Develop Bugs

[Q] Galaxy Note GT-N7100 Update KIES Root

Hey Guys.
I am from Germany, so sorry for my bad English. I know of no better forum.
At Windows Mobile-times I was active here. Then I switched to Apple.
Now I am happy owner of a Galaxy Note II GT-N7100 here in Germany (without branding).
Many things have changed and are new to me. I have been searching but found no exact answers to my questions. I also read a lot of different informations. Therefore, I am careful and rather ask.
First the facts, then the questions:
Galaxy Note GT-N7100 II with Build Number JRO03C.N7100XXALJ1 (image infos)
Rooted with Odin and cwm6-root n7100.tar
Everything runs fine with no problems and I am fully satisfied with the smartphone.
This morning, the info came for an OTA update.
I'm not a fan of OTA, so I tried to update via KIES. ( firmware image)
PDA: LJ3 / PHONE: LJ2 / CSC: LJ2 (DBT)
But that did not work because my device was modified. (Image error kies)
Then I looked at Sammobile and discovered the complete firmware. ( Sammobile image)
Now my questions:
1. Is there a way to install the update via KIES?
If so, is there a tutorial somewhere, perhaps Step by Step?
2. If I install the 900MB firmware from Sammobile using Odin, all settings and apps are gone?
3. If I update the firmware, I have to roote again?
4. Can I roote regardless of the firmware with cwm6 n7100.tar-root?
My wish is a guide or tips for the following:
I want my Galaxy Note to keep up to date without each time reinstall.
I want ONLY root and keep those rights.
Maybe I'll try again later also Custom Roms.
I welcome all the tips. If there is somewhere exact answers for that I am pleased with the link. And I'm sorry if I may have already read over answers.
Thx
Fabster

Fabster2010 said:
Hey Guys.
I am from Germany, so sorry for my bad English. I know of no better forum.
At Windows Mobile-times I was active here. Then I switched to Apple.
Now I am happy owner of a Galaxy Note II GT-N7100 here in Germany (without branding).
Many things have changed and are new to me. I have been searching but found no exact answers to my questions. I also read a lot of different informations. Therefore, I am careful and rather ask.
First the facts, then the questions:
Galaxy Note GT-N7100 II with Build Number JRO03C.N7100XXALJ1 (image infos)
Rooted with Odin and cwm6-root n7100.tar
Everything runs fine with no problems and I am fully satisfied with the smartphone.
This morning, the info came for an OTA update.
I'm not a fan of OTA, so I tried to update via KIES. ( firmware image)
PDA: LJ3 / PHONE: LJ2 / CSC: LJ2 (DBT)
But that did not work because my device was modified. (Image error kies)
Then I looked at Sammobile and discovered the complete firmware. ( Sammobile image)
Now my questions:
1. Is there a way to install the update via KIES?
If so, is there a tutorial somewhere, perhaps Step by Step?
2. If I install the 900MB firmware from Sammobile using Odin, all settings and apps are gone?
3. If I update the firmware, I have to roote again?
4. Can I roote regardless of the firmware with cwm6 n7100.tar-root?
My wish is a guide or tips for the following:
I want my Galaxy Note to keep up to date without each time reinstall.
I want ONLY root and keep those rights.
Maybe I'll try again later also Custom Roms.
I welcome all the tips. If there is somewhere exact answers for that I am pleased with the link. And I'm sorry if I may have already read over answers.
Thx
Fabster
Click to expand...
Click to collapse
Hi and welcome
It's normal that with kies you cannot upgrade your firmware on a rooted device.
So
1) use normaly the sammobile firmware you dont go to lose nothing, normally they are non wipe file
2) buy odin mobile on market and flash the firmware with this program, the pay version give you the opportunity of have root.

+1 mobile odin :good:
You can inject root, super user and mobile odin when flashing new firmware
Very handy.
crissyx said:
Hi and welcome
It's normal that with kies you cannot upgrade your firmware on a rooted device.
So
1) use normaly the sammobile firmware you dont go to lose nothing, normally they are non wipe file
2) buy odin mobile on market and flash the firmware with this program, the pay version give you the opportunity of have root.
Click to expand...
Click to collapse

First, thanks for the replies.
So that I understand correctly:
I go get MobilOdin, download the latest firmware (900mb) of sammobile. Then I store the firmware on the SD card and update with MobileOdin. In MobilOdin I select root. All settings and apps keep exist?

Now i read from another user:
As we all know Samsung devices has two or more ways to upgrade their software
Either by OTA & KIES which will keep the user data & preferences or the Odin which will wipe the cache & data .
Thats what i mean ... whats right, whats wrong?

Fabster2010 said:
Now i read from another user:
As we all know Samsung devices has two or more ways to upgrade their software
Either by OTA & KIES which will keep the user data & preferences or the Odin which will wipe the cache & data .
Thats what i mean ... whats right, whats wrong?
Click to expand...
Click to collapse
Just flashed latest update from sammobile with mobile odin, and nothing got wiped!

I have now flashed with mobil odin and everything works perfect, many thanks for your tips and replies.

[Q] Can't Update to latest firmware using OTA or Kies

When I first bought this phone, I bought it from amazon and it was an AT&T locked Galaxy s3. I unlocked it using an app called unlockunit and I'm now using it with GoSmart, which is a part of T-Mobile, if I remember correctly.
Anyhow, when I plug my phone into the computer to connect to Kies, Kies does not recognize the phone. When I use OTA updates, the update is interrupted before it starts. Does anyone have a solution to this problem? I want to update to the Android version 4.3 but I can't so I'm stuck using 4.1.2

Okay, I got my phone to connect to kies, I have no idea why it was not earlier, but sometimes it tells me I have to reboot my device... but when I hit tools>firmware upgrade and initialisation, it says [ 'SGH-I747' does not support initilising. ] My current firmware version, according to Kies, is PDA:MG2 / PHONE:MG2 / CSC:MG2 (ATT).
Please help, I'm still trying to update my phone to the latest firmware.
Could I possibly update my phone to the latest firmware by rooting my phone?

[Q] ATT S3 Upgrade to 4.4

I am not very much familiar with all intricacies of Android system but i have played around rooting and putting customer firmwares on few devices.
I have AT&T Galaxy S3 with following detals:
Baseband: I747UCUEMJB
Version: 4.3
I had the device rooted in the past but recently un-rooted it and reset the flash counter as well and did factory reset. Did all that since i wanted to use ISIS and couldn't make it work on a rooted S3. Seems it used to work before till they updated ISIS app to patch it.
Now AT&T got 4.4 update and my phone detects it, downloads it but while installing fails at 32%. I have seen many threads where people faced similar issues due to their phones being rooted. Seems something on my phone didn't reset to default.
I found one post which mentions that i can download UCUEMJB_to_UCUFNE4_Firmware_update.zip and load it to phone using TWRP. As i understand, this will update the baseband but android version still remains at 4.3 (?). Is that the path i should be looking for or i am shooting in wrong direction? I want to stay on default firmware since i like to use ISIS till they keep running those cashback promos
Would appreciate some feedback.

Download MJB firmware (thread in General) and flash with Odin. You can stop there or try the ota again.

DocHoliday77 said:
Download MJB firmware (thread in General) and flash with Odin. You can stop there or try the ota again.
Click to expand...
Click to collapse
Thanks for the reply.
Just to confirm so that i don't mess up, i will apply the following(is modem same as firmware?) and then try OTA.
I747UCUEMJB: modem_CWM_I747UCUEMJB.zip

No. The modem is only one part of the firmware. Firmware includes bootloaders, kernel, system, modem and more.

Force Updating to 4.4.2 + Unlock

Hi All,
My wife's old AT&T Galaxy Note 2 - never been rooted - is still on 4.3.
So I went to Software update and it is saying that the update has been interrupted and I have to wait 24 hours. So I keep on restoring to factory defaults / changing the time trick -- and It still fails. I have clue why it can't pick up the updates from the AT&T Servers.
Is there a way to update it forcefully - Like using ODIN or something? The last time I tried this (even with the official AT&T ROM - it tripped the counter of my Galaxy Note 1). -- is it the same case with ODIN and Note 2?
Also, the more important question is - will I lose my SIM unlock if I update to 4.4.2 via ODIN or other methods?
Long time ago, I have used the trick *#197328640# and it worked wonders. Will I lose it in 4.4.2 ?
As much as possible, I don't want to root it because I will sell it and he doesn't want rooted phones.
Thank you.

keplenk said:
Hi All,
My wife's old AT&T Galaxy Note 2 - never been rooted - is still on 4.3.
So I went to Software update and it is saying that the update has been interrupted and I have to wait 24 hours. So I keep on restoring to factory defaults / changing the time trick -- and It still fails. I have clue why it can't pick up the updates from the AT&T Servers.
Is there a way to update it forcefully - Like using ODIN or something? The last time I tried this (even with the official AT&T ROM - it tripped the counter of my Galaxy Note 1). -- is it the same case with ODIN and Note 2?
Also, the more important question is - will I lose my SIM unlock if I update to 4.4.2 via ODIN or other methods?
Long time ago, I have used the trick *#197328640# and it worked wonders. Will I lose it in 4.4.2 ?
As much as possible, I don't want to root it because I will sell it and he doesn't want rooted phones.
Thank you.
Click to expand...
Click to collapse
Here if you haven't figured it out yet try this
http://forum.xda-developers.com/showthread.php?t=2618447
This will downgrade to 4.1.1 then ota to 4.3 but it wont root it and thats what your problem

Unable to update S3 past 4.1.1

Hi. A few months ago I received a phone for my daughter from my mom. I reset the phone back to factory settings and it's working fine. I had to reset it back to factory again after locking myself out recently but other than that there hasn't been any issues until now. I picked up an activity tracker for my daughter recently and it wasn't connecting to the phone like it should even though it was listed as a compatible device.
Turns out the phone is at Android 4.1.1 and when I try to update it OTA it says there are no updates to download. So I tried updating through Kies and it isn't connecting the phone. At this time I started to do some more research.
The knox counter is at 2 and the device status is modified, which I have never rooted the phone and my mother can't even set up her wifi printer and most certainly can't root a phone. I installed triangle away but the phone needs to be rooted in order to do it's magic.
Do I need to root the phone in order to get the knox counter back to 0? Will this put the phone back where I can get android updates for it? I don't know where to start.

Boot into download mode. Do you see anything about warranty bit? If you do, the updates are working because it sounds like the phone has a stock 4.1.1 rom on a 4.3 or newer bootloader.

sarie15 said:
Hi. A few months ago I received a phone for my daughter from my mom. I reset the phone back to factory settings and it's working fine. I had to reset it back to factory again after locking myself out recently but other than that there hasn't been any issues until now. I picked up an activity tracker for my daughter recently and it wasn't connecting to the phone like it should even though it was listed as a compatible device.
Turns out the phone is at Android 4.1.1 and when I try to update it OTA it says there are no updates to download. So I tried updating through Kies and it isn't connecting the phone. At this time I started to do some more research.
The knox counter is at 2 and the device status is modified, which I have never rooted the phone and my mother can't even set up her wifi printer and most certainly can't root a phone. I installed triangle away but the phone needs to be rooted in order to do it's magic.
Do I need to root the phone in order to get the knox counter back to 0? Will this put the phone back where I can get android updates for it? I don't know where to start.
Click to expand...
Click to collapse
If you would to reset the knox counter to 0x0... yes, you have firstly to root your phone, then install triangle away.

delete

Knox cannot be reset to 0x0 once it has been changed to 0x1.
Since the word "modified" appears in download mode, this leads me to conclude that the phone may be rooted and cannot receive ota updates.
It is strange that the phone is running 4.1.1 with Knox as Knox was not introduced until 4.3.
Before flashing anything, you need to confirm the phone's current bootloader and modem.

audit13 said:
Knox cannot be reset to 0x0 once it has been changed to 0x1.
Since the word "modified" appears in download mode, this leads me to conclude that the phone may be rooted and cannot receive ota updates.
It is strange that the phone is running 4.1.1 with Knox as Knox was not introduced until 4.3.
Before flashing anything, you need to confirm the phone's current bootloader and modem.
Click to expand...
Click to collapse
How do I confirm the bootloader and modem? I literally am learning all the language and how all of this works as I go. All I know is I have a phone that is running 4.1.1 and won't update and when I went to the download odis (I think that's what it is called) said it was tripped 2 times where I was supposed to read the knox number.
I ran to the mobile store it's connected to and they said the T Mobile Galaxy S3 phone that I-Wireless puts out was never given an update past 4.1.1 Not sure how true that is. If that's the case, I probably need to root the phone anyway to force an update (Is that what I would need to do to get it at least to 4.3?

there is an app in the playstore called samsung info. download it and it should tell you bootloader and modem.
pretty sure it is true that 4.1.1 was the last.
heres the link to the xda thread , which of course will lead you to the playstore ; but will tell more detail about the app :
http://forum.xda-developers.com/showthread.php?t=2609045
[tp_noparse]W2NlbnRlcl1baW1nXWH0dHBzOi8vZGwuZHJvcGJveHVzZXJjb25OZW50LmNvbS91LzlzNjl3OTl3L0ltYWdlcy9TaWduYXR1cmVzL3ZhcmlvdXMvcmRiLmdpZlsvaW1nXVsvY2VudGVyXQ==[/tp_noparse]

Bootlegger version: T999UVDLJA
Modem Board: MSM8260A
Some other info that might help
Root Existence: No
Latest Firmware: Not Found
Knox Warranty Void: Warranty bit not found

Try flashing the stock lja firmware from here: http://www.sammobile.com/firmwares/database/SGH-T999/

way way off topic. @audit13 , is your avatar your cat & is its name audit13.
[tp_noparse]W2NlbnRlcl1baW1nXWH0dHBzOi8vZGwuZHJvcGJveHVzZXJjb25OZW50LmNvbS91LzlzNjl3OTl3L0ltYWdlcy9TaWduYXR1cmVzL3ZhcmlvdXMvcmRiLmdpZlsvaW1nXVsvY2VudGVyXQ==[/tp_noparse]

Avatar is a cat named Arthur.

I've never flashed something. Sorry if I ask a hundred questions as I go through this.
So you want me to flash the 4.1.1 that's already on the phone? Is that correct? Can I ask why? (I'm just wanting to know the meaning behind the action so understand what your thought process is so I can understand for next time.)
Just follow the directions underneath?

Is this what we're doing?
[GUIDE] How-To Completely Unroot Your Galaxy SIII |Zero Flash Counter|"Normal" Status http://forum.xda-developers.com/showthread.php?t=2136921

if i'm guessing right about what @audit13 & @ arthur (lol) are asking you to do is flash that firmware since the samsung info app said "firmware not found".
you might be confusing firmware version with android version. you say your on 4.1.1 which is the android version.
also if i'm not mistaken that firmware will match your bootloader which is a good thing.
[tp_noparse]W2NlbnRlcl1baW1nXWH0dHBzOi8vZGwuZHJvcGJveHVzZXJjb25OZW50LmNvbS91LzlzNjl3OTl3L0ltYWdlcy9TaWduYXR1cmVzL3ZhcmlvdXMvcmRiLmdpZlsvaW1nXVsvY2VudGVyXQ==[/tp_noparse]

Ah! That makes sense. In the process of it now. We'll see what happens and if I'm successful with it.

Success. It has auto updated to Android 4.3 after this. Thanks for your help.

good to hear.
that @ arthur (a.k.a. @audit13) knows his androids/tech/uhh...stuff.:good:
[tp_noparse]W2NlbnRlcl1baW1nXWH0dHBzOi8vZGwuZHJvcGJveHVzZXJjb25OZW50LmNvbS91LzlzNjl3OTl3L0ltYWdlcy9TaWduYXR1cmVzL3ZhcmlvdXMvcmRiLmdpZlsvaW1nXVsvY2VudGVyXQ==[/tp_noparse]