Develop Bugs

HTC Desire HD problems

Ace XA SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Im stuck in hboot and no recovery options work
This has never been rooted and is branded three mobile but unlocked,I tried the PD file to sd but I am getting CID error,ADB does
not show any devices listed to get the CID to create a gold card.
Any advice greatly appreciated please
thanks

tatty-scones said:
Ace XA SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Im stuck in hboot and no recovery options work
This has never been rooted and is branded three mobile but unlocked,I tried the PD file to sd but I am getting CID error,ADB does
not show any devices listed to get the CID to create a gold card.
Any advice greatly appreciated please
thanks
Click to expand...
Click to collapse
Hey, how did you get to that state? ADB won't work in hboot, but you can use fastboot commands. Plug the phone in hboot and make sure that it reads fastboot usb in red in the phone (if it reads HBOOT USB PLUG, just press power). Then, open a cmd and type:
Code:
fastboot devices
fastboot getvar all
The first command will show your serial number if the device is detected, the second will prompt CIDnum, serial, IMEI and some other stuff. Paste the getvar all outcome in here and i will help you to find a RUU for your device. PLEASE DELETE THE IMEI from the list, it is not necessary and it might be dangerous.

glevitan said:
Hey, how did you get to that state? ADB won't work in hboot, but you can use fastboot commands. Plug the phone in hboot and make sure that it reads fastboot usb in red in the phone (if it reads HBOOT USB PLUG, just press power). Then, open a cmd and type:
Code:
fastboot devices
fastboot getvar all
The first command will show your serial number if the device is detected, the second will prompt CIDnum, serial, IMEI and some other stuff. Paste the getvar all outcome in here and i will help you to find a RUU for your device. PLEASE DELETE THE IMEI from the list, it is not necessary and it might be dangerous.
Click to expand...
Click to collapse
Hi,I didnt do anything,I just had not used the phone for a weeks and the battery was empty.
heres the results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0027
(bootloader) version-baseband: 26.14.04.28_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main:
(bootloader) serialno: 123456789012
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD98*****
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3623mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 743ca94a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
Thanks a lot for that
cheers

tatty-scones said:
Hi,I didnt do anything,I just had not used the phone for a weeks and the battery was empty.
heres the results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0027
(bootloader) version-baseband: 26.14.04.28_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main:
(bootloader) serialno: 123456789012
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD98*****
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3623mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 743ca94a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
Thanks a lot for that
cheers
Click to expand...
Click to collapse
Sorry, I would need the main version as well to see what exact RUU you were running...

glevitan said:
Sorry, I would need the main version as well to see what exact RUU you were running...
Click to expand...
Click to collapse
Is there another way to find the main version?
cheers

tatty-scones said:
Is there another way to find the main version?
cheers
Click to expand...
Click to collapse
in the getvar all...info-main. It should be something like 3.13.284.5....

glevitan said:
in the getvar all...info-main. It should be something like 3.13.284.5....
Click to expand...
Click to collapse
I tried but it just shows up as blank
any other suggestions please?
thanks

tatty-scones said:
I tried but it just shows up as blank
any other suggestions please?
thanks
Click to expand...
Click to collapse
That Is weird....never saw tat before. Let me do dome research

tatty-scones said:
I tried but it just shows up as blank
any other suggestions please?
thanks
Click to expand...
Click to collapse
Hey, I haven't found anything like your issue. But we can try to create a goldcard and flash an unbranded RUU and see what happens. I can lend you a hand over teamviewer if it is alright with you. This weekend will be kinda busy, but from sunday on we can arrange...

I have one too with the exact problem...any news ?
10x !

How to restore my htc one x back to stock?

Hi, can someone help me on how to unroot/restore my htc one x back to stock?
im currently using a custom rom which is ViperX 4.0.3
plus i dont have my backup stock rom file.
please help
thanks in advance!

thirdempire said:
Hi, can someone help me on how to unroot/restore my htc one x back to stock?
im currently using a custom rom which is ViperX 4.0.3
plus i dont have my backup stock rom file.
please help
thanks in advance!
Click to expand...
Click to collapse
post the result from command fastboot getvar version-main

Thant said:
post the result from command fastboot getvar version-main
Click to expand...
Click to collapse
how to do that? sorry this phone was given to me by my cousin and i dont know how to start.

thirdempire said:
how to do that? sorry this phone was given to me by my cousin and i dont know how to start.
Click to expand...
Click to collapse
then better read in general section some guide, you need fastboot and adb on your computer. You don't know how to go in bootloader and you want to flash rom. Please be more specific. Not like I am using ViperX say I take phone with installed ViperX. It is not so ease to restore phone and in case you don't know how to use fastboot!
And now my answare download fastboot and adb go in bootloader and run the command. To go in bootloader tutn off your phone then press volume down + power button until you are in bootloader.

i got it now sir
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3809mV
(bootloader) devpower: 49
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!

thirdempire said:
i got it now sir
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3809mV
(bootloader) devpower: 49
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Now first download this RUU , charge the phone to full relock your bootloader and run the RUU as administrator.
to relock bootloader use the command fastboot oem lock if your bootloader say Unlocked you must run the command if say RELOCK then you are ready to run the RUU
And if you think I didn't see you post me the result from other command you are wrong

thank you sir, ill try it now.

Thant said:
Now first download this RUU , charge the phone to full relock your bootloader and run the RUU as administrator.
to relock bootloader use the command fastboot oem lock if your bootloader say Unlocked you must run the command if say RELOCK then you are ready to run the RUU
And if you think I didn't see you post me the result from other command you are wrong
Click to expand...
Click to collapse
Do you have a O2__001 RUU ?

GlennBrownie said:
Do you have a O2__001 RUU ?
Click to expand...
Click to collapse
NO I think read some your post you are with 1.72 hboot and there no RUU for this hboot you must found newr nandroid backup and rrestore it or install custom rom

Thant said:
NO I think read some your post you are with 1.72 hboot and there no RUU for this hboot you must found newr nandroid backup and rrestore it or install custom rom
Click to expand...
Click to collapse
I found one, does anyone need a copy?

GlennBrownie said:
I found one, does anyone need a copy?
Click to expand...
Click to collapse
Found RUU or backup for backup I dont need for RUU will be intersting to see this one

Help to install official rom 5.0.2

Hello everyone,
i am having a problem with my M8. I have installed CyanogenMod 12 to my phone and i want to go back to official 5.0.2 ..
The problem is that I have no wifi signal with many roms i tried to install. So i want to go back to official.
Thanx in advance ..

You have old hboot and firmware version.
All the newer Sense based ROM require hboot no less than 3.19.0000
What's your fastboot getvar all - post here minus serial no. & imei no.
This will help to go back to official and maybe lollipop already available for your device region.
and it's 5.0.1 not 5.0.2

How can i find fastboot getvar all

alexis333 said:
How can i find fastboot getvar all
Click to expand...
Click to collapse
In ADB/fastboot issue the command fastboot getvar all

xunholyx said:
In ADB/fastboot issue the command fastboot getvar all
Click to expand...
Click to collapse
More info ?

If you don't know what fastboot is how did you unlock your phone in the first place?

EddyOS said:
If you don't know what fastboot is how did you unlock your phone in the first place?
Click to expand...
Click to collapse
I am on fastboot and i type fastboot getvar all at cmd but says waiting for device

Sounds like your drivers aren't installed, so look into that first (you need HTC Sync on your PC)

EddyOS said:
Sounds like your drivers aren't installed, so look into that first (you need HTC Sync on your PC)
Click to expand...
Click to collapse
Ok i ll be back soon ..

alexis333 said:
Ok i ll be back soon ..
Click to expand...
Click to collapse
Installed Htc Sync and Sync Manager but it says no device found .
Lol

alexis333 said:
Installed Htc Sync and Sync Manager but it says no device found .
Lol
Click to expand...
Click to collapse
Some help here ?
Installed HTC driver and Htc Sync my still says no device found ..
Win 8.1

Your drivers are still not installed. Go into Device Manager and get them installed and it'll work

You also need to "allow USB debugging" in developers options on the phone. You can check whether your phone is actually connected by typing "fastboot devices".

No you don't as ADB is for when Android is running, fastboot is when in the bootloader

ok i managed to connect it to HTC SYNC MANAGER.
My phone is S-ON and i have installed Android Revolution HD ROM but my wifi is not working.
C:\WINDOWS\system32>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.2133156.UA15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 098a72e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.080s

@alexis333
Delete your serial number and IMEI from your last post for your own safety
---------- Post added at 05:00 PM ---------- Previous post was at 04:53 PM ----------
alexis333 said:
ok i managed to connect it to HTC SYNC MANAGER.
My phone is S-ON and i have installed Android Revolution HD ROM but my wifi is not working.
C:\WINDOWS\system32>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.2133156.UA15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 098a72e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.080s
Click to expand...
Click to collapse
Your wifi isn't working because you have outdated firmware. 3.16 hboot = 4.4.2 firmware. You need to update it.

xunholyx said:
@alexis333
Delete your serial number and IMEI from your last post for your own safety
---------- Post added at 05:00 PM ---------- Previous post was at 04:53 PM ----------
Your wifi isn't working because you have outdated firmware. 3.16 hboot = 4.4.2 firmware. You need to update it.
Click to expand...
Click to collapse
Ok. i deleted them.
Is there any tutorial for the firmware ?. How can i do that ?
I am S - ON ..

alexis333 said:
Ok. i deleted them.
Is there any tutorial for the firmware ?. How can i do that ?
I am S - ON ..
Click to expand...
Click to collapse
No need for a tutorial., HTC__203 is your CID. That's WWE (France). Download this RUU onto your PC, and run it. It's an .exe file, so all you have to do is download it, double click it, and follow the prompts (just like installing software on your PC).
Put your phone into fastboot before you run the download, as sometimes there are problems flashing when you haven't already booted into it (from what I've heard).
Also, back up anything that is important to you, as this will wipe your phone.

error 155 when it started to updating . i was in fastboot ..

alexis333 said:
error 155 when it started to updating . i was in fastboot ..
Click to expand...
Click to collapse
OK. I found the solution. I Had to lock the bootloader before updating the firmware.
No i have the latest firmware.
Which Recovery do you recommend me to install ? I installed TWRP ..
Is that ok or to install another one ? And which rom to install ?
I hearing you recommendations ..

[Q] Upgrade HBOOT

Hi
I have the International HOX. It is running HBoot 1.31.
Do i need to upgrade HBoot to enable flashing new custom ROMS, such as Lollipop? I have lots of trouble installing new ROMs 4.4 or later
If so how do I update the HBoot? I have see tutorials for installing custom ROMs and they all seem to show HBoot of 1.36 of later.
Thanks in advance
Geoff

Upgrate hboot.
1. Start phone in fastboot Usb mode and execute in cmd command line >
Code:
fastboot oem lock
2. Then reboot
Code:
fastboot oem rebootRUU
3. Flash the update
Code:
fastboot flash zip firmware.zip
. Where firmware.zip is a higher hboot
4.
Code:
fastboot flash unlocktoken Unlock_code.bin
. where unlock_code bin is from unlocking procedure.

Thanks but now i have more questions
1. Do i need to upgrade HBOOT to something later than 1.31 to install Lollipop ROMs? That is my original question
2. If i do need to upgrade, the there do i get the files you mentioned in your post? (eg firmware.zip)
Thanks

grwalker said:
Thanks but now i have more questions
1. Do i need to upgrade HBOOT to something later than 1.31 to install Lollipop ROMs? That is my original question
2. If i do need to upgrade, the there do i get the files you mentioned in your post? (eg firmware.zip)
Thanks
Click to expand...
Click to collapse
OK this gone to finish bad. First of all yes you need higher hboot at last 1.39. Second give the result from command fastboot getvar version-main

Thanks for that.
Do you know where i can get HBOOT 1.39 (or later) for the HTC One X please?

grwalker said:
Thanks for that.
Do you know where i can get HBOOT 1.39 (or later) for the HTC One X please?
Click to expand...
Click to collapse
give me the result from command fastboot getvar version-main

Thant
fastboot getvar version-main gave the result as follows
version-main 3.14.401.619
Thanks

grwalker said:
Thant
fastboot getvar version-main gave the result as follows
version-main 3.14.401.619
Thanks
Click to expand...
Click to collapse
Strange HTC never released 3.14.401.619 now I want to give me the result from command fastboot getvar all and delete your S/N and IMEI from the info. Post the result here

Hi
Here is the results of fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.31.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.619
(bootloader) serialno: ?????????????????????
(bootloader) imei: ???????????????????
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3860mV
(bootloader) devpower: 61
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
Many Thanks

grwalker said:
Hi
Here is the results of fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.31.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.619
(bootloader) serialno: ?????????????????????
(bootloader) imei: ???????????????????
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3860mV
(bootloader) devpower: 61
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
Many Thanks
Click to expand...
Click to collapse
bad really bad read post №86 but you must to change the android-info.txt and return to stock I sugest you to download RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed.exe and edit android-info.txt to 3.14.401.620
The other way is to flash latest hboot directly with fastboot and then install lolipop with the procedure from post #2 I think this will be the ease way. Attached file must be your firmware.zip

Thanks for the info
Why is it "bad really bad"?

grwalker said:
Thanks for the info
Why is it "bad really bad"?
Click to expand...
Click to collapse
because HTC never release 3.14.401.619 base it is some kind of mistake!

My CID says T-MOB005 and I am currently on HBOOT 1.39. I would like to update the HBOOT to the latest available and after a bit of searching I am not sure if I can with the CID T-MOB005?
Code:
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.163R.30
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.16.110.4
(bootloader) serialno: HTCxxxxxxxxxx
(bootloader) imei: 3591xxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: T-MOB005
(bootloader) battery-status: good
(bootloader) battery-voltage: 4158mV
(bootloader) devpower: 100
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
I am currently running CM11 with CWM recovery but am about to make the leap to CM 12.1...
Cheers
Andy

Hi
To upgrade HBOOIT i ran did the following
fastboot oem lock
fastboot oem rebootRUU
fastboot flash zip firmware.zip.
I used the firmware zip you posted in post #10
I kept getting the following error
sending 'zip' (12605 KB)...
OKAY [ 1.510s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 2.708s
Any help please?
Thanks

error 170[ USB connection error]

i always receive the error 170: usb connection error while restoring the m8 with ruu, i tried in fastboot mode as well as while the device booted.
What should i do?

What is your current firmware number (OS number displayed on bootloader screen)? Post fastboot getvar all, if you know how (delete IMEI and serial number before posting). What RUU version number are you trying to run?
Your bootloader is relocked?
S-on or s-off?
Try a different USB port, the RUUs don't play well with USB 3.0, which many PC's have nowadays.

redpoint73 said:
What is your current firmware number (OS number displayed on bootloader screen)? Post fastboot getvar all, if you know how (delete IMEI and serial number before posting). What RUU version number are you trying to run?
Your bootloader is relocked?
S-on or s-off?
Try a different USB port, the RUUs don't play well with USB 3.0, which many PC's have nowadays.
Click to expand...
Click to collapse
my device is unlocked, do i need to relock the bootloader to work with ruu?

Yugank Kulshrestha said:
my device is unlocked, do i need to relock the bootloader to work with ruu?
Click to expand...
Click to collapse
If s-on, then yes you need to relock the bootloader to RUU.
You can relock the bootloader with the command: fastboot oem lock
But this isn't necessary if you have s-off, which is why I asked if you were s-on or s-off. Its hard to help properly, if you only provide a fraction of the information requested.

redpoint73 said:
If s-on, then yes you need to relock the bootloader to RUU.
You can relock the bootloader with the command: fastboot oem lock
But this isn't necessary if you have s-off, which is why I asked if you were s-on or s-off. Its hard to help properly, if you only provide a fraction of the information requested.
Click to expand...
Click to collapse
i have s-off and relocked boot loader and also i'm doing steps with usb 2.0 port, but the issue is still same.

Yugank Kulshrestha said:
i have s-off and relocked boot loader
Click to expand...
Click to collapse
As I already posted, relocking bootloader was not necessary to run RUU, if s-off. It doesn't hurt anything (running RUU) to do so, but doesn't help anything, either. If you want to make any mods (custom recovery, root, custom ROMs) you'll need to unlock the bootloader again.
---------- Post added at 11:53 AM ---------- Previous post was at 11:50 AM ----------
Yugank Kulshrestha said:
also i'm doing steps with usb 2.0 port, but the issue is still same.
Click to expand...
Click to collapse
I asked a number of question in Post #2 above, only a portion of which you answered (even after being asked again to provide all the requested info):
redpoint73 said:
What is your current firmware number (OS number displayed on bootloader screen)? Post fastboot getvar all, if you know how (delete IMEI and serial number before posting). What RUU version number are you trying to run?
Click to expand...
Click to collapse
You're making it harder for us to help you, by having to ask the same questions over and over.

got these details by running the command : fastboot getval all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid:
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

Yugank Kulshrestha said:
got these details by running the command : fastboot getval all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid:
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
what RUU version you have tried ?
try with that
https://www.htc.com/us/support/htc-one-m8-sprint/news/
Sent from my HTC M8 using XDA Labs