Yesterday i removed the battery of my spice mi 436 without switching it off. I know its my mistake! After replacing memory card when i tried to switch it back on it showed me some error saying "data Encryption error" it mentioned factory reset required! I tried to reset from the recovery menu! but it din't work so i download stock ROM from the below link
This is the link where i downloaded stock rom of my mi 436/
I flashed it using flashool. Process completed successfully, but as other people mentioned on that page i got stuck on start screen symbol of spice
half screen is b&w lines and half is flickring with yellow spice logo in background.. The phone doesn't start now!!!! im sure its not damaged physically. Since there is no developers available for this phone i could not find Working solution for this problem!
I think may be there might be some problem with the rom files! I'm not sure though, i'm just guessing. I cant use my phone anymore ..
Can anyone help me with this problem?? There are other people who are facing the same problem! Please help me.. Thanks in advanced!!
or can anyone Please give me the link or upload flashable zip of mi 436 stock ROM ?? so that i can flash it via recovery!
Related
Hi, i didn't know where to post so i just posted this here since i saw other huawei posts in here. (Moderators pls move if misplaced).
I've got a big problem!
I have got a Rooted Huawei Y300 and i've unofficially unlocked the bootloader with DC-Unlocker successfully, and have CWM Recovery installed!
Now here's the deal, i've downloaded Cyanogenmod 11 (4.4) but after i tried to install it, it stopped halfway with "set_metadata_recursive: some changes failed E:Error in /sdcard/name_of_rom_here" (Status 7).
I tried other CM's getting the same error.
Than i tried to reflash to original firmware (V100R001C00B175) from the huawei website, but since i bricked my phone i cannot move the "dload" folder to internal storage so i tried to place it on my sd-card and booting up using Vol- & Power, the upgrade stops at step 2/2 saying it failed.
I'm very sorry not having a backup of the original firmware before i tried CM out (a very stupid and hasty move).
Does anyone have a solution? The phone is just a week old and i've never bricked a phone before (all my old handsets from samsung's to sony's / htc's) and never failed installing a rom or anything related.
Frankly i never suspected CM to fail flashing since everybody else is succesfull ;-/
kind regards,
Ok here's a update. I managed to install AOKP (4.3.1) so i atleast revived my phone. I'm guessing it was something with CM11.
Anyway moderators you can delete this thread, since i found the solution myself..
Thanks
bricked huawei y300
JMailuhu said:
Ok here's a update. I managed to install AOKP (4.3.1) so i atleast revived my phone. I'm guessing it was something with CM11.
Anyway moderators you can delete this thread, since i found the solution myself..
Thanks
Click to expand...
Click to collapse
can you provide instructions on how revive? mine bricked it got stuck on boot logo after succesfully rooting then i installed chainfire 3d but after that when it reboots it got stuck on boot logo plsss help me on this..
I'm really new to this, hopefully someone can help me. I rooted my phone via method 3 in the Zenfone 2 resources thread. I didn't want to update but the phone downloaded it and I thought it might be ok. The phone updated and got stuck in a bootloop. I believe the update was Z00A 2.19.40.22 ( it was like 34mb?). I read all the threads I could and came to this one. I downloaded the preroot image Z00A 2.19.22 because in my recovery at the top ,it said that was what was on it now. Did I make a mistake there, should I have downloaded an older preroot image? I followed all the directions on recovering from a bootloop ( This thread http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835. The phone booted up after the install and I was able to go through the setup. The phone suddenly froze though and I restarted. It gets past the Asus logo and then is stuck at a black screen with the green led blinking. What do I do from here? Is the phone just dead now? Is there a possibility of saving it?
More info- Before downloading the preroot I did try to factory reset from recovery. I was still stuck with bootloop. If anyone can help me I would really appreciate it a lot.
HTC Desire 616 Dual Sim Bricked error S_DL_PMT_ERR_NO_SPACE(5069)
Recently i played Real racing 3 after played and close game i got error from google play store force closed, then i reboot my device i faced bootloop so i decided to clear cache still wont boot then i try to hard reset but hard reset not complete.
i tried to reinstall stock rom using sp tool i got some error S_DL_PMT_ERR_NO_SPACE(5069). I used this stock rom many time before it success but this time it was not working n give me error ,, i tried many steps i try in another pc then i tried different rom different port different version of sp tools,,, i checked memory test also (NAND Flash: ERROR: NAND Flash was not detected!)i doubt it hardware problem in my phone not software or pc problem i just want make sure....
please help me if anyone has solution for this :crying: :crying: :crying: :crying: :crying:
mine is also same problem
plz provide solution if any
same problem here. maybe bootloader locked ?
Guys I have bricked my phone and was trying to fix it using stock rom and sp flash tool but getting an error 5069.I need a back up of desire 616 which is made by mtk droid tool which include a file name "firmware.info" and includes "md5" files to unbrick it.phone is not booting up but is detected by the computer I.e phone is entering in meta mode but not booting up no Htc logo no charging only black screen help will be highly appreciable
qsusb_dload mode
Your phone in under the above mentioned title mode. One thing you can do is to reflash the bootloader and bring it back into flashable state.
braindeductions said:
Your phone in under the above mentioned title mode. One thing you can do is to reflash the bootloader and bring it back into flashable state.
Click to expand...
Click to collapse
how i can do this? bu sp flash tools? help pliz
Hello. I have been using Note 2 GT N7100 for over 3 years now. Have rooted the phone and was running a Crdroid custom ROM on it. It did not give me any problem. Nor did I update the ROM since it was running good.
Suddenly yesterday it got stuck on the Samsung logo. Tried restarting it, but it didn't move ahead of the logo.
Today, it shows a grey and white screen. Fully blurred and can't see the Samsung logo too.
Tried going into the recovery mode, but same grey screen appears.
If I take it in download mode, it goes there. But when I try to install any stock ROM, it doesn't work. It shows failed in Odin.
Please help what can be the possible problem?
If any more information is needed, I will provide it.
Any ROM to install or custom recovery?
Please guide what to do?
Also, I am sorry if there is already some post like this. Please let me know
Thanks in Advance!
http://forum.xda-developers.com/showthread.php?t=2154890
Read this guide to fix soft brick
Sent from my SM-N910C
harsh09046 said:
http://forum.xda-developers.com/showthread.php?t=2154890
Read this guide to fix soft brick
Sent from my SM-N910C
Click to expand...
Click to collapse
Hey thanks for the quick reply. Will try and get back to you.
Need a valid link for Recovery Package
[I moved this post to this section that's more apropriate http://forum.xda-developers.com/showthread.php?t=2154890 ]
Hi guys,
Is there a link for the Recovery Package/ROM ? (the one above doens't work)
My phone is stuck on the boot logo and I need to fix it... (I'm a bit noobish..)
I've had already downloaded those files but i'm not sure that there are the correct files to use in the step 4 of this tutorial (Recovery Package/ROM).
- N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md5
- N7100XXUFND3_N7100OXAFND3_XEF.zip
Thank you a lot !
Mimo_0
Hi,
So today suddenly my phone restarted and after that it was stuck on the micromax logo, I coudnt get into recovery either. So I tried to flash the stock kitkat rom using sp tools, it did manage to flash it the first time but the phone after that wont start at all, nothing not even the charging screen.
Is it bricked for good? I tried to flash it again but if I choose firmware upgrade or download+firmware upgrade in sp tools I get the pmt info error. Is there any way to get the phone back to a working state? Any help would be much apprecited.
Note: I did look through the old post on the similar topic where the guy managed to solve the problem by using a latest version of sp tools, Im already using the latest version , no dice.
Did you get anywhere with this to unbrick the device as I have similar with a GDP XP and it wont now boot or show charge its just dead!
Any help on fixing this would be great as we cant be alone with this. ATB