Develop Bugs

[Q] Reset Htc One X To Stock With Ruu

Hello,
I am currently trying to reset my HTC One X from Cyanogenmod 10.1 to the Stock ROM. I have HBOOT 1.39.0000, the Bootloader is relocked and its unbranded with a cid 102.
I am using Windows 8.
I already tried the following RUU versions:
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed
and
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed
But i always get the Error 140, which tells me that something is wrong with my bootloader version.
What am i doing wrong?
Thank you.

Whats the outcome of
Fastboot getvar verion-main
Does it match the ruu number ? And did you relock the bootloader before running the ruu with admin rights ?

it says: version main: 3.18.401.1
And yes i relocked the bootloader before starting the RUU

I have the same issue:
cid: HTC__032
version-main : 3.20.401.3
cannot go back to stock due to version beeing to high. Is there any other way?

sunilson said:
it says: version main: 3.18.401.1
And yes i relocked the bootloader before starting the RUU
Click to expand...
Click to collapse
Go here : http://forum.xda-developers.com/showthread.php?t=1975140
Download the nandroid backup which matches your version-main and cid! and then restore it
---------- Post added at 06:39 PM ---------- Previous post was at 06:37 PM ----------
craoul said:
I have the same issue:
cid: HTC__032
version-main : 3.20.401.3
cannot go back to stock due to version beeing to high. Is there any other way?
Click to expand...
Click to collapse
Try restoring the 3.20.401.1 backup for you CID?! Don't know if it will work or not!

vin4yak said:
Try restoring the 3.20.401.1 backup for you CID?! Don't know if it will work or not!
Click to expand...
Click to collapse
Yeah that works flash back the 3.14 stock recovery and you are also able to update again to 401.3

Mr Hofs said:
Yeah that works flash back the 3.14 stock recovery and you are also able to update again to 401.3
Click to expand...
Click to collapse
I restored 3.20.401.3 but I do not know what is the stock recovery for this firmware

craoul said:
I restored 3.20.401.3 but I do not know what is the stock recovery for this firmware
Click to expand...
Click to collapse
Here you go!
https://www.dropbox.com/s/ms7vd18vb9watr8/stock recovery 3.14.img

vin4yak said:
Here you go!
https://www.dropbox.com/s/ms7vd18vb9watr8/stock recovery 3.14.img
Click to expand...
Click to collapse
Nothing Here
The file you're looking for has been deleted or moved.

http://db.tt/pO3jumMa
Probably my old links. I had to re-organize my dropbox folders and names

Mr Hofs said:
http://db.tt/pO3jumMa
Probably my old links. I had to re-organize my dropbox folders and names
Click to expand...
Click to collapse
Yeah!! I had bookmarked it :good:

vin4yak said:
Here you go!
https://www.dropbox.com/s/ms7vd18vb9watr8/stock recovery 3.14.img
Click to expand...
Click to collapse
OK, flashed recovery, but from fastboot if I chose recovery the phone just goes back to fast boot. How do I know that the recovery is flashed correctly ?

When the command window says OKEY

Ok so I now restored the Stock ROM with the Nandroid Backup and everything seems to work, except the touchscreen XD
The phone doesnt respond to my finger.
Did i do something wrong?

sunilson said:
Ok so I now restored the Stock ROM with the Nandroid Backup and everything seems to work, except the touchscreen XD
The phone doesnt respond to my finger.
Did i do something wrong?
Click to expand...
Click to collapse
did you flash also boot.img and recovery.img?
steps are:
restore with nandroid
flash boot.img
flash recovery.img
lock or do not lock bootloader (this one is your choice)

sunilson said:
Ok so I now restored the Stock ROM with the Nandroid Backup and everything seems to work, except the touchscreen XD
The phone doesnt respond to my finger.
Did i do something wrong?
Click to expand...
Click to collapse
Did you wipe everything?
1. fastboot flash boot boot.img (The one from nandroid backup)
2. fastboot erase cache
3. Go to recovery and flash this : http://d-h.st/kG0
4. Now restore nandroid backup
5. Wipe cache/dalvc (Just in case)
6. Reboot.

for updates you need also the stock recovery

Is it possible to revert to 3.20.401.1 from 4.18.401.2 by using 3.20.401 nandroid backup?
If yes, what else to do with boot.img?

ntquartex said:
Is it possible to revert to 3.20.401.1 from 4.18.401.2 by using 3.20.401 nandroid backup?
If yes, what else to do with boot.img?
Click to expand...
Click to collapse
You have to flash boot.img from your nandroid backup after or before , restore the nandroid backup file.

Trying to put stock rom on HOX

Hey guys
I have a HOX with the following :
CID : HTC_032
ROM VER 3.20.401.3
1.39.0000
Running now latest Venom.
I would like to put stock rom on it ! Can you suggest the proper RUU because i can't find anywere the corect one with my specifications.
Is is possible to install a 3.20.401.1 on 3.20.401.3 ?
Many thanks

Minasmorgul said:
Hey guys
I have a HOX with the following :
CID : HTC_032
ROM VER 3.20.401.3
1.39.0000
Running now latest Venom.
I would like to put stock rom on it ! Can you suggest the proper RUU because i can't find anywere the corect one with my specifications.
Is is possible to install a 3.20.401.1 on 3.20.401.3 ?
Many thanks
Click to expand...
Click to collapse
There is no JB 3.20.x.x RUU for now, only some of 3.14.x.x JB but because of S-ON you can not flash lower that phone have, (and i assume that you did not make your own backup before flashing custom rom because if you did you only need to make restore from custom recovery and flash corresponding boot.img from backup) so your only solution is to use nandroid backup for your CID pick nandroid 3.20.401.3 but if there is no matching try nearest lower number!
Pay attention to use nandroid backup for CWM or TWRP - i do not know which custom recovery you have, and how to use nandroid backup - look at mine signature link
Some nandroid backup collections:
1. http://forum.xda-developers.com/showthread.php?t=2189048
2. http://forum.xda-developers.com/showthread.php?t=1975140

I've managed to download a NAND but i get a error at resotring /system ? what should I do ?
I've also installed CMW , first i had TWRP !

Minasmorgul said:
I've managed to download a NAND but i get a error at resotring /system ? what should I do ?
I've also installed CMW , first i had TWRP !
Click to expand...
Click to collapse
Post results of this comand:
fastboot getvar version-main

hpnxfox said:
Post results of this comand:
fastboot getvar version-main
Click to expand...
Click to collapse
3.14.401.31

Minasmorgul said:
3.14.401.31
Click to expand...
Click to collapse
Ah you are lucky then, 3.14.401.31 is your main version, not 3.20.401.X and you can revert to stock with RUU or nandroid.
1. RUU http://bugsylawson.com/files/file/1...-r-radio-5120416229-release-302015-signedexe/
2. And for nandroid backup same that i told you before just download 3.14.401.31 versions not 3.20.401.X
For RUU - you need to relock bootloader before executing from windows, and this will also delete custom recovery!

I have same problem.. more or less.. but my versio-main is 3.14.401.600 ... can I put 3.14.401.31 ???

valinuxx said:
I have same problem.. more or less.. but my versio-main is 3.14.401.600 ... can I put 3.14.401.31 ???
Click to expand...
Click to collapse
No, you can't use this RUU, and unfortunately i did not find compatible RUU or nandroid backup for your phone, what is your CID?

hpnxfox said:
No, you can't use this RUU, and unfortunately i did not find compatible RUU or nandroid backup for your phone, what is your CID?
Click to expand...
Click to collapse
HTC_304 ... So I can't go back to stock ??
Can I install stock ROM from recovery ?? Which one ?? Without changing the bootloader of course (1.28) ??

valinuxx said:
HTC_304 ... So I can't go back to stock ??
Can I install stock ROM from recovery ?? Which one ?? Without changing the bootloader of course (1.28) ??
Click to expand...
Click to collapse
As far as i know at this moment you can not reverse to stock..no RUU or nandroid for this cid or main-version.. Only solution for you is that somebody with same Cid and main version rom gives you nandroid backup that is made with custom recovery.. I do not get it, why people dont make backups -this is main thing in all how to root, use custom roms or flash guides! Sorry and good luck!

second hand phone.. with already unlocked bootloader(1.28) and custom ROM (arhd 12.0) on it.... I always do a Nandroid Back up of my phones....

[Q] Going back to stock ROM

Hi all. I want to go back to a stock ROM for my HTC One X. I searched and found some usefull informations, but most links are dead...I found a nandroid backup, but when I tried to update to official OTA 4.2.2, it said security warning and did not continued. Yes, I was RELOCKED and stock recovery.
So, If anyone can help me with a RUU, will be appreciated!
Code:
INFOversion-bootloader: 1.39.0000
INFOversion-main: 3.20.401.1
L.E.: CID HTC__E11
Thank you very much!

CaracalSef said:
Hi all. I want to go back to a stock ROM for my HTC One X. I searched and found some usefull informations, but most links are dead...I found a nandroid backup, but when I tried to update to official OTA 4.2.2, it said security warning and did not continued. Yes, I was RELOCKED and stock recovery.
So, If anyone can help me with a RUU, will be appreciated!
Code:
INFOversion-bootloader: 1.39.0000
INFOversion-main: 3.20.401.1
L.E.: CID HTC__E11
Thank you very much!
Click to expand...
Click to collapse
Ask mike1986. if he still has an Odexed version of his Stock 3.20.401.1 ROM http://forum.xda-developers.com/showthread.php?t=1546970.

CaracalSef said:
Hi all. I want to go back to a stock ROM for my HTC One X. I searched and found some usefull informations, but most links are dead...I found a nandroid backup, but when I tried to update to official OTA 4.2.2, it said security warning and did not continued. Yes, I was RELOCKED and stock recovery.
So, If anyone can help me with a RUU, will be appreciated!
Code:
INFOversion-bootloader: 1.39.0000
INFOversion-main: 3.20.401.1
L.E.: CID HTC__E11
Thank you very much!
Click to expand...
Click to collapse
This is full stock from mike1986 shared for you STOCK ROM 3.20.401.1

And here is one with the correct cid too
http://db.tt/KT37hCCD

Mr Hofs said:
And here is one with the correct cid too
http://db.tt/KT37hCCD
Click to expand...
Click to collapse
Ok, I tried with that and the OTA update won't install. Let me tell you the steps I took:
1) Wipe ROM (/data, /cache, /system)
2) Restore the backup you provided
3) Fastboot flash boot.img from the backup you provided
4) Fastboot flash recovery.img from the backup you provided
5) Fastboot oem lock
6) Booted the ROM and download the OTA
7) Tried to follow on screen steps, but it's stuck in fasboot and under "RELOCKED" status it sayis "Security warning!"
What I did wrong? What should I do? Thank you!

CaracalSef said:
Ok, I tried with that and the OTA update won't install. Let me tell you the steps I took:
1) Wipe ROM (/data, /cache, /system)
2) Restore the backup you provided
3) Fastboot flash boot.img from the backup you provided
4) Fastboot flash recovery.img from the backup you provided
5) Fastboot oem lock
6) Booted the ROM and download the OTA
7) Tried to follow on screen steps, but it's stuck in fasboot and under "RELOCKED" status it sayis "Security warning!"
What I did wrong? What should I do? Thank you!
Click to expand...
Click to collapse
you don't need to lock it for a nandroid or OTA, only for RUU.
Unlock bootloader again, flash boot.img, restore backup. then flash STOCK recovery. The one in the backup will not be stock, AFAIK you can use the 3.14 stock recovery from here>>>>>http://forum.xda-developers.com/showthread.php?t=1975140 its quite a way down the page after all the nandroids

nogotaclue said:
you don't need to lock it for a nandroid or OTA, only for RUU.
Unlock bootloader again, flash boot.img, restore backup. then flash STOCK recovery. The one in the backup will not be stock, AFAIK you can use the 3.14 stock recovery from here>>>>>http://forum.xda-developers.com/showthread.php?t=1975140 its quite a way down the page after all the nandroids
Click to expand...
Click to collapse
I unlocked the bootloader, then flashed that stock 3.14 recovery, downloaded the OTA and now it's upgrading. Thank you very much!

Thant said:
This is full stock from mike1986 shared for you STOCK ROM 3.20.401.1
Click to expand...
Click to collapse
CaracalSef said:
Ok, I tried with that and the OTA update won't install. Let me tell you the steps I took:
1) Wipe ROM (/data, /cache, /system)
2) Restore the backup you provided
3) Fastboot flash boot.img from the backup you provided
4) Fastboot flash recovery.img from the backup you provided
5) Fastboot oem lock
6) Booted the ROM and download the OTA
7) Tried to follow on screen steps, but it's stuck in fasboot and under "RELOCKED" status it sayis "Security warning!"
What I did wrong? What should I do? Thank you!
Click to expand...
Click to collapse
nogotaclue said:
you don't need to lock it for a nandroid or OTA, only for RUU.
Unlock bootloader again, flash boot.img, restore backup. then flash STOCK recovery. The one in the backup will not be stock, AFAIK you can use the 3.14 stock recovery from here>>>>>http://forum.xda-developers.com/showthread.php?t=1975140 its quite a way down the page after all the nandroids
Click to expand...
Click to collapse
I just wanted to post and say thanks for uploading those 3.20 files. I'd been trying to revert to stock to do the update to 4.18 and been hitting a brick wall for 5 hours using the 3.18 files that are knocking around.
To the OP it does work, I got it working first go by flashing the system image using philz touch and then fastboot flashing the boot image and recovery image (and running fastboot erase cache after each step).
Anyway, thanks again.

[Q] CM11 M9 to Stock

Hi,
I have an UK HOX which is running CM11. I am giving it my father and want to revert to stock beforehand. I don't have a nandroid backup & can't seem to find one which will work. Is this possible or will I be stuck on CM?
I'm currently on HBOOT 1.36 & radio 5.1204 (not sure if that's relevant). Please let me know if there's more info I can provide.

GX45 said:
Hi,
I have an UK HOX which is running CM11. I am giving it my father and want to revert to stock beforehand. I don't have a nandroid backup & can't seem to find one which will work. Is this possible or will I be stuck on CM?
I'm currently on HBOOT 1.36 & radio 5.1204 (not sure if that's relevant). Please let me know if there's more info I can provide.
Click to expand...
Click to collapse
give the result from command fastboot getvar version-main and then we will see

Thanks,
version-main: 3.14.206.27

GX45 said:
Thanks,
version-main: 3.14.206.27
Click to expand...
Click to collapse
now you must find nandroid backup with this numbers for One X or ask @T3nd3rB33£ to upload for you

Here's the link to the post,
http://forum.xda-developers.com/showthread.php?p=55550765
Hope it helps

GX45 said:
Thanks,
version-main: 3.14.206.27
Click to expand...
Click to collapse
This is what you search and don't forget to say thanks to T3nd3rB33£

Thanks to you both!

Hi just read the thread properly, I have confused you in my pm, Thant is right, your on hboot 1.36 so you need my nand not glenbrownies. This is the stock nand from before the jb update which has the hboot version 1.1? You will need to update in settings about phone check for updates and you'll then have sense 5 installed.
You can install a nand which has a lower hboot version but not a nand that has a higher hboot version.

T3nd3rB33£ said:
Hi just read the thread properly, I have confused you in my pm, Thant is right, your on hboot 1.36 so you need my nand not glenbrownies. This is the stock nand from before the jb update which has the hboot version 1.1? You will need to update in settings about phone check for updates and you'll then have sense 5 installed.
You can install a nand which has a lower hboot version but not a nand that has a higher hboot version.
Click to expand...
Click to collapse
No worries. Thanks a million for the help
Can I just get one last noob question out the way - in the nandroid backup folder, are they both the stock boot.img and recovery.img I need to flash after restoring? Or do I need to find a separate stock boot & recovery img?

I've successfully reverted back to stock. Only issue I have now is that the official OTA update won't install. It downloads and boots into the stock recovery, then about a third of the way up the progress bar the process stops and the recovery icon changes to the red triangle with the exclamation mark in it.
I've also tried it again after doping a factory reset with no luck. Any experience with this happening?

GX45 said:
I've successfully reverted back to stock. Only issue I have now is that the official OTA update won't install. It downloads and boots into the stock recovery, then about a third of the way up the progress bar the process stops and the recovery icon changes to the red triangle with the exclamation mark in it.
I've also tried it again after doping a factory reset with no luck. Any experience with this happening?
Click to expand...
Click to collapse
you must to put the stock recovery for 3.14 base

T3nd3rB33£ said:
Hi just read the thread properly, I have confused you in my pm, Thant is right, your on hboot 1.36 so you need my nand not glenbrownies. This is the stock nand from before the jb update which has the hboot version 1.1? You will need to update in settings about phone check for updates and you'll then have sense 5 installed.
You can install a nand which has a lower hboot version but not a nand that has a higher hboot version.
Click to expand...
Click to collapse
Thant said:
you must to put the stock recovery for 3.14 base
Click to expand...
Click to collapse
I've flashed the stock recovery & still no joy. Also tried flashing the 'firemware.zip' file from the OTA and trying to install the it manually with no success, either.

GX45 said:
I've flashed the stock recovery & still no joy. Also tried flashing the 'firemware.zip' file from the OTA and trying to install the it manually with no success, either.
Click to expand...
Click to collapse
take the recovery.img from firmware.zip and flash it report back the backup must be with the same numbers like your

Thant said:
take the recovery.img from firmware.zip and flash it report back the backup must be with the same numbers like your
Click to expand...
Click to collapse
Just flashed the recovery from the firmware.zip file & the OTA update fails at same stage.
My bootloader is unlocked, should it be relocked for this to work?
Edit: Relocked bootloader & tried with the same result. I noticed the hboot img file in the 'firmware' zip is a higher version than mine (1.36) ... Would it be worth flashing this then trying again?

GX45 said:
Just flashed the recovery from the firmware.zip file & the OTA update fails at same stage.
My bootloader is unlocked, should it be relocked for this to work?
Edit: Relocked bootloader & tried with the same result. I noticed the hboot img file in the 'firmware' zip is a higher version than mine (1.36) ... Would it be worth flashing this then trying again?
Click to expand...
Click to collapse
don't use the recovery from OTA update use previos one or this for your main version and must be recovery for your main version
other way is to lock the bootloader flash firmware.zip then flash custom rom or stock nandroid backup. But you need to see your main version again after flashing the zip

Thant said:
don't use the recovery from OTA update use previos one or this for your main version and must be recovery for your main version
other way is to lock the bootloader flash firmware.zip then flash custom rom or stock nandroid backup. But you need to see your main version again after flashing the zip
Click to expand...
Click to collapse
Here's the 'getvar all' info
version: 0.5a
version-bootloader: 1.72.
version-baseband: 5.1204.
version-cpld: None
version-microp: None
version-main: 4.18.206.4
product: endeavoru
platform: HBOOT-T30S
modelid: PJ4610000
cidnum: O2___001
devpower: 92
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
Now the wifi and SIM card/mobile data won't work. Where do I go from here?

GX45 said:
Here's the 'getvar all' info
version: 0.5a
version-bootloader: 1.72.
version-baseband: 5.1204.
version-cpld: None
version-microp: None
version-main: 4.18.206.4
product: endeavoru
platform: HBOOT-T30S
modelid: PJ4610000
cidnum: O2___001
devpower: 92
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
Now the wifi and SIM card/mobile data won't work. Where do I go from here?
Click to expand...
Click to collapse
Now you must unlock your bootloader flash Philz 5.15.9 find nand backup 4.18.206.4 copy to sd card install it flash boot.img and flash recovery from OTA and you are full stock or you can install custom rom near to stock like Maximus HD or ARHD or som kitkat roms

Thant said:
don't use the recovery from OTA update use previos one or this for your main version and must be recovery for your main version
other way is to lock the bootloader flash firmware.zip then flash custom rom or stock nandroid backup. But you need to see your main version again after flashing the zip
Click to expand...
Click to collapse
Thant said:
Now you must unlock your bootloader flash Philz 5.15.9 find nand backup 4.18.206.4 copy to sd card install it flash boot.img and flash recovery from OTA and you are full stock or you can install custom rom near to stock like Maximus HD or ARHD or som kitkat roms
Click to expand...
Click to collapse
Awesome, that's worked! Got the JB update restored, runs great! It does say there's another update to install but I get an HTC error saying basically the device is rooted (I installed the new recovery & relocked bootloader, it's def not rooted anymore) but I don't care to be perfectly honest.
Thank you guys so much for all your help!

[Q] HTC One X Stuck at Boot Loop. Need RUU!!!!

HTC One X stuck at boot loop after installing custom ROM.
CID: BSTAR301
Hboot: 1.12
How to fix it? I don't have any backup of stock ROM which was working fine on it. Please help me to get Stock ROM for this device. I've spent hours but I'm not able to find RUU for BSTAR301 CID. Anyone please give me RUU for this device.!!!

hamza_0o7 said:
HTC One X stuck at boot loop after installing custom ROM.
CID: BSTAR301
Hboot: 1.12
How to fix it? I don't have any backup of stock ROM which was working fine on it. Please help me to get Stock ROM for this device. I've spent hours but I'm not able to find RUU for BSTAR301 CID. Anyone please give me RUU for this device.!!!
Click to expand...
Click to collapse
give the result from command fastboot getvar version-main

Thant said:
give the result from command fastboot getvar version-main
Click to expand...
Click to collapse
Version Main: 2.17.513.2

hamza_0o7 said:
Version Main: 2.17.513.2
Click to expand...
Click to collapse
NOw you must to find nandroid backup with this numbers or read this thread for your CID

Thant said:
NOw you must to find nandroid backup with this numbers or read this thread for your CID
Click to expand...
Click to collapse
How I can use Nandroid backup to make my phone working again?

hamza_0o7 said:
How I can use Nandroid backup to make my phone working again?
Click to expand...
Click to collapse
unlock bootloader, flash custom recovery. restore nandroid backup, flash stock recovery and then update you have update to 1.39 hboot

Thant said:
unlock bootloader, flash custom recovery. restore nandroid backup, flash stock recovery and then update you have update to 1.39 hboot
Click to expand...
Click to collapse
I've figured out the problem! (Y)
1. Installed Twrp Recovery
2.Mounted SD Card
3.Placed Cyanogen 9 ICS ROM in SDcard
4.Installed Cyanogen from recovey
Now how I can update my Hboot version from 1.12 to 1.29 or above? As I'm not able to find Jellybean RUU for my CID (Bstar301 SPAIN).

hamza_0o7 said:
I've figured out the problem! (Y)
1. Installed Twrp Recovery
2.Mounted SD Card
3.Placed Cyanogen 9 ICS ROM in SDcard
4.Installed Cyanogen from recovey
Now how I can update my Hboot version from 1.12 to 1.29 or above? As I'm not able to find Jellybean RUU for my CID (Bstar301 SPAIN).
Click to expand...
Click to collapse
Are you read the thread where I give you there have link to some spanish forum with explanation I don't speak spahish but I see most of the comand to flash manualy hboot and I see it is for hboot 1.39 or 1.31 I don't remember good the numbers