Need help with hard brick - T-Mobile Samsung Galaxy Note 3

I hard brick a t-mobile note 3 by using the NSPRO to repair the IMEI by using N7105 and afterward it hard brick and only do QHSUSB_DLOAD.
my question is that i completely forgotten what android it was on. I wanted to know if it was on 4.3 or 4.2.2 can i use any Kitkat SD debrick file to fix the issues.

The wrong won't work but it won't hurt either, so pick one, and if it fails pick the other.
Frank

Related

Sprint GS3 4.3 Boot.Img Knox Bootloader Hard Brick

I have Hard Bricked my SPH-L710 (noob mistake). I upgraded to 4.3 without reading up on features. Everybody now knows about the annoying KNOX security that comes with it but i did something so HORRIFIC lol i tried to downgrade. didnt end so well. little did i know trying to downgrade with KNOX causes a hard brick..:crying: everyones trying to do the SD card trick where you image the debrick image on the sd card. people are mad to find out that if you upgraded 4.3 you cant fix a hard brick that way anymore. UNLESS someone extracts the boot image from their rooted 4.3 SPH-L710 device then there is a chance that this method will work. use Philz recovery to root 4.3. and someone get this image for me!! dont just do it for me get it for other models too. be nice. or if there is, will someone link it to this thread. or any other way to fix this hard brick.
will a jig work ? i know how to fix it if i get to download mode.
BadThoughtss said:
I have Hard Bricked my SPH-L710 (noob mistake). I upgraded to 4.3 without reading up on features. Everybody now knows about the annoying KNOX security that comes with it but i did something so HORRIFIC lol i tried to downgrade. didnt end so well. little did i know trying to downgrade with KNOX causes a hard brick..:crying: everyones trying to do the SD card trick where you image the debrick image on the sd card. people are mad to find out that if you upgraded 4.3 you cant fix a hard brick that way anymore. UNLESS someone extracts the boot image from their rooted 4.3 SPH-L710 device then there is a chance that this method will work. use Philz recovery to root 4.3. and someone get this image for me!! dont just do it for me get it for other models too. be nice. or if there is, will someone link it to this thread. or any other way to fix this hard brick.
will a jig work ? i know how to fix it if i get to download mode.
Click to expand...
Click to collapse
i Bricked mines too, i have been looking for it too hopefully someone share's the file
Same here, bricked Boot Loader *sigh* Mine came from an idiotic move with the EZ-Unlock app tho. Suppose my next step is to invest in a Class 10 SD Card and pray for the best. There is some other threads around here that have various S3 unbrick images tho, just gotta poke around :good:
I'm in the same boat guys
Aggghh.....I pray for this file every night to fix both mine AND my hubby's GS3. Yup.....had so much confidence in myself (Really it was cockiness) that I bricked mine and then his!
me too...bah!
I missread the dev topic on the S3 Factory reset and counter and got burned. I was running a custom 4.3 and thought I was good...oh well.
I have tried the SD card method with several different images, but alas I am still in crapville without a shovel. $50 to send off for repairs or wait for something to come along. Right now I am hurting, hard to believe that phone was so important! Argh! Has anyone had luck?
Sigh...a little searching helps.
http://forum.xda-developers.com/showthread.php?t=2637424

[Q] Hardbrick 4.4.2 on I747m

Hey guys. I've been looking for this information online and I just haven't been able to get any help.
I hardbricked my s3(wont power on) while on 4.4.2, while trying to install a bootloader/modem. I cant even remember which one I installed, it was chaos trying to get cm 11 working.
Is there a unbrick img that works for the i747m model on 4.4.2? Is there any way to fix my phone without a jig or jtag or any DIY methods? I've read a unbrick threads and some say they don't have a fix for 4.4.2 yet but im not sure if they are just outdated.
Any help would be greatly appreciated
Pantea01 said:
Hey guys. I've been looking for this information online and I just haven't been able to get any help.
I hardbricked my s3(wont power on) while on 4.4.2, while trying to install a bootloader/modem. I cant even remember which one I installed, it was chaos trying to get cm 11 working.
Is there a unbrick img that works for the i747m model on 4.4.2? Is there any way to fix my phone without a jig or jtag or any DIY methods? I've read a unbrick threads and some say they don't have a fix for 4.4.2 yet but im not sure if they are just outdated.
Any help would be greatly appreciated
Click to expand...
Click to collapse
We need to know which one you flashed so we can suggest a fix. Otherwise, you could end up flashing the wrong bootloaders/baseband and hard-brick your phone (if it's not already).
As for the unbrick, it is for 4.3. I don't think we have one for 4.4.2 yet.
A Jig is only helpful if you didn't mess with the bootloaders.
If you've flashed the 4.4.2 modem on 4.3 firmware, there is no way to fix this type of brick yet. I think one or two other people who hard bricked differently on 4.4.2 have been able to fix theirs. Hard to remember for sure. (Everyone keeps opening new threads for every brick rather than just posting in the existing thread so it makes it a lot harder to keep track of what has worked, and even more difficult to find the relevant posts again.....)

[Q] Samsung Note 2/SGH-T889V ,flashed t-Mobile modem on Wind Mobile phone

About 1 and a half months ago I flashed a Rom, as I had done many times before, and expected to have little to no problems with it. Man was I wrong. I was unaware that I had flashed a T-Mobile modem with it by mistake. I had done 3-4 backups in TWRP but they all must be too old to help or something. I have read that any Canadian SGH-T889v Note 2's, which is what I have, that flash the T-Mobile modem can not revert back to the Wind Mobile modem. If I am wrong can someone with more experiance with this issue, please, correct me and guide me in the right direction to repair it. I have bought a Z3X box to repair my imei but over the last 7 days I have been unable to have my Note 2 even be recognize by it. I am assuming that something has been damaged in the usb communication setup. And yes I have reconfigured the settings in the hidden menus just as the instructions laid out. The baseband appears to be locked to the T-Mobile version "T889UVUCMK7". I am at the android version 4.4.2, and my bootloader is at version T889VVLUDNE7, which is also the number for my PDA Version. I have read that a JTag may be the way to go to recover the full functionality of my Note 2. If this is correct can someone recommend a good one.
Thanks to everyone who shares their experience.
If you end up with JTAG, mobiletechvideos.com is a reputable one. I doubt you will get far without something akin to JTAG. YMMV.

[Q] SGH-T999L hard bricked help

Hello
I have hard bricked my SGH-T999L 4.3 after installing EZ-Unlocker by mistake, I was trying to downgrade my android version, I know it was a big mistake :silly:
The phone now is dead, I can't see it on Odin, I tryed to debrick it with sd-card method from the KAsp3rd post hier: http://forum.xda-developers.com/showthread.php?t=2439367 but I have no luck, I searched in the past 2 days for another method but I can't find it.
Please can someone help me?
I'm also experiencing the same problem on my Samsung Galaxy S3 T999 variant.
I flashed the FlashingDroid v2.2 for the I9300 (which was pretty st***d on my part) and ended up hard-bricking the phone.
I have tried the SD Card method on 2 different 16gb micro SDs with no luck.
Odin can't detect my phone, but it's listed as QHSUSB_DLOAD on the device manager.
I have no way of getting a jig (and no skills to make one whatsoever)
If no one has any other way to resolve the issue, I might TRY to make a jig.

Hard bricked Phone

A friend of mine brought his i747 to me to see if I can fix his phone because it was tripping out. I decided to root it and installed CM13. That however created even more trouble for the phone. It changed the device model to T999 and also the imei and baseband where unknown. I tried to return it to stock but I couldn't find any site that has the 4.1.1 or 4.1.2 and only found a link to 4.3. I decided to flash that with odin and the phone became unresponsive after that. Is there away in which I can find this or do I need to get a new mother board?
Where did you get the 4.3 file? Do you have the file name?
gaara22 said:
A friend of mine brought his i747 to me to see if I can fix his phone because it was tripping out. I decided to root it and installed CM13. That however created even more trouble for the phone. It changed the device model to T999 and also the imei and baseband where unknown. I tried to return it to stock but I couldn't find any site that has the 4.1.1 or 4.1.2 and only found a link to 4.3. I decided to flash that with odin and the phone became unresponsive after that. Is there away in which I can find this or do I need to get a new mother board?
Click to expand...
Click to collapse
Do you get any vibrations when trying to power it on? Try to take it apart if you are comfortable and look for any physical damage if it doesn't show anything at all. Sometimes the board is damaged pretty bad but still boots, but restoring/flashing bootloader will completely brick it beyond recovery.
If it does give some response then you can look at the other unbrick threads and try em one by one. Wish you luck! BTW if all fails I have a s3 without a screen but good logicboard and stuff I can sell it to you. Or I could also buy the screen off you if you would like. Just PM me if that is the case. Anyways hope you can unbrick it.

Categories

Resources