I can't find the cable that came with the phone.
The headphone cable which fits the same hole is a very snug fit and doesn't look like a normal mini usb as has gold rails on both sides on the inside rather than a normal mini usb which only seems to have them on one side.
When I put a normal mini usb cable in, it feels a bit loose and whilst it charges my Orbit, it doesnt get recognised by the PC for synching.
Thoughts????
The actual body of the connector is a slightly different shape with the headphone connector being better matched than a normal mini USB plug, that said using a standard mini USB will not harm the device, I use whatever is available to charge my units, I would have thought it would sync to the PC though mine certainly do - Mike
Its designed that way.
Its quite a clever solution really - it allows the standard 4 pin usb cable to connect, but also has the additional pins for the special headphone connector.
I'm still stuck. My cable charges but won't let me synch?
Anyone got any other thoughts?
Where are you plugging in to the PC? try a direct connection rather than a hub, also make sure no other devices are connected using Active Sync. What version of Active Sync have you got installed on the PC - a few pointers to look in to - Mike
I have a Tilt 2, had it since last March. I've had to have it replaced twice already due to the USB jack getting to the point where it no longer functions except to charge, it won't connect via cable to the pc, nor will it work with the multi-function adapter provided at purchase by HTC.
Is it dangerous/wrong to use after-market chargers/adapters/standard usb cables with the phone??? Am I damaging the usb port by using car chargers/wall chargers, etc that I got from ebay, or is this just a matter of bad design?
It isn't. It looks different, but its not. I believe its ONLY notched like that because not only is that port a USB port, but it also has a few extra 'wires' for connecting a headset to it. (via the HTC adapter)
Of course, the corporate answer is.. Yes using a non HTC Power Adapter could damage your TP2. But unofficially, I doubt it.
I've stopped buying over priced chargers for my phones and will by any Mini-USB charge that I can find. Most will work. The voltage does not matter anymore since USB is a set standard, and any modification to the voltage would not comply to the USB standard, and it wouldn't be USB then.
I've had the same issue with my TP2 (and with the HTC Wing I had before). Check the power adapters itself. I have a RAZR charger I've been using for years, and I think the plug itself has just about had it.
Also take some canned air to the USB port on the phone (while it is powered off and battery removed) and try to remove debris from the USB port. The minuscule little piece of dust could cause a bad connection. Electronic cleaner works better at this. (its LIKE canned air but contains alcohol-based cleaner in the "air". It's available at Radio Shack.) This fixed the problem I was having with my Wing.
And finally, it may just be time for a new phone. The ports just plain wear out from daily plugging and unplugging that adapter in. One slight bend and the port is all out of alignment.. (does it wiggle instead of being a firm connection when you plug in the charger?)
This is why I am waiting for the day these induction charges are standard in phones.. No more power adapters!
I just use a normal USB plug for mine. I don't even fool with the one it came with so I don't get that one confuse with something else. They only notched it like that to make a buck, I would guess.
If you are trying to use Mini USB headphone, only the ones made by HTC will work as it has 11 pins. Standard Mini USB has only 5 pins.
Hi folks!
For the last few weeks, I've started to feel a need of getting a cable that can be used to charge my devices with different ports. My current device, Xperia X has a standard micro USB port, while the other phones I have are equipped with USB type C port. Using connectors is as painful as it can be because those small things often disappear
After browsing the Web for a while, I decided to give IQIYI MFi Certified 3-in-1 USB Charging Cable a try. While I can't pronounce a name of the company, the quality of the cable is really good. It is made of plastic (obviously), it has no braiding and offers three types of connectivity. By default, you can charge/sync micro USB device, but one of two attached connectors quickly changes the type of the charger to either USB Type C or Lightning. I'm not a fan of iPhones, but I lent the cable to one of my friends, and it has passed the compatibility test (ergo, iPhone was not complaining about not original charger).
It's not the cheapest cable available on the market, but you can get it for roughly $12. More info on its Amazon page.
Here's to let everyone know that dex on the Note 10 works with the old Atrix lapdock very well
In case anyone has one lying around and wants to see it in action, you would want the following accessories:
1. USB-C to HDMI adapter ( I opted for 1 with HDMI, USB 3.0 & USB-C in for power )
2. micro HDMI to HDMI cable
3. Female micro HDMI to Female micro HDMI adapter
Optional:
1. Modified USB A to micro USB cable ( more on this later )
2. Female micro USB to Female micro USB adapter
3. USB Cable + Charger to charge your phone
If all you want is to bring up dex on your lapdock, all you need are the HDMI connectors. You will want to use a Bluetooth keyboard & mouse to navigate dex and will not be able to charge your phone.
Going 1 step further, you can use a multi-function USB-C adapter with HDMI, USB OTG & USB in for power.
Here, you would modify a usb cable to give you access to the lapdock keyboard & mousepad. The lapdock was designed to be an all-in-one setup with the Atrix phone, so the 10 hour battery could also charge the Atrix. <-- That's our problem. So you will need to snip the RED wire in the usb cable to prevent the lapdock from potentially frying your phone or other devices.
Theoretically, you can charge the phone using the 2 usb ports on the back of the lapdock, but it's a trickle effect. It'll take forever and you won't be happy. I did it in a pinch & running any applications under dex still consumed my phone's battery. Plugging it into a charger, though, kept my phone @ 100%.
A big caveat here is the mousepad is NOT multitouch, so I still used my bluetooth mouse for the scroll wheel.
Here's where this becomes a lot of fun... the lapdock screen is great for running emulators in a decent window. I plugged in my shield gamepad with a usb cable into the back of my lapdock and was able to play pretty much anything I wanted to. Still plugged into an outlet kept the phone @ 100% while emulating 100%+ speeds.
The larger screen is also very nice for streaming tv/movies.
There is an option in the Dex control panel to output audio through the HDMI cable, so you aren't relying on your phone for audio.
Anyway, if you have one of these gems lying around, it's a great way to extend the value of this phone.
ycavan said:
Here's to let everyone know that dex on the Note 10 works with the old Atrix lapdock very well
In case anyone has one lying around and wants to see it in action, you would want the following accessories:
1. USB-C to HDMI adapter ( I opted for 1 with HDMI, USB 3.0 & USB-C in for power )
2. micro HDMI to HDMI cable
3. Female micro HDMI to Female micro HDMI adapter
Optional:
1. Modified USB A to micro USB cable ( more on this later )
2. Female micro USB to Female micro USB adapter
3. USB Cable + Charger to charge your phone
If all you want is to bring up dex on your lapdock, all you need are the HDMI connectors. You will want to use a Bluetooth keyboard & mouse to navigate dex and will not be able to charge your phone.
Going 1 step further, you can use a multi-function USB-C adapter with HDMI, USB OTG & USB in for power.
Here, you would modify a usb cable to give you access to the lapdock keyboard & mousepad. The lapdock was designed to be an all-in-one setup with the Atrix phone, so the 10 hour battery could also charge the Atrix. <-- That's our problem. So you will need to snip the RED wire in the usb cable to prevent the lapdock from potentially frying your phone or other devices.
Theoretically, you can charge the phone using the 2 usb ports on the back of the lapdock, but it's a trickle effect. It'll take forever and you won't be happy. I did it in a pinch & running any applications under dex still consumed my phone's battery. Plugging it into a charger, though, kept my phone @ 100%.
A big caveat here is the mousepad is NOT multitouch, so I still used my bluetooth mouse for the scroll wheel.
Here's where this becomes a lot of fun... the lapdock screen is great for running emulators in a decent window. I plugged in my shield gamepad with a usb cable into the back of my lapdock and was able to play pretty much anything I wanted to. Still plugged into an outlet kept the phone @ 100% while emulating 100%+ speeds.
The larger screen is also very nice for streaming tv/movies.
There is an option in the Dex control panel to output audio through the HDMI cable, so you aren't relying on your phone for audio.
Anyway, if you have one of these gems lying around, it's a great way to extend the value of this phone.
Click to expand...
Click to collapse
Annoyingly I have a Atrix lapdock but I'm not confident about the rewiring so found a good discounted HP Elite X3 lapdock. Only if someone sold the full cable and adaptor package on eBay for the Atrix
haha, it sounds more complicated than it actually is
just remember that the RED cable in the micro usb cables is power, so that's the only one that needs cutting. What I did was:
1. cut the usb cable in half
2. strip a little bit of the non-RED cables and twisted them together.
3. use electrical tape to cover each of the re-attached cables.
4. pull the red leads back onto the black sheathe
5. use electrical tape to go over the junction between the 2 halves of the cable.
All of the other components are things that are easy to order online, Amazon.
ycavan said:
haha, it sounds more complicated than it actually is
just remember that the RED cable in the micro usb cables is power, so that's the only one that needs cutting. What I did was:
1. cut the usb cable in half
2. strip a little bit of the non-RED cables and twisted them together.
3. use electrical tape to cover each of the re-attached cables.
4. pull the red leads back onto the black sheathe
5. use electrical tape to go over the junction between the 2 halves of the cable.
All of the other components are things that are easy to order online, Amazon.
Click to expand...
Click to collapse
Okay I'll order cables and have a go!
Please confirm the 3rd item in your list is a micro hdmi female to micro hdmi female as elsewhere I have seen micro female to standard female. Thanks
jah said:
Okay I'll order cables and have a go!
Please confirm the 3rd item in your list is a micro hdmi female to micro hdmi female as elsewhere I have seen micro female to standard female. Thanks
Click to expand...
Click to collapse
Yes, I use a micro hdmi female to female adapter for my micro hdmi male to normal hdmi male cable.
Suggestion
My take on these DeX apps is straightforward: they’re not great. If you just use them for simple tasks like texting, copying and pasting small bits of text, or dragging and dropping a file or two, it’s fine. Pushing any harder than that is likely to be a recipe for sorrow, however, as things tend to get laggy pretty quickly. I think that’s more the fault of the desktop software than the phone’s hardware, but regardless, it’s slightly disappointing.
I don’t think that’s a reason to avoid buying the Note 10, which is still an excellent phone. But the experience did get me thinking: why did I and so many others have the objectively irrational hope that DeX would unlock new ways of interacting with your phone?
I think it’s because the idea of making a sole computer sits right next to flying cars in the “this is what the future will be” section of our collective unconsciousness.
alexhalessays said:
My take on these DeX apps is straightforward: they’re not great. If you just use them for simple tasks like texting, copying and pasting small bits of text, or dragging and dropping a file or two, it’s fine. Pushing any harder than that is likely to be a recipe for sorrow, however, as things tend to get laggy pretty quickly. I think that’s more the fault of the desktop software than the phone’s hardware, but regardless, it’s slightly disappointing.
I don’t think that’s a reason to avoid buying the Note 10, which is still an excellent phone. But the experience did get me thinking: why did I and so many others have the objectively irrational hope that DeX would unlock new ways of interacting with your phone?
I think it’s because the idea of making a sole computer sits right next to flying cars in the “this is what the future will be” section of our collective unconsciousness.
Click to expand...
Click to collapse
Also if you can run DeX well on a lapdock, you may not need a Samsung Tab S6!.
alexhalessays said:
My take on these DeX apps is straightforward: they’re not great. If you just use them for simple tasks like texting, copying and pasting small bits of text, or dragging and dropping a file or two, it’s fine. Pushing any harder than that is likely to be a recipe for sorrow, however, as things tend to get laggy pretty quickly. I think that’s more the fault of the desktop software than the phone’s hardware, but regardless, it’s slightly disappointing.
I don’t think that’s a reason to avoid buying the Note 10, which is still an excellent phone. But the experience did get me thinking: why did I and so many others have the objectively irrational hope that DeX would unlock new ways of interacting with your phone?
I think it’s because the idea of making a sole computer sits right next to flying cars in the “this is what the future will be” section of our collective unconsciousness.
Click to expand...
Click to collapse
I use DeX with my lapdock instead of my "real" laptop a lot of the time. My emails are on my phone, contacts are on my phone, pretty much all of the gaming apps I use are on my phone. The only time I ever really need my laptop is to play high end games that aren't ported to Android. Now, if only LoD would come out for the note10... :/
Does the Note 10 support the old 1366x768 resolution on the Atrix Lapdock? I remember getting it going on my Note 8 and it's not a supported resolution leading to really unusable low-res blocky everything on the screen.
bchliu said:
Does the Note 10 support the old 1366x768 resolution on the Atrix Lapdock? I remember getting it going on my Note 8 and it's not a supported resolution leading to really unusable low-res blocky everything on the screen.
Click to expand...
Click to collapse
Yup.
Okay, managed to get my old Motorola Atrix working with my Note 10+. Took a different route to the one described above as the female to female couplers are not easy to source. So I used the Rasberry PI cables for the Atrix and my Samsung Note 8 Dex hub, which was free with the Note 8. But I have to use a BT mouse. Otherwise a good solution. But I would recommend the HP Elite X3 lapdock instead if there is not much a price difference on eBay.
ycavan said:
Here's to let everyone know that dex on the Note 10 works with the old Atrix lapdock very well
In case anyone has one lying around and wants to see it in action, you would want the following accessories:
1. USB-C to HDMI adapter ( I opted for 1 with HDMI, USB 3.0 & USB-C in for power )
2. micro HDMI to HDMI cable
3. Female micro HDMI to Female micro HDMI adapter
Optional:
1. Modified USB A to micro USB cable ( more on this later )
2. Female micro USB to Female micro USB adapter
3. USB Cable + Charger to charge your phone
If all you want is to bring up dex on your lapdock, all you need are the HDMI connectors. You will want to use a Bluetooth keyboard & mouse to navigate dex and will not be able to charge your phone.
Going 1 step further, you can use a multi-function USB-C adapter with HDMI, USB OTG & USB in for power.
Here, you would modify a usb cable to give you access to the lapdock keyboard & mousepad. The lapdock was designed to be an all-in-one setup with the Atrix phone, so the 10 hour battery could also charge the Atrix. <-- That's our problem. So you will need to snip the RED wire in the usb cable to prevent the lapdock from potentially frying your phone or other devices.
Theoretically, you can charge the phone using the 2 usb ports on the back of the lapdock, but it's a trickle effect. It'll take forever and you won't be happy. I did it in a pinch & running any applications under dex still consumed my phone's battery. Plugging it into a charger, though, kept my phone @ 100%.
A big caveat here is the mousepad is NOT multitouch, so I still used my bluetooth mouse for the scroll wheel.
Here's where this becomes a lot of fun... the lapdock screen is great for running emulators in a decent window. I plugged in my shield gamepad with a usb cable into the back of my lapdock and was able to play pretty much anything I wanted to. Still plugged into an outlet kept the phone @ 100% while emulating 100%+ speeds.
The larger screen is also very nice for streaming tv/movies.
There is an option in the Dex control panel to output audio through the HDMI cable, so you aren't relying on your phone for audio.
Anyway, if you have one of these gems lying around, it's a great way to extend the value of this phone.
[/QUOT
ycavan said:
Here's to let everyone know that dex on the Note 10 works with the old Atrix lapdock very well
In case anyone has one lying around and wants to see it in action, you would want the following accessories:
1. USB-C to HDMI adapter ( I opted for 1 with HDMI, USB 3.0 & USB-C in for power )
2. micro HDMI to HDMI cable
3. Female micro HDMI to Female micro HDMI adapter
Optional:
1. Modified USB A to micro USB cable ( more on this later )
2. Female micro USB to Female micro USB adapter
3. USB Cable + Charger to charge your phone
If all you want is to bring up dex on your lapdock, all you need are the HDMI connectors. You will want to use a Bluetooth keyboard & mouse to navigate dex and will not be able to charge your phone.
Going 1 step further, you can use a multi-function USB-C adapter with HDMI, USB OTG & USB in for power.
Here, you would modify a usb cable to give you access to the lapdock keyboard & mousepad. The lapdock was designed to be an all-in-one setup with the Atrix phone, so the 10 hour battery could also charge the Atrix. <-- That's our problem. So you will need to snip the RED wire in the usb cable to prevent the lapdock from potentially frying your phone or other devices.
Theoretically, you can charge the phone using the 2 usb ports on the back of the lapdock, but it's a trickle effect. It'll take forever and you won't be happy. I did it in a pinch & running any applications under dex still consumed my phone's battery. Plugging it into a charger, though, kept my phone @ 100%.
A big caveat here is the mousepad is NOT multitouch, so I still used my bluetooth mouse for the scroll wheel.
Here's where this becomes a lot of fun... the lapdock screen is great for running emulators in a decent window. I plugged in my shield gamepad with a usb cable into the back of my lapdock and was able to play pretty much anything I wanted to. Still plugged into an outlet kept the phone @ 100% while emulating 100%+ speeds.
The larger screen is also very nice for streaming tv/movies.
There is an option in the Dex control panel to output audio through the HDMI cable, so you aren't relying on your phone for audio.
Anyway, if you have one of these gems lying around, it's a great way to extend the value of this phone.
Click to expand...
Click to collapse
Hi, I'm trying to do the same. I've got a Note 10+ hooked up to my old Atrix lapdock. Note goes to a multiport adapter. From the adapter's USB-A output, I ran a cable to the lapdock's micro-USB. From the adapter's HDMI out, I ran a cable to the lapdock's mini-HDMI. With that, I can use the lapdock's screen but no keyboard or trackpad.
I ran a cable from the adapter's USB-C to one of the lapdock's rear USB ports, after snipping the red wire, but still no kb/m. The phone does charge like this though.
What have I done wrong? TIA.
Click to expand...
Click to collapse
The USB cable going to the micro-USB port on the lapdock needs to have the red cable snipped. What I did was to snip the red cable and pull both snipped ends back, then use a bit of electrical tape to cover that part of the wire so the snipped ends don't accidentally touch anything.
The USB cable(s) going to the rear of the lapdock are fine unmodified.
Dude/Dudette thank you so much!!! It's only because I came across your thread here that I decided to try and resurrect my trusty old lapdock, and now it works perfectly!
Thanks for replying so quickly. I modified the wrong cable - snipped the red wire on the USB cable running to the rear USB-A port. Doh!
ycavan said:
The USB cable going to the micro-USB port on the lapdock needs to have the red cable snipped. What I did was to snip the red cable and pull both snipped ends back, then use a bit of electrical tape to cover that part of the wire so the snipped ends don't accidentally touch anything.
The USB cable(s) going to the rear of the lapdock are fine unmodified.
Click to expand...
Click to collapse