I have a T999L and have flashed pretty much every ROM, and with all of them, I have no signal. I wipe cache/factory reset, installed, rebooted, and never have a signal. When I go into mobile networks, there's no apn. I've tried everything I could find from others with this problem and can't get it to work. What am I doing wrong? I have literally been doing this all day. Since 10 am and it's now 12:30 am. I would've flashed the stock ROM sooner, but my phone hasn't been working right, so I figured a newer one would be beneficial.
Oh, and I've only been trying the ones that say they're for t999l or d2lte.
Flash stock firmware with Odin. If you're having problems on every single rom something is wrong with your device or firmware. Only way to know is the Odin flash.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
DocHoliday77 said:
Flash stock firmware with Odin. If you're having problems on every single rom something is wrong with your device or firmware. Only way to know is the Odin flash.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Thanks for replying.
I had been using what you provided (thanks for that, btw - that was super fast and easy, so even if I don't have a custom ROM, at least I'm rooted!) I ended up flashing back to that so it at least works. I think before I found your thread, though, I tried flashing ROMs a and stopped because not many said specifically for LTE, so I just didn't want to keep messing around. Once I realized my device was different, I dug more an was saved by your thread. Anyway, is it possible I messed something up when I had originally flashed non-functioning ROMs?
Wow, so I think I figured out my problem, and it's indicative that I shouldn't have been messing around with flashing... I didn't realize firmware and ROMs were different. So since I was flashing 4.4 ROMs with the old firmware, would that result in my problem or a brick? Sounds like unfixable brick, so I'm clearly very fortunate to have a working phone right now! lol
I'm doing a backup now and downloading LUVUBNC1. I know to use Odin for the firmware, but it's a .zip file, which Odin doesn't do... Sorry, I've flashed plenty of ROMs on my old phones, so doing anything outside of a regular .tar in Odin or .zip in recovery is a new concept to me and I'm not having the easiest time finding directions.
Sorry I haven't replied sooner. Had a lot going on lately and its just been hard to do much online.
The firmware you downloaded just needs to be extracted. Its zipped just to make it a smaller download. when you unzip it, the resulting file should be a .tar.md5 file. This is what you flash with Odin.
As for Roms, as long as you stay in the T-Mobile subforums, you will be relatively safe. Just do not flash any firmware or modems that are not specifically for your model. Some people have had some issues with certain roms not working quite right on the T999L, but its nothing that causes permanent harm. If this happens you can always just flash back to a known good rom, or your stock firmware.
So for future reference, you can flash all of the Roms, Kernels and Recoveries found in these T-Mobile forums. (In fact, I suggest flashing either the d2lte or d2tmo recoveries over the d2ltetmo). Just remember, Firmware and Modems are ok ONLY if they are for your model.
And with regard to flashing 4.4 roms on old firmware, you don't need to worrry about a brick as long as you stick to what I just said. The only thing different is for 4.4.2 touchwiz roms (which are all ported from Sprint or AT&T). To run a 4.4.2 TW rom, you must be updated to the 4.3 firmware (which you are if you are running NC1). But even so, if you were on earlier firmware, it wouldnt hard brick, it would just hang at boot.
I hope that clears things up a bit for you!
Related
I never had any issues with my old M919, which is still sitting in a drawer awaiting a new display assembly I cannot afford. It was running CM 10 perfectly and no issues with HSPA or LTE. I was suffering for a while with an HTC Espresso which I could not S-OFF due to HBOOT being incompatible with AlphaRev. Anyway, I ended up with my old roomate's M919 about a week ago and have had nothing but issues getting mobile data to work properly.
It already had the MK2 Baseband installed-though I did not bother to check if it worked on the stock 4.3 ROM he had already installed. Nor did he ever say anything about issues. Anyway, I tried almost all of the Infamous ROM's(and all the kernels available with AROMA) as well as Cyanogenmod 10.2. All ROM's have major issues maintaining mobile data connection regardless of network mode or which cell I am on. Wi-Fi works flawlessly however. Also, to note, my fiance is running MK2 on her stock M919 so I have had a reference of which type of cell we are on and its signal strength.
So, finally I flashed the MK2 modem manually and rebooted into CM 10.2. That just made it completely unable to connect to any type of network although Wi-Fi worked just fine. So, now I am attempting to reinstall Infamous S4 from a full wipe to see if that will work, but after that I am out of ideas.
fallofredmond said:
So, finally I flashed the MK2 modem manually and rebooted into CM 10.2. That just made it completely unable to connect to any type of network although Wi-Fi worked just fine. So, now I am attempting to reinstall Infamous S4 from a full wipe to see if that will work, but after that I am out of ideas.
Click to expand...
Click to collapse
Have you checked your APN settings (versus your fiancés) to make sure they are correct? And to be completely fair, you could post in one of the many CM threads like this one here, you will target a much larger and focused support base. :good:
The whole mdl / mk2 radios are a mess. There are 2 radios, one for lte and one for hspa and below. The LTE one stays mdl and only the other is upgraded because of knox installation that some people are worried about (their warranty).
I believe what you may want to do is install the ota official for 4.3 to get all the correct radios and just forget about the warranty. There have been ways to reset the knox counter later down the road if you want to claim your warranty but I do not recall any guides.
I've started a thread here too for some clarifications on this subject so check that for answers too
POQbum said:
The whole mdl / mk2 radios are a mess. There are 2 radios, one for lte and one for hspa and below. The LTE one stays mdl and only the other is upgraded because of knox installation that some people are worried about (their warranty).
I believe what you may want to do is install the ota official for 4.3 to get all the correct radios and just forget about the warranty. There have been ways to reset the knox counter later down the road if you want to claim your warranty but I do not recall any guides.
I've started a thread here too for some clarifications on this subject so check that for answers too
Click to expand...
Click to collapse
First, there is currently NO METHOD to reset your KNOX counter, please do not give wrong information (which is why we have THIS thread).
Second, a link to this thread of yours would be useful, if you only linked it.
Third, "correct" radios are already freely available on XDA without taking the 4.3 OTA. He may have flashed an improper or incompatible modem.bin file, which is why his problem is occurring.
xdapowerapps said:
First, there is currently NO METHOD to reset your KNOX counter, please do not give wrong information (which is why we have THIS thread).
Second, a link to this thread of yours would be useful, if you only linked it.
Third, "correct" radios are already freely available on XDA without taking the 4.3 OTA. He may have flashed an improper or incompatible modem.bin file, which is why his problem is occurring.
Click to expand...
Click to collapse
Correct radio's without knox means that there is still an old LTE radio which creates and has been creating lots of problems for people.
I don't care about a flash counter anyway, and sorry did not mean to spread mis-information.
My thread is here: http://forum.xda-developers.com/showthread.php?t=2609962
the only answer I was given was one that told me to do the exact thing I didn't want to do, which is to flash the GSM MK2, but leave the LTE MDL.
-------------
I'm looking to see if anyone can help me find a way to flash the OTA update which contains KNOX (which includes the MK2 LTE) and also the MK2 GSM radio's.
The only downside I see to flashing KNOX (and the MK2 LTE) is this flash counter. I believe I heard somewhere you may not be able to flash new kernels, but I'm not sure if that is correct or not. If it is correct and I can not flash new kernels, I also do not care and don't know why so many people are okay with LTE radio's that go out all the time vs a flash counter+stock kernel
POQbum said:
Correct radio's without knox means that there is still an old LTE radio which creates and has been creating lots of problems for people.
I don't care about a flash counter anyway, and sorry did not mean to spread mis-information.
My thread is here: http://forum.xda-developers.com/showthread.php?t=2609962
the only answer I was given was one that told me to do the exact thing I didn't want to do, which is to flash the GSM MK2, but leave the LTE MDL.
-------------
I'm looking to see if anyone can help me find a way to flash the OTA update which contains KNOX (which includes the MK2 LTE) and also the MK2 GSM radio's.
The only downside I see to flashing KNOX (and the MK2 LTE) is this flash counter. I believe I heard somewhere you may not be able to flash new kernels, but I'm not sure if that is correct or not. If it is correct and I can not flash new kernels, I also do not care and don't know why so many people are okay with LTE radio's that go out all the time vs a flash counter+stock kernel
Click to expand...
Click to collapse
It's okay, we are all learning about information . The modem.bin file you flash in Odin replaces your old one (which is why the name of the file HAS to be modem.bin, otherwise nothing will get replaced).
Why do you WANT KNOX? KNOX is part of the bootloader for 4.3+. The guide you linked is how almost everyone has updated their modems on 4.2.2 bootloader.
If you are on 4.2.2 bootloader, follow these steps:
1) Download the 4.3 modem.
2) Place phone in download mode (Vol Down + Home + Power)
3) Open Odin and plug into computer.
4) Select "Phone" and then choose the modem.bin file.
5) Uncheck "Auto-reboot"
6) Press Start and wait 30 seconds after it says "Passed."
7) Restart phone.
I can almost guarantee you that this will work because this has been proven to work hundreds of thousands of times. I am on 4.2.2 MDL LTE (since I am already on 4.2.2) and I just flashed the 4.3 MK2 modem. I have no problems at all with data now.
EDIT: I am also using a 4.3 MK2 modem on 4.2.2 and have no issues.
xdapowerapps said:
It's okay, we are all learning about information . The modem.bin file you flash in Odin replaces your old one (which is why the name of the file HAS to be modem.bin, otherwise nothing will get replaced).
Why do you WANT KNOX? KNOX is part of the bootloader for 4.3+. The guide you linked is how almost everyone has updated their modems on 4.2.2 bootloader.
If you are on 4.2.2 bootloader, follow these steps:
1) Download the 4.3 modem.
2) Place phone in download mode (Vol Down + Home + Power)
3) Open Odin and plug into computer.
4) Select "Phone" and then choose the modem.bin file.
5) Uncheck "Auto-reboot"
6) Press Start and wait 30 seconds after it says "Passed."
7) Restart phone.
I can almost guarantee you that this will work because this has been proven to work hundreds of thousands of times. I am on 4.2.2 MDL LTE (since I am already on 4.2.2) and I just flashed the 4.3 MK2 modem. I have no problems at all with data now.
Click to expand...
Click to collapse
I want knox because I want the LTE radio which is tied to knox. I don't care if I have knox or not. My phone is not under warranty anyone, and if that is the only thing that is scaring people away then I have no reason to worry about knox.
I may try out this scenario but right now my phone reboots all the time and I've heard people having issues with LTE on 4.3 ROM's so I am not looking forward to spending hours configuring my phone only to wipe it all again, but it may work out better than I am thinking so I will give it a shot.
For reference, if there is a flashable full 4.3 ROM/.tar (with knox and the MK2 LTE included) out there and you could link me, I would appreciate it. I can't seem to find any which is odd.
Cheers
POQbum said:
I want knox because I want the LTE radio which is tied to knox. I don't care if I have knox or not. My phone is not under warrantly anyone, and if that is the only thing that is scaring people away then I have no reason to worry about knox.
I may try out this scenario but right now my phone reboots all the time and I've heard people having issues with LTE on 4.3 ROM's so I am not looking forward to spending hours configuring my phone only to wipe it all again, but it may work out better than I am thinking so I will give it a shot.
For reference, if there is a flashable full 4.3 ROM/.tar out there and you could link me, I would appreciate it. I can't seem to find any which is odd.
Cheers
Click to expand...
Click to collapse
There are 4.3 flashable ROMs out there but they will not give you what you want. You will HAVE to Odin flash a stock file to get what you're after.
Here are some links for the stock MK2 with KNOX included (choose whichever one is faster). :good:
http://www.sammobile.com/firmwares/3/?download=22280
http://samsung-updates.com/details/16429/Galaxy_S_4_T-Mobile/SGH-M919/TMB/M919UVUEMK2.html
http://rapidgator.net/file/c98247edd8cd1cee88383ceef83a8c7f
Cheers mate!
xdapowerapps said:
There are 4.3 flashable ROMs out there but they will not give you what you want. You will HAVE to Odin flash a stock file to get what you're after.
Here are some links for the stock MK2 with KNOX included (choose whichever one is faster). :good:
http://www.sammobile.com/firmwares/3/?download=22280
http://samsung-updates.com/details/16429/Galaxy_S_4_T-Mobile/SGH-M919/TMB/M919UVUEMK2.html
http://rapidgator.net/file/c98247edd8cd1cee88383ceef83a8c7f
Cheers mate!
Click to expand...
Click to collapse
Okay so I load this file: http://samsung-updates.com/details/16429/Galaxy_S_4_T-Mobile/SGH-M919/TMB/M919UVUEMK2.html
How do I flash it through ODIN? Do you know what steps I need to do? Should I wipe data/cache first?
I've flashed a few things through ODIN because and am familiar with it
POQbum said:
Okay so I load this file: http://samsung-updates.com/details/16429/Galaxy_S_4_T-Mobile/SGH-M919/TMB/M919UVUEMK2.html
How do I flash it through ODIN? Do you know what steps I need to do? Should I wipe data/cache first?
I've flashed a few things through ODIN because and am familiar with it
Click to expand...
Click to collapse
Open up odin, select PDA, choose the tar file you just downloaded.
Then put your phone in download mode (vol down + home + power), then connect it to your computer.
Once odin detects your phone, press start. It will take 15 to 20 mins and it will restart by itself.
After it reboots and for some reason you get stuck on the tmobile screen for more than 10 mins, go into recovery and wipe/data factory reset and wipe cache. Then your phone will boot up fine. Enjoy ^_^
Sent from my SGH-M919 using XDA Premium 4 mobile app
xdapowerapps said:
Have you checked your APN settings (versus your fiancés) to make sure they are correct? And to be completely fair, you could post in one of the many CM threads like this one here, you will target a much larger and focused support base. :good:
Click to expand...
Click to collapse
Both M919's are set to fast.t-mobile.com, although I haven't checked to see if the settings all match. I will definitely check that later.
As for threads here and elsewhere to solve the problem, I have tried pretty much everything I have seen. Most of what I have been reading on both CM and custom TW ROM threads is "me too" or "I don't have that problem".
POQbum said:
The whole mdl / mk2 radios are a mess. There are 2 radios, one for lte and one for hspa and below. The LTE one stays mdl and only the other is upgraded because of knox installation that some people are worried about (their warranty).
I believe what you may want to do is install the ota official for 4.3 to get all the correct radios and just forget about the warranty. There have been ways to reset the knox counter later down the road if you want to claim your warranty but I do not recall any guides.
I've started a thread here too for some clarifications on this subject so check that for answers too
Click to expand...
Click to collapse
Ok, now I just got thrown for a loop. Please use Heimdall to print your PIT and post it. On my PIT there appears to be only one partition with a radio... not 2.
xdapowerapps said:
There are 4.3 flashable ROMs out there but they will not give you what you want. You will HAVE to Odin flash a stock file to get what you're after.
Here are some links for the stock MK2 with KNOX included (choose whichever one is faster). :good:
Cheers mate!
Click to expand...
Click to collapse
I'm not waiting 4-8 hours to download a ROM. Yes, I understand those estimates are ads to try to get you to buy "premium membership" but still, do you have a legit mirror?
I flashed the Root66 KitKat update for Wind Mobile using Odin. As I was looking through the settings I noticed there were no APNs set. I googled for Wind's APN configuration and manually entered them (before I even tested data, perhaps it was working regardless).
So far I've seen a number of mentions warning against flashing the 4.4.2 modem before flashing the 4.4.2 firmware update. However, I've yet to see the modem posted anywhere. The most recent one in the baseband thread was for 4.3. What am I missing?
Normally 4.3 modem will be working for 4.4 too but you should not have older modem then 4.3
Sent from my SGH-T999 using Tapatalk
It hasn't been posted for that same reason, so nobody will attempt to flash.. Anyone can make a flashable zip for the modem, that it why we are letting people know what happens when you try to flash on older firmware
Sent from my SGH-M919 using Tapatalk
Ill still post the modems in the near future, but wanted to first get that warning out so as many people as possible already know about it when I do. Flashing the 4 4.2 modem on 4.3 firmware has bricked quite a few devices in the Spirit and AT&T forums already. And despite all our efforts, we have yet to get the debrick method to work
That said, if you have a need for the modem, ill get it for you as soon as I can.
And just fyi, after updating to 4.4.2, you cannot use any older modems. They won't brick the device, but you won't have a working radio/signal.
DocHoliday77 said:
Ill still post the modems in the near future, but wanted to first get that warning out so as many people as possible already know about it when I do. Flashing the 4 4.2 modem on 4.3 firmware has bricked quite a few devices in the Spirit and AT&T forums already. And despite all our efforts, we have yet to get the debrick method to work
That said, if you have a need for the modem, ill get it for you as soon as I can.
And just fyi, after updating to 4.4.2, you cannot use any older modems. They won't brick the device, but you won't have a working radio/signal.
Click to expand...
Click to collapse
Heya Doc
I have a Gs3 T999v from Videotron and have been running the 4.3 modem since early this year. I'm currently running CM11 4.4.4.
I was wondering if it would be possible to provide a link for their 4.4.2 modem so I can give it a shot. I know I won't be able to come back from it, but reception with the 4.3 has not been that hot and I've been meaning to get those kinks out. Also since the phone is nearing the end of it's life, at least to me, I don't mind the extra risk. Even if it should technically be entirely safe to do so since i'm running 4.4.2+
Cheers!
These issues started with the upgrade to latest T-Mobile 4.3 software pack at the end of November. Phone operated perfectly before then. After the update, the phone would periodically not receive/place calls/texts/use data. The issue kept worsening daily. It is not related to the SIM card or location, as the card has been replaced and tested in an alternate phone where it performs perfectly.
The T999L was then consequently rooted, KNOX flagged (it's already past warranty, Samsung wouldn't give a rat's ass about it), flashed to CM11 M12 and later a variety of modems was tried. Same issues persisted. Restored to stock 4.1.2, same issues. Did 3 updates OTA to get to latest 4.3, same issues.
Messed around with 4636 menu, 2263 menu, etc. Some changes had a temporary result but nothing permanent. Calls to the phone are redirected to voicemail. When placing a call, it takes 5-10 seconds to either place it or disconnect it (as it can't connect to the network, I guess?). The bars on the phone show 3-4 bars typically, but the phone is rarely able to acquire a data connection. Again, this is not the case with other phones the SIM is tried on.
Any suggestions? I've spent probably close to 10 hours researching this and trying everything out and I am absolutely stumped. This is my mom's phone and a replacement Alcatel OneTouch Fierce 2 just "doesn't look nice", so I'm getting a fair bit of *****ing for trying to help solve this, even though it's not my fault. Would appreciate some help before Christmas.
Have you tried updating the modem?
systemcode said:
Have you tried updating the modem?
Click to expand...
Click to collapse
flashed to CM11 M12 and later a variety of modems was tried. Same issues persisted.
Click to expand...
Click to collapse
I'd say so. Used this thread: http://forum.xda-developers.com/showthread.php?t=1880987 and flashed the 4.3 basebands for T999L and T999N, total of 3. I'm thinking this is something to do with the 4.3 bootloader or basebands... any methods to go back to 4.1.2 without a brick?
tagging this for later use:
http://forum.xda-developers.com/showthread.php?t=2121736
http://forum.xda-developers.com/showthread.php?t=2258238
dwegiel said:
I'd say so. Used this thread: http://forum.xda-developers.com/showthread.php?t=1880987 and flashed the 4.3 basebands for T999L and T999N, total of 3. I'm thinking this is something to do with the 4.3 bootloader or basebands... any methods to go back to 4.1.2 without a brick?
tagging this for later use:
http://forum.xda-developers.com/showthread.php?t=2121736
http://forum.xda-developers.com/showthread.php?t=2258238
Click to expand...
Click to collapse
If you have a T999L stick to the designated T999L modems and nothing else, or you may damage the device. If you have a 4.3 bootloader there is no way back. Have you tried to use ODIN to flash the latest NF4 firmware for your T999L and then do a factory reset using the stock recovery? I posted NF4's link in this post. Good luck.
nirogu325 said:
If you have a T999L stick to the designated T999L modems and nothing else, or you may damage the device. If you have a 4.3 bootloader there is no way back. Have you tried to use ODIN to flash the latest NF4 firmware for your T999L and then do a factory reset using the stock recovery? I posted NF4's link in this post. Good luck.
Click to expand...
Click to collapse
Downloading right now, and will test. Pretty sure this is the firmware update after which this problem started occurring.
Any other ideas for what might be affecting this besides baseband? I have a feeling something else might be causing this. I'm not familiar with Samsung partitions though and what is flashed by OTA/Odin.
dwegiel said:
Downloading right now, and will test. Pretty sure this is the firmware update after which this problem started occurring.
Any other ideas for what might be affecting this besides baseband? I have a feeling something else might be causing this. I'm not familiar with Samsung partitions though and what is flashed by OTA/Odin.
Click to expand...
Click to collapse
Well, OTA updates can sometimes fail, that's why I gave you the ODIN firmware link. It's the best help I can offer.
I'm really frustrated. I've been trying to update this Galaxy S3 for days now with no success. Currently I am running on Slimkat 7.0. It's sometimes slow and buggy and needs some updating.
For reference, this is the phone at its current state:
- Bootloader: i747ucalh9 (literally taken from the fail message when trying to update to any other bootloader)
- Modem/firmware (?): I747UCLH9
Here's what has happened, greatly summarized (note I'm using CM6.0.4.7 for all of these operations, and when I say "update", I mean "flash"):
- I tried updating to Slimkat 9 but received no signal. I gave up on it entirely for a while
- I tried installing various LP ROMs, including CM12.1.
- I had 12.1 running for a bit, but I had no connectivity. LTE, 3G,H+ nothing.
- I tried installing a newer modem (this thread. Finally at MJB, I could actually get connectivity in some of the newer ROMs (including Slimkat 9)... but it was very erratic. It would just randomly oscillate between LTE and 3G and H+. This also broke CM12.1 entirely.
- Again, the above problem was always present. Most of the LP ROMs would just bootloop me, though. The only one that worked was Cyanide L... which I didn't really like.
- I thought maybe the issue was the bootloader. My bootloader is still i747ucalh9. So I tried updating it to various bootloaders from here, but none of the updates will work. Literally, they give me error 6 or 7 and pretty much essentially tell me that I can't do it.
- So after repeating the cycle of "let me try to update this" several times and having the update fail on me, I'm still stuck at Slimkat 7 as the only thing that worked on LTE (note the past tense). Worse yet, I tried simply downgrading my modem to match my current bootloader version, but that made things worse than better. I am now stuck at 3G... which just recently went back to LTE. Talk about erratic.
- I also tried going full stock by flashing this: http://forum.xda-developers.com/showthread.php?t=2363882 But it expects 5 arguments for format, and got 3... or something. Failed hard.
So, I'm pretty much at the end of my rope here. I really might just go and grab a new phone at this point. I just really don't want to because this thing still works fine.... I guess I got unlucky and am at a version of the bootloader that is difficult to update from. I can't seem to go anywhere with this thing. Anyone have any ideas? Do I need to use a different recovery?
Thanks...
First and foremost, verify your bootloader. Install the Samsung phone info app, or in a terminal app or adb shell enter:
Code:
getprop ro.bootloader
If you're on any of the older bootloaders (the ones that do not end in MJB, NE4, or NJ1) there are two ways you can go (you probably will be given the age of your modem). If you're on any of the ones that end in MJB, NE4, or NJ1 you've got to be a lot more careful because downgrading them will hard brick your phone (Odin back to stock is not an option anymore).
Option 1: If you're on the older bootloaders, you can go to sammobile.com, grab the 4.1.1 firmware from there and flash it with Odin. Do not do this if your bootloader ends in MJB, NE4, or NJ1 (can't stress that enough). This will reset your phone completely to stock. You should now start getting OTA updates. They will be incremental updates, you'll have to take at least three or four to get up to date on bootloader and modem and they're big downloads. They will come every 24 hours, but you can cheat that by setting your system time forward 1 day to make them a little more rapid fire. This is a nice, safe way to get your firmware current. Once you're up to NJ1 firmware you can use Odin to flash a custom recovery and get back to custom ROMs; I'd recommend TWRP 2.8.6 if you're going to be flashing newer ROMs as CWM and Philz aren't as up to date and sometimes give problems with newer ROMs.
Option 2: I'm pretty sure your version of CWM is a big part of your problem. If you're going to be flashing lollipop you ought to update your recovery to TWRP 2.8.6; easiest way to get it is just use the Flashify app. I'd get that recovery up to date before messing with bootloaders too. Next get your firmware up to date. If your bootloader version is before MJB, then you have to start with MJB. Then update to NE4. Then update to NJ1. It has to be done incrementally, and the bootloader and modem must match on the newer firmwares, or you'll hard brick. This thread has recovery flashable MJB and NE4 bootloaders/modems; the bootloader and modem are packaged together in the same zip so you can't get out of sync. This thread has recovery flashable NJ1 bootloader/modem. This will get your firmware all up to date, and data should start behaving on newer kitkat and lollipop ROMs. This route is a lot more risky than the OTA route described above because of all the manual steps you have to take, but you could get it done quite a bit faster if you're confident in your abilities. Just read those linked threads very, very carefully and make certain you understand.
Good luck.
jason2678 said:
First and foremost, verify your bootloader. Install the Samsung phone info app, or in a terminal app or adb shell enter:
Code:
getprop ro.bootloader
If you're on any of the older bootloaders (the ones that do not end in MJB, NE4, or NJ1) there are two ways you can go (you probably will be given the age of your modem). If you're on any of the ones that end in MJB, NE4, or NJ1 you've got to be a lot more careful because downgrading them will hard brick your phone (Odin back to stock is not an option anymore).
Option 1: If you're on the older bootloaders, you can go to sammobile.com, grab the 4.1.1 firmware from there and flash it with Odin. Do not do this if your bootloader ends in MJB, NE4, or NJ1 (can't stress that enough). This will reset your phone completely to stock. You should now start getting OTA updates. They will be incremental updates, you'll have to take at least three or four to get up to date on bootloader and modem and they're big downloads. They will come every 24 hours, but you can cheat that by setting your system time forward 1 day to make them a little more rapid fire. This is a nice, safe way to get your firmware current. Once you're up to NJ1 firmware you can use Odin to flash a custom recovery and get back to custom ROMs; I'd recommend TWRP 2.8.6 if you're going to be flashing newer ROMs as CWM and Philz aren't as up to date and sometimes give problems with newer ROMs.
Option 2: I'm pretty sure your version of CWM is a big part of your problem. If you're going to be flashing lollipop you ought to update your recovery to TWRP 2.8.6; easiest way to get it is just use the Flashify app. I'd get that recovery up to date before messing with bootloaders too. Next get your firmware up to date. If your bootloader version is before MJB, then you have to start with MJB. Then update to NE4. Then update to NJ1. It has to be done incrementally, and the bootloader and modem must match on the newer firmwares, or you'll hard brick. This thread has recovery flashable MJB and NE4 bootloaders/modems; the bootloader and modem are packaged together in the same zip so you can't get out of sync. This thread has recovery flashable NJ1 bootloader/modem. This will get your firmware all up to date, and data should start behaving on newer kitkat and lollipop ROMs. This route is a lot more risky than the OTA route described above because of all the manual steps you have to take, but you could get it done quite a bit faster if you're confident in your abilities. Just read those linked threads very, very carefully and make certain you understand.
Good luck.
Click to expand...
Click to collapse
Thanks a lot for the help! I actually did/tried a majority of this an hour or two before you posted that, except the latest firmware update link you supplied. I knew it existed and I had seen that thread before, but I couldn't dig up the link again before I had to go to work. Thing is I kind of wanted to avoid Odin for some reason but I finally gave up and used it. And yeah I already knew my bootloader version. The phone told me when it failed to update the bootloader lol.
Here's what happened thus far:
- I used Odin to flash the sammobile 4.1.1. The flashing worked just fine, but booting into it did not. It hung on the Samsung logo. So, OTA updates were out the window.
- I have no idea why, so I just used Odin to flash TWRP onto it afterwards (from here)
- I tried one of the ROMS. Data still didn't work.
- I used the thread you linked to update to MJB bootloader and whatnot. The update went fine.
- Tried another few ROMs. Data worked, but LTE was still erratic.
- Updated to NE4 and then grabbed the deoxed stock ROM.
- The deoxed stock rom failed to boot (stuck at ATT globe logo). For some reason my phone can't use stock ROMs.
- So again used Odin to put TWRP onto the phone
- Installed various LP ROMS. Again the data was erratic and plus the battery life was horrid.
- Tried getting the ktoonsez kernel. My service was murdered.
- Gave up on LP. Tried Slim 9.0. Erratic data.
- Tried Liquidsmooth 4.4.4 instead.
Currently that's kind of where I'm at. The LTE data works fine (takes a bit to get up and running after reboot though) and thus far everything is okay (though that can quickly change considering I haven't done much of anything), so I don't even know if I want to mess with it anymore. It looks like this specific ROM includes a custom kernel. So I'm guessing it's an incompatibility between the kernel and the firmware version on the other ROMs. It seems like most of the LP roms have horrible battery life (back of my phone feels like a furnace on them), so I'm not even sure if I want to do that last firmware update to use them.
It'd be kind of nice to use the OTA but apparently my ability to go stock in any form or fashion is just totally borked.
Thanks for the post though, that's pretty gold. I'm sure someone in a situation like me where they have a super old firmware will find this thread of some use as it has actual instructions and links to what you need to do to get up and running. Before you posted that, I had to go digging around pretty much everywhere figuring out what and where was going wrong.
Glad you've got it mostly working.
You might have been able to get that stock ROM to boot if you had booted into the stock recovery and run a full wipe. Touchwiz ROMs can be tough to get running after being on AOSP. As a general progression try to format internal storage with TWRP (the wipe where you have to type "yes" to confirm), if that doesn't work try a wipe with Philz, and if that doesn't work nothing, not even Odin, is effective as a wipe in the stock recovery.
Thanks for typing all this out I believe it will help me put cm12.1 official on a friends phone.
Are these the steps?
1) verify latest software
2) twrp via Odin
Alt 2) root via apk then use rashr or similar to flash twrp
3)wipe
4)In twrp install official d2att from cm website
5) install current gapps
6) profit
I'm not new to this at all but I've never even touched an att gs3 and I know most devices have their quirks and I don't want to brick.
Also does towel root work on this? I don't mind Odin but I can do this on the fly I think if I can attain root.
Sent from my DROID RAZR M using XDA Free mobile app
mrkhigh said:
Thanks for typing all this out I believe it will help me put cm12.1 official on a friends phone.
Are these the steps?
1) verify latest software
2) twrp via Odin
Alt 2) root via apk then use rashr or similar to flash twrp
3)wipe
4)In twrp install official d2att from cm website
5) install current gapps
6) profit
I'm not new to this at all but I've never even touched an att gs3 and I know most devices have their quirks and I don't want to brick.
Also does towel root work on this? I don't mind Odin but I can do this on the fly I think if I can attain root.
Sent from my DROID RAZR M using XDA Free mobile app
Click to expand...
Click to collapse
Yep. You've got it. If you're on the latest and greatest firmware I think the towelroot exploit has been patched, unless geohot has retaken the lead in that arms race.
Easiest way to root on this phone since the bootloaders are unlocked is to just use Odin to flash a custom recovery then use the custom recovery to flash SuperSU. There's just a little trick to it. Store SuperSU.zip somewhere on your phone before flashing the custom recovery. Uncheck everything but f.reset time when you use Odin; don't let it auto reboot. Upon success pull battery. Replace battery and boot straight into recovery with vol up + home + power. If you mess up and boot into unrooted stock ROM with a custom recovery it will get overwritten with a stock recovery and you'll have to Odin custom recovery back onto it and try again.
I would do this to root your stock ROM just to execute this command in a terminal app or adb shell before any more serious flashing:
Code:
su
reboot nvbackup
That fixes a derp and gives you a working efs backup on a few backup partitions built into your phone instead of a blank one. Highly recommended before doing any ROM flashing. This will just look like a pretty normal reboot. You might see a quick flash of tiny blue text if you're watching for it.
Then you're ready to make a nandroid backup (just in case), wipe, and flash away. Take a look at LiquidSmooth if you're looking for a good lollipop ROM.
Nice... So the recovery partition gets rewritten every boot up until a custom ROM is installed and the efs can disappear... This is why you always ask questions.
Thanks for the suggestion on the ROM but I think I'll stick to official cm12.1 it's not my phone and that should be a nice readily updatable bland flavor of lollipop.
Sent from my DROID RAZR M using XDA Free mobile app
mrkhigh said:
Nice... So the recovery partition gets rewritten every boot up until a custom ROM is installed and the efs can disappear... This is why you always ask questions.
Click to expand...
Click to collapse
At the Android 4.3 update it was noticed that flashing a custom recovery would be overwritten by the stock recovery on the initial reboot unless following the method Jason described. Another solution was to delete two lib or .so files. On devices still on stock recovery, stock recovery does not overwrite itself.
There is a blank EFS partition on the device intended for a backup. The nvbackup command populates that partition with an image which will rebuild your EFS if it is lost during a modem update or ROM flash. The loss of EFS does happen. I believe wanam, of the xposed module fame, created an EFS backup tool for Samsung devices. I don't believe he updates it any longer because he rolled the functionality into a partition backup tool, the later is in the PlayStore listed under a different creator name, yet it's still him.
So I'm finally going to take the plunge, and update my boot loader/modem.. I never messed with it because all the Roms I used always worked.. I want to try lollipop, but due to old bootloader my phone won't boot with those Roms..
I'm on UCDLK3 bootloader/modem.. I know I have to upgrade to MJB, NE4, then NJ1 in that order in increments..
So my question: can I upgrade from LK3 straight to MJB with out any problems?? Or is there something I need to flash before I can get to MJB?? I think I can go straight to MJB, but better safe then sorry..
I know downgrading after upgrade most likely will brick.. Any information is appreciated... Oh, its an ATT I747..
coolwhipp420 said:
So I'm finally going to take the plunge, and update my boot loader/modem.. I never messed with it because all the Roms I used always worked.. I want to try lollipop, but due to old bootloader my phone won't boot with those Roms..
I'm on UCDLK3 bootloader/modem.. I know I have to upgrade to MJB, NE4, then NJ1 in that order in increments..
So my question: can I upgrade from LK3 straight to MJB with out any problems?? Or is there something I need to flash before I can get to MJB?? I think I can go straight to MJB, but better safe then sorry..
I know downgrading after upgrade most likely will brick.. Any information is appreciated... Oh, its an ATT I747..
Click to expand...
Click to collapse
Since you are on LK3 you may want to considr applying the free sim/carrier unlock method before upgrading; that is if you are on stock LK3 and you have not previously carrier unlocked your device.
There was an OTA release for the MG2 stock ROM, I believe that was 4.1.2. You may want to go to that before MJB. Did you make the nvbackup suggested by Jason?
Why would I do a carrier unlock, if I'm not switching carriers?? And if I do it, will I be able to use the same carrier?? Just seems like a waisted step for me.. But idk..
Jason's first post, option 2 is how I was planing to update.. And no, I haven't done the nvbackup yet.. How would I apply that backup if things go wrong? Not really sure what a nvbackup is..
Any information is appreciated..
coolwhipp420 said:
Why would I do a carrier unlock, if I'm not switching carriers?? And if I do it, will I be able to use the same carrier?? Just seems like a waisted step for me.. But idk..
Jason's first post, option 2 is how I was planing to update.. And no, I haven't done the nvbackup yet.. How would I apply that backup if things go wrong? Not really sure what a nvbackup is..
Any information is appreciated..
Click to expand...
Click to collapse
There is a command to manually trigger the restore routine. I think it's
Code:
reboot nvrestore
but don't hold me to that. I'd never execute that command except if in dire need. The problem with this phone is there is an automatic routine that can be triggered in the event of a bad flash that will overwrite your nvram with the backup, even if the backup is blank. I don't think the backup stores anything modem specific, but I've never been able to confirm that. So I've always done it again after updating modems (only had to once).
Having the phone sim unlocked can be nice if you plan on traveling internationally. Otherwise, potential future carrier hopping or added resale value are the only reasons to do it.
coolwhipp420 said:
Why would I do a carrier unlock, if I'm not switching carriers?? And if I do it, will I be able to use the same carrier?? Just seems like a waisted step for me.. But idk..
Jason's first post, option 2 is how I was planing to update.. And no, I haven't done the nvbackup yet.. How would I apply that backup if things go wrong? Not really sure what a nvbackup is..
Any information is appreciated..
Click to expand...
Click to collapse
If you will never be switching carriers, nor ever sell/give/trade the phone to someone who will switch, then it is an unecessary step to do the carrier unlock.
I see Jason beat me to answering both of your questions.
I just joined in the past few days because I decided to try different ROMs on my i747. This is my 1st ever post, and I thought I'd try out this rooting and flashing that I'm missing out on.
First of all, THANKS to EVERYONE that posts here for all of the help given to me and that others have used. Nice to see people helping out other people in such ways.
Second, I have successfully put a few different ROMs on my i747 over the past few days and can't believe how easy it was. I was always scared to do it. I decided since the thing was just sitting in a drawer not being used "What's the risk?"
Third, my actual issue...No matter what ROM I have on the i747, it will not connect to Wi-Fi at my work. FYI, I work (in IT ironically) in a very large company with hundreds of access points around the campus. So I know it is not the network, as we would have others with the same issue. It connects to all other (that I've tried so far) Wi-Fi networks with no issues.
I just don't understand all the terms bootloader, firmware, kernel, modem etc. I read decriptions (on here) trying to explain and I just can't grasp it.
I was on stock with whatever the last OTA update from AT&T was. I updated the boatloader (I believe) from NE4 to NJ1 to NJ2 using this thread. At least, I'm assuming I did it right. Nothing failed and the Phone Info app looks like it worked. https://forum.xda-developers.com/galaxy-s3-att/general/ucuemjb-to-ucufne4-firmware-update-t2808654
Anyone can give me any tips on what I need to do to possible get this working? It's not really a huge deal breaker, it's just bugging me as to why it isn't working.
Thanks in advance!
You upgraded the modem/baseband software when updating the bootloader?
audit13 said:
You upgraded the modem/baseband software when updating the bootloader?
Click to expand...
Click to collapse
I'm guessing no. How do I do that? Don't want to brick it.
I found this link, but what firmware am I on? How do I tell?
https://forum.xda-developers.com/galaxy-s3-att/general/modem-4-4-2-modems-i747-i747m-t2856577
Did you flash the zip or did you flash aboot.mbn? If you flashed the zip, the bootloader and modem would have been updated at the same time.
audit13 said:
Did you flash the zip or did you flash aboot.mbn? If you flashed the zip, the bootloader and modem would have been updated at the same time.
Click to expand...
Click to collapse
I flashed the zip.
So an unrooted stock ROM also refuses to connect?
audit13 said:
So an unrooted stock ROM also refuses to connect?
Click to expand...
Click to collapse
I don't know how to go back to stock.