Develop Bugs

Oukitel K8 - Information, News & Software Development | 6.0" FHD+ | 4+64GB | 5000mAh

Oukitel K8 - Information, News & Software Development | 6.0" FHD+ | 4+64GB | 5000mAh
SPECIFICATIONS
Dimensions: 158.7 x 76.3 x 10.4 mm
Weight: 211.5g
Chassis: Metal + Plastic
SoC: MediaTek MT6750T
CPU: Octa Core [4 x 1.5 GHz & 4 x 1 GHz]
GPU: ARM Mali-T860MP2 | 520MHz
Network: 4G/3G/2G
RAM: 4 GB
Storage: 64 GB
Memory cards support: Yes, up to 256GB
Display: 6.0" IPS, 2160 x 1080 pixels, 2.5D AUO LCD, 18:9 Aspect Ratio
Protection: Asahi Glass
Battery: 5000 mAh, 5V/2A fast charger
OS: Android 8.0 Oreo
Back Camera: Sony IMX135 13MP + 2MP [Primary + depth sensor]
Front Camera: 5MP
SIM card: Dual-SIM, Dual-Standby
Wi-Fi: 802.11 b/g/n and Wi-Fi Hotspot
USB: 2.0, Micro USB
Bluetooth: 4.2
Positioning: GPS, A-GPS, GLONASS
Other Features: Fingerprint Scanner (rear), Notification LED, Face ID.
Colors: Space Grey
PICTURES/OFFICIAL RENDERS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OFFICIAL ROM AND ROOTING
Code:
[FONT="Courier New"][CENTER]DISCLAIMER:
I am not responsible for any damage done to your phone or file(s) lost in the process of carrying out these instructions.
Proceed at your own risk and only if you know what you are doing.
You are advised to make a complete backup of your files/Apps/SMS etc. to a safe storage (SD Card, USB Flash, External Drive, PC, cloud, etc) before continuing, as proceeding with (whole) ROM flash and/or DATA DECRYPTION will completely wipe your device.[/CENTER][/FONT]
OFFICIAL ROM AND TWRP RECOVERY
This is the official K8 stock ROM based on Android 8.0 Oreo with build number "OUKITEL_K8_V11_20180710".
The ROM could be used to restore your device to its factory settings or to unbrick your device.
TWRP v3.2.3 & ROOTING
In order to root the device, you have to flash the provided TWRP recovery via SP Flash tool (on PC) and install the latest stable Magisk via TWRP (download Magisk from the official XDA thread).
NOTE: After flashing TWRP, you must root with Magisk, else you'll end up with boot loop.
You can use your phone without decryption but TWRP won’t be able to access your internal storage.
Since the device is encrypted, you must decrypt your device before TWRP can gain access to your storage.
Download the attached TWRP v3.2.3 or from Google Drive.
[SUMMARY] Data decryption
1. Copy Magisk to SD card or USB OTG
2. Boot into recovery, swipe to confirm modification.
3. Go to Wipe > Format Data > Enter yes; wait for completion (Internal storage would be completely wiped).
See full tutorial on how to decrypt your internal storage here.
DOWNLOADS
ROM: Stock
ROM Build: OUKITEL_K8_V11_20180710
Version: 8.0 Oreo
Flash: Via SP Flash tool
Download from
Mega [1.19GB]
Google Drive [1.1GB]
Yandex [1.1GB]
Mail.ru [1.19GB]
OTHER USEFUL TWEAKS (Flash via TWRP).
1. Enable dual ring tones for each SIM >> Download
2. Modded SystemUI apk to disable the large 3G/4G icon on statusbar >> Download
3. Enable Miravision >> Download

Because the device launched with Anfroid 8.0 Oreo out of the box, it supports Project Treble is fully supported.
You should note that the device is that of A-only partition.
I have tested some Android 9.0 Pie GSI ROMs and can confirm it has been a wonderful experience.
I am currently running the AOSP Pie GSI v111.
Below are the GSI ROMs I've tested with their outcomes:
1. AOSP Pie GSI, tested v109 and v111. STABLE.
2. Octopus OS. STABLE.
3. AOSP EXTENDED V6.1. STABLE, You might experience occasional Bluetooth crash.
4. AOSP EXTENDED V6.3. BOOTLOOP.
5. Pixel Experience v20190208. DOES NOT BOOT
6. Pixel Experience v20190324. BOOT LOOP.
7. Resurrection Remix 7 | Jan, Feb & Mar builds. BOOT LOOP.
8. Carbon ROM 7.0 20190306DOES NOT BOOT
9. Dirty Unicorns v13 20190228. BOOT LOOP.
10. crDROID 20190205.BOOT LOOP
11. Lineage OS 16 by Andy Yan v20190313. DOES NOT BOOT
12. Lineage OS 16 by Deepflex 20180905 >>> Link 1 | Link 2. BOOTS BUT FAILED GOOGLE CERTIFICATION. BECOMES UNUSABLE WHEN YOU CONNECT TO THE INTERNET
More ROMs can be found here (as compiled by the user NFound); and from the Project Treble official XDA forum.
Let us know which other ROM is stable and feature rich.

Reserved #2

dwapking said:
Because the device launched with Anfroid 8.0 Oreo out of the box, it supports Project Treble is fully supported.
You should note that the device is that of A-only partition.
I have tested some Android 9.0 Pie GSI ROMs and can confirm it has been a wonderful experience.
I am currently running the AOSP Pie GSI v111.
Below are the GSI ROMs I've tested with their outcomes:
1. AOSP Pie GSI, tested v109 and v111. STABLE.
2. Octopus OS. STABLE.
3. AOSP EXTENDED V6.1. STABLE, You might experience occasional Bluetooth crash.
4. AOSP EXTENDED V6.3. BOOTLOOP.
5. Pixel Experience v20190208. DOES NOT BOOT
6. Pixel Experience v20190324. BOOT LOOP.
7. Resurrection Remix 7 | Jan, Feb & Mar builds. BOOT LOOP.
8. Carbon ROM 7.0 20190306DOES NOT BOOT
9. Dirty Unicorns v13 20190228. BOOT LOOP.
10. crDROID 20190205.BOOT LOOP
11. Lineage OS 16 by Andy Yan v20190313. DOES NOT BOOT
12. Lineage OS 16 by Deepflex 20180905 >>> Link 1 | Link 2. BOOTS BUT FAILED GOOGLE CERTIFICATION. BECOMES UNUSABLE WHEN YOU CONNECT TO THE INTERNET
More ROMs can be found here (as compiled by the user NFound); and from the Project Treble official XDA forum.
Let us know which other ROM is stable and feature rich.
Click to expand...
Click to collapse
Screenshots...

[ROM][Unofficial][beta][Q] AICP 15 for Sony Xperia Z1

What's working:
- Boot : Ok
- GApps : The smaller the better (pico package). If you want for example "Okay google" you need at least nano.
- Partitions (Data, Cache) : Ext4 and F2FS supported
- Bluetooth : Ok
- WiFi : Ok
- WiFi Hotspot : only 2.4 GHz
- RIL - Phone - Data : Ok
- GPS : Ok
- Camera : Ok
- Camcorder : Ok
- Lights : Ok
- MicroSD : Ok
- Accelerometer : Ok
- Compass : Ok
- Gyroscope : Ok
- Touchscreen : Ok
- FM Radio : Ok (mono)
- ANT+ : didn't test (most likely broken)
- Vibrator : Ok
- Microphone : Ok
- Audio & music : Ok
- Bluetooth audio : Ok
- MHL: broken
- NFC : Ok
- Kernel : Ok
- Graphics : Ok
- 3D Rendering : Ok
- Clock : Ok
- Offline Charging : Ok
- USB : Ok
- USB OTG : didn't test
- Encryption : didn't test (most likely broken)
- SEPolicies : enforcing
What's not working:
NFC-HCE does not work (needed for example for google pay)
FM does not work in stereo mode (mono works fine, though)
MHL does not work
5 GHz hotspot does not work (2.4 GHz hotspot works fine)
GPS gets wrong time due to GPS week rollover since 3rd November 2019 (of importance when you record GPS tracks for example).
more to be figured out
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
ROM
TWRP
GApps (Please select ARM 10)
Magisk
Disable_Dm-Verity_ForceEncrypt
INSTALLATION
1.Unlock Bootloader, throw ROM at the Internal Storage or SD card
2. Install TWRP Recovery 3.2.1
3. Boot to Recovery
4. Wipe Cache,Wipe Data,Wipe System and Wipe ART/Dalvik cache
5. Install the ROM
7. Install Gapps
8. Install SuperSU or Magisk
9.Install Disable_Dm-Verity_ForceEncrypt
10. Done!
Sources
honami:https://github.com/Remim7/android_device_sony_honami
rhine-common:https://github.com/Remim7/android_device_sony_rhine-common
msm8974-common:https://github.com/Remim7/android_device_sony_msm8974-common
vendor:https://github.com/Remim7/proprietary_vendor_sony
kernel:https://github.com/Remim7/kernel_sony_msm8974
Credits
115ek
SpiritCroc
NeoArian
drakonizer
rcstar6696
SuperLamic
AdrianDC
nailyk
AICP team
LineageOS team
ROM OS Version: Android 10
ROM Kernel: Linux 3.4.x
Last Updated 2020-03-10
国人可以去国内的论坛
http://bbs.gfan.com/android-9638476-1-1.html

Remim7 said:
What's working:
- Boot : Ok
- GApps : The smaller the better (pico package). If you want for example "Okay google" you need at least nano.
- Partitions (Data, Cache) : Ext4 and F2FS supported
- Bluetooth : Ok
- WiFi : Ok
- WiFi Hotspot : only 2.4 GHz
- RIL - Phone - Data : Ok
- GPS : Ok
- Camera : Ok
- Camcorder : Ok
- Lights : Ok
- MicroSD : Ok
- Accelerometer : Ok
- Compass : Ok
- Gyroscope : Ok
- Touchscreen : Ok
- FM Radio : Ok (mono)
- ANT+ : didn't test (most likely broken)
- Vibrator : Ok
- Microphone : Ok
- Audio & music : Ok
- Bluetooth audio : Ok
- MHL: broken
- NFC : Ok
- Kernel : Ok
- Graphics : Ok
- 3D Rendering : Ok
- Clock : Ok
- Offline Charging : Ok
- USB : Ok
- USB OTG : didn't test
- Encryption : didn't test (most likely broken)
- SEPolicies : enforcing
What's not working:
NFC-HCE does not work (needed for example for google pay)
FM does not work in stereo mode (mono works fine, though)
MHL does not work
5 GHz hotspot does not work (2.4 GHz hotspot works fine)
GPS gets wrong time due to GPS week rollover since 3rd November 2019 (of importance when you record GPS tracks for example).
more to be figured out
Screenshots
View attachment 4968293
View attachment 4968295
View attachment 4968297
View attachment 4968299
View attachment 4968301
View attachment 4968303
Download
ROM
TWRP
GApps (Please select ARM 10)
Magisk
Disable_Dm-Verity_ForceEncrypt
INSTALLATION
1.Unlock Bootloader, throw ROM at the Internal Storage or SD card
2. Install TWRP Recovery 3.2.1
3. Boot to Recovery
4. Wipe Cache,Wipe Data,Wipe System and Wipe ART/Dalvik cache
5. Install the ROM
7. Install Gapps
8. Install SuperSU or Magisk
9.Install Disable_Dm-Verity_ForceEncrypt
10. Done!
Sources
honami:https://github.com/Remim7/android_device_sony_honami
rhine-common:https://github.com/Remim7/android_device_sony_rhine-common
msm8974-common:https://github.com/Remim7/android_device_sony_msm8974-common
vendor:https://github.com/Remim7/proprietary_vendor_sony
kernel:https://github.com/Remim7/kernel_sony_msm8974
Credits
115ek
SpiritCroc
NeoArian
drakonizer
rcstar6696
SuperLamic
AdrianDC
nailyk
AICP team
LineageOS team
ROM OS Version: Android 10
ROM Kernel: Linux 3.4.x
Last Updated 2020-03-10
国人可以去国内的论坛
http://bbs.gfan.com/android-9638476-1-1.html
Click to expand...
Click to collapse
What about network is it OK???

zmdzmd said:
What about network is it OK???
Click to expand...
Click to collapse
You can use WIFI or mobile network to connect to the Internet

Remim7 said:
You can use WIFI or mobile network to connect to the Internet
Click to expand...
Click to collapse
I know . I mean mobile network is OK???for c6902???

Thanks for effort
But I can't use sim card because its unable to use for c6902
I flashed modem 4.01 but it doesn't effect
And unable
Please fix it!!!

I'm a huge fan of custom roms. I like the awesome features of these roms... These are far better than the outdated stock roms.. only downside of this is that you loose the Xperia camera... It will be very thankful, if someone port the Xperia camera for lineage os and Aicp roms...

Hi, I don't know if I'm wrong or if it's a problem. After doing the installation the phone goes very slowly. I come from Lineage 17.1, I did the procedure described in the forum. Could someone help me thanks.

Hi .
Who can make miui 10 or 9 for z1 ???
If you can please do it!

woowww
work on c6903? 4g work ?

i install this rom on my c6903
rom is so beauty
but very lagy
restart in evry app installation

Still no update yet for this rom? The rom is so laggy atm. And there also heating issue. The device can be very hot and restart by itself

[ROM] [10.0] Project Sakura [OFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About US:
Project Sakura is a custom ROM built around Lineage OS 17.1, It tries to remain true to it while also providing some more functionality and UI changes.
DISCLAIMER
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
"This is a user friendly thread, all your suggestions are important to us and will be taken into consideration.."
FLASHING PROCEDURE
CLEAN FLASH :
Download the Build you want to flash, there are two variants(GAPPS AND VANILLA ).
Reboot to recovery
Take Backup (Not Necessary)
Flash the firmware
Wipe System, Data, Cache , Dalvik
Flash the latest build
Reboot
DIRTY FLASH :
Download the latest build
Reboot to recovery
Wipe Cache
Reboot
Note : GApps only has to be flashed once whereas Magisk is to be flashed every time you Dirty Flash the ROM.
Download ROM:PROJECT SAKURA
CREDITS
Lineage OS
AOSP
Superior OS
AOSiP
DerpFest
Pixel Experience
Extended UI
Havoc OS
CrDroid ROM
Important Links
SOURCES
Project Sakura Source
Telegram Group
REPORTING BUGS!
As soon as the problem occurs, take a logcat!
for more READ THIS​
XDA:DevDB Information
Project Sakura, ROM for the ginkgo
Device: ginkgo
Maintainer: Amartya
Build Type: Official
Contributors
@xmxrtyx
few more on telegram
Kernel Source: https://github.com/xmxrtyx/kernel_xiaomi_ginkgo
ROM OS Version: 10.0
ROM Kernel: Linux 4.14.193
ROM Firmware Required: Must be on Latest Firmware
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 2.Q
SELinux Status: Enforced
Stable Release Date: 2020-August-23
XDA:DevDB Information
[ROM] [10.0] Project Sakura [OFFICIAL][08-23-2020], ROM for the Redmi Note 8
Contributors
xmxrtyx
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest
Version Information
Status: Stable
Current Stable Version: 2.Q
Stable Release Date: 2020-08-23
Created 2020-08-24
Last Updated 2020-08-24

What's working
- Boots : yes
- GApps : inbuilt
- Bluetooth : Working
- WiFi : Working
- WiFi Hotspot : Working
- USB Tethering : Working
- RIL - Phone - Data : Working
- GPS : Working
- Camera - Camcorder: Working
- Sensors : Working
- Audio : Working
- Media Playback : Working
- Kernel : Working
- Offline Charging : Working
- USB : Working
- Encryption : Working
- Fingerprint : Working
- SELinux : Enforcing
- Screen recording, microphone and internal audio : Working
- WFD (wifi display/screen cast) : Working

Important
This is a unified build, so it'll work on both ginkgo and willow
GApps is already included
Use any recovery, doesnt matter
Use the latest firmware
ProjectSakura's support group for ginkgo/willow : https://t.me/sakuraxginkgo
Also credits to Trinket-Devs on github

does legacy app scaling work?

no legacy app scaling =____= !

xmxrtyx said:
- Boots : yes
- GApps : inbuilt
- Bluetooth : Working
- WiFi : Working
- WiFi Hotspot : Working
- USB Tethering : Working
- RIL - Phone - Data : Working
- GPS : Working
- Camera - Camcorder: Working
- Sensors : Working
- Audio : Working
- Media Playback : Working
- Kernel : Working
- Offline Charging : Working
- USB : Working
- Encryption : Working
- Fingerprint : Working
- SELinux : Enforcing
Click to expand...
Click to collapse
Please add: Screen recording, microphone and internal audio working
wfd (wifi display/screen cast) working
Good job, man!

nneko904 said:
does legacy app scaling work?
Click to expand...
Click to collapse
loopypalm said:
no legacy app scaling =____= !
Click to expand...
Click to collapse
well there's a similar feature
Fullscreen Apps

xmxrtyx said:
well there's a similar feature
Fullscreen Apps
Click to expand...
Click to collapse
it's not the same
it's when you open an old app you don't see the black bar at the bottom (see picture)

Does this rom have a Mi Camera? And does EIS work?

Great rom. I really love the implementation of Moto Dolby Audio, sounds really really good. Mi Cam is on board. Oneplus launcher also nice.

any screenshots?

Musdi27 said:
Does this rom have a Mi Camera? And does EIS work?
Click to expand...
Click to collapse
yes and yes.

Laievskaia said:
any screenshots?
Click to expand...
Click to collapse
http://projectsakura.xyz

[ROM] [10.0] GODNESS Q [OFFICIAL] [J730X] [STABLE]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
- I am not Responsible for Locked Devices
- Dead Sd Cards
- I do not authorize anyone to use any of the archives of this project Make your own Rom Cover by yourself
- Any questions you can solve in the support group
- If you find any bug let me know through the telegram group or in xda to fix it in V2
If You Like My Work Give "Thanks At XDA
Code:
- Based in A600FN
- Support For J730X, G610X, J530X, J701X, J710X
- Deknoxed
- Optimized Build.prop/floating Feature
- Csc Optimized
- Simple Kernel
- NFC
- Secure Folder Patched
- Signature Disable
- Flag Secure Disable
- Rom Logo
- Camera Features
- Dual Messenger Mod
- Screen Recorder/Smart Capture Note20
- Samsung Sans (1100 Fonts)
- Bootanimation DC
- Game Tools Fixed
- Nabvar (Aroma)
- Goodlock (Aroma)
- Galaxy Labs (Aroma)
- S10 and A50 Wallpapers/My wallpapers
- AdAways (Aroma)
- Magisk 20.3 (Aroma)
- High Sound (Aroma)
- Face Recognition
- Call Filter/Spam Messages
- Home Up
Code:
- Install TWRP Recovery
- Install Create Vendor
- Download the ROM and copy it to your sd card.
- Enter in Recovery and make wipes (Recommended Full wipes)
- Install Rom follow the instructions of the Aroma Installer choose what you want to install then reboot now...
- The rom will start ,configure and enjoy the ROM
Code:
- Remove the sim card before installing the rom
- Do not update Clock and Calendar or crash
- If you find any errors that I or the testers did not find please report here or in the telegram group
- Google Drive
- Mega
- Mediafire
- Godness Projects | Support
- Godness Projects| Updates
- @el0xren For helping me with the rom logo
- @Astrako By the bluetooth fix
- @nibiru23WB For helping me fix some things
- @osyesus By the brown goodlock
- @skyflyteam Help me and support me in all my projects
Thanks to all the testers who supported me in this project:
- @Al3xOmar
- @vega775
- @haiha2001
- @Acacias5070
- @Tio_j7pro
- @DesertK
- @aquileskcho
Designer:
- @vega775
XDA:DevDB Information
GODNESS Q, ROM for the Samsung Galaxy J7 (2017)​
Contributors
DarkGod14
Source Code: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/releases
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Pie bootloader
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-10-31
Created 2020-10-31
Last Updated 2020-10-31

ohh thanks bro, I'm downloading to my j730g <3

Everything fine...
But after this my bootlogo gone...
I mean when I flashed this rom 1st time bootlogo was there
But when I flashed 2nd time bootanimation was gone forever ...
And also VoLTE not working

thanks working fine so far. I did not install the calendar instead I use google calendar after.. thanks

64bit?

Radio fm is work?

Smooth... everything seems to work, but the WiFi.
No way to save WiFi configuration: any data (pwd, MAC, IP and so on) is lost every time...
Ah, FM radio works fine!
**Edit: WiFi Randomizable MAC option is the culprit.
No way to disable it and just use phone's MAC address, therefore there's no chance to connect on a MAC-filtered AP.
De Facto, connection becomes fully operative as soon as the MAC filted on the AP is disabled.
Googling about this problem, it seems to be a well-known bug of several Q ROMs.

> 2. Install Create Vendor
Dear sir, how can i do 2nd step. Please help me

@nguyenduytrungts
Find the following file: Exynos7870_CreateVendor_2.0.zip
and install it via latest TWRP or OrangeFox Recovery, depending on what you currently use.
Once you've done, Vendor Partition is installed and you are ready to install this ROM.

thanks i wil try it

WiFi problem solved:
It's definitely NOT a bug, it's Android 10 privacy rule that simply cannot be overriden, it just asks to be managed this way:
1. Disable the MAC filtering rule on the router.
2. Connect the phone to the desired network SSID.
3. Click on the network settings, then find the MAC setup menu and choose "Use Phone MAC" instead of "Use Randomized MAC".
4. Now, add the REAL MAC address of your phone to the MAC rules of your router.
5. Save, and now re-enable MAC filtering in the router.
6. Done...
Now the phone will require a couple of attempts to achieve the connection to your network but don't worry, it works!

@DarkGod14
Thanks for this ROM
If possible Port Android 11

Saponetto said:
@nguyenduytrungts
Find the following file: Exynos7870_CreateVendor_2.0.zip
and install it via latest TWRP or OrangeFox Recovery, depending on what you currently use.
Once you've done, Vendor Partition is installed and you are ready to install this ROM.
Click to expand...
Click to collapse
Which twrp version is advised ? Please

@nguyenduytrungts
TWRP 3.4.0.0 is recommended

Saponetto said:
@nguyenduytrungts
TWRP 3.4.0.0 is recommended
Click to expand...
Click to collapse
Twrp 3.4.0.0
https://t.me/s/J7Series

Is adoptable storage available or do i need root essentials?

Thx for this rom again , after 5 days with this rom , i have 2 pb to solve , the first the rom use a lot of memory and the phone will be so slow , the second , yes thare is Magisk and it rooted but i can't realy name a true root because i can't unnistal system app for example , and i use Xposed and it is not the same like Android Pie ...any helps ! Thank you.

Is this arm32?

[ROM][10][ARM64] MIUI EU Ports for J7 2016

First notes: These are ROMs, not GSIs (kind of), I won't accept any inquiries if you flash it on a different device and break it
Introduction:
These are 2 ports of MIUI 12 with Android 10, those ROMs are made to be stable enough for usage, leftover bugs are unfixable or too complicated to. MIUI EU is a distribution of MIUI with international languages and extras like Themes. STABLE build is the latest official build with latest Android Security patch, suggested if you use it daily, WEEKLY build is made with the latest MIUI version, it has extra features and new UI elements, but might be sluggish for daily usage since it is Beta.
Spoiler: MIUI EU STABLE 12.5.3 PORT
Informations:
Full port of MIUI EU 12.5.3 Stable from the Redmi Note 7 device
June 1st 2021 Security patch
The majority of things are fixed/working
Latest NikGapps Core is included (Chrome, Play Store and GBoard)
Debloated
Download links:
Google Drive
Mirror link
Spoiler: MIUI EU WEEKLY 12.6 (13) PORT
Informations:
Full port of MIUI EU 21.4.6 - 12.6 Beta from the Redmi Note 7 device
May 1st 2021 Security patch
The majority of things are fixed/working
Latest NikGapps Core is included (Chrome, Play Store and GBoard)
Debloated
Download links:
Google Drive
Spoiler: What is/is not working
What is working:
Wi-Fi
SIM1 Mobile data + RIL
Bluetooth
Brightness
Camera
Flashlight
Hotspot (Read FAQ)
Lockscreen
Physical home button
What is not working:
NFC
Bluetooth Audio - read FAQ
Auto Brightness - our device does not have a light sensor so just turn it off and ignore
SIM2
MIUI Camera - replaced with FootejCamera
Headphones detection
SD card detection in apps
Stretched front camera in apps
Always On Display
Spoiler: FAQ
FAQ answers:
NFC: might be fixable
Bluetooth Audio: you can send files but paring with a headset will force crash it, since MIUI is made to use Qualcomm Bluetooth chip, when our phone uses Broadcom's
SIM 2: our chipset cannot handle the dual LTE functions of MIUI so it is limited to 1 SIM, otherwise you cannot use RIL at all
Headphones: they do work, but to enable them, use the included LesserAudioSwitch app to switch your audio output to them
Hotspot: go to it's settings, choose Setup Portable Hotspot and Device Identification, then select Default
Always On Display: requires deep knowledge in kernel compilation so no
Elements are big when I install the rom: read 2nd post
Lags so much on homescreen: Change to a normal wallpaper, the default Super Live Wallpaper is very heavy so don't use it
Spoiler: How to install
1. Backup your data
2. Install OrangeFox R11 recovery, do not use R11.0-1 or R11.1
3. Flash the Repartition Script included in the Drive Folder
4. Flash the ROM zip
5. Flash root or reboot to system
6. Wait for 6 minutes after the MIUI logo shows then perform a force reboot by holding Power + Volume Down for 5 seconds until the phone restarts
7. Wait until it boots and you are good to go
8. Enjoy then come back and hit thanks
Note: follow this 2nd post right after the rom is installed
Spoiler: Screenshots
Check 3nd post for screenshots
Credits:
@el0xren for fixes and let me spam his PM
@GonicTEAM for vendor and stuff
@Astrako for Simple Kernel and Repartition script
@AzSuperBored for home button fixes
@TrebleExperience for tool
Support: Telegram Group
Contact me at here, keep in mind I do not read PMs
Source Code: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/tree/simple_q_permissive
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo Bootloader
Based On: MIUI 12.5.3

After the ROM's installation, follow:
Go to Settings > My Device > All specs, press 7 times to the MIUI Version button, go back to Settings > Additional settings > Developer options, scroll down and change the Smallest Width to 411 (small ui) or 450 (large ui)
Then to fix Large Status Bar padding, find the line below it, it should says "Emulated Corner Cutout", select NotchKiller
Video tutorial here

Screenshots
MIUI 12.3.5 Stable
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MIUI 21.4.22 - 12.6 beta

best 7870 ROM so far?

el0xren said:
best 7870 ROM so far?
Click to expand...
Click to collapse
hope it is

lmao nice

it works J730f?

soniakos444 said:
it works J730f?
Click to expand...
Click to collapse
It's only for J710 so far, I will share it if anyone ports it for your device.

Does it work on SM-J710FQ?