Related
Hello,
I am new to this forum (even if I have been reading it for a few months already/ I am myself a software developer) and I have some questions concerning the port of ICS to the Desire HD.
I am mainly concerned about our options to implement GPU HW acceleration. As far as I know, the Adreno 205 driver source code is not public.
- Do we need to wait a new release from Qualcomm ?
- Is there a possibility to do some reverse-engineering and possibly hack the current driver to make it work with ICS ?
- Can we use the current driver and 'modify/hack' ICS source code ?
- I suppose we can wait for an official driver for a different phone using the same GPU and 'hack' it to make it work on our device ?
Thank you for any help or suggestions.
The status is, that freexperia cm9 sneak preview hs hw acceleration enabled and the xperia has the same gpu as the dhd. ( http://forum.xda-developers.com/showpost.php?p=19777780&postcount=2013 )
But the problem is that their git tree has not been updated with the hw acceleration patches and therefor contains nothing of use to the dhd port. ( https://github.com/freexperia and http://forum.xda-developers.com/showpost.php?p=19777780&postcount=2013 ) There are currently several Posts in the freexperia thread urging them to update their git.
Also there is the following status on how and what to do about drivers: http://rootzwiki.com/topic/10447-adreno200-source-code-userspace-driver/#entry54129
Thank you very much. A lot of devices use the MSM8255 snapdragon system so I guess as soon as one of them has HW acceleration working, it should be possible to implement it on the DHD too.
I cannot wait to know more about those patches for the xperia ARC
This is hardcore MIUI v4 2.7.20 unofficial defy build ported to BRAVO. Testers needed (please) !
Unfortunely I can't test it at the moment.
But previous ports already booted up.
Currently should work:
Fi-Wi
Basic phone functionality (eg Phone Calls, SMS, MMS etc)
Problems may occure:
Camera,
Camcoder,
Panorama,
HW acceleration
and overall slow performance.
Due to build.props edited in time of porting process it may not boot up.
You can download and test it here
//waitin for replies//
I'll give it a whirl. I'll see if I can get it to boot with multiboot before I try NAND.
Excellent! Will try it later when I arrive home!
No luck with multi boot v0.5.1
Moto Bravo - Quarx's CM10 8/2
sdrawkcab3 said:
No luck with multi boot v0.5.1
Moto Bravo - Quarx's CM10 8/2
Click to expand...
Click to collapse
oh, that's a bad news.
does another MIUI builds started up with multi boot ?
I have figured out the problem and have built the new one port.
For now, before post here i've tested it.
Generaly it works, exept for camera. d.n. how to fix it.
the new build
PsyClip-R said:
I have figured out the problem and have built the new one port.
For now, before post here i've tested it.
Generaly it works, exept for camera. d.n. how to fix it.
the new build
Click to expand...
Click to collapse
Camera driver depends on the base rom. If its ICS based, then you have 2-3 different revisions of the camera driver; first working one, then the 2nd one when the frameworks were updated, and the 3rd that we use now. Only know tat from porting Fuzz ICS kangs. There's 2 camera drivers for CM7 based roms, the first one that Quarx made for us back in the day, and the current one that we use now. IF its based on Moto GB, then the camera won't work unless someone patches the Defy sources to change the 5mp soc driver to be the 3mp soc driver that we'd need. Camcorder will work if its based on a Moto GB rom, just not the picture part--thats's also why MS2 doesn't have a working camrea for the Bravo.
After some work here is my first rom for Mate.
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. DO IT AT YOUR OWN RISK.EVERYTHING WRITTEN IN THIS DOCUMENT WAS TESTED ON MY PHONE.
Stable and suitable for daily use .
Development Finished.
Working:
Audio
Wifi
Display
Led
GPS
Network
Wifi HotSpot
Bluetooth
Youtube HD.
USB
Multiuser
Pie-control
Compiled kernel using surdu_petru's P6 cyanogenmod kernel source.
Camera
Camera Recording (SD, HD720p, HD1080p)
DLNA
DolbyDigital Plus
Facelock
Non-Working :
- FM Radio
- USB Mass_Storage mode (MTP mode is usable without issues)
Known-bugs:
Camera HDR function is not working.
changelog 2014.05.11:
- Added OTA update possibilities.
- Fixed display physical size in kernel.
- Fixed Mediascanner crash
- Fixed MTPserver crash
- Fixed dpi reported by gralloc
changelog 2014.05.04:
- Fixed delay in Youtube HD play/pause.
- Added DLNA
- Added Facelock
- Added Dolby Digital Plus
changelog 2014.05.02:
- Fixed Camera
- Added CPU Governors to kernel (lazy, hotplug,wheatley)
- Kernel modifications (IO Scheduler, memory,minor config changes)
changelog 2014.04.20:
- Fixed PPTP VPN
- Fixed airplane mode switching. Now correctly registers to network after airplane mode.
- Fixed signalstrength , now it is correctly shown both in statusbar and in about phone.
changelog 2014.03.16:
- using compiled vold instead of prebuilt.
- Fixed internal sd handling. Now the main user files accessible only by the owner , second and third users files are separated correctly .
- Fixed USB OTG function. It supports pendrive with ntfs , exFat filesystems too because of the new compiled vold.
- Fixed liboverlay logcat errors.
- Increased headset volume (Thanks to acbka)
changelog 2014.03.10:
- changed to compile kernel from source at build time instead of using prebuilt kernel.
- fixed notification led color (our device does not support blue)
Download:
cm-10.1-20140511-UNOFFICIAL-hwmt1_u06.zip
Install it from permanent twrp recovery , and do not forget to do a wipe .
Use this Google Apps package : Google Apps
Sources : https://github.com/joestone/Huawei-MATE-CM10.1
Thanks to surdu_petru , CyanogenMod Team.
great work ,downloaded
works with the camera app Camera 360?
Thanks joe.stone somethig news
Inviato dal mio MT1-U06 utilizzando Tapatalk
Thanks for your hard work mate, it looks great, but I have a question for you (or anyone who used this ROM): is the audio volume higher with headphones than the stock rom? Because in stock it's very very low in maximum volume.
Shadowprince94 said:
Thanks for your hard work mate, it looks great, but I have a question for you (or anyone who used this ROM): is the audio volume higher with headphones than the stock rom? Because in stock it's very very low in maximum volume.
Click to expand...
Click to collapse
Here is a little TUT to solve your problem.
Click
greez Gadlion
Gadlion^1 said:
Here is a little TUT to solve your problem.
Click
greez Gadlion
Click to expand...
Click to collapse
Yes, but these are not really good solutions, sound is far more better and louder in custom roms.
EDIT: I made some changes in the method, and it works well.
this rom works app 360 camera and flash it???
Thanks.
ErSergi said:
this rom works app 360 camera and flash it???
Thanks.
Click to expand...
Click to collapse
Try it make a backup from your android, and try, you have nothing to lose.
Shadowprince94 said:
Try it make a backup from your android, and try, you have nothing to lose.
Click to expand...
Click to collapse
but if anyone has installed this rom you could try and get more!
Shadowprince94 said:
Thanks for your hard work mate, it looks great, but I have a question for you (or anyone who used this ROM): is the audio volume higher with headphones than the stock rom? Because in stock it's very very low in maximum volume.
Click to expand...
Click to collapse
hi , try my way http://4pda.ru/forum/index.php?s=&showtopic=475994&view=findpost&p=27064535 Russian forum
Tnx for your hard work dude keep on and god bless you
I have faith in you. Keep up the good work.
is it possible to make custom kernel compatible with cm10 so that we can try the p6 roms. It seems only touch driver is different for HAM kernel so is it possible to add touch driver to existing p6 kernels?
svvv said:
is it possible to make custom kernel compatible with cm10 so that we can try the p6 roms. It seems only touch driver is different for HAM kernel so is it possible to add touch driver to existing p6 kernels?
Click to expand...
Click to collapse
The touch driver is different , there is some differencies in camera . The audio is slightly different .
Once I will be able to compile a working touch driver loadable with insmod we will have kitkat.
joe.stone said:
The touch driver is different , there is some differencies in camera . The audio is slightly different .
Once I will be able to compile a working touch driver loadable with insmod we will have kitkat.
Click to expand...
Click to collapse
Not the KitKat one i was referring to 4.2.2 version. I installed p6 green kernel which is a CM compatible kernel in that touch is not working. is it possible to make a similar one for our HAM
svvv said:
Not the KitKat one i was referring to 4.2.2 version. I installed p6 green kernel which is a CM compatible kernel in that touch is not working. is it possible to make a similar one for our HAM
Click to expand...
Click to collapse
It is done , now based on P6 Cyanogenmod (green) kernel.
First post updated.
joe.stone said:
It is done , now based on P6 Cyanogenmod (green) kernel.
First post updated.
Click to expand...
Click to collapse
Thank you so much for your hard work joe.stone.....
google store not working
the google store isnt letting me install or update any of my apps. help please
noobK1user said:
the google store isnt letting me install or update any of my apps. help please
Click to expand...
Click to collapse
Did you install the correct Google Apps package (see first post) ?
Did you wipe / factory reset before ROM install ?
.
.
.
sediROM - or why I created a new ROM based on the good old ("ancient") ICS
.
.
.
Long story short. The following list are my requirements to a custom ROM:
I need my phone everyday so I need to resist that it is working everyday (means rock stable).
I do NOT need the latest available Android version.
I WANT to have the other components (like Kernel etc) up to date.
I REALLY REALLY need headset profiles for my bluetooth devices (Jabra, Nokia and Plantronics)
I need root access, of course.
I want to get the best battery life possible.
GB is too old for me.
Stock ROM is "too stock" for me.
I have tried all available captivate ROMs starting from ICS over Jelly Bean to KitKat.
Android < v4.x are too old for my requirements. Several features missing and well it even LOOKS old..
Android >= v4.1 are working well with the Glide but there is 1 main killer function which is completely broken since Android 4.1: Bluetooth Headset Profiles
(The Bluetooth stack was completely re-developed in 4.1)
The version which is the best compromise of beeing fresh enough - but working like a charm is Android v4.0.4 (ICS)
The problem is.. there is no ICS based ROM out there which completely fullfill ALL my requirements.
So I thought it is time for me to create my own daily-use feature-complete and rock stable ROM for the Samsung Captivate Glide / SGH - I927..
IMO the best working and best battery saving ROM for the Glide is PACMAN ROM (used pac_i927-milestone.1.RC1.4.zip)!
The problem: the earliest version of it is based on Android 4.1 which is a No-Go for me because of Bluetooth HSP.
--> I recommend the mentioned version of PACman as your daily driver if you do NOT need BT HSP. I had it running several weeks without any problems but really great battery saving.
.. well that said I couldn't fork PACman ..
So I've downgraded to all available ICS based ROM again (which was VERY painful because of broken links to the apps because of different mount point names etc).
I have tried those all again (IcePOP, Cranium, Stock, DMans ICS, etc.) but no was "as good as" LiteROM (IMHO) - which I used several weeks before.
.. so +1 for forking LiteROM ...
The problem with LiteROM is that there are still issues and no further development is done on it.
Some of the major LiteROM issues for me (those are also the reasons why I first tried newer Android versions):
It looses the paired devices after a reboot ! (but that sounded to me like it can be fixed somehow)
The lags/waits when pressing the power button to switch the display on
Battery life is not the best
not the latest Kernel
many little things in the installer like it re-installs everything when only switching to another modem etc.
Nevertheless LiteROM is still the best base I can get (because it fits to my requirements best and is rock stable) and therefore I started in May 2014 the build of sediROM which is a fork of LiteROM v0.9.
UPDATE:
sediROM is officially available and have tons of fixes and enhancements inside. Check it out in the DEV thread:
--> http://forum.xda-developers.com/showthread.php?t=2789727
Best regards
xdajog :victory:
what kernel do you use? Stock or litekernel?
Replacing kernel is very easy.
No documentation for BT sound, I dont think anybody would fix it. I've tried to find dev to find alsa HAL ( that is for voip sound fix), and no luck, while fixing alsa much more easier then fix BT sound.
Somebody tried to port cm10, it has many issue, you can find that topic in dev forum.
The idea for sediROM is to have a very well tested setup of default settings (like which kernel, etc.) but the free choice to modify it later whenever you like it.
bubor said:
what kernel do you use? Stock or litekernel?
Click to expand...
Click to collapse
Well not 1 only ... there are 4 available atm (and more when I find them and find them good enough...) (while using LiteKernel v1.2.2 as default atm - but you have the free choice)
Stock Kernel
LiteKernel v4.0 OverClocked and without UnderVoltage
LiteKernel v1.2.2 GPU not OverClocked and with UnderVoltage
LiteKernel v1.2.2 GPU OverClocked and with UnderVoltage
I tried with the ardatdat 4.x Kernels,too but without success.
Replacing kernel is very easy.
Click to expand...
Click to collapse
Well yes and nowhere such comfortable as in sediROM You can choose one of the above within the aroma installer. The same for several Modems which coming with LiteROM already (nice for testing around).
No documentation for BT sound, I dont think anybody would fix it. I've tried to find dev to find alsa HAL ( that is for voip sound fix), and no luck, while fixing alsa much more easier then fix BT sound.
Somebody tried to port cm10, it has many issue, you can find that topic in dev forum.
Click to expand...
Click to collapse
BT sound? Do you have any issues here? For me BT sound itself is working great (using it daily in my car)?! But you talked about voip - is your problem skype related?
Regards
xdajog
xdajog said:
The idea for sediROM is to have a very well tested setup of default settings (like which kernel, etc.) but the free choice to modify it later whenever you like it.
Well not 1 only ... there are 4 available atm (and more when I find them and find them good enough...) (while using LiteKernel v1.2.2 as default atm - but you have the free choice)
Stock Kernel
LiteKernel v4.0 OverClocked and without UnderVoltage
LiteKernel v1.2.2 GPU not OverClocked and with UnderVoltage
LiteKernel v1.2.2 GPU OverClocked and with UnderVoltage
I tried with the ardatdat 4.x Kernels,too but without success.
Well yes and nowhere such comfortable as in sediROM You can choose one of the above within the aroma installer. The same for several Modems which coming with LiteROM already (nice for testing around).
BT sound? Do you have any issues here? For me BT sound itself is working great (using it daily in my car)?! But you talked about voip - is your problem skype related?
Regards
xdajog
Click to expand...
Click to collapse
would you point to sediROM? I couldnt find anything with google.
I dont know what is litekernel v4, I tought the last one was 2.x or less.
Litkernel has many power save improve, but it has many bugs too,
You have said already headset doesnt work, or does it work? I'm confused.
bubor said:
would you point to sediROM? I couldnt find anything with google.
Click to expand...
Click to collapse
It will be available soon - The first barrier was the post restriction which is ok now And now I need to find a place for uploading the 430 MB and then I will post it in the dev area..
I dont know what is litekernel v4, I tought the last one was 2.x or less.
Litkernel has many power save improve, but it has many bugs too,
Click to expand...
Click to collapse
--> http://goo.im/devs/thegreatergood/LiteKernel/ICS
You have said already headset doesnt work, or does it work? I'm confused.
Click to expand...
Click to collapse
Oh no I said Bluetooth is generally working fine in Android v4.0 and therefore in sediROM / LiteROM but not in other ROMs which are based on Android 4.1 or higher
--> The only thing which are not perfect in v4.0 (or especially in LiteROM) is that Bluetooth Pairing are lost after rebooting.
--> ... and that is fixed in sediROM
Smashing! :laugh: I have been roaming around for something like this! Bloody awesome! Let me know when you have the download link ready! I will be glad to test it, and if it is stable as stock ICS I will definitely keep it as my DD! Thanks in advance for this! If you say it is indeed a fork for LiteROM with no bugs it will be the s#$)!!! And of course a keeper. Same as you, I´ve tried almost every ROM available for our cappy, but never totally satisfied with none. :fingers-crossed: Hoping this ROM is what I have been looking for. What exactly did you fix, aside from the pairing issues? Any luck with the automatic toggles, Force close issues, deep sleep power button.... :fingers-crossed::fingers-crossed::fingers-crossed:
Man gimme more details! Freakin excited here :silly: jue jue jue jue
lasuazo said:
Smashing! :laugh: I have been roaming around for something like this! Bloody awesome! Let me know when you have the download link ready! I will be glad to test it, and if it is stable as stock ICS I will definitely keep it as my DD! Thanks in advance for this! If you say it is indeed a fork for LiteROM with no bugs it will be the s#$)!!! And of course a keeper. Same as you, I´ve tried almost every ROM available for our cappy, but never totally satisfied with none. :fingers-crossed: Hoping this ROM is what I have been looking for. What exactly did you fix, aside from the pairing issues? Any luck with the automatic toggles, Force close issues, deep sleep power button.... :fingers-crossed::fingers-crossed::fingers-crossed:
Man gimme more details! Freakin excited here :silly: jue jue jue jue
Click to expand...
Click to collapse
whooa keep calm my friend
as said I try to solve all the problems I saw in my case and that's what I fixed. If that fixes all yours.. - I don't know
The thing which sounds interesting to me is that you talk about automatic toggles and force closes.
I never seen automatic toggles and force closes but it may be because I use another Kernel. Well we will see when you have tried it .
I cannot promise it is bug free (in this early state of this ROM there is at least 1 known bug - to be honest) but I may can help to fix things..
Rest and details coming soon... :angel:
I'd definitely be interested in testing your ROM. Your idea is more or less what I wanted for my i927. Hope to be able to try it soon.
xdajog quick question mate, which Kernel have you been using so far? Stock Kernel, Litekernel (version)?
I remember lite kernel causes battery drain in ics
Sent from my SGH-I927 using XDA Premium 4 mobile app
Androide3 said:
I remember lite kernel causes battery drain in ics
Sent from my SGH-I927 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Exactly, that is why I would like to know which kernel would be recommended Never tried liteRoM with stock kernel
Will be fun to test out. I mostly stick to CM11 but I like to try out others often.
lasuazo said:
xdajog quick question mate, which Kernel have you been using so far? Stock Kernel, Litekernel (version)?
Click to expand...
Click to collapse
Androide3 said:
I remember lite kernel causes battery drain in ics
Click to expand...
Click to collapse
Well that point is not totally fixed yet. I'm currently using Litekernel 1.2.2 in the not-overclocked version but also played around with the others - even Stock of course. That said I cannot say that I've found a perfect kernel (grakernel may the one but it is for JB and higher only ) and still testing others.
So the short answer is that there are not such differences between them when it comes to battery drain (see my post in the dev because that's one of the open points yet)
... and only to ensure that we have all the same understanding: sediROM is my experiment to go to / to get / to become the perfect stable but actual ROM for the Glide. It is "on it's way" you now
For becoming that I need feedback of course and I believe there will be many things I may not seen/use like you do so don't expect something "perfect"
xdajog said:
It will be available soon - The first barrier was the post restriction which is ok now And now I need to find a place for uploading the 430 MB and then I will post it in the dev area..
--> http://goo.im/devs/thegreatergood/LiteKernel/ICS
Click to expand...
Click to collapse
You are really miss the point.
4.0 means android version not kernel version.
The litekernel package includes a boot image, that boot.img include kernel,ramdisk.
Ramdisk is the root on your android. Litekernel has some ramdisk modification too ( https://github.com/thegreatergood/LiteKernel---Glide/tree/master/Build4.2/ramdisk/sbin/ext https://github.com/thegreatergood/L...ster/Build4.2/ramdisk/sbin/LiteKernel_Manager )
Grakernel should work with any rom, it doesnt change ramdisk, just replace kernel and install modules to /system/lib/modules. I think modules in you rom is in /lib/modules on ramdisk, so you need to change my install script to modify ramdisk.
bubor said:
4.0 means android version not kernel version.
Click to expand...
Click to collapse
oh I'm quite new in that and a little disappointed now :crying: Well kernel v1.x is not for Android 1.x so .. in a perfect world the version naming would be everytime the same.. so everyone would know what it means... So I it may be the same as one of the 1.x LiteKernels available.
Grakernel should work with any rom, it doesnt change ramdisk, just replace kernel and install modules to /system/lib/modules. I think modules in you rom is in /lib/modules on ramdisk, so you need to change my install script to modify ramdisk.
Click to expand...
Click to collapse
Hm so you say replacing the kernel, adding the modules and it should work?
I've tried that already but without success (booting but display keeps black with some green pixels ..)
As I can see in your link the Litekernel mods are note relevant for functioning or am I wrong? They seem to do some power saving stuff nothing else?
xdajog said:
oh I'm quite new in that and a little disappointed now :crying: Well kernel v1.x is not for Android 1.x so .. in a perfect world the version naming would be everytime the same.. so everyone would know what it means... So I it may be the same as one of the 1.x LiteKernels available.
Hm so you say replacing the kernel, adding the modules and it should work?
I've tried that already but without success (booting but display keeps black with some green pixels ..)
As I can see in your link the Litekernel mods are note relevant for functioning or am I wrong? They seem to do some power saving stuff nothing else?
Click to expand...
Click to collapse
Litekernel has 2 version string, one from the build version and one from android version. Litekernel has some power save codes, it cases that deep sleep issue IMHO.
Did you download kernel from i9103 forum or mine from http://dualhoki.vim.hu/bubor/dev/grakernel/ ? Sound like you have i9103 version.
bubor said:
Did you download kernel from i9103 forum or mine from http://dualhoki.vim.hu/bubor/dev/grakernel/ ? Sound like you have i9103 version.
Click to expand...
Click to collapse
it was yours (1.4.3) - but I will re-test it again to be sure..
I want to give a try
i am very very very interrested in your ROM!
The BT-Headset function is very important for me, because for my car hifi handsfree bluetooth mode.
Battery Life
Since we are on the topic of battery life... does KitKat have the best battery life, or should I be using something else?
hi all
we are cooking 1 kernel for all msm8226 devices for all custom roms
Source
https://github.com/sonyxperiadev/kernel/
feel free to fork, joyn and push back
br
J
jerpelea said:
hi all
we are cooking 1 kernel for all msm8226 devices for all custom roms
Source
https://github.com/sonyxperiadev/kernel/tree/aosp/LNX.LA.3.5.1-03010-8x74.0
feel free to fork, joyn and push back
br
J
Click to expand...
Click to collapse
will this work on dual and work on aosp ?
Ashwin Prabhunerurkar said:
will this work on dual and work on aosp ?
Click to expand...
Click to collapse
this is for aosp
br
J
new touch driver was ported to this kernel
overclocked?
Andrey Piekas said:
overclocked?
Click to expand...
Click to collapse
this kernel is a base for other projects and will be focused on code cleanup and stability
overclock on a mobile device with limited battery is just a waste of energy
br
J
jerpelea said:
this kernel is a base for other projects and will be focused on code cleanup and stability
overclock on a mobile device with limited battery is just a waste of energy
br
J
Click to expand...
Click to collapse
I get that... Now our phones can handle stuff... But its just a matter of time before they can't... And since we can't afford to buy new devices ever so often, and since it's good to have choice, I kindly request to please allow overclocking and undervolting. Anyways its great to finally see support from the different devs. Thanks
the_prodigal_coder said:
I get that... Now our phones can handle stuff... But its just a matter of time before they can't... And since we can't afford to buy new devices ever so often, and since it's good to have choice, I kindly request to please allow overclocking and undervolting. Anyways its great to finally see support from the different devs. Thanks
Click to expand...
Click to collapse
instead of adding ov, uc we will implement it in a clean way
other devs can fork and "optimize" the kernel
br
J
kernel status
- kernel has been cleaned
- kernel has been rebased to 5.2.2 branch
- fixed and cleaned leds
Eagle
- keys have been fixed
Flamingo
- keys have been fixed
- battery charging is fixed
- lcd backlights bug is fixed
Tianchi
- keys have been fixed
- battery charging is fixed
Seagull
- keys have been fixed
- battery charging is fixed
- lcd is finaly working
Known Bugs
Eagle
- backlight does not work
Flamingo
- none
Tianchi
- none
Seagull
- panel init on first boot
- audio amp has to be ported
jerpelea said:
kernel status
- kernel has been cleaned
- kernel has been rebased to 5.2.2 branch
- fixed and cleaned leds
Eagle
- keys have been fixed
Flamingo
- keys have been fixed
- battery charging is fixed
- lcd backlights bug is fixed
Tianchi
- keys have been fixed
- battery charging is fixed
Seagull
- keys have been fixed
- battery charging is fixed
- lcd is finaly working
Known Bugs
Eagle
- backlight does not work
Flamingo
- none
Tianchi
- none
Seagull
- panel init on first boot
- audio amp has to be ported
Click to expand...
Click to collapse
Is available for download?
Andrey Piekas said:
Is available for download?
Click to expand...
Click to collapse
link is in first post
Very happy to see the kernel for our phne but what are the features of this kernel
jerpelea said:
instead of adding ov, uc we will implement it in a clean way
other devs can fork and "optimize" the kernel
br
J
Click to expand...
Click to collapse
Oh, and one important thing, does it work on MSM8228 devices aswell ? or just 8226? 8228 is the dual sim model in this forum's context
hi All
Busy weeks ....months ...
Progress so far
- unified 3.4 kernel is stable for daily use and community tweaking
As some of you have already seen we have started work on comunity 3.10 unified kernel
This kernel is not finished and not stable but is an invitation for developers to joyn, test and improve a kernel built "by community for community"
Br
J
build guide has been updated for easy reading
http://developer.sonymobile.com/kno...evices/how-to-build-and-flash-a-linux-kernel/
br
J
jerpelea said:
build guide has been updated for easy reading
http://developer.sonymobile.com/kno...evices/how-to-build-and-flash-a-linux-kernel/
br
J
Click to expand...
Click to collapse
if i follow this tutorial, can i build for t2 dual?
miki89 said:
if i follow this tutorial, can i build for t2 dual?
Click to expand...
Click to collapse
yes if you add t2 dual configs
br
J
hi all
kernel 3.10 is progressing nice
it can soon be used on SONY AOSP Project
master branch on devices uses 3.10 kernel
l-mr0 branch uses 3.4 kernel
br
J
hi all
3.10 is progressing nice
at this point can be used for L MR1 and shows good battery savings
more enhancements and bugfixes will come soon
br
J
hi all
3.10 kernel is usable as daily kernel
any bugreports and fixes are welcomed
br
J