Related
Has anyone heard about new cases available for the HTC Desire.
I've had a case from Dragonfly for a while, but it has started cracking now and I fancy something new.
Has anyone got a good suggestions?
search for GEL cases off ebay.
Haven't got a desire, but got one on my Hero and it looks fantastic.
Don't get RUBBER or SILICONE, they're weak!
I've done a bit of research and I think I might look in to a Case-Mate case.
Has anyone had one before.
I don't want it to crack like me current has...
I agree with DDotPatel
I have used used gel cases on basically all of my phone and I have never had an issue with them, the protection they provide is great, and its not too thick either.
joehankin said:
I've done a bit of research and I think I might look in to a Case-Mate case.
Has anyone had one before.
I don't want it to crack like me current has...
Click to expand...
Click to collapse
Which one, there's a few different ones. They selling the gel ones for $15,... WTH.
Ebay gel cases, cheap as chips!
The gelli range of cases from case-mate seem to be good value.
I have seen them on sale for about £14.99...
hello..My old case start cracking and i like to buy new case for my HTC that is stylish and attractive...i search a lot but i am unable to find case of my choice..please anyone know about any website that provide stylish and good looking cases
avery_chen26 said:
My friend recommend me PDair cases, and I also see lots of good comments from the forums. Just placed an order yesterday, and hope to recieved it soon.
Click to expand...
Click to collapse
Agree. They have very good comments in Amazon.
Personally I am not a great fan of bulky case so I like something lightweight and slim back cover and gives basic protection.
Ordering 2 of these plus postage is roughly $10 from NeTimes
Hi, I was wondering if anyone knew of a good flip cover for the one? I would like one with the stand feature.
Comet1966 said:
Hi, I was wondering if anyone knew of a good flip cover for the one? I would like one with the stand feature.
Click to expand...
Click to collapse
I would stay away from the htc one cover, the phone just falls out at times by itself. There is a few heavy duty cases which offer the stand feature but they cost around £5 and not sure what the quality of them our like. I have the both htc covers and the otterbox
You could try these. I'm using it since i got my phone, and it's a really good case!
http://www.krusell.se/en/products/search/modelid/2334/HTC ONE
i purchased this one http://www.ebay.it/itm/CUSTODIA-ORI..._Cellulari_Cover_Custodie&hash=item338683879d
and it's perfect
krusell are good :good:
http://www.proporta.co.uk/htc-one-leather-case
Quality case, you can get it for 14£ if you bid on their ebay store.
I have the black KLD Oscar flip case on my black HTC One.. a perfect combination.
Looks good, the phone doesn't fall out even if dropped. :victory:
http://www.ebay.com/itm/Black-KLD-Oscar-2-Fashion-Flip-PU-Leather-Wallet-Cover-Skin-Case-For-HTC-ONE-M7-/121165762289?pt=US_Cell_Phone_PDA_Cases&hash=item1c360acef1
Apologies in advance for yet another slim case thread, but really didn't find what I'm looking for:
- as slim as possible, either hard or TPU, but not silicon
- would like all corners/sides covered
- preferably comes in white
The Anker case seems no longer available. Some clear cases got reviews about easily scratched. Some slim cases (e.g., bear motion) leaves the top/bottom unprotected. I have Ditztronic TPU case for a Droid DNA and considered that too thick for my taste.
The Supcase seems to fit my requirement, but I really have no idea how much bulk it adds to the phone. I'm already coming to the moto x for its size from a naked HTC One, so I don't want to add extra bulk if I can help it. Can anyone comment on how thick the supcase is? It's a two-piece (bumper + back)?
http://www.amazon.com/SUPCASE-Motor...qid=1396049886&sr=8-2&keywords=supcase+moto+x
My wife has a Griffin TPU case on her iphone 5s that is really thin and light. Too bad they don't seem to make it for the Moto X.
The Qmadix also looks nice, and comes in white, but again, I wonder how thick it is...
As you said there are several other threads with all this info already and no reason to start a new one. Just read the existing threads, look on Amazon and eBay and find one that fits your criteria. You already know what you want, why do you want us to tell you what you already know?
Mr. Orange 645 said:
As you said there are several other threads with all this info already and no reason to start a new one. Just read the existing threads, look on Amazon and eBay and find one that fits your criteria. You already know what you want, why do you want us to tell you what you already know?
Click to expand...
Click to collapse
I've read through the threads on XDA and elsewhere, searched and read on Amazon, and still have not found the answers I was looking for, or else I wouldn't feel the need to start another thread. If you feel my thread isn't of interest, please don't join the effort. I put rather specific questions about two cases people had mentioned before. I was hoping people who have those cases can address them, instead of me having to gamble the time and money. Isn't that one of the purposes of the forum?
If you can show me posts that directly address my questions, I'll ban myself from asking questions on this forum for 6 months. Hows' that?
fishline said:
I've read through the threads on XDA and elsewhere, searched and read on Amazon, and still have not found the answers I was looking for, or else I wouldn't feel the need to start another thread. If you feel my thread isn't of interest, please don't join the effort. I put rather specific questions about two cases people had mentioned before. I was hoping people who have those cases can address them, instead of me having to gamble the time and money. Isn't that one of the purposes of the forum?
If you can show me posts that directly address my questions, I'll ban myself from asking questions on this forum for 6 months. Hows' that?
Click to expand...
Click to collapse
I don't care if you ban yourself, which just seems silly. But if you have more questions about cases, then you should be posting them in threads that already exist rather than starting a new one.
As far as specific threads, I won't do the work for you but they do exist on this forum. I have personally posted about the Qmaddix cases and have even posted photos of them both on and off my MX. There is also several comments about the Sup cases including photos. There are no questions you asked that haven't already been answered here.
fishline said:
Apologies in advance for yet another slim case thread, but really didn't find what I'm looking for:
- as slim as possible, either hard or TPU, but not silicon
- would like all corners/sides covered
- preferably comes in white
The Anker case seems no longer available. Some clear cases got reviews about easily scratched. Some slim cases (e.g., bear motion) leaves the top/bottom unprotected. I have Ditztronic TPU case for a Droid DNA and considered that too thick for my taste.
The Supcase seems to fit my requirement, but I really have no idea how much bulk it adds to the phone. I'm already coming to the moto x for its size from a naked HTC One, so I don't want to add extra bulk if I can help it. Can anyone comment on how thick the supcase is? It's a two-piece (bumper + back)?
http://www.amazon.com/SUPCASE-Motor...qid=1396049886&sr=8-2&keywords=supcase+moto+x
My wife has a Griffin TPU case on her iphone 5s that is really thin and light. Too bad they don't seem to make it for the Moto X.
The Qmadix also looks nice, and comes in white, but again, I wonder how thick it is...
Click to expand...
Click to collapse
Need protection without overkill: OtterBox Defender. My wife and I bought them for our Moto X's and they are very, very nice. Comes in colors.
My favorite slim case is Fosmon TPU. Tried a supcase but didn't really like it.
Sent from my Sero 7 Pro using Tapatalk
I got a supcase off Amazon. I love it. Has nice look and feel. Not too sure how well it would protect against a good fall, its a slim case after all.
Sent from my XT1060 using XDA Premium 4 mobile app
Qmadix is a nice not-big case
Anyone find a case like the first generation Otter box. It was rubber only. Tire tread, not easy to get out of your pocket. Perfect if you added a screen protector. I had one for my Droid x2. Defender?
It would stay put on your thigh.
Incipio makes slim cases. My wife and I both use Incipio cases on our Moto X's. My wife has the DualPro Shine and I have the DualPro. They are both fairly slim cases.
aviwdoowks said:
Anyone find a case like the first generation Otter box. It was rubber only. Tire tread, not easy to get out of your pocket. Perfect if you added a screen protector. I had one for my Droid x2. Defender?
It would stay put on your thigh.
Click to expand...
Click to collapse
Yes, the Defender is that! I have one. It's great. <highly recommended>
Sent from my XT1055 using XDA Premium 4 mobile app
bluepen61 said:
Yes, the Defender is that! I have one. It's great. <highly recommended>
Sent from my XT1055 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I do not follow you. When I search for the latest Defender for the x, I see only a $40 multi component case. The one I had was one piece all rubber only.
I have this one:
http://www.motorola.com/us/consumer...r-Moto-X-by-Incase/INCASE-PRO-SHELL-XFON.html
Works great for me and has protected my phone perfectly...i have dropped it a few times now on asphalt and the phone is scratch free.
scoobaspeaz said:
I have this one:
http://www.motorola.com/us/consumer...r-Moto-X-by-Incase/INCASE-PRO-SHELL-XFON.html
Works great for me and has protected my phone perfectly...i have dropped it a few times now on asphalt and the phone is scratch free.
Click to expand...
Click to collapse
That is not a slipproof/tire tread back. But thanks.
I really like the SUPCASE Motorola Moto X Phone Unicorn Beetle Hybrid Case, this is slim and offers great protection.
http://www.amazon.com/gp/product/B00E8GQHM2/ref=oh_details_o09_s00_i00?ie=UTF8&psc=1
I bought the casemate naked clear and its very thin. It has a clear bumper and then a hard plastic case that goes around it.
sent from my blue police box flying through time...
I adore this one, compact, durable, stands up in landscape or portrait mode, with rotating belt clip..I need no more than this >> http://m.ebay.com/itm?itemId=390692223991
BLACK HARD STAND CASE COVER+BELT CLIP HOLSTER FOR MOTOROLA MOTO X ACCESSORY
Sent from my 4.3_14.14.14
(Unlocked) XT1028 Moto G
http://waynekent.com/page6.html
NWKENT said:
I adore this one, compact, durable, stands up in landscape or portrait mode, with rotating belt clip..I need no more than this >>[/url]
BLACK HARD STAND CASE COVER+BELT CLIP HOLSTER FOR MOTOROLA MOTO X ACCESSORY
Click to expand...
Click to collapse
Your flip case is looking very nice.. i will buy it. How much shipping cost ?
I pretty much was looking for the same thing as you. Slim case with great protection that added the very minimum bulk necessary to prevent the phone from being damaged and still felt great in the hand. I searched far and wide and decided on these two.
Moto X Hyperion TPU case off eBay. Link and vid included
Link
http://www.youtube.com/watch?v=G3EkhNlr_ek
It costs about $8 and its very slim and minimal. Its matte black and covers the phone great. Even has the dimple cut out for the Moto logo on the back. The TPU around the power/volume are precise and don't make the buttons hard to press unlike cheaper TPU cases out there.
I also ordered another tpu case for about $4 from another seller on eBay
This one is matte black and has the buttons cut out which is a plus since i hate TPU cases that make the buttons hard to press.
Thats about the only difference apart from not having a dimple cut out.
Link
tKoHaXoR said:
I pretty much was looking for the same thing as you. Slim case with great protection that added the very minimum bulk necessary to prevent the phone from being damaged and still felt great in the hand. I searched far and wide and decided on these two.
Moto X Hyperion TPU case off eBay. Link and vid included
It costs about $8 and its very slim and minimal. Its matte black and covers the phone great. Even has the dimple cut out for the Moto logo on the back. The TPU around the power/volume are precise and don't make the buttons hard to press unlike cheaper TPU cases out there.
I also ordered another tpu case for about $4 from another seller on eBay
This one is matte black and has the buttons cut out which is a plus since i hate TPU cases that make the buttons hard to press.
Thats about the only difference apart from not having a dimple cut out.
i got the same case, works well
Click to expand...
Click to collapse
Hi,
Just got another m7,but this ones in black,looks like its heavily prone to scratching,a hell of a lot more then the silver one,i knew that anyway but its really easy to do
the m7 is a good looking phone so dont want uglify it with some ebay tpu case or something silly
just looking for a nice slim black case,matte ideally
or the other option a protective skin..all body and screen if its around?
Suggestions welcome lol this will be my first m7 ive had to case but in reality it needs it for the black ones
Diztronic has some pretty nice matte cases
Personally I use a UAG case for its drop protection and slim design
Don't buy a case, buy a pouch if you need to protect your phone.
It's protected completely, so you can toss it in the backpack or wherever, and it's "naked" while in use - best of both worlds.
When I bought my Silver one, i bought it because of its awesome design. Then after about 1 week, fear in me won and I bought 2 cases - Belkin - i don't recommend this one, as it doesn't copy htc one deign very well, next was Incipio Frequency in black color. First month-or two it was ok, but then volume buttons started squeaking when pressed. It just lose it's tightness, and I must say, that i didn't put my phone in and out very often...
Then i bought chaeap PU leather pouch from ebay, which I use till now (10 months). I am even thinking about stop using the pouch as well.
Don't be fool like me, and don't spend money on those ugly cases, don't forget why did you buy this awesome phone, because of design !
Edit: My video of Incipio case squeaking.
https://www.youtube.com/watch?v=Mv_wXh2OibI
remusator said:
Don't buy a case, buy a pouch if you need to protect your phone.
It's protected completely, so you can toss it in the backpack or wherever, and it's "naked" while in use - best of both worlds.
When I bought my Silver one, i bought it because of its awesome design. Then after about 1 week, fear in me won and I bought 2 cases - Belkin - i don't recommend this one, as it doesn't copy htc one deign very well, next was Incipio Frequency in black color. First month-or two it was ok, but then volume buttons started squeaking when pressed. It just lose it's tightness, and I must say, that i didn't put my phone in and out very often...
Then i bought chaeap PU leather pouch from ebay, which I use till now (10 months). I am even thinking about stop using the pouch as well.
Don't be fool like me, and don't spend money on those ugly cases, don't forget why did you buy this awesome phone, because of design !
Edit: My video of Incipio case squeaking.
https://www.youtube.com/watch?v=Mv_wXh2OibI
Click to expand...
Click to collapse
Curious, what pouch do you recommend?
Hesitent on buying another case when I purchase a Droid Turbo
Leraeniesh said:
Curious, what pouch do you recommend?
Hesitent on buying another case when I purchase a Droid Turbo
Click to expand...
Click to collapse
Hey, sorry for the late answer.
At the moment I am using this one (black colour):
http://www.ebay.com/itm/11-Color-Ne...Cell_Phone_PDA_Cases&var=&hash=item2c8351f9be
The only downside is, that after about 10 months, the corners and edges started "chipping" off the pouch, as it's PU leather. If they were available in my country, I would go either for Bugatti or Sena leather pouches Sena is probably one of the best for M7 (according to reviews). Dad has Bugatti for his Iphone 5s, and it's excelent pouch
I like it might try order one
Hi,
I know you have put ideally UK, I'm from the UK I bought my HTC One M7 Black in November 2014 and the case the previous user was using was a see through gel case, it protected the phone but didn't look good.
Just before xmas I ordered this case:
http://www.ebay.co.uk/itm/UltraThin..._MobilePhonesCasesPouches&hash=item51c54186c6
Its from hong kong, which I wasn't happy with but there is no UK Seller selling this case. It took just over a week to come but its a top case, protects the phone, feels good in the hand and looks good got a matte black finish.
i use a leather case to protect my htc one m7, but now i looking for a clear case to uncover the gorgeous :fingers-crossed:
gingerbreadman123 said:
Hi,
I know you have put ideally UK, I'm from the UK I bought my HTC One M7 Black in November 2014 and the case the previous user was using was a see through gel case, it protected the phone but didn't look good.
Just before xmas I ordered this case:
http://www.ebay.co.uk/itm/UltraThin..._MobilePhonesCasesPouches&hash=item51c54186c6
Its from hong kong, which I wasn't happy with but there is no UK Seller selling this case. It took just over a week to come but its a top case, protects the phone, feels good in the hand and looks good got a matte black finish.
Click to expand...
Click to collapse
I ordered one also, any chance you can post some pictures?
guapinoy said:
I ordered one also, any chance you can post some pictures?
Click to expand...
Click to collapse
Hey, sorry for the late reply. Unfortunately I don't have my digital camera with me to take pictures of it.
I noticed some Oneplus 7 Pro cases show up in my daily Oneplus 7 pro search. Please post links for cases as they come out.
Ringke FUSION X (has decent pictures of the Oneplus 7 Pro)
http://www.ringke.com/site/item.php?id=46&item=683
Tudia HEAVY DUTY DUAL LAYER MERGE CASE
https://tudiaproducts.com/products/heavy-duty-dual-layer-case-for-oneplus-7-pro
KuGi Soft TPU
https://www.amazon.com/dp/B07QQ1V4VG/ref=cm_sw_em_r_mt_dp_U_8P12CbCPPC92G
Osophter Dual Layer Cases Hard
https://www.amazon.com/dp/B07Q1NFX8L/ref=cm_sw_em_r_mt_dp_U_4S12Cb6FBFTMZ
Amazon UK :
Spigen Rugged Armor (an old favourite for some people) : https://www.amazon.co.uk/Spigen-Compatible-OnePlus-Original-Flexible/dp/B07QQ9LSK4
£9.99 (with Amazon Prime)
Ringke Fusion-X : https://www.amazon.co.uk/Ringke-Transparent-Protection-Absorption-Technology/dp/B07Q6GZXZK
£8.99 (with Amazon Prime)
(No affiliate links )
Probably gonna get a clear tpu to go with that blue....
@OneStepAhead any plans for diztronic to get in on the 7pro?
dadoc04 said:
Probably gonna get a clear tpu to go with that blue....
Click to expand...
Click to collapse
I have been binging on Oneplus 7 Pro review videos and the phone seems to come with a clear TPU case in the box. Not sure if that is for all variants though. I was going to order a clear case off Amazon, but I'll wait until I see if it comes with one.
mtucker said:
I have been binging on Oneplus 7 Pro review videos and the phone seems to come with a clear TPU case in the box. Not sure if that is for all variants though. I was going to order a clear case off Amazon, but I'll wait until I see if it comes with one.
Click to expand...
Click to collapse
Stock case is really thin.... So i usually go with 1 of the big names for a case
I wish UAG makes a case for this phone.
borijess said:
I wish UAG makes a case for this phone.
Click to expand...
Click to collapse
But they Must lower the price.
I went through Amazon today to find a screen protector and a case, some of them already have reviews that are 10 days old, those paid reviews don't make the choice easier...
It will be interesting to see which ones work well with a good screen protector
mcwarre said:
It will be interesting to see which ones work well with a good screen protector
Click to expand...
Click to collapse
I like thin cases so I ordered a Nillkin https://www.amazon.com/dp/B07RSGPBRT/ref=twister_B07DCQVJX4?_encoding=UTF8&psc=1
I had one on my McLaren for months. Took a few drops, works well, minimum bulk and weight.
VennligFiende said:
I like thin cases so I ordered a Nillkin https://www.amazon.com/dp/B07RSGPBRT/ref=twister_B07DCQVJX4?_encoding=UTF8&psc=1
I had one on my McLaren for months. Took a few drops, works well, minimum bulk and weight.
Click to expand...
Click to collapse
Just wished it had a magnetic back like the Nillkin I'm using for the 6T.
Still waiting for the phone but I have already ordered:
https://www.aliexpress.com/item/For-Oneplus-7-Pro-Case-Oneplus7-Pro-Cover-Finger-Ring-Holder-Soft-Silicone-Shockproof-Back-Cover/33008606427.html?spm=a2g0s.9042311.0.0.2bbf4c4dDeHpny
Official One Plus Silicone Case (Red) for 7 pro
Any word regarding the Red Silicone Case for the 7 pro? Loved it on my 6T!
dbrand grip <3 comes in 1 month
https://dbrand.com/shop/grip/oneplus-7-pro-cases
I may try that DBrand Grip case when it comes out. I heard good things about that case.
Really thinking about upgrading from my 1+5... You guys would trust in a bumper (only edge covering) to protect this phone? what do you think about that kind of "cases"?
I'm looking on Amazon but it seems that most the ones at the top are full of fake reviews. Some of them have 5+ reviews and none are even verified purchases...
I may just check out a couple of the 10 dollar ones and see how well they work.
https://www.amazon.com/gp/product/B07Q519FB2/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I got that one and worse case returning it is easy if there are issues
Osophter Dual Layer Cases Hard
https://www.amazon.com/dp/B07Q1NFX8L..._4S12Cb6FBFTMZ
I ordered in dark cyan.
I like the Ringke but it won't arrive when I get the phone.
My phones always have a case.
I like the Karbon case from Oneplus, I just didn't want to fork over close to $40 for a case.
I went with this one:
https://www.amazon.com/gp/product/B07Q4MKCN2
No idea how good it is, but I'll update once I get it.