake screen: on
Tilt will turn on the screen with backlight. Nothing if it doesn't.
Which are you? and why?
philippecr said:
Notice there're like two types on how people use their Moto 360.
1) Ambient Mode: on - Tilt to wake screen: off
Can always see the watchface, backlight light up by touching/interaction.
2) Ambient Mode: off - Tilt to wake screen: on
Tilt will turn on the screen with backlight. Nothing if it doesn't.
Which are you? and why?
Click to expand...
Click to collapse
Unless my watch is defective and everything I've read is wrong, the face on a Moto360 will never always stay on, even when tilt to wake screen is off (I just tried it to confirm). Turning ambient mode on and tilt to wake screen off only makes it so you have to tilt to get the ambient mode screen.
But to answer the question, I'm neither. I have ambient mode on and tilt to wake screen on. I use this configuration because I want my watch to behave like a normal watch, and I don't want to have to touch it to see the time. I also want the screen to be on as much as possible because sometimes I hold my arm at an angle that isn't detected as a true "tilt" by the watch, and I want to be able to check the time despite this.
I have tilt to wake on and ambient off because I dont want touse more battery by keeping ambient on but I also want to be able to view the time without having to touch the screen or button.
TheSt33v: u had both of them on? How is the battery life?
I have them both OFF. I found out tilt to wake off extends my battery live tremendously. But I miht be a special case since I drive for living and the watch wakes up way too often.
I'd welcome some kind of "custom calibration" for cases like this and also it would be nice, if the screen would turn off IMMEDIATELY after you move the watch away from face.
I miss voted - I have both OFF (not on).
I like to tap or hit the button to see it. Otherwise it is on virtually all the time with my hands moving so much for work.
The the new app wod i kight turn mine into a boost gauge ....lol
Sent from my HTC One_M8 using XDA Free mobile app
philippecr said:
TheSt33v: u had both of them on? How is the battery life?
Click to expand...
Click to collapse
I's fine. I charge it overnight, and it's usually 20-30% by the time I go to bed.
until today I used all OFF, but after seeing this post I decided to try with Ambient Mode ON and Tilt to wake OFF.. I'll post later on the battery life comparaison in my case. I'm surprised to see the screen go black when not moving the watch at all even with ambient mode ON.
It's clear, I don't like to use tilt to wake, because of the 1sec lag when I move my wrist to see the time, hate it to feel like I didn't move it correctly even if I did.
I just found out from this thread that it is possible to disable the tilt to wake up gesture. Thanks OP !
Stupidly, you can't find this in watch settings, only in Android Wear app's settings.
For me, tilt to wake up disabled and ambient mode enabled looks like the best combination and battery life seems to be the same or better than with the defaults (Ambient off and tilt to wake up on), especially when driving.
Jungleman_ said:
until today I used all OFF, but after seeing this post I decided to try with Ambient Mode ON and Tilt to wake OFF.. I'll post later on the battery life comparaison in my case. I'm surprised to see the screen go black when not moving the watch at all even with ambient mode ON.
It's clear, I don't like to use tilt to wake, because of the 1sec lag when I move my wrist to see the time, hate it to feel like I didn't move it correctly even if I did.
Click to expand...
Click to collapse
This is how I use mine. Ambient ON, Tilt OFF.
Tilt to wake lag's really bad.
Ambient ON means I can always see the time, like a real watch.
Talking to my watch is the daggiest thing in the world, so I would always touch it anyway to activate a task.
Battery:
40-30% left when I got to bed. Turn watch OFF.
Put on charge while I get ready for work in the morning. 95-85% 20 mins later when I leave.
Happy days....
michael_or said:
This is how I use mine. Ambient ON, Tilt OFF.
Ambient ON means I can always see the time, like a real watch.
Battery:
40-30% left when I got to bed. Turn watch OFF.
Put on charge while I get ready for work in the morning. 95-85% 20 mins later when I leave.
Happy days....
Click to expand...
Click to collapse
I take it you still have to lift the watch to see the ambient mode (watchface) since the Moto 360 screen always goes off when you move your arm down?
SirDigitalKnight said:
I take it you still have to lift the watch to see the ambient mode (watchface) since the Moto 360 screen always goes off when you move your arm down?
Click to expand...
Click to collapse
Yep, but, when my arm is down, I cant see my watch anyway!
Even with an analogue watch I would need to point it toward my face to read it.
I find the moto360 is pretty good at guessing whether I'm looking or not. With my arm resting on the desk/keyboard as I type this, my ambient watchface is on and I can read it by glancing down, no watch movement required.
I'm pretty happy with the battery life I'm getting in this mode.
michael_or said:
Yep, but, when my arm is down, I cant see my watch anyway!
Even with an analogue watch I would need to point it toward my face to read it.
I find the moto360 is pretty good at guessing whether I'm looking or not. With my arm resting on the desk/keyboard as I type this, my ambient watchface is on and I can read it by glancing down, no watch movement required.
I'm pretty happy with the battery life I'm getting in this mode.
Click to expand...
Click to collapse
Agreed, I am liking the same settings on mine. Only 2 weeks with the watch so I still have to play some more but 11 hours into my watch use for the day and I am still at 59%!
I use tilt on and ambient off because i don't want use more battery when it not use.
Thanks for all the tips! I just ordered a Moto 360 myself and I plan on enabling Ambient Mode and disabling the tilt to display mode. If I plan on actually using my watch for a task I'm most likely going to tap on the screen anyway rather than tilting my wrist, and battery life will most likely be the same.
Soooo.
My watch just updated to the newest Android Wear version.
Now it seems my Ambient Mode leaves the screen on, regardless of angle!
It will be interesting to see how this effects my battery life!...!...!
I keep it all on.
I find both too useful to keep off.
michael_or said:
Soooo.
My watch just updated to the newest Android Wear version.
Now it seems my Ambient Mode leaves the screen on, regardless of angle!
It will be interesting to see how this effects my battery life!...!...!
Click to expand...
Click to collapse
I thought I was crazy but I just noticed this today. It turns out that ambient on and tilt to wake off leaves ambient always on. If you activate tilt to wake, the ambient screen turns off when facing out away from you or down. So tilt off, ambient on is what I'm going to try tomorrow to see how battery life is. The only thing I miss is the OK Google command just by raising my wrist.
Sent from my LG-D631 using XDA Free mobile app
is there any way to keep screen ALWAYS ON in ambient mode ???
No, but why would you want to. It's on when you look at it.
Faspaiso said:
No, but why would you want to. It's on when you look at it.
Click to expand...
Click to collapse
Got the "interactive watchfaces" (LCA44B) update yesterday. Ever since then ambient screen is always on. Which really irritates me. I have to agree, no need to stay on if I'm not looking at it. Anyone with the same issue after the update?
Faspaiso said:
No, but why would you want to. It's on when you look at it.
Click to expand...
Click to collapse
I can't tell if people who say this are just really forgiving or liars.
thebobmannh said:
I can't tell if people who say this are just really forgiving or liars.
Click to expand...
Click to collapse
Well explain. If Ambient Screen is on, but watch is ON EVERY time I look at it. A thing I don't understand tho, is that while it's a LCD display, it saves zero power by making half the screen black with digital clock on so many watchfaces.
Faspaiso said:
Well explain. If Ambient Screen is on, but watch is ON EVERY time I look at it. A thing I don't understand tho, is that while it's a LCD display, it saves zero power by making half the screen black with digital clock on so many watchfaces.
Click to expand...
Click to collapse
I've played with ambient mode, and I can conclusively say that my watch face is not "on" EVERY time I look at it. Not even close. I work at a computer all day, if I glance down at my watch while it's in ambient mode, it isn't on. I drive, and I look at my wrist, and my watch is often NOT on. I understand that it turns on more easily and tries to anticipate hwen you're trying to look at your watch, but if you're casually glancing at the watch hoping it's on (rather than moving your wrist), it's often off. That's not ambient, it's just.... more sensitive.
As for your second question, only certain LCD technologies can leverage making "half the screen black" as a power-saving measure. Basically... most LCDs still use a single light source, so regardless of how much of the screen is black, the backlight is fully on. Some LCD technologies have the ability to turn on smaller backlights directly behind certain parts of the screen, so lighting only a small area of the screen is possible and saves a lot of power. I don't know enough about the technologies to know why, aside from cost, one would choose one over the other.
princehpk said:
is there any way to keep screen ALWAYS ON in ambient mode ???
Click to expand...
Click to collapse
Go to android wear and settings/moto 360 and click on ambient screen on and tilt to wake screen to off. This will keep ambient on all the time. The only down side is that you will have to manually click the screen or the power button to go to full screen. I hope that helps
Sent from my LG-H815 using Tapatalk
wuilly said:
Go to android wear and settings/moto 360 and click on ambient screen on and tilt to wake screen to off. This will keep ambient on all the time. The only down side is that you will have to manually click the screen or the power button to go to full screen. I hope that helps
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
I already knew this but decided to give you a thanks since no one else has and you correctly answered the question along with how to activate it.
Can anyone help confirm if they see this behavior with their watch? I have always-on screen set to ON in the Android Wear app. (Tilt to wake and gestures are both OFF.) I have noticed that even on the stock Moon Phase face, if I don't touch the face for a while, the watch goes to sleep. By that I mean, the face is completely black, as if I turned off the always-on screen option.
I haven't determined yet if it's always after a specific amount of time. Seems to be at least 30 min, maybe an hour.
Is this normal behavior? I was under the impression that always on means always on, And that time in dim mode would always show.
You are correct.
bailyc said:
Can anyone help confirm if they see this behavior with their watch? I have always-on screen set to ON in the Android Wear app. (Tilt to wake and gestures are both OFF.) I have noticed that even on the stock Moon Phase face, if I don't touch the face for a while, the watch goes to sleep. By that I mean, the face is completely black, as if I turned off the always-on screen option.
I haven't determined yet if it's always after a specific amount of time. Seems to be at least 30 min, maybe an hour.
Is this normal behavior? I was under the impression that always on means always on, And that time in dim mode would always show.
Click to expand...
Click to collapse
You are correct, always on means always on, the only time the watch should sleep, is when you have it on the charger. You may have a bad install or worst case scenario a bad watch.
vvveith said:
You are correct, always on means always on, the only time to watch should sleep, is when you have it on the charger. You may have a bad install or worst case scenario a bad watch.
Click to expand...
Click to collapse
Ok, thanks for confirming! I definitely have something wrong, then. I've factory reset several times and even taken off most apps, and it still happens. Looks like it might be the watch.
I have similar problem - always ON, gestures off, but after about 10 seconds it changes watchface to some dark/black one.
I believe the Always on Feature is not for having your watch face on all the time, but rather it dims your watch face but you still can tell the time with just the darker screen. It's not going to keep your watch face fully lit if that option is turned on.
Well, then I`m selling mine. Why would I want all them beautiful watchfaces if I can`t have them always on?! That`s just stupid.
rbs_uk said:
Well, then I`m selling mine. Why would I want all them beautiful watchfaces if I can`t have them always on?! That`s just stupid.
Click to expand...
Click to collapse
Most of the folks that make the WatchMaker faces either just dim the face, or they make a dimmed mode face that looks like it has phosphorous markings. I personally make custom dimmed modes. My favorite method is to make a blood red version of the face with just the essential features. The moon phase ones can look BAD ASS with the blood red moon phase on a pure black background. This is the only watch I have ever actually gotten comments on in public. When people see it they notice that it ain't no normal watch, and it ain't no Apple watch.
rbs_uk said:
Well, then I`m selling mine. Why would I want all them beautiful watchfaces if I can`t have them always on?! That`s just stupid.
Click to expand...
Click to collapse
I think the battery life would just be too short if you left the face on all the time, all the time meaning the watch never went into dim mode. Just run tilt on, and don't wear the watch to loose. Especially at night if the watch never dimmed that would get annoying as hell it's so bright.
'god guys, really????
rbs_uk said:
I have similar problem - always ON, gestures off, but after about 10 seconds it changes watchface to some dark/black one.
Click to expand...
Click to collapse
Come on guys you do understand ambient mode right? When the main screen of the watch face shuts down it goes into ambient mode, which is simply black and white. Just like any pure android device. (i.e. Nexus 6) If you do not understand of know of this behaviour please stop posting and do some research. 'The watch is acting as it is suppose to in Android Wear. Just like notifications on a Nexus device. Google is your friend.
So is YouTube and understanding the android system as of today. Come on, get a clue.
Yeah I think if it was on all the time you'd be lucky to get even a few hours of battery life out of it....
falcon26 said:
Yeah I think if it was on all the time you'd be lucky to get even a few hours of battery life out of it....
Click to expand...
Click to collapse
Well, I know what I personally thought was confusing is that "always on" isn't actually always on when charging. When on the charger, display turns off completely after a time. That's different behavior from what I'm used to based on the Moto X, which has AMOLED and still displayed ambient information on the screen when charging/docked. I find it a little odd that there is no built-in charging/docked display that uses the ambient (dimmed) display mode.
But to be sure, my watch definitely had something wrong with it. I just received a replacement unit yesterday, so I'll be testing it out today to see if it's able to stay dimmed as it should when off the charger.
Be attencion with "always on" mode, this is screen after four days (contrast on level 3).
I've had the "Ranger" watch face on with a full colour ambient mode and not experiencing any burn-in. Every minute it shifts the image somewhat in order to reduce any burn in effect. See https://play.google.com/store/apps/details?id=co.smartwatchface.watch.face.ranger.military .
Just to cease any confusion. Always On means the screen is always on. After a few seconds, the screen will dim and go into a black/white ambient mode to reserve power.
The OP says his screen is turning completely off. So it seems there is a problem there. Every Watch face has a different ambient mode. Perhaps the one you are using has a broken ambient mode and not displaying data.
I found the best way to make a watch face is to build one yourself. Purje Black is awesome for this (truely amazing app). I am not going to do a full review but the transition between full on and ambient mode is animated, looks fantastic, has lots of Hotspots to launch various apps like weather, Google Fit data, etc, and displays it in a awesome format.
But the best feature is that you can customize the ambient mode separately from the actual face. They also support community made themes, so just browse their Google Plus theme page, find one you like, customize it to how you want it and save it.
Just be careful with your AMOLED screen that you don't have any information that is static in ambient mode, like numbers, hour marks, etc. I prefer a Digital clock/Calendar date on my Amoled, but have a nice looking analog with various information on my full face.
The device going to sleep is normal. It will go from full on to ambient mode and from there if the watch isn't moved for 30 minutes it will shut the screen off. See below from Google.
"You can set the display to show the time or turn off completely when you're not using the watch. If set to turn off, the screen will turn on when you turn your wrist or touch the screen.*
Tip: Letting your screen turn off when you're not using the watch will help improve battery life. If the watch hasn't moved for 30 minutes, the screen will turn off even if you have it set to remain always on. To wake your watch, tilt it or press the power button."
Sent from my Nexus 6 using Tapatalk
Hi
I'm trying to find an App for my watch that will keep the Watchface in Ambient mode for as long as i like (more than 24Hrs) even when it's not on my hand (not being moved).
Any ideas would be appretiated.
ausi said:
Hi
I'm trying to find an App for my watch that will keep the Watchface in Ambient mode for as long as i like (more than 24Hrs) even when it's not on my hand (not being moved).
Any ideas would be appretiated.
Click to expand...
Click to collapse
First off between the battery hit and possible screen damage I wouldn't recommend that. But I haven't seen any faces or apps that would accomplish this. And since that feature is inherent to wear it would probably take root to accomplish it anyway.
Sent from my Nexus 6 using Tapatalk
crawrj said:
First off between the battery hit and possible screen damage I wouldn't recommend that. But I haven't seen any faces or apps that would accomplish this. And since that feature is inherent to wear it would probably take root to accomplish it anyway.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thanks, i have root..........but still cannot find an App to do this, i still would like to try.
Ho about limiting brightness to lower level than level 1. While I,m not using watch, just before it goes to ambient, I can See brightness dimmed to lower than minimum and after, ambient turns on, whitch is brighter. What can i do to use lowest levels all the time?
Stay Lit Wear
In case you haven't found it yet, search Google Play for "Stay Lit Wear."