Title says it all, here's a link to my SUPER TEDIOUS AND INCREDIBLY INEFFICIENTLY made live wallpaper for facer. It's the kefka battle, every character (Sabin, Cyan, Terra, Edgar and of course, Kefka) has an attack animation. Animated frames are tied to the rotational position of the second hand which after some experimenting I found only counts in increments of 6. Therefore here, for you all, a one minute, looping, landmark retro battle scene that takes place on your watch everytime you turn your wrist.
THIS DOES TAKE A WHILE TO BE PUSHED TO THE WATCH FROM THE APP BE PATIENT.
Seriously, I restarted my watch before I attempted to push and it took about 3-5 minutes to finally sync, but I'm more than proud to announce it runs perfectly with no lag or errors on screen.
Time/Date/Battery percentage are in a harmless green text along the bottom.
I hope you enjoy this watchface, I know I'm going to. I wouldn't mind frame by framing more detailed animations for this but unless someone can show me a way to increase the animations FPS from 1 per second this is the absolute best I can do.
IMGUR: http://imgur.com/qJFfpLg,u8azhlf#0
A mere 2 of the 60 images just to show that it is in fact, animated. Don't ignore the Second Image link above the photo linked above.
Without further adieu...
https://www.mediafire.com/?1vq5lw4bmoif72q
Metroid something soon to follow.
I would love to know how to get this to work which app do I use?
Ulukita said:
I would love to know how to get this to work which app do I use?
Click to expand...
Click to collapse
You can push this to your watch with facer! Just be patient, it may take a while to show on the watch but the results are to expectation.
Does this show as square on an LG G Watch?
Related
Updated with NCAA Football support
This is for WM6.1 standard, smarthphones ONLY using sliding panel homescreen.
Thanks to ScottyMoMo for this pocket sportscenter app from this thread here: http://discussion.treocentral.com/showthread.php?t=161402
This is a homescreen plugin for ScottyMoMo's Pocket SportsCenter for smartphone. This plugin will display any teams that you select in PSC. Teams only as of now, may add more support later. PSC allows you to select teams from MLB, NFL, NBA, or NHL. Once you select the teams in PSC, select the option to exit and save teams to panel.
NCAA football Top 25 teams are now available for scores and updates on page 2 of the sports panel. Since my feed only gives top 25 scores, and most teams I follow are in the top 25, I went ahead with a top 25 scoreboard instead of including team support. When activated it will provide the top 25 teams scores and start times on the text loop in clock panel. Scheduling will not work for auto updates. It will have to manually be started and stopped since there are so many different game times.
The first page of panel is for PSC setup and options. The second is NCAA football. The rest of the pages are for your teams( I allowed for up to 20 teams to be added). From the teams' pages, The ActionURL will do a manual update for that team. The softkey URL will open auto update options which are as follows:
1) stop auto updates
2) 5 minute intervals
3) 10 minute intervals
4) 15 minute intervals
5) Custom intervals
6) Setup timezone( for auto updates scheduling)
After selecting an interval it will save it and run an update. Only one team at a time on updates, both manual and auto. You can go to another page to manual update another team while one is on auto, but only 1 auto update can be run at a time.
I added an automatic scheduling for the auto updates also. When you click on auto update, it will check to see if game is already started or if it should wait till game time. If it finds a game time, it will then set itself to wait and start the autoupdates at that time. Once it gets the final score, auto update will stop automatically. Auto updates should not be started until game day and should work when set the day of game, but not if you try to set before that day.
It now has clock panel text loop support for the auto updates. So if auto is running, it will display game info for that team in operator name text area along with team icon. When auto stops, then text reverts back to network id or weather along with icon that was there before auto started.
TO INSTALL THIS:
1) Install either with the cab . Install to Main memory for now, I'll have to make a few adjustments for the storage card(should be ready in a few days).
2) After installation, go to the start menu and find Pocket SportsCenter. Click on this and setup your teams.
3) After selecting your teams, click on Exit and Save Teams to panel.
4) Now, if all has gone correctly, your homescreen will refresh and the new Sports panel will be visible with your teams, ready for use.
For anyone that needs to replace/fix their team icon folders, all league zip files are in post #135.
To Uninstall: Use Remove Programs and uninstall this cab. Then you will need to reboot or refresh your homescreen to remove the Sports panel.
If there's enough interest in this, I will take the time to make this real nice. Lets see a "show of hands" or keyboards... or whatever..lol
here's a hand and keyboard thumbs up!
would be huge
Would love this. I have Pocketsportscenter but not like this!
I'm Swiss.
I would absolutely love this on my dash, if your gonna do it then i can't wait because your chome weather is awesome so I'm sure this will be as well!!!
Work it baby
OrganicM said:
If there's enough interest in this, I will take the time to make this real nice. Lets see a "show of hands" or keyboards... or whatever..lol
Click to expand...
Click to collapse
Damn it, I'm in.
OrganicM said:
If there's enough interest in this, I will take the time to make this real nice. Lets see a "show of hands" or keyboards... or whatever..lol
Click to expand...
Click to collapse
Can i raise a few sets of hands?
i got my hand raised
definatly go for it. that way when basketball season comes around again ill be ready
Awesome! I wanted you to take it Org, but I knew you were busy. Thats why I posted, hoping you couldn't resist. Get your new house taken care of, and then show us the magic.
I'll work on it slowly at night... So it might take a few days. Besides, it looks like most of the work is already done, so I just have to make it pretty and useful
OrganicM said:
I'll work on it slowly at night... So it might take a few days. Besides, it looks like most of the work is already done, so I just have to make it pretty and useful
Click to expand...
Click to collapse
Oh yah for sure I am waiting for this to be a nice program... it should be exciting...
here's a hand and can't wait
My hand is way up!!!
Showaco, Even though I'm not into sports - I would like to thank you for spending the time to make this for our community. Keep up the good work!
Thanks for this, good idea and good program...
This hands up here!
O! You could make this real nice! Im interested!
Microsoft Innovation Centre in Singapore has their hands on a developer LG Panther running WP7. They have a lot of pictures but better then that they have a video of the phone first booting and the setup you go through when you do so. I have to admit that it looks likes WP7 is running very smoothly! Hit the link and scroll down to see for yourself!
http://innovativesingapore.com/2010/05/windows-phone-7-spotted/
Silverlight required!
Not seeing the video anywhere in your link
Yeah It looks like they took the video off the page.
heres a youtube link of it
http://www.youtube.com/watch?v=_JqAnhYVeZs
really cool video guys...
man .. too much on scrolling on time-zone
can these guys innovate an easy way to pick a time zone?? can they just provide a map and and an initial spot where we can select the time-zone also once the spot has been tapped, it will zoom out to a more specific time zone in the current GMT??
how's that for change?
loving the flick and scroll too much is sometimes we forget to think of better way.
I would hope that you could just start typing the name of the city. A side scroll bar would be nice too for those really long lists. But I guess that's too Windows Mobile looking.
How about set the time zone by GPS automatically?
Greetings to Developers & Moderators.
I am using Raphael 300( Windows 6.5.x ) and I prefer using the windows Home Screen rather than using Manila.
I humbly ask you all is it possible to make the clock ( small round analogue ) alive and work equally along with the digital one on the home screen.. I have attached a picture along with this post to make the concept clear..
Thanks and Regards to every Moderators and Developers
Hi bonnyinqingdao
The little analog clock is only an image, search for "Titanium skins" to find something close, not what you want exactly. Good luck!
Feasibly, I could make a program that every minute it updates and creates a new clock image based on the Time, however I am not sure how the homescreen works exactly (in terms of refreshing). Refreshing the homescreen every minute would be both a pain and inconvenient.
If someone knows how to update the image every minute without inconvenience, I would be happy to make the image-maker
Cyclonezephyrxz7
60 images X 12 = 720 it's a lot of work !!! Refreshing Titanium takes 3 to 6 seconds, every minutes it 'll happen, the whole device will be devoted to doing only this thing
tito12 said:
Cyclonezephyrxz7
60 images X 12 = 720 it's a lot of work !!! Refreshing Titanium takes 3 to 6 seconds, every minutes it 'll happen, the whole device will be devoted to doing only this thing
Click to expand...
Click to collapse
I wouldn't save the images to the phone. Not all of them atleast.
The program would have a base-image to work with, and it will load it, then draw a Line on it with Graphics.DrawLine() for the minutes and one for the Hour. I already know the formula for degrees between hands for every minute (it was an Extra Credit Final Project in my Geometry class two years ago )
However, if Titanium doesn't update that often, then it isn't all too worth it...It would cost more resources than it is worth That, or someone can just make a new CCLock Panel (I don't know C++ well enough, so I can't do that)...
Right, I didn't think about changing the arms only
There's already an analog clock plugin somewhere....
So, I reallyy like the minimal look the the Digital watch face by Motorola (available in their Connect app). I did wish it would have a little bit more info on it so I made this clone of the watch face. Now, I am in no way a watch face designer and may of not even made this correctly, but it works on my Moto 360. I am not really sure how to make the time show either 24 hour or 12 hour correctly and I use 24 hour, so someone with the knowledge, if you want, can fix that part. hopefully it works....
I am brand-new to this, as I just got a Moto 360 (1st gen.) for Christmas. I was trying to make a watch face from a design. I had isolated the parts of the design i wanted for the hour hand and minute hand. However, every time i try to create the watchface in Watchmaker, the hour/minute hands have a white background. In other words, i cannot figure out how to create the design for the hands with a transparent background.
The main restriction i have is that i am only working on this through my work laptop, and i don't really have access to install new programs (i.e., paint.net, etc.). I have MS Paint, or any other program that is normally pre-installed.
Can anyone give any advice? OR... i could easily email the design parts to someone and have them build it for me. But i would like to know how to do this as well.
Thanks to all! Again, sorry for such a newb question.