OK guys let's see if you can help me out here. The problem I am having is any aosp based ROM I flash I cannot get data to load. The cm based rom , deviant rom or aicp ROM. Here's what I've tried so far, I've tried coming from zone ROM doing the typical wipes in recovery with no luck. I've tried loading from my stock back up with no luck. Then I tried flashing the M modem and still no go. Last thing I tried was backing up EFS on zone since data works on that then flashing on aosp with no data. Has anyone else came a crossed this nagging issue ? [emoji20]
Rinkle McBally said:
OK guys let's see if you can help me out here. The problem I am having is any aosp based ROM I flash I cannot get data to load. The cm based rom , deviant rom or aicp ROM. Here's what I've tried so far, I've tried coming from zone ROM doing the typical wipes in recovery with no luck. I've tried loading from my stock back up with no luck. Then I tried flashing the M modem and still no go. Last thing I tried was backing up EFS on zone since data works on that then flashing on aosp with no data. Has anyone else came a crossed this nagging issue ? [emoji20]
Click to expand...
Click to collapse
Honestly your best bet is ask in those threads as many of us are not running aosp.
BAD ASS G3
Rinkle McBally said:
OK guys let's see if you can help me out here. The problem I am having is any aosp based ROM I flash I cannot get data to load. The cm based rom , deviant rom or aicp ROM. Here's what I've tried so far, I've tried coming from zone ROM doing the typical wipes in recovery with no luck. I've tried loading from my stock back up with no luck. Then I tried flashing the M modem and still no go. Last thing I tried was backing up EFS on zone since data works on that then flashing on aosp with no data. Has anyone else came a crossed this nagging issue ? [emoji20]
Click to expand...
Click to collapse
I'm sure you found the answer by now but in case you didn't you have to change your APN to ipvp6 to get data
I don't know where it was but I saw a post saying that you have to change it to ipv6 or something. It was on the development thread.
Related
Hey guys i have a samsung i747 from rogers and i'm trying to install custom roms. I've obviously rooted it and installed CM recovery and downloaded roms and gapps. So far i've tried liquidsmooth 2.8. Avatar Rom. Cyanogen. but nothing seems to be working. Every single one of the them keeps telling me that my setup wizard had crashed and my gapps weren't working. I earlier had a Status 7 error installing cyano and avatar so i flashed d2att's 07.05.13 kernel, but that didn't seem to help. I tried running a different version of the clockworkmod recovery too. I've hardly ever "dirty" flashed. Someone help me out here i hate custom roms!!!
Wipe
Data
Cache
Delvik Cache
and Factory Reset.
Make sure you're flashing the correct GApps for android 4.2.x
Flashing a kernel has nothing to do with a status 7 error.
A status 7 error points to a outdated recovery or bootloader.
You should get ANY errors.
If you hate flashing why do it??
I honestly don't get that...
If you're here to make your phone to look "cool" you're in the wrong place.
Galaxy S3 / AoCP / V4A / Turbocharged
duoblade said:
Hey guys i have a samsung i747 from rogers and i'm trying to install custom roms. I've obviously rooted it and installed CM recovery and downloaded roms and gapps. So far i've tried liquidsmooth 2.8. Avatar Rom. Cyanogen. but nothing seems to be working. Every single one of the them keeps telling me that my setup wizard had crashed and my gapps weren't working. I earlier had a Status 7 error installing cyano and avatar so i flashed d2att's 07.05.13 kernel, but that didn't seem to help. I tried running a different version of the clockworkmod recovery too. I've hardly ever "dirty" flashed. Someone help me out here i hate custom roms!!!
Click to expand...
Click to collapse
I would get TWRP recovery.. wipe dalvik / factory reset. and re-flash your rom.. I'm on Rogers as well and the status 7 error means that your recovery / bootloader is outdated.
So start by getting the most recent TWRP. I got it from goo.
btw: if you don't like custom rom, i suggest going to the sammobile site and getting your factory firmware. Use Odin to reflash back to stock. That should solve your hiatus towards custom roms...
correction
thanks guys but idk i just tried flashing a custom rom at 4.1.2 and then went up from the there and it was fine... for the status 7 i just adjusted the coding for it so it didn`t have to check the model and this was typed up like at like 2 in the morning where i`m from i meant to say i hate stock roms LMAO:silly:
duoblade said:
thanks guys but idk i just tried flashing a custom rom at 4.1.2 and then went up from the there and it was fine... for the status 7 i just adjusted the coding for it so it didn`t have to check the model and this was typed up like at like 2 in the morning where i`m from i meant to say i hate stock roms LMAO:silly:
Click to expand...
Click to collapse
sure but its fine custom Roms can be a Pain in the A$$ thats why am running stock rooted stable, great battery life, fast like custom roms, everything is perfect give a try with stock rooted no issues or problems like custom roms
Synergy Rom 4.1.2 w/ Ziggy Kernel using ATT Galaxy S3
HAPPY ROOTIN :cyclops:
I don't know if someone already posted this, but searched and couldn't find the answer. I get stuck at boot screen all on AOSP 4.2.2 roms that I tried, but with any TW roms are fine (no problem at all). Can anyone help? I want to run AOSP rom. Thanks.
I think you may be using a touch wiz kernel
You can find some aosp kernels in the original development thread
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
jinxzn said:
I don't know if someone already posted this, but searched and couldn't find the answer. I get stuck at boot screen all on AOSP 4.2.2 roms that I tried, but with any TW roms are fine (no problem at all). Can anyone help? I want to run AOSP rom. Thanks.
Click to expand...
Click to collapse
which rom did you flash, and what did you flash?
the rom only?
the rom and GAAPS?
The rom and kernel?
you need to provide more details if you want to be helped..
Zachinater said:
I think you may be using a touch wiz kernel
You can find some aosp kernels in the original development thread
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I did flashed SOAPKernel along with aosp roms.
wase4711 said:
which rom did you flash, and what did you flash?
the rom only?
the rom and GAAPS?
The rom and kernel?
you need to provide more details if you want to be helped..
Click to expand...
Click to collapse
I flashed BeanStalk, SlimBean, CyanogenMod 10.1 official nightlies, FSC rom, and IllusionRom.
I have CWM Philz_Touch 5.07.1. Every time install a new rom, I wiped Caches + Data / Factory Reset 2x.
I flashed rom only, then flashed rom and GAPPS, those 2 didn't work, I even tried rom w/ SOAPKernel and still didn't work.
ok, you should try switching to TWRP, since most of the time people have zero issues flashing AOSP roms with TWRP.
Also, after all your wipes, flash the rom and GAAPS in the same session, and reboot..
I've done this exact procedure for years, and it works for me 99.98% of the time..
wase4711 said:
ok, you should try switching to TWRP, since most of the time people have zero issues flashing AOSP roms with TWRP.
Also, after all your wipes, flash the rom and GAAPS in the same session, and reboot..
I've done this exact procedure for years, and it works for me 99.98% of the time..
Click to expand...
Click to collapse
Switched to TWRP, and did all the wipes, install rom and GAAPS. Same thing.
Planning to flash stock rom, and redo all the root/recovery procedures all over again. Do you think I should do that?
it couldnt hurt...
some phones are just tempremental; do you have an SD card in your phone?
are you installing from the sd card or internal memory?
try installing from one or the other to see if that helps; sometimes it does...
wase4711 said:
it couldnt hurt...
some phones are just tempremental; do you have an SD card in your phone?
are you installing from the sd card or internal memory?
try installing from one or the other to see if that helps; sometimes it does...
Click to expand...
Click to collapse
I did try both, none work for me.
Thank you so much for your help thou. I'll now just install stock rom and re-root it, see how it goes.
jinxzn said:
I did try both, none work for me.
Thank you so much for your help thou. I'll now just install stock rom and re-root it, see how it goes.
Click to expand...
Click to collapse
good luck, and post back if you get it working properly
flashed stock rom and rooted and installed boot recovery, after all that, it's still not let me install any AOSP roms. Really don't why I can only flash TW roms but not AOSP roms.
Hi there, I am not new to installing Roms in any way but I accidentally installed a d2lte Liquid smooth ROM instead of what my phone is, a d2att. So when installing the above ROM I did everything what I was supposed to do (clean install, format system). However, whenever I go on any ROM (Such as Quantum or Omni) I get an error as soon as it boots up, and my signal keeps turning on and off. I wiped data, cache and dalvik twice and go to a new ROM and the problem persists. For some odd reason, Carbon ROM works but I need a different one due to battery drain. I've never experienced this problem ever and I was hoping someone could please help me out?
Have you tried re-flashing the modem?
audit13 said:
Have you tried re-flashing the modem?
Click to expand...
Click to collapse
Yes i tried that earlier but still no luck. It's weird though how there was no problem on carbon rom and yet there was a problem when i went back to the Quantum Rom. Something happened on the LiquidSmooth Rom but i don't know what. I will again try reflashing the modem though thank you.
EDIT: Re-flashing modem did not help
Is it possible to use Odin to get back to a completely stock rom? If you have a 4.3 bootloader, you can't use Odin to flash a stock ROM.
A way to get back to a stock ROM for those on the MJB bootloader has been provided by enewman17. See AT&T I747 UCUEMJB Stock Restore in the development forum.
Ok so here is the deal: I rooted and flashed cwm touch. I flashed PAC man ROM 4.4.2 nightly and after installing like 15 or so apps from the play store, my WiFi stoops working. It won't pick up any access points (I know my WiFi router is fine). So after being fed up I do a factory reset/wipe and flash PAC man ROM 4.4.2 again, this time it works fine. Now I did a full wipe and flashed carbon ROM 4.4.2 nightly and same problem: WiFi works fine and after downloading many appsit spontaneously stoops working. Not wanting to loose all my settings I just did, I reflashed the ROM and wiped the dalvik cache and cache but WiFi still doesn't work. Please help thanks!
Maybe you need a different modem than the version you've been using?
audit13 said:
Maybe you need a different modem than the version you've been using?
Click to expand...
Click to collapse
Its weird I thought that may be the case but I think the modem should work fine with my hardware... And it was working flawlessly for over a month (after I flashed PAC man ROM the second time before I switched to Carbon)
drewstopher said:
Its weird I thought that may be the case but I think the modem should work fine with my hardware... And it was working flawlessly for over a month (after I flashed PAC man ROM the second time before I switched to Carbon)
Click to expand...
Click to collapse
I have seen posts where updating the bootloader required an updated modem. I suggested updating the modem in case you updated your bootloader. All this being said, it is weird that it just stopped working. Unfortunately, I don't what else to suggest other using a stock ROM for a while to see if the problem reappears.
audit13 said:
I have seen posts where updating the bootloader required an updated modem. I suggested updating the modem in case you updated your bootloader. All this being said, it is weird that it just stopped working. Unfortunately, I don't what else to suggest other using a stock ROM for a while to see if the problem reappears.
Click to expand...
Click to collapse
Thanks I just did a full wipe and flashed seems to be working fine now..... But still weird thanks for input!
At a bit of a loss here. I have here a d2att/I747 that was working up until today on PAC-Rom, then I decided to wipe it clean and install a Touchwiz ROM. I tried S3RX, I tried a supposed Note V port, hell, I'm trying stock. None of them will finish booting. S3RX and the Note V port give me a perpetual boot logo, stock gets past the Samsung logo, plays the sound, then gets stuck at the AT&T logo. I've given each one at least an hour to do something, and they're apparently not going anywhere.
I've tried everything I know how to do; I've wiped EVERYTHING (system, data, internal storage, formatted data, the whole shebang) and nothing seems to make a difference. It's on NJ2 and I even just tried reflashing the NJ2 bootloader/modem, but that doesn't seem to have done anything either. Totally at a loss here. What could be causing this? I mean, it boots into download/recovery fine and always -starts- booting the roms, but never finishes. Could I have a corrupted partition or something?
EDIT: Oh, so I put PAC back on it and it boots again. So yeah, this seems specific to TW roms. I don't get it.
which recovery/version do you have ?
are the touchwiz roms the same android version as the pac-rom version ?
checked the touchwiz md5 to make sure has not been bad downloads ? (i know , far-fetched for them all to be bad DLs. just a thought).
"err on the side of kindness"
First off when you went from CM/AOSP based ROM to TW did you wipe everything but external storage? When going from CM/AOSP to TW & vice versa you MUST wipe internal storage. If you do this & it still fails to boot you'll need to flash the stock recovery wipe with it & install stock. Then Odin TWRP & you're good to go.
You can get the stock recovery from enewman17's NE4 thread.
Just be sure to do your research. d2att is the easiest of all d2's to hard brick thanks to At&t not releasing full firmwares.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Flashable AT&T Galaxy S3 NJ2 Stock Recovery Zip (Pulled last fall) Google Drive Links
https://drive.google.com/file/d/0B0lfMZeSyJnYT2xFbUxKVUR0RGM/view?usp=drivesdk
Chuckles5150 said:
Flashable AT&T Galaxy S3 NJ2 Stock Recovery Zip (Pulled last fall) Google Drive Links
https://drive.google.com/file/d/0B0lfMZeSyJnYT2xFbUxKVUR0RGM/view?usp=drivesdk
Click to expand...
Click to collapse
Nice!
? d2att Oct-M KrAkEn Kernel ?
Jaitsu said:
At a bit of a loss here. I have here a d2att/I747 that was working up until today on PAC-Rom, then I decided to wipe it clean and install a Touchwiz ROM. I tried S3RX, I tried a supposed Note V port, hell, I'm trying stock. None of them will finish booting. S3RX and the Note V port give me a perpetual boot logo, stock gets past the Samsung logo, plays the sound, then gets stuck at the AT&T logo. I've given each one at least an hour to do something, and they're apparently not going anywhere.
I've tried everything I know how to do; I've wiped EVERYTHING (system, data, internal storage, formatted data, the whole shebang) and nothing seems to make a difference. It's on NJ2 and I even just tried reflashing the NJ2 bootloader/modem, but that doesn't seem to have done anything either. Totally at a loss here. What could be causing this? I mean, it boots into download/recovery fine and always -starts- booting the roms, but never finishes. Could I have a corrupted partition or something?
EDIT: Oh, so I put PAC back on it and it boots again. So yeah, this seems specific to TW roms. I don't get it.
Click to expand...
Click to collapse
Flash slimkat ROM and then flash TW ROM. It will work I had same problem
Oh wow, I didn't mean to abandon this thread. I haven't been getting email notifications 'til today for some reason. Anyway, yeah, I've wiped *everything* including internal storage; I'm flashing from an external SD. Nada. I was really hoping there was some NJ2 Odin-able package I could use that'd guarantee I wasn't screwing anything up, but oh well. Anyhow, I don't have the device on hand anymore (doing this for a family member), but perhaps I'll get it back and try that slimkat idea...? To answer mrrocketdog's question, no, actually. PAC is 5.1, every TW ROM I've found is 4.4. Shouldn't matter if I'm wiping every partition I can first, though, no?
Jaitsu said:
Oh wow, I didn't mean to abandon this thread. I haven't been getting email notifications 'til today for some reason. Anyway, yeah, I've wiped *everything* including internal storage; I'm flashing from an external SD. Nada. I was really hoping there was some NJ2 Odin-able package I could use that'd guarantee I wasn't screwing anything up, but oh well. Anyhow, I don't have the device on hand anymore (doing this for a family member), but perhaps I'll get it back and try that slimkat idea...? To answer mrrocketdog's question, no, actually. PAC is 5.1, every TW ROM I've found is 4.4. Shouldn't matter if I'm wiping every partition I can first, though, no?
Click to expand...
Click to collapse
Definitely try flashing the slimkat ROM. I had the same prob as you and read someone's reply about it. It fixed the issue for the touchwiz ROMs. After flashing slimkat go back to a touhwiz ROM. Do this before messing with the phone. I have a slimkat ROM on my SD card ready to be flashed at any moment for whenever I want to go back to touchwiz haha
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app
BakedOnSomeSour said:
Definitely try flashing the slimkat ROM. I had the same prob as you and read someone's reply about it. It fixed the issue for the touchwiz ROMs. After flashing slimkat go back to a touhwiz ROM. Do this before messing with the phone. I have a slimkat ROM on my SD card ready to be flashed at any moment for whenever I want to go back to touchwiz haha
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app
Click to expand...
Click to collapse
So do I have to flash Slimkat and then dirty flash TW? Seems like that'd have to be the case, otherwise anything it adds would get wiped away, unless it messes with partitions or something... I need to read up on this ****. That's weird.