how many of u need the Official LG E975 4.4.2 ROM?
i have downloaded it somehow...a 980mb kdz file. and it works. its a U.S ROM.
:victory:
one more thing if anyone is interested..
lemme know t best site for uploading the kdz file..
or might hav to do as googledrive or dropbox or box
i'd like to try please.
you can use mega.co.nz or google drive.
If I flash SFR Rom on my GF E977-it will be sim locked ? I ask that because it's the only Rom with LTE band 2600 mhz that I could donload from lg phone firmware. There's some way to flash modem without custom recovery ?
I'm a Brazilian without English Course, sorry and be comprehensive
Yes please. Google drive would probably be the easiest upload. Then go to "share" and share with anyone that has the link. They will give you a link, post that in your OP.
Related
i saw a P936 loaded with V10e rom/baseband at a telco/lg roadshow few days back (didnt have the opp to snap a pic), can anybody with a P936 on hand try and see if such a thing exist on LG's server?
if yes, is it possible to download the kdz and extract the baseband/firmware?
there is a simple tool to check for latest software download if one has a P936 on hand - http://forum.xda-developers.com/showthread.php?t=1073827
(enter your imei or serial, if serial, make sure caps are used when applicable)
i m holding a P930 but in Asia atm, therefore would like to give the most updated P936 baseband/firmware a go (am using v10c now)
many thanks!
potatohead said:
i saw a P936 loaded with V10e rom/baseband at a telco/lg roadshow few days back (didnt have the opp to snap a pic), can anybody with a P936 on hand try and see if such a thing exist on LG's server?
if yes, is it possible to download the kdz and extract the baseband/firmware?
there is a simple tool to check for latest software download if one has a P936 on hand - http://forum.xda-developers.com/showthread.php?t=1073827
(enter your imei or serial, if serial, make sure caps are used when applicable)
i m holding a P930 but in Asia atm, therefore would like to give the most updated P936 baseband/firmware a go (am using v10c now)
many thanks!
Click to expand...
Click to collapse
Hi Potatohead, this is Alex from Hong Kong and a P936 user. Just did what you requested however I cannot reply within the same thread (probably because of my junior status?) Anyway... tested with my S/N and it shows the latest firmware is V10_d
Hope it helps
903idcop said:
Hi Potatohead, this is Alex from Hong Kong and a P936 user. Just did what you requested however I cannot reply within the same thread (probably because of my junior status?) Anyway... tested with my S/N and it shows the latest firmware is V10_d
Hope it helps
Click to expand...
Click to collapse
thanks, will do my best to find a P936 and see if I can grab the V10e off LG's server. Will upload if I can get it.
Found it!
Pls proceed to the thread below to download:
http://forum.xda-developers.com/showthread.php?p=30081933#post30081933
potatohead said:
Found it!
Pls proceed to the thread below to download:
http://forum.xda-developers.com/showthread.php?p=30081933#post30081933
Click to expand...
Click to collapse
Thanks for this useful post, do you notice any difference between the V10C and V10e baseband/firmware?
Alex
P936 UPDATE BUT ALL IS 2.3
Hongkong update to 10E
DOWNLOAD:http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP936/AHKGBK/V10e_00/V10E_00.kdz
Singapore update to 10F
DOWNLAD:http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP936/ASITBK/V10f_00/V10F_00.kdz
other 2.3 kdz download:http://kuai.xunlei.com/d/PIRICCLBMWIU
cant download v10f
We had the V10f in Europe like 2 months ago. It changes absolutely nothing excpet Vodafone apps being preinstalled and can't be deleted.
yeap, SG 10F can‘t download...sorry
yes，2.3 don't have absolute diffence. just language is diffent
navik said:
other 2.3 kdz download:http://kuai.xunlei.com/d/PIRICCLBMWIU
Click to expand...
Click to collapse
I dont know chineese language! Cant download.
Quote:
Originally Posted by navik
other 2.3 kdz download:http://kuai.xunlei.com/d/PIRICCLBMWIU
I dont know chineese language! Cant download.
Unfortunately, I badly speak english. Sorry.
which one do you need? how can give you?
V1F_00.kdz_Portual 310.57MB it new firmware? Please upload it to other share
For example www.multiupload.com or Google Drive
sorry,I didn't flash it.Now you can download:
V1F_00.kdz_Portual 310.57MB
Hi,
I am not sure if this question has been asked before as I could not find anything similar here. If it has already been asked, then I would request the moderators to please point me there.
I have an AT&T Optimus G Pro (E980). It was running the stock rom (AT&T E980AT V10g). I then flashed the value pack from AT&T (AT&T E980AT V10k) which I downloaded by following the download link provided in thread http://forum.xda-developers.com/showthread.php?t=2438088
The flashing tool I used is the one that required the .tot file and the .dll file. Flashing was a success.
I found the value pack 10k to be laggy compared to the stock 10g. So, I wanted to try out a new rom and flashed a Korean one (SKT/SK TELECOM(KOREA) F240S V10w). I did that using the flash tool and the kdz file given in the same thread as stated above. Flashing was a success.
Now, I want to return again to the AT&T stock (AT&T E980AT V10g). But, when I am using the .tot file and the .dll file, the flashing tool is showing an error something about the device model being different and that I should check the .tot and .dll file. I cannot paste the exact error message right now as I am not at my desk but I can paste it later, if required.
Do I need to have a kdz file of the stock to carry out the flashing ? If yes, then where to find it as the stock firmware thread in this forum lists only the zipped up .tot for the AT&T stock rom.
Else, do I need a .dll for the F240S model and then use it along with the stock E980AT firmware to flash ? If yes, then where can I find the .dll file ?
Thanks for taking the time to read this post and thanks for helping out This can serve as a reference to someone who is looking for the same answer.
Regards.
sandyiscool said:
Hi,
I am not sure if this question has been asked before as I could not find anything similar here. If it has already been asked, then I would request the moderators to please point me there.
I have an AT&T Optimus G Pro (E980). It was running the stock rom (AT&T E980AT V10g). I then flashed the value pack from AT&T (AT&T E980AT V10k) which I downloaded by following the download link provided in thread http://forum.xda-developers.com/showthread.php?t=2438088
The flashing tool I used is the one that required the .tot file and the .dll file. Flashing was a success.
I found the value pack 10k to be laggy compared to the stock 10g. So, I wanted to try out a new rom and flashed a Korean one (SKT/SK TELECOM(KOREA) F240S V10w). I did that using the flash tool and the kdz file given in the same thread as stated above. Flashing was a success.
Now, I want to return again to the AT&T stock (AT&T E980AT V10g). But, when I am using the .tot file and the .dll file, the flashing tool is showing an error something about the device model being different and that I should check the .tot and .dll file. I cannot paste the exact error message right now as I am not at my desk but I can paste it later, if required.
Do I need to have a kdz file of the stock to carry out the flashing ? If yes, then where to find it as the stock firmware thread in this forum lists only the zipped up .tot for the AT&T stock rom.
Else, do I need a .dll for the F240S model and then use it along with the stock E980AT firmware to flash ? If yes, then where can I find the .dll file ?
Thanks for taking the time to read this post and thanks for helping out This can serve as a reference to someone who is looking for the same answer.
Regards.
Click to expand...
Click to collapse
Okay, I know exactly what your talking about!!, You have TWO Options!
1. (Easist) Change your Build Prop to be an E980 on your current rom and then try it
2. Flash the Telcel or Panama KDZ on your phone using LG Flashtools , and THEN flash the AT&T Version. That`s what I have had to do.
Heres a Guide in case you did not know http://forum.xda-developers.com/showthread.php?t=2420219 for flashing the Panama or Telcel rom.
hyelton said:
Okay, I know exactly what your talking about!!, You have TWO Options!
1. (Easist) Change your Build Prop to be an E980 on your current rom and then try it
2. Flash the Telcel or Panama KDZ on your phone using LG Flashtools , and THEN flash the AT&T Version. That`s what I have had to do.
Heres a Guide in case you did not know http://forum.xda-developers.com/showthread.php?t=2420219 for flashing the Panama or Telcel rom.
Click to expand...
Click to collapse
Hi,
Thanks for showing the way. I am currently on the Telcel rom and everything is working perfect, though I dislike the bloatware in this rom, be it as less as it is
I wonder if you can help with the following questions :
1) What is the difference between the Panama and Telcel (Mexico) Roms ? I assume both are based on E980H but Telcel should have more bloatware, as it is from a carrier. How much bloated is the Panama Rom ?
EDIT : Got the exact answer for the above question in thread http://forum.xda-developers.com/showthread.php?p=45722192&postcount=1
Panama rom is almost the same as Telcel's, but without the extra bloatware. I am definitely going to flash this one
2) I am from India. So I tried out flashing the India Rom (E988). Though the flashing was successful, there was no mobile operator network. Is this because of some baseband/modem mismatch issue ?
3) Would you happen to know which all roms are fully working on AT&T E980 devices that will work in India. I have tried out the Korean F240S and Telcel roms and both do work.
sandyiscool said:
Hi,
I am not sure if this question has been asked before as I could not find anything similar here. If it has already been asked, then I would request the moderators to please point me there.
I have an AT&T Optimus G Pro (E980). It was running the stock rom (AT&T E980AT V10g). I then flashed the value pack from AT&T (AT&T E980AT V10k) which I downloaded by following the download link provided in thread http://forum.xda-developers.com/showthread.php?t=2438088
The flashing tool I used is the one that required the .tot file and the .dll file. Flashing was a success.
I found the value pack 10k to be laggy compared to the stock 10g. So, I wanted to try out a new rom and flashed a Korean one (SKT/SK TELECOM(KOREA) F240S V10w). I did that using the flash tool and the kdz file given in the same thread as stated above. Flashing was a success.
Now, I want to return again to the AT&T stock (AT&T E980AT V10g). But, when I am using the .tot file and the .dll file, the flashing tool is showing an error something about the device model being different and that I should check the .tot and .dll file. I cannot paste the exact error message right now as I am not at my desk but I can paste it later, if required.
Do I need to have a kdz file of the stock to carry out the flashing ? If yes, then where to find it as the stock firmware thread in this forum lists only the zipped up .tot for the AT&T stock rom.
Else, do I need a .dll for the F240S model and then use it along with the stock E980AT firmware to flash ? If yes, then where can I find the .dll file ?
Thanks for taking the time to read this post and thanks for helping out This can serve as a reference to someone who is looking for the same answer.
Regards.
Click to expand...
Click to collapse
sandyiscool said:
Hi,
Thanks for showing the way. I am currently on the Telcel rom and everything is working perfect, though I dislike the bloatware in this rom, be it as less as it is
I wonder if you can help with the following questions :
1) What is the difference between the Panama and Telcel (Mexico) Roms ? I assume both are based on E980H but Telcel should have more bloatware, as it is from a carrier. How much bloated is the Panama Rom ?
EDIT : Got the exact answer for the above question in thread http://forum.xda-developers.com/showthread.php?p=45722192&postcount=1
Panama rom is almost the same as Telcel's, but without the extra bloatware. I am definitely going to flash this one
2) I am from India. So I tried out flashing the India Rom (E988). Though the flashing was successful, there was no mobile operator network. Is this because of some baseband/modem mismatch issue ?
3) Would you happen to know which all roms are fully working on AT&T E980 devices that will work in India. I have tried out the Korean F240S and Telcel roms and both do work.
Click to expand...
Click to collapse
Well as for Living in India Flashing a local rom does not always mean it will be better. As the device you have is meant to be in America meaning the India rom is pretty much gonna have its issue. I only recomend the Telcel or panama roms for the E980
This might be a noob question, how can I tell which version of e988 I have? I have a optimus g pro that I got from doha Qatar, trying to flash back to stock with lg flash tool, I need to find out which version of the e988 I have so that I can download the correct files. Another question is that no matter when I was on stock or with custom Rom, I am not able to get the speed pass edge. Does my phone not have the T-Mobile 3g/lte frequencies? Is that why I'm stuck on edge speed with tmobile network? Help please, thanks in advance.
You will need to use e980 in the US to get 3G/4G speeds on TMobile or ATT. E988 does not support the necessary frequency bands for US carriers. If you can exchange it do it.
Sent from my N550JV using Tapatalk
No wonder I couldn't get any 3g/4g speed..... it's little too late for the exchange, would you tell me how I can tell which version of e988 I.have so that i can download the right files.
jdaclutch said:
This might be a noob question, how can I tell which version of e988 I have? I have a optimus g pro that I got from doha Qatar, trying to flash back to stock with lg flash tool, I need to find out which version of the e988 I have so that I can download the correct files. Another question is that no matter when I was on stock or with custom Rom, I am not able to get the speed pass edge. Does my phone not have the T-Mobile 3g/lte frequencies? Is that why I'm stuck on edge speed with tmobile network? Help please, thanks in advance.
Click to expand...
Click to collapse
I have a usefull link but i can't post it i'm new user
mhd.abbas.94 said:
I have a usefull link but i can't post it i'm new user
Click to expand...
Click to collapse
here the second post http://forum.xda-developers.com/showthread.php?t=2403436 gives you the link. Just paste into the browser with your IMEI at the end, and youll download the correct kdz file for your phone.
http://forum.xda-developers.com/showpost.php?p=44575856&postcount=2
Hi, I'm from Romania and everytime I check for new firmware in settings it doesn't find anything. Has anyone updated his V490 to lollipop? Any idea how to get the kdz file to update manually?
spam1408 said:
Hi, I'm from Romania and everytime I check for new firmware in settings it doesn't find anything. Has anyone updated his V490 to lollipop? Any idea how to get the kdz file to update manually?
Click to expand...
Click to collapse
try using lg pc suite.
to see if there a kdz for ur variant and country follow this link (but change "XXXX" to ur imei/csn, check it under settings/hardware info):
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=XXXX
then follow the link below this line to download the kdz: <sw_url>
Thanks, for me shows version V49010B_00, so I guess I'll have to wait a little more because it's bought from Orange and it will surely take a long time. Can you provide the lollipop kdz link for your region so I could flash it manually?