Related
I followed this
(Setting up the Android SDK
Download the file from above
Unzip to your desktop
Take the "android-sdk-windows" folder and move it to the root of your hard drive (C:\)
Right click on My Computer and click properties
Select the Advanced Tab or Advanced System Setting (Vista/Windows 7)
Select Environment Variables...
Press New
For Variable Name type: adb
For Variable Value type: C:\android-sdk-windows\tools)
and when I try to do this
(1. Run SDK Setup.exe
2. If it gives you an error go to settings and click on "Force http//....."
3. Select all options and let it download and install)
I have issues cause I dont have the SDK Setup.exe I have searched for it and can not find it, please help thanks Davey
also I installed the windows version
http://developer.android.com/sdk/index.html
If you've added the tools folder to your path, you don't need to install anything, just type "adb <command>" in the cmd prompt and you're good to go.
if you talking about this
For Variable Name type: adb
For Variable Value type: C:\android-sdk-windows\tools)
yes i have done it and it still wont work. I have my phone is debugging and on charge only and when i open the cmd and type in adb it gives me is not recoginzied as an internal or external command, operable program or batch file,
then when i type (android-sdk-windows\tools) it gives me the system cannot find the path specified. I am lost
ok So on my other computer I got some progress, I opened sdk manager and got it all updated and the only real problem i am having now is (this is dumb) but I dont know my sdk name, like when it says
cd C:\**your sdk name**\tools (Press Enter)
I have been trying C:\android-sdk-windows\tools
thanks for the help! Davey
thank you I got it running now!!!!!! I did what you said and added it to the path not just a new varibable, thank you very much!!!
Hi,
I thought I'd add this here because I've recently starting using OSX after building my own hackintosh out of PC parts. I got very fed up with Windows and the need for drivers all over the shop so I'm moved over now.
I've also just got into flashing my HTC Desire and it was made very easy by lots of the guys here. One thing that will always be useful when rooting and flashing your phone is ADB. There are lots of guides out there for ADB on Windows but I wanted to run in natively in OSX.
After a lot of research and a few failed attempts .... I've now worked out how to run ADB in OSX.
What you will need:
A Mac
USB cable
Android SDK for OSX- http://developer.android.com/sdk/index.html
At the time of writing this the version was "android-sdk_r08-mac_86" so please have a look at the above link and let me know if you can't find that same version.
So download the zip file and I would extract it to a folder where you are happy to keep it such as within your user home folder i.e. Macintosh HD/Users/{Your User Name} and for my mac it is Users/siedkins which is how I have my OSX set up.
Then open then still in Finder, open "android-sdk-mac_86" then "tools".
Now launch Terminal - ⌘ + space then type Terminal or Applications>Utilities>Terminal
Now drag and drop the file called "android" in the "tools" folder into your terminal window and you should see something like:
/Users/siedkins/android-sdk-mac_86/tools/android
Then hit enter - this should load Android SDK
Next go to Available Packages on the left and Android Repository > Android SDK Platform-tools, revision 1 -tick the box and hit "Install Selected"
It should download and install the Platform Tools which includes ADB !!!!
Now quit Android SDK after it has downloaded and go back into Finder. Now you should see a new folder "platform-tools" in the "android-sdk-mac_86" folder. Open that and you can now see a file called adb.
Now .... I am going to show you how to make your life a lot easier in Terminal to run ADB without having to navigate to the folder every time you want to launch it.
Go back to your Terminal window and type (or copy & paste):
Code:
cd ~
The screen should then look like
NAME_OF_YOUR_MACHINE:~ USERNAME$
For me I have:
Mac-Pro:~ siedkins$
Next, type
Code:
touch .bash_profile
to create your new bash / path file
Next, type
Code:
open -e .bash_profile
to open it in TextEdit.
Now into Text Edit please copy:
Code:
export PATH=${PATH}:
Then go into Finder and navigate your your "android-sdk-mac_86" folder. Then click on the "platform-tools" folder and drag and drop this into TextEdit at the end of the code above that you copied. Mine looks like:
export PATH=${PATH}:/Users/siedkins/android-sdk-mac_86/platform-tools/
Yours should look like:
export PATH=${PATH}:insert your path to the "platform-tools" folder in your Android SDK here
All you need is that one line. Then Save and exit TextEdit and then very importantly QUIT TERMINAL.
***** If you have issues being able to save the file at all then please jump to the bottom of the post*****
Now ........ to turn on USB Debugging in your handset Settings > Applications > Development > USB Debugging - ticked and also go to Settings > Connect to PC > Default connection type > Charge Only and also UNTICK "Ask me ..." there also. You can always go back here and change these settings back.
Now plug in your phone to a USB port. I noticed that if I plugged my phone into one of the standard USB ports on the front of my machine I couldn't see the phone further down the line and if I plugged it into a powered USB port on the front (I have an "akasa AK-ICR-08" which has a powered connector behind the 5 USB ports. But you guys will probably be using a MacBook or MacPro and there shouldn't be any issues with the power to your USB ports.
Now to launch ADB - re-open terminal (remember that you had quit it - very important!) then type in:
Code:
adb devices
And you should see:
List of devices attached
HXXXXXXXXXX device
where XXXXXXXX is your unique phone ID.
Now you can run all of your favourite ADB commands straight by typing:
adb shell
etc straight into Terminal. I won't go into that here as there are plenty of guides about what to do with ADB once it's installed!
Now you have ADB setup on your Mac and can run it without the need for installing HTC Sync - un-installing it - loading some modified drivers over the top !!!!
It all just works !!!!!!
Please drop me a line if you have any queries about this !
******************
If you are have user account issues such as Terminal or TextEdit says that you can't do anything then try adding "sudo" to the front of your terminal command as this will allow you to execute the account as a superuser or root user for OSX! ROOT!!! Note that you will have to enter your password to enable the superuser access rights and you won't see anything as you type in your password.
i.e. try:
Code:
sudo touch .bash_profile
then
Code:
sudo /Applications/TextEdit.app/Contents/MacOS/TextEdit .bash_profile
(slight change in the coding here to ensure that TextEdit opens
Or you could do:
Code:
sudo pico .bash_profile
This will open up the Pico text editor instead of TextEdit. Here you will have to type out all of the text then you press "ctrl+x" to exit and then you can save on the next screen. To check that has worked you can then open the file in terminal again and check it with the normal command:
Code:
open -e .bash_profile
******************
Please see post #37 for How To Use ADB Over WIRELESS !!!!
************************************************************************
EDIT - 27th JAN 2010
FastBoot
I've now found you all a precompiled version of Fast Boot:
http://developer.htc.com/adp.html
Please download and unzip the precompiled version for OSX to your "SDK/platform-tools" folder.
Rename the unzipped file from "fastboot-mac" just to "fastboot". You need to fix the permissions of the fastboot file using CHMOD in Terminal.
In Terminal navigate to your "SDK/platform-tools" folder and then type:
Code:
ls
You should see all of the files in your "platform-tools" folder such as adb, aapt, fastboot, etc.
Then type:
Code:
chmod 777 fastboot
PLEASE NOTE THAT I AM ASSUMING THAT YOU HAVE CHANGED THE FILE NAME ABOVE !
Now with the permissions fixed you should be able to run fastboot.
Connect your phone via USB and set to "charging only". Then turn off your phone and leave the USB in. Then hold the back key and then turn your phone on again. You will have a white screen with 3 skateboarding androids on.
Now in Terminal type:
Code:
fastboot devices
And you should see your unqiue phone ID! (Note that you have to be at that white screen with the skateboarders for the "fastboot devices" code to run!
Now you have a fully working fastboot !!!
Sorry this explanation is a bit short - I did write out a longer one but my browser crashed and I lost it all. However if you cannot follow the above then I think it's maybe best that you don't use fastboot as you could seriously brick your phone.
NOTE - I HAVE NEVER USED FASTBOOT TO FLASH A RADIO OR PHONE SO I PROBABLY WON'T BE ABLE TO HELP IF YOU GET ERRORS IN USING FASTBOOT OR FLASHING YOUR DEVICE ! The above information is how to shortcut the navigation to the folder. Please don't blame me if you break the recovery image of your phone!
Thanks for such a thorough step by step guide. But Im having a problem I followed the directions and at the last step I get "permission denied". Any tips for me would be truly appreciated. Thanks
dhoshman said:
Thanks for such a thorough step by step guide. But Im having a problem I followed the directions and at the last step I get "permission denied". Any tips for me would be truly appreciated. Thanks
Click to expand...
Click to collapse
which last step ?
dhoshman said:
Thanks for such a thorough step by step guide. But Im having a problem I followed the directions and at the last step I get "permission denied". Any tips for me would be truly appreciated. Thanks
Click to expand...
Click to collapse
What version of MacOS? Also are you sure your device is properly rooted? I'm assuming you are getting the error when typing "adb devices"?
EDIT: That's what I get for being distracted while typing this.. ;-)
The easiest way to get the sdk is by using homebrew, which is an amazingly useful tool. https://github.com/mxcl/homebrew
Code:
brew install android-sdk
It doesn't add adb to your path however, you have to do that manually by adding /usr/local/Cellar/android-sdk/r8/platform-tools to your path.
Hope that makes it a little bit easier.
I found that on my mac using terminal I have to always start the adb commands with a ./ otherwise it wouldn't work right. This might be common knowledge for some, but I'm a terminal newbie
So, for example:
./adb devices
Thanks for the walk through
This work great. I put the the SDK folder on the root of Macintosh HD and renamed it to AndroidSDK. Then in the .bash_profile my path was /AndroidSDK/platform-tools/ . I then made a backup of my SD card with adb pull from /mnt/sdcard to my local machine.
mun-key said:
I found that on my mac using terminal I have to always start the adb commands with a ./ otherwise it wouldn't work right. This might be common knowledge for some, but I'm a terminal newbie
So, for example:
./adb devices
Click to expand...
Click to collapse
Kind of weird. To me that would mean that you're path variable isn't setup correctly. Usually the ./ before a command means to run the command from the current directory and ignore the path variable.
It doesn't even have to be this complicated. Download the sdk, whatever files you want to push to your phone put it in the same folder. Then do the commands (./adb push). Simple.
Great and easy tutorial! Got it working in 5min ^_^
madj42 said:
Kind of weird. To me that would mean that you're path variable isn't setup correctly. Usually the ./ before a command means to run the command from the current directory and ignore the path variable.
Click to expand...
Click to collapse
Ok - that makes sense now. And reading Krisrk's reply, that's exactly how I did it.
On my device I only needed to push a single file. Don't really need adb anymore. Your post was like 12-hours too late for me though. I spent 3 hours trying to figure out why it wouldn't work, then saw the ./ in a youtube video. After that I was rooted with a new rom in minutes
thanks for all the great info guys
Just wanted to thank you! I already had ADB working on my Mac OSX but didn't have the "environment variables" in the .bash_profile. So now I can just use adb commands directly without going into the finder and find the adb!
Also, kudos for the very detailed guide with your own examples, that reads very well!
Thanks for the comments guys.
I know that you can navigate to the SDK folder and just run it from there but I thought that people might like the above guide to do the shortcut once and then never have to jump around folders again in terminal which is a bit of a pain. Plus my method removes the need for the "./" prefix.
anyways I'm easy I'm sure that everyone will have their own preferred method if you already use adb on OSX
i cannot get beyond the command:
touch .bash_profile
the terminal returns permission denied. what do i need to add or what am i doing wrong?
What type of user account do you have set up in OSX?
System Prefs > Accounts
Also what about trying the following in Terminal
Code:
sudo touch .bash_profile
And then enter the password for your user profile?
Any better?
Thanks for this!!!!!
Nobody ever shows macs love.
Sent From My HTC Evo 4G Using Tapa Talk Pro!
siedkins said:
What type of user account do you have set up in OSX?
System Prefs > Accounts
Also what about trying the following in Terminal
Code:
sudo touch .bash_profile
And then enter the password for your user profile?
Any better?
Click to expand...
Click to collapse
it popped up and asked my password, then it said i entered the wrong one and i never was asked this again. this is incredibly frustrating as i cannot even get it to work in windows
edit: ok got to the part where i bring up text edit, but it will not let me save. states i do not have permission to save. is there a way i can turn off this password crap for the time being? all i want to do is push files to my phone, i can't even get this far
Ok...
I'm trying not to look stupid, but for gods sake, im stuck at the first command. I copy paste cd~ and nothing happens. press enter nothing. I've been reading up on terminal and i still feel quite stupid considering how im stuck on step one
edit: got it! I got lost going back into the same terminal and not closing the android sdk window. there fore I was still in the sdk and not telling the computer anything. a dur. Opening a new terminal and doing all of the steps did the trick. Thanks for this btw!
thanks for the detailed guide. i've been looking all over the web for a guide to setup adb for MAC. followed the steps here and now, i'm able to use ADB on my macbook. YAY!!
monstereo said:
thanks for the detailed guide. i've been looking all over the web for a guide to setup adb for MAC. followed the steps here and now, i'm able to use ADB on my macbook. YAY!!
Click to expand...
Click to collapse
Hey just a random note, nice prof pic stig ftw
guys i really need help installing SDK, for some reason it cannot detect "adb" command after installation
That's most likely because you haven't added the install location to either to path (windows xp) or envoirnment variable (win vista/7). What OS do you run?
mstrk242 said:
That's most likely because you haven't added the install location to either to path (windows xp) or envoirnment variable (win vista/7). What OS do you run?
Click to expand...
Click to collapse
window 7dsfsdfdsf
The platform tools folder under where android sdk installed (depends on where you chose when you setup), needs to be added to the envoirnment variables under windows 7. Go to the control panel, system properties, and advanced. On the bottom is where you'll see the envoirnment variables. Add the directory to the local path, and then you should be good. (Provided all other install steps were successful, of course.)
mstrk242 said:
The platform tools folder under where android sdk installed (depends on where you chose when you setup), needs to be added to the envoirnment variables under windows 7. Go to the control panel, system properties, and advanced. On the bottom is where you'll see the envoirnment variables. Add the directory to the local path, and then you should be good. (Provided all other install steps were successful, of course.)
Click to expand...
Click to collapse
ok i found it but not sure what to add, i install everything under c: drive (c:/android-sdk-windows)
EDIT: nvm got it thanks!
G1_enthusiast said:
ok i found it but not sure what to add, i install everything under c: drive (c:/android-sdk-windows)
Click to expand...
Click to collapse
Ok, on the envoirment variables page, on the bottom, scroll down to path
then edit
do not delete what's already in there, add
;c:\android-sdk-windows\platform-tools;
right at the end of it (so it's ;, the path... i believe it's under the folder platform-tools. you might want to check the folder to make sure the adb file is in there. I haven't done it on windows in a while though, but that should be the folder.)
You'll have to close and re-open any command prompts you have open after making this change, so the new path takes affect. Just open a command prompt and type adb. If you get command not found it's not correct.
ADB
Android Debug Bridge
Very useful program made itself by Google for Programmers and developers. Its based on command line and basically communicates with your Android to respond to certain commands. There is vast amount of knowledge about adb but its most useful commands limit to getting:-
Logcat:-
A real time log of what is happening in background of our devices. It is really useful for developers to see which component has malfunctioned and helps to narrow down their search for what failed and what needs to be fixed. Several times users are asked to give logcats of their devices which are giving errors. We will go in detail that how to get logcats in every and easiest way possible.
App Installation and Management:-
adb proves really handy if you want to install apks directly from your PC or want to batch install or delete them.
Shell Execution:-
You must have heard of Terminal Emulator. It is an app for android to execute shell commands(linux commands) which are basically present as applets in /system/bin, /system/sbin or /system/xbin(in our case) folders. A very imporant applet called busybox is installed there mainly used for execution of basic commands during root browsing or ROM installation. Many times updater script of ROMs use busybox commands to install it. Well, these commands can be initiated from your device too but they can be initiated from adb also making it easy for programmers.
Pushing and Pulling:-
Most used commands of adb. adb makes it a piece of cake for new device developers to get an ideo of structure and basic knowledge of devices by pulling command. We can pull out i.e copy any files or folders from our devices to our PC, even the root directories without rooting the devices. It help rooters and ROM chefs of new devices to get an idea and implement their mods on them. Pushing is also very useful command. It copies your files and folders from PC to your device. Very useful in pushing some /system apps and other things
Remounting and setting permissions
Basic commands:-
Of-course basic commands such as reooting and rebooting in recovery ode and download mode are supported.
Others:-
There are several other features of adb such as fastboot, aapt, etc
Setting up ADB
Pre Requirements:-
A little amount of brain
PC(This is a windows guide, if asked I will add linux and mac guide later)
Java Runtime environment or Java Developing kit
Your Device Drivers
An Android Device
USB Debugging MUST be turned ON in the device for ADB to see it & Developer options is hidden in Android 4.2 and
above, Hitting Build number 10 times in
About Phone/Tablet reveals the menu (Thanks lilHermit for reminding me to add it)
Assuming you all these ready and working properly, we continue
If you are having trouble completing Pre-Requisites, there are several guides featuring them too
Start
1. First Download Android SDK. Roughly about 70 MB
2. There may be any compressed zip file or exe file
If zip file, then extract it to C:\android-sdk
If exe file then double click on it and install it in C:\ Drive(or any other drive you want)
3. Now to get adb and other tools, you need to download 'Platform Tools'
To download them, go to the android-sdk folder and double click on SDK Manager
It will ask you which package to download? However, it is your choice which package to Download, but here, we will only talk about platform
Tools. So, simply tick on Platform Tools and click on install. Once you have done it. Go to the platform-tools folder in the directory where you installed android-sdk. You will find several files there like adb, fastboot, aapt, etc
4. Now, you can backup the whole folder of android-sdk to any external storage that will make you not download package
again if you want to. You can have it placed in any computer and run it as it does not require registry to work
5. Now, you are just one step away from using adb. Next step is SKIPPING SETTING ENVIRONMENT VARIABLE (If you however want to set environment variables.)
We can easily append the sdk platform-tools and tools folder to your systems environmental path variable directly from command line(cmd) by simply issuing one command and performing a system reboot:
Code:
SETX PATH "%PATH%;SDK_Install_Path\platform-tools;SDK_Install_Path\android-sdk-windows\tools" -m
Just replace the "SDK_Install_Path" in the above with the proper path of your SDK installation. Example: C:\android-sdk-windows
Many guides on internet say that it is to be done for making it easy for users and if you have some basic knowledge of Command Prompt,
you will know that to execute any application with command prompt, you first need to change the directory to the one where application is
placed. And to skip changing the directories every time you open CMD, you need to put that application is environment variable. Howeve, we will not do so.
6. Type cmd in the search bar. Copy cmd.exe from there. Go to the directory where you have installed android-sdk. Go to platform-tools folder. Paste cmd there, right click on it and in the settings, select Run as Administrator.
7. You are done. Now what to do in it?
ADB Commands
Type adb in command prompt. And several commands will show up on your screen. It is very difficult to analyse these all commands, so we will only talk about most used and important commands
Connect your device via USB cable
And open the CMD in platform-tools folder(Make a shortcut of it on desktop). And type the suitable commands
Code:
adb devices
Will show the list of devices attached to the PC andtheir serial numbers. If this shows up correctly on your PC, then it means that everything is fine for continuing.
Logcat
Code:
adb logcat
It will display the real time log of your device
Best time to do it is when your device boots up
Now, many users ask me how to copy the logcat and upload it from CMD
There are several methods:-
1. Right click on the Title Bar of Command Prompt. Hover the cursor over edit and select mark. Select all the things you want to copy and then click enter. All the things will be copied to clipboard.
2. This is the correct way of getting logcat saved.
Code:
adb logcat > logcat.txt
This command will create a logcat.txt document in platform-tools folder with the complete logcat of the device. Ofcourse you can type any name instead of logcat.txt
3. I prefer taking logcat this way as it neatly compiles logs of different time
Code:
adb logcat -v long > logcat.txt
This is a very nice way to get logcat.
Installing Apps
Code:
adb install %PATH OF APK%
This will install an app on your Android
For example, if my app AreeB.apk is in G:\ drive (G:\AreeB.apk)
Then I will type
Code:
adb install G:\AreeB.apk
Be sure your apk is not in a folder that has space in its name, else the command will break at space bar.
For eg:-
G:\Program Files\AreeB.apk
Note:
If you have spaces in path of apk, you can execute the command without breakage if you include the path inside quotes. (Thanks to etcman)
Eg:-
Code:
adb install "G:\Program Files\AreeB.apk"
Mounting
However, I never found any problem in tweaking with system files with adb, but some users said that they couldn't do it, so the problem was that their system partition was mounted as Read Only(R/O)
So, it is necessary now to tell how to mount system partition as Read Write(R/W)
Code:
adb remount
It is easiest way to do so, if it does not work then
There is another method that we will discuss in ADB Shell commands section
Pushing and Pulling
For pushing,
Type
Code:
adb push %PATH TO BE PUSHED% %PATH WHERE TO BE PUSHED%
Suppose I have an app named SystemUI.apk(PATH = G:\SystemUI.apk) which I want to push in /system/app/ on my android(or in other words, install an app as a system app). Then I would type
Code:
adb push G:\SystemUI.apk /system/app/
More examples
G:\Dance.txt file to be pushed in Dance folder in sdcard
Code:
adb push G:\Dance.txt /sdcard/Dance/
OR
Code:
adb push G:\Dance.txt /mnt/sdcard/Dance/
G:\Movies folder to be transferred in SDCARD in Videos Folder
Code:
adb push G:\Movies /sdcard/Videos/
G:\system\framework\framework-res.apk to be pushed in /system/framework/
Code:
adb push G:\system\framework\framework-res.apk /system/framework/
For pulling,
push command replaces with pull and paths are swapped
Code:
adb pull %PATH TO BE PULLED FROM% %PATH TO PLACE PULLED FILE%
Example,
All system apps are to be pulled to G:\ROM\system\app
Code:
adb pull /system/app G:\ROM\system\app\
build.prop to be extracted to desktop
Code:
adb pull /system/build.prop C:\Users\Areeb\Desktop\
However, if a folder is in platform-tools folder, you don't need to type full path
Suppose if I type
Code:
adb pull /system/ system
Then a folder named system will be created inside platform-tools with all the files in system in it
If a file is in platform-tools folder, then also no need to type full path
For example,
There is an app name DeskClock.apk in this folder then, to push it to /system/app, type
Code:
adb push DeskClock.apk /system/app/
ADB Shell Commands
This mode of adb allows you to execute linux shell commands from your PC
These commands can aldo be executed through the mobile using Terminal Emulator
To initiate shell mode
Type
Code:
adb shell
You will get an prompt like this
sh-3.2#
Now you are in shell mode
adb commands won't work here and a new set of commands will work here. But we will only go in a little detail here.
Assuming you are in adb shell mode, I will only type commands that will work on shell. Note:- These commands won't work if you type them alone on cmd. But, these command will directly work on your mobile's Terminal Emulator
As these commands can also work on mobile, I am going to tell you a way of taking logcat on mobile
Type
Code:
logcat
You will see log of your device
To save this
Type
Code:
logcat > /sdcard/log.txt
A file named log.txt will be generated in sdcard
Uninstalling Applications
Code:
cd /data/app
This will change the directory to /data/app
Code:
ls
This will show the list of files in there
Suppose, there is an app named com.opera.browser (Opera Mobile) you want to uninstall it
Type
Code:
rm -r com.opera.browser
This will uninstall the app
Mounting Command:-
Code:
mount -o rw,remount /dev/block/mtdblock3 /system
Miscellanous commands:-
su: Initiates root request
du: Shows file foldrs and size
date: Shows todays date
ls: Shows list of directory
cd: Changes working directory
rm: Removes the file
logcat: Displays logcat
mount: Mounts the partition
busybox: Busybox Applets
Forgot next ones, will write later
All credits go to
iamareebjamal
For writing this up.
What is the easiest method to root HTC one that is on 4.2.2?
cis314 said:
What is the easiest method to root HTC one that is on 4.2.2?
Click to expand...
Click to collapse
Here's what you're looking for...it's your only option if you don't want to mail it anywhere:
http://forum.xda-developers.com/showthread.php?t=2473644
Sent from my HTC6500LVW using XDA Premium 4 mobile app
cis314 said:
What is the easiest method to root HTC one that is on 4.2.2?
Click to expand...
Click to collapse
I finally got my htc one rooted and flashed plenty of roms so far I had a lot of stupid issues with rooting but guys on here were very helpful even tho I had to ask questions over and over again to troubleshoot problems. Easiest way was to dl rumrunner and get s-off and bootlader loaded. Them just flash a recovery. My buggiest prob was getting all files on my comp into a separate folder and opening a cmd from that folder. Also remember to always run stuff on ur comp as an administrator!
how did you flash recovery? I am having such a hard time flashing recovery!
cis314 said:
how did you flash recovery? I am having such a hard time flashing recovery!
Click to expand...
Click to collapse
put recovery.img in adb folder
open cmd prompt
type fastboot flash recovery nameofrecvovery.img
andybones said:
put recovery.img in adb folder
open cmd prompt
type fastboot flash recovery nameofrecvovery.img
Click to expand...
Click to collapse
Easier to just type "fastboot flash recovery (drag recovery.img here)"
that way you can save the recovery on your desktop or wherever. I wish adb/fastboot could be ran from anywhere and not just the adb folder though.
exzacklyright said:
Easier to just type "fastboot flash recovery (drag recovery.img here)"
that way you can save the recovery on your desktop or wherever. I wish adb/fastboot could be ran from anywhere and not just the adb folder though.
Click to expand...
Click to collapse
if you set it up correctly it can be, I can put the .img in my C folder, open a cmd and run commands, but it would still need the adb file.
so put the recovery whereevere your adb.exe is..
you can even make a folder called apktool in c: (thats what I have, that has adb.exe, fastboot, smali, baksmali, etc)
andybones said:
if you set it up correctly it can be, I can put the .img in my C folder, open a cmd and run commands, but it would still need the adb file.
so put the recovery whereevere your adb.exe is..
you can even make a folder called apktool in c: (thats what I have, that has adb.exe, fastboot, smali, baksmali, etc)
Click to expand...
Click to collapse
Adding the path to the adb.exe (and fastboot.exe) directory, to the environment variables, allows you to run ADB and Fastboot from any directory.
In Windows, right+click "Computer", select "Properties", click on "Advanced System Settings". On the "Advanced" tab select "Environment Variables" . In the bottom window find the "Path" string and add the path to ADB directory to the end.
The Paths in the string are separated by a semi-colon, so for example, I've added the path to my platform-tools directory like such:
;c:\android-sdk\platform-tools
This can also be done in Linux and Mac OS X, environment variables are stored in a hidden text file in the home folder. You can also adde it by typing the the PATH command in a terminal. Just Google it. Only takes a minute and saves time by not having to "CD" to your ADB directory every time.
EDIT: This Tut. has nice screen shots
http://forum.xda-developers.com/showthread.php?t=757233