SystemFS\User\MultiStage\Contents.xml
You could extract this file from *.FFS or grab from handset.
Maybe some tweaking possible...
S5PC110_EVT1_UM10.pdf
2D Graphic Engine
− BitBLT
− Supports maximum 8000x8000 image size
Click to expand...
Click to collapse
<FileFormat>
<JPG>
<MaxFileSize value="4096000"/>
<MaxWidth value="5000"/>
<MaxHeight value="5000"/>
<ThumbNail>
<MaxWidth value="1280"/>
<MaxHeight value="1024"/>
</ThumbNail>
</JPG>
There are more infos in this file...
<MaxInstallCount>
<NativeApp value="100"/>
<NativeWidget value="50"/>
<JavaApp value="-1"/>
</MaxInstallCount>
</AStore>
</Contents>
</SDP>
Check out, maybe interesting or helpfull.
Best Regards
I already tryed to increase the max. resolution to 8000x8000px for jpg a week ago but it didnt worked
This file exists 2 times and I flashed them correctly to the wave (tested with sTunes after flash), the limits seems to be set somewhere else...
The image sizelimit is also higher than 4096000 byte (or what it is) - about 10 mb.
I would have liked to tweak this setting to 200 or more and see but unfortunately there are not that many good apps to install.
<MaxInstallCount>
<NativeApp value="300"/>
<NativeWidget value="50"/>
<JavaApp value="-1"/>
</MaxInstallCount>
Btw, what does this Java value mean ? Could it be that it controls whether to show icon in Menu or not ?
SystemFS\User\MultiStage
User\MultiStage
@ st0rmi
Thanks.
Yes, via sTune this file is twice.
It seems writeprotected files are most in folder SystemFS... as Backup.
If you check via TriX Firmware files. Then Contents.xml is in *.FFS... maybe edit before flashing. Then changes in both files on handset.
Not tested yet...
@ rex4u
At the moment I have nothing changed in this file, so no idea what happens.
Maybe soon few tests...
Best Regards
@adfree: Yeah thats what I have done
I just used sTunes to copy the contents.xml back to my pc and view if the edited xlm are really on my phone because it didnt worked...
@adfree
No bro' I was offering my own suggestions to this configuration file.
It might allow us to install more than 100 apps in phone and show in Menu.
Second it might show Java apps icons in Menu.
My 2 cents
xml parser
please help me
a want to parser punker xml data base.
rex4u said:
I would have liked to tweak this setting to 200 or more and see but unfortunately there are not that many good apps to install.
<MaxInstallCount>
<NativeApp value="300"/>
<NativeWidget value="50"/>
<JavaApp value="-1"/>
</MaxInstallCount>
Btw, what does this Java value mean ? Could it be that it controls whether to show icon in Menu or not ?
Click to expand...
Click to collapse
it's into the 'app counter' field, '-1' may be means 'unlimited' number of java apps installable, but I haven't read yet the whole xml... anyway if it is editable it's an interesting thing..
I saw that file a while ago while looking for something inside my phone (very special thing that made me to copy the whole phone)
there is a lot of interesting things but i never tried tweaking it
Maybe if someone have enough knowledge to add few new extensions and test them
Also removing some stupid limits would be awsome
Sorry i've no time to test that with you guys but would appreciate results
Best Regards
You dont need modif ffs or other just use pfs file to modif what you want and in real time direct phone flash pfs file and not have write protect problem
Just says Thank
Example file : dont give attention of boot img cause i dont take time to do it in 800x480 but its 400x240 then its make bug but with pfs file you can upload anything you want to change !!!
Good hack !!!
Maybe with this you can create dual boot or i dont know what a pro smoker can do, you can also try to put her rc2 or rc1 directory i dont try it !!!
Download example, in this one you can see SystemFS and Registry directory, off course you can put her all directory you want to flash pfs, using trix to modified or wave remaker more faster :
https://rapidshare.com/files/809973956/Circle.pfs
An idea its like you can make your one firmware with personal Widget installed and other idea welcome....Just take file registry and Widget folder on phone and put it on PFS
i can not open new thread
i went to parser an xml file with structure like this.
<?xml version="1.0"?>
<node1>
<node2>
<node3>
<node4>
<node5>
text
</node5>
</node4>
</node3>
</node2>
</node1>
Click to expand...
Click to collapse
Hi all, using TkFileExplorer 2.4 you can see and edit Bada system files, in this thread I will report all usefull changes I will find and you could perform using this tool
If you find something other, you might write it here so we have all them collected in the same place
How to use TkFileExplorer:
-Connect your wave to PC with usb cable;
-Select USB Debug connection;
-Start TkFileExplorer and clic Connect;
-if the program fails to connect, try changing the COM port number in Settings;
-Make a backup of the files you change;
-...and try at your own risk!
Changing default browser brightness:
File: Phone:/Settings/Default/Registry/BrowserSettings.ini
Customize power on/off screen:
for configuration:
File: Phone:/Settings/Default/Registry/PowerOnOff.ini
for resources:
Directory: Phone:/SystemFS/PowerOnOff/
Change volume presets for calls, audio player, fm radio, video player, ringtone...:
File: Phone:/SystemFS/Driver/volpresets.xml
Cleaning themes preview images:
Simply clean the files in:
Directory: Phone:/User/Mass/Theme/Default/
Change camera settings:
File: Phone:/Settings/Default/Registry/CamSetting.ini
File: Phone:/SystemFS/Driver/CameraCaps/DevCamDeviceCapsNConfig_Primary.xml [only Bada 1.2]
Change Samsung LBS settings:
File: Phone:/Settings/Default/Registry/LbsConfig.ini
for using external bluetooth gps antenna, change BtGPS=1 (not tested yet) in:
File: Phone:/Settings/Default/Registry/LbsAppRegistry.ini
Usefull directories:
Internal user storage: Phone:/Media
MicroSD storage: Phone:/Mount/Mmc
Preinstalled apps: Phone:/Osp/Application/
Hey thanks a lot for the heads up! I just had a question... Can we really change the intro animation..? I mean completely replace it..? Or is that not possible??
Reply soon....
Hi all, I find the file /User/OspSys/LifeLog/Database/lifelog.db.
It's SQLite (view by sqlitebrowser.sourceforge.net )
There are many information, calls, deleted messages (but only 100 chars).
I hope, it's information isn't send anywhere, because my wave is trying to connect once a day (it's maybe one of the widget)
sonalswaroop said:
Hey thanks a lot for the heads up! I just had a question... Can we really change the intro animation..? I mean completely replace it..? Or is that not possible??
Reply soon....
Click to expand...
Click to collapse
hi, today I just gave a quick look to all files, but I think it's possible, in PowerOnOff.ini there are clear bindings to two .swf files and a startup / shutdown .wav sound contained in the resource path Phone:/SystemFS/PowerOnOff not sure, need to watch those files, I'll verify in next days..
guari said:
Change volume presets for calls, audio player, fm radio, video player, ringtone...:
File: Phone:/SystemFS/Driver/volpresets.xml
Click to expand...
Click to collapse
Yes, you can change this too in Trix but in fact nothing change. Exp. you can't change "volume level" (exp. in MediaPlayer there is limit to 14 steps, if you change that to 15 steps and add one more <spklevel> and <earlevel>-so that there will be 15 steps, but nothing change in Wave, you can still able go to max. 14 steps in MediaPlayer) and you can't change that may mp3 playing miusic lauder as well as playing video, even if you copy and paste settings from VideoPlayer to MediaPlayer (only test that on speaker not on headphones).
In Registry\MainMenu_reg.ini you can remove any icons from the main menu (except SamsungApps). The file format is clear, I will note only that the system items will have MenuType=0, custom user applications - MenuType=1, SamsungApps - MenuType=2.
And, of course, make a backup before any manipulations with MainMenu_reg.ini
to be clear
adfree had made all those expermintes before & we already know these things
if there is something new please post it
Is there a file in registry where are the settings for the screen lock?Or other display related settings?
azcv said:
Is there a file in registry where are the settings for the screen lock?Or other display related settings?
Click to expand...
Click to collapse
Unfortunately I have not found anything like that using tkFileExplorer...
Assuming that replacing original browser it's difficult to do, source code is available (http://opensource.samsung.com/reception/reception_main.do?method=reception_list&menu_item=mobile thanks to sabianadmin) but the browser seems deeply integrated in the os files (also notice that Samsung Dolfin is not the open source browser Dolphin..): is there anyone who found in filesystem files the textures used by the browser GUI? if aren't cripted it will be possibile to change them for having a more usable GUI on our little screen (I'm thinking of upper/lower bars..)
guari said:
Assuming that replacing original browser it's difficult to do, source code is available (http://opensource.samsung.com/reception/reception_main.do?method=reception_list&menu_item=mobile thanks to sabianadmin) but the browser seems deeply integrated in the os files (also notice that Samsung Dolfin is not the open source browser Dolphin..): is there anyone who found in filesystem files the textures used by the browser GUI? if aren't cripted it will be possibile to change them for having a more usable GUI on our little screen (I'm thinking of upper/lower bars..)
Click to expand...
Click to collapse
I think the browser user interface might be in the file called BrowserAppControl.so which can be found in the SystemFS>Osp folder. All files in that folder are in .so formats. But they are RSA 1024bit signed. And they are not like other settings in phones which are written in html or xml. These files are similar to the .dll files on Windows. .so files are Linux format files.
Is there anyway to modify an *.ini file to enable "Noise Reduction" to always be on during calls?
tibere86 said:
Is there anyway to modify an *.ini file to enable "Noise Reduction" to always be on during calls?
Click to expand...
Click to collapse
I will check on that and get back to you.
astrotom said:
I will check on that and get back to you.
Click to expand...
Click to collapse
Thank you astrotom!
Can I changing default brightness in the VideoPlayer?
Hello
This software doesn't work with my phone. I can't click on the connection i receved error message : "Warning : Unable to open the specified port. Please try again". But i can't configure in the settings.
Thanks for your help.
I'm sory for my bad english, but i'm french.
vort said:
Hello
This software doesn't work with my phone. I can't click on the connection i receved error message : "Warning : Unable to open the specified port. Please try again". But i can't configure in the settings.
Thanks for your help.
I'm sory for my bad english, but i'm french.
Click to expand...
Click to collapse
i got the same error
im running the latest firmware s8530DXKB1/s8530OLBKB1
you have to specify the port you are using for connection from settings
in Phone:/SystemFS/Driver/CameraCaps/DevCamDeviceCapsNConfig_Primary.xml
you can change max ISO and max resolution parameters for phone camera, so you can set iso1600 or 8mp for photos, probably it is useless but it's still a hack
thanks to: http://www.badaitalia.com/2011/06/13/fotografie-con-poca-luce-a-iso-1600/
(on Bada 1.0.2 this system folder is missing so it's not possible..)
Yeah, I read it. Tonight I'll try and I'll let you know.
I request the possibility to upload log files to xda. Actually I have to rename our compress them.
Use http://pastebin.com/
For log files, the best thing is to either embed them in the post - use the CODE tag (the part that is relevant) - or to zip them up to save space, then attach them.
I've used pastebin for very large sizes, doesn't overload xda and you can read it directly.
I need help please. I am working with a friend making an app. We are both not that clever with android
What we are trying to do..
We have 3 locations location1 ID1 location 2 ID2 location3 ID3.
I have an external ftp which had lots of images on 20 png files for each ID. they are updated every 6mins and the oldest is deleted.
The files are called ID.datetime.png .
So what im trying to do is when picked the location name it then goes to the ftp and gets the newest 6 png files for that station id.
Can someone tell me how to do this or share some code, thanks
PS the ftp is annon/annon too
thanks again
Hey man. I dont think you are on the right way.
What i think: you need to make some logic on server side^ your app call that method and get all links to images, and then uload it on the APP