Does anyone have the stock recovery for the galaxy note 10.1 2014 (P600)? I've got a problem with TWRP not mounting the cache and i'm going to try to flash the stock recovery to see if it works then.
SPV2010 said:
Does anyone have the stock recovery for the galaxy note 10.1 2014 (P600)? I've got a problem with TWRP not mounting the cache and i'm going to try to flash the stock recovery to see if it works then.
Click to expand...
Click to collapse
You can Odin any stock recovery, it's not version dependent. There is one in the CF-autoroot thread, http://forum.xda-developers.com/showthread.php?t=2490805 , just download the 7z zip extract and the stock recover should be in there, then use Odin to flash.
Related
:crying:
johnaztigen said:
:crying:
Click to expand...
Click to collapse
I have a Samsung Galaxy Tab 3 7.0 as well. I'm guessing you tried to flash a ROM and got stuck in a bootloop
here's and easy fix. Try searching for the Stock Rom and firmware then download it and flash it onto your device using odin. If you
can still access Recovery try using that to flash it. If this doesnt work try downloading SEAL ROM from here and then put it onto your SD card, then go onto recovery WIPE DATA and CACHE then
flash the SEAL ROM. If you cant access Recovery flash with odin.
Hi this is a long post so I will highly appreciate it if anyone helps me even after reading this.
I was on xperia z-ized v3.4 (based on android 4.3) with mj5 as the bootloader. I was tired of that rom and wanted to try dn3 rom and downloaded the zip as well but the OP of the rom thread said that twrp recovery is recommended over cwm. So I went to thread given in the page which showed me how to flash twrp. It was just download the zip and flash it in recovery, which is exactly what I did. Now ever since then I am not able to turn on my phone, nor does it go to recovery, it just goes into download mode which made me change my decision. Now I am thinking to downgrade back to 4.1.2 and I will try dn3 rom later on. I downloaded the firmware from sammobile but just wanted to ask that given my previous firmwares and flashes, is it safe to flash or will I risk bricking my phone.
Thanks for reading this and please help me out if you can
RazaVakil7995 said:
Hi this is a long post so I will highly appreciate it if anyone helps me even after reading this.
I was on xperia z-ized v3.4 (based on android 4.3) with mj5 as the bootloader. I was tired of that rom and wanted to try dn3 rom and downloaded the zip as well but the OP of the rom thread said that twrp recovery is recommended over cwm. So I went to thread given in the page which showed me how to flash twrp. It was just download the zip and flash it in recovery, which is exactly what I did. Now ever since then I am not able to turn on my phone, nor does it go to recovery, it just goes into download mode which made me change my decision. Now I am thinking to downgrade back to 4.1.2 and I will try dn3 rom later on. I downloaded the firmware from sammobile but just wanted to ask that given my previous firmwares and flashes, is it safe to flash or will I risk bricking my phone.
Thanks for reading this and please help me out if you can
Click to expand...
Click to collapse
Well if you still want to try DN3 ROM you can flash philz recovery tar.md5 via odin and then once you boot into recovery you can get twrp zip file that you downloaded previously and flash twrp over philz.That's what i do when i switch recoveries.I never used CWM except when i was on 4.1.2 but once i rooted my phone the same day i switched to philz.If you don't want to try dn3 at the moment yes you can go back 4.1.2 since you are on mj5 bootloader which makes downgrading back to 4.1.2 possible.I'm giving you links below for philz tar.md5 and instructions on how to flash it via odin incase you change your mind.
philz tar.md5
Put your phone into download mode,open odin on pc,uncheck auto reboot in odin,dont touch anything else,connect phone to pc,wait for port ID to lit up and be blue.Select the AP/PDA tab and navigate to flash this downloaded philz tar file.Click start and you are done.Exit odin on pc.Pull battery out your phone.Wait a minute then put it back in and manually enter recovery mode your newly flashed philz recovery will load.Now go and install twrp recovery zip file and select "reboot recovery" in philz advanced options.Your twrp recovery will load.Do all the wipes in twrp by going under advanced wipe (dont wipe external sd and otg) this will fully wipe your internal phone memory clean then go back to main menu and flash DN3.Enjoy.
singhpratik87 said:
Well if you still want to try DN3 ROM you can flash philz recovery tar.md5 via odin and then once you boot into recovery you can get twrp zip file that you downloaded previously and flash twrp over philz.That's what i do when i switch recoveries.I never used CWM except when i was on 4.1.2 but once i rooted my phone the same day i switched to philz.If you don't want to try dn3 at the moment yes you can go back 4.1.2 since you are on mj5 bootloader which makes downgrading back to 4.1.2 possible.I'm giving you links below for philz tar.md5 and instructions on how to flash it via odin incase you change your mind.
philz tar.md5
Put your phone into download mode,open odin on pc,uncheck auto reboot in odin,dont touch anything else,connect phone to pc,wait for port ID to lit up and be blue.Select the AP/PDA tab and navigate to flash this downloaded philz tar file.Click start and you are done.Exit odin on pc.Pull battery out your phone.Wait a minute then put it back in and manually enter recovery mode your newly flashed philz recovery will load.Now go and install twrp recovery zip file and select "reboot recovery" in philz advanced options.Your twrp recovery will load.Do all the wipes in twrp by going under advanced wipe (dont wipe external sd and otg) this will fully wipe your internal phone memory clean then go back to main menu and flash DN3.Enjoy.
Click to expand...
Click to collapse
Thanks a lot for the help, unfortunately I didn't like dn3 that much so tried to go back to stock but odin shows fail, so stuck with dn3 for a while until I find a solution
RazaVakil7995 said:
Thanks a lot for the help, unfortunately I didn't like dn3 that much so tried to go back to stock but odin shows fail, so stuck with dn3 for a while until I find a solution
Click to expand...
Click to collapse
Well try other 4.4.2 custom TW rom,dn3 isn't the only ROM available on xda for our note II.Look around and I am sure you'll find something that suits you.
singhpratik87 said:
Well try other 4.4.2 custom TW rom,dn3 isn't the only ROM available on xda for our note II.Look around and I am sure you'll find something that suits you.
Click to expand...
Click to collapse
Actually to be honest I want to go back to stock but I odin shows fail, so is there any workaround for that.
PS: even dn3 doesn't boot up now after flashing. Stuck on the note II logo. Tried wiping cache, dalvik cache and factory reset but to no avail
RazaVakil7995 said:
Actually to be honest I want to go back to stock but I odin shows fail, so is there any workaround for that.
PS: even dn3 doesn't boot up now after flashing. Stuck on the note II logo. Tried wiping cache, dalvik cache and factory reset but to no avail
Click to expand...
Click to collapse
Well which recovery are you using now?TWRP?Do you have a back up of any ROM? I suggest go under advanced wipe and wipe everything except external sd card and otg.This will fully wipe your phone.Other suggestion is flashing stock 4.4.2 ROM and then trying custom ROM.
singhpratik87 said:
Well which recovery are you using now?TWRP?Do you have a back up of any ROM? I suggest go under advanced wipe and wipe everything except external sd card and otg.This will fully wipe your phone.Other suggestion is flashing stock 4.4.2 ROM and then trying custom ROM.
Click to expand...
Click to collapse
Tried whatever you said just now, still not booting up. I am on philz recovery and I did not take any backup. I only have stock 4.1.2 rom which is not getting flashed via odin and I cannot download stock 4.4.2 because my internet connection is slow..
what should I do?
i have a note 2 gt7100 with phantom rom and nadia kernel now is on a bootloop i did wipes and flashed 4.1.2 and then 4.3 stock but still in bootloop
Similar problem: Stuck in bootloop
Shady95 said:
i have a note 2 gt7100 with phantom rom and nadia kernel now is on a bootloop i did wipes and flashed 4.1.2 and then 4.3 stock but still in bootloop
Click to expand...
Click to collapse
Seniors Pls help!
I was on stock ROM till now and one fine day my Note 2 suddenly switched off and since then its in bootloop. I tried everything(almost), flashing the latest firmware from sammobile, rooting, custom ROMs...nothing is working! The custom ROM and Bootloader installs using odin end with 'SW REV. Invalid magic string' or 'SW REV. check fail'.
Please suggest and point in the right direction.
pickup a stock rom first and flash it.
then, install any rom
Anderso said:
pickup a stock rom first and flash it.
then, install any rom
Click to expand...
Click to collapse
when i try to wipe or format data i get an error i think this is the problem...
Shady95 said:
i have a note 2 gt7100 with phantom rom and nadia kernel now is on a bootloop i did wipes and flashed 4.1.2 and then 4.3 stock but still in bootloop
Click to expand...
Click to collapse
i think....
nadia kernel is only Android 4.4
Strawberry_dev said:
i think....
nadia kernel is only Android 4.4
Click to expand...
Click to collapse
Phantom rom worked fine with Nadia now i'm monting 4.3 stock but still in bootloop and i flashed CWM recovery... when i format or wipe data i get an error: error mounting/ data
... someone can give me .pit file try to perform a repartiotion?
try again flash with the Team Win recovery.
Trying to flash stock rom via odin..
enyaman said:
try again flash with the Team Win recovery.
Click to expand...
Click to collapse
ok i try but i have already tried with CWM and didn't work and also i have tried flash 4.3 with .pit file to perform a repartition but nothing...
Do this flash latest twrp or philz recovery wipe everything flash phantom only and reboot recovery than wipe cache and dalvik cache flash rom again only now reboot to system , if it doesn't work than try older version of twrp or philz supporting 4.3
Hi. I have problem with TWRP installation on Samsung Galaxy Tab 3 10.1 (GT-P5210, soft: SAMSUNG Official). I tried to install TWRP, but when I flash it with Odin, I have stock recovery. I found somewhere that auto-reboot should be unchecked, so I tried once again and... still the same problem.
1. Should I root my tablet before install TWRP?
2. How I can solve this?
TWRP source: http://forum.xda-developers.com/galaxy-tab-3/development-10/rom-cyanogenmod-12-1-t3100789
Sorry, for my English.
Dear all,
I would like to know how I can install TWRP on a samsung galaxy s4 mini?
- S4 mini 4G LTE (international version serranoltexx)
- Odin latest version
- I use the serranoltexx variant of TWRP .md5
I use Odin latest version and the TWRP version of XDA: But every time I try to get into TWRP get stock recovery, with FAIL:
First I still had the set of warrenty bit recovery fail. But that is now gone.
Someone who can help me? This is because it wants to install LOS on it, so it works better than the stock ROM.
Flash TWRP
I also had the same problem, but i solved it by flashing CWM first, and then, using CWM, i flashed TWRP (custom-twrp-3.2.0-1-serranoltexx-STABLE-signed.zip). With it i flashed LineageOS 15.1 (lineage-15.1-20180222-UNOFFICIAL-serranoltexx.zip) with no problem.
Root with Kingoroot and flash .img file with Flashify