HERE is my problem
2 days ago i installed NXT 1.3 LE and i flashed DooMKernel(V14) . every thing worked fine until today. i was downloading a movie while i was whatsapping suddenly the phone began to lag badly so i tried to stop a few thing (downloads and whatsapp). then the phone froze. after waiting for 15 minutes i removed the battery and booted it again. the phone vibrates but the screen remains blank forever until i pull out the battery
what should i do ??
Xperia Gamer said:
HERE is my problem
2 days ago i installed NXT 1.3 LE and i flashed DooMKernel(V14) . every thing worked fine until today. i was downloading a movie while i was whatsapping suddenly the phone began to lag badly so i tried to stop a few thing (downloads and whatsapp). then the phone froze. after waiting for 15 minutes i removed the battery and booted it again. the phone vibrates but the screen remains blank forever until i pull out the battery
what should i do ??
Click to expand...
Click to collapse
Maybe yo have to flash it with flashtools, when I can't boot my phone I fix with it. Good luck.
Sorry for my english.
ivan_kozzi said:
Maybe yo have to flash it with flashtools, when I can't boot my phone I fix with it. Good luck.
Sorry for my english.
Click to expand...
Click to collapse
i have already tried That it is not working. by the way i just found what the problem was. MY FLEX CABLE IS BROKEN/DETACHED.
HOW DO I FIX THIS?
I really don't know how to repair this problem, you should look into ebay or something and they can't help you ince you buy the flexor
If your flex cable is broken follow this youtube video this is a complete xperia play disassembly. Where to find parts Ebay.
http://www.youtube.com/watch?v=vRjC19j2m48
So i have a big problem with my xperia arc s. after i bought it from ebay i flashed it with ultimate hd 3.02 .. and then i flashed lupus v10 kernel .. everything was ok but after sometime it started showing problems it started to freeze all of a sudden and then it used to shutdown by it self and when i try to turn it on nothing will happen . and after some indefinite time it will turn on again . after some days it turned off and never turned on , no matter how much i tried . so i went to the sony care center they said mother board is dead. so i was totally hopeless but after 2 months .. i was just curious and i tried to charge the mobile and surprisingly the green light turned on which meant it was getting charged which never happened before .. i pressed the switch and it turned on . it worked totally fine for around 2 hours and then it froze again and it wont turn on any more . so i just cant figure out whats wrong with the phone.. PLZ help.. any help is appreciated ..thanks
Did you try to restore stock firmware at any point? Either with Flashtool or PC Companion or EMMA?
Someguyfromhell said:
Did you try to restore stock firmware at any point? Either with Flashtool or PC Companion or EMMA?
Click to expand...
Click to collapse
i could not . because once i shutdown the phone for anything , it wont turn on instantly so it was really difficult to get it in fastboot mode.. and now its just like dead no light nothing ..
Thanks for the reply kanaksharma .. i will contact u as soon as i get back to home .. which might take a few days ... at least i hv some hope now
If the Sony centre said the motherboard had problems, I'm not sure you will be able to repair it completely without sending it to repair for a new motherboard.
Brambleclaw said:
If the Sony centre said the motherboard had problems, I'm not sure you will be able to repair it completely without sending it to repair for a new motherboard.
Click to expand...
Click to collapse
yeah i know but there is no harm in trying ..
This is exactly the same issue I had. I solved it by replacing the mainboard / motherboard. Read my thread about it here:
http://forum.xda-developers.com/showthread.php?t=2462281
The only way to fix this is by replacing the mainboard / motherboard.
Sent from my Xperia Arc S using Tapatalk
Bricked after Update of New firmware for the Smartwatch 2 to version 1.0.B.3.46/1.0.A.3.8
Hello,
Today Morning my watch updated on it's own I presume to New firmware version (1.0.B.3.46/1.0.A.3.8. ( flashing and the wavy display) after update it felt quite sliugissh so I decided to update using the utility .
The utility indicated new update available but when I tried to update it said failed . After that the watch refuses to turn on .
I have tried following
1. USe the 15-20 sec reset using power button - NO use
2. Tried to update again using the Sony Update utility ( The watch is recognized - it tries to update and then quickly says failed)
3. Charged it for almost 3 hours and tried again - Same result .
Now going by the other messages I have to try following
1. Charge overnight and try again
2. Leave it without power for few days and try again.
Does anybody know some other trick.
I cannot easily return it to Sony as at the moment travelling in Africa
Anil
What kind of charger you use? Try to turn on with wallcharger in it!
Sent from my LT29i using xda app-developers app
It could be that the power button is somewhat stuck, try and push in the face of the watch, that happened to me some days ago, watch turned off itself and I couldn't turn it back on.
So I remembered someone saying that they had the power button stuck and shortly after the watch became loose; mine seemed fine but (not sure if it was that) I pushed a little on the face as to fit it better and there you go, it powered on again.
It's a long shot, but hey, doesn't hurt to try...
Sent from my C6833 using Tapatalk 2
I had the same exact issue
Just try to install the software with another computer with update service
Sent from Sony Tablet Z
I have the exact same problem.
I cannot reinstall the software because it fails every time.
Is there a way to hard reset or return to the previous firmware?
GeorgeCm said:
I have the exact same problem.
I cannot re install the software because it fails every time.
Is there a way to hard reset or return to the previous firmware?
Click to expand...
Click to collapse
Till now Not found a solution or alternatives ways
@ BLK900 ->> BTW I have tried on three different machines with Firewalls off /AV switched of to rule out any outside interference .
@ fastest83 ->> The power button is working fine as after pressing it it detects the watch in update service .
I think something is botched up in sony update service .
I found a thread on http://talk.sonymobile.com/t5/Wireless-accessories/bd-p/accessories/page/2 - where one user had excatly same problem after running update on SBH52 ( bluetooth headset launched at the same time). He allowed the battery to fully run down before running the update . I am going to try that
Anybody has a idea when the battery will run out in off state ( while running mine used to last 2-3 days)
Sony must fix the update service or provide us a manul way to flash older firmware . so far my emails to service have not yeilded any results . getting the same boilerplate message run the update service or return it back for repair .
Anil
pranil said:
Till now Not found a solution or alternatives ways
Anybody has a idea when the battery will run out in off state ( while running mine used to last 2-3 days)
Sony must fix the update service or provide us a manul way to flash older firmware . so far my emails to service have not yeilded any results . getting the same boilerplate message run the update service or return it back for repair .
Anil
Click to expand...
Click to collapse
As for the battery, I'd expect at least 2 weeks while off, maybe even more...
I would try to run the update service several times (if it recognise the watch, that means the watch is somewhat on) to see if the battery runs out faster...
Sent from my C6833 using Tapatalk 2
does it show a number at the top left when switching on before the sony logo? i had the same issue today but fixed it.
derkie said:
does it show a number at the top left when switching on before the sony logo? i had the same issue today but fixed it.
Click to expand...
Click to collapse
i have the number .3 25 11.
i can't pair the sw2 with my nexus 5. i don't know why!
someone can help me? what can i do?
danymexi said:
i have the number .3 25 11.
i can't pair the sw2 with my nexus 5. i don't know why!
someone can help me? what can i do?
Click to expand...
Click to collapse
Mine after showing that error code, it vibrates 3 times... All I did is charge it until the pairing animation shows up then I paired it manually via Bluetooth - it paired and it booted twice and that's it.
derkie said:
Mine after showing that error code, it vibrates 3 times... All I did is charge it until the pairing animation shows up then I paired it manually via Bluetooth - it paired and it booted twice and that's it.
Click to expand...
Click to collapse
when the sony battery is 100% my sw2 didn't reboot in pairing animation. and if i press the power button, it vibrates 3 time and i can't pairing the phone. it said i can't piar because the pin or the passwork are wrong. but i didn't put any password or pin.
Can someone help me?
danymexi said:
Can someone help me?
Click to expand...
Click to collapse
Try the pairing with another smartphone, then when paired use the icon Settings on the SW2 to reset it, and then try the pairing again with your smartphone.
Dead
My smartwatch 2 stopped responding the 2nd day I bought it. It was showing the Sony logo and that was all. Tried updating with SUS, went ok and when restarted phone it shows logo and. 3 25 11 code. The phone is detected in SUS but update atempt fails. Tried charging, it appears that is charging but the percentage doesn't rise until restart. I think is dead.
pranil said:
Bricked after Update of New firmware for the Smartwatch 2 to version 1.0.B.3.46/1.0.A.3.8
Hello,
Today Morning my watch updated on it's own I presume to New firmware version (1.0.B.3.46/1.0.A.3.8. ( flashing and the wavy display) after update it felt quite sliugissh so I decided to update using the utility .
The utility indicated new update available but when I tried to update it said failed . After that the watch refuses to turn on .
I have tried following
1. USe the 15-20 sec reset using power button - NO use
2. Tried to update again using the Sony Update utility ( The watch is recognized - it tries to update and then quickly says failed)
3. Charged it for almost 3 hours and tried again - Same result .
Now going by the other messages I have to try following
1. Charge overnight and try again
2. Leave it without power for few days and try again.
Does anybody know some other trick.
I cannot easily return it to Sony as at the moment travelling in Africa
Anil
does anyone found the answer for this issue?
my phone is dead too after the update.
i cant turn it on at all and i did connect with the wallcharger all the night.
Click to expand...
Click to collapse
I sent my watch back to Sony. No answer yet. I will post the results when it will arrive.
Sent from my Nexus 5 using Tapatalk
so severoprisan, how is your sw2? is it repaired? what did they say?
Not yet. It takes 1-3 weeks from January 10th. So I'll wait.
Sent from my GT-N5100 using Tapatalk
Same here
I had the same issue. Called Sony and went through some troubleshooting before they decided it needed to be returned. The support people do not seem to have any idea why this is happening.
Not a great experience with their support people. They promised an RMA and then "forgot" to issue it. It took three calls, but the watch has finally been sent to them. I'm awaiting the refurb now.
update: Got a call from Sony. During the conversation, they mentioned that they do not send out refurbs and that the replacement watch I will receive should be brand new.
update 02/29/14: Received the replacement watch today. Pretty fast turnaround. Now I just hope this one doesn't brick, too.
I had same problem, got this watch on Christmas and after update sth gone wrong and only Flash FS message on screen. Tried everything and no luck. Finally contact Sony and send to SBE (in UK that company services most of mobile phones as manufacture service) and got replacement watch after only... 3 weeks
Sent from my C5303 using Tapatalk 2
Talked to service, they told me that they have 2 SW2's and there is no way to repair them if bricked. So i'm waiting for the replacement watch.
Sent from my Nexus 5 using Tapatalk
Hello friends I just bought Sony Xperia Arc S (LT18i) from eBay after 12 days of using it stopped working
I was using mobile in morning mobile was full charged and after some time it was off I try starting it but it was not starting I look over XDA and tried every thing still no result when I connect it to pc the green led stay on but when I connect it to adapter green light constantly blinks
I tried flashing it using flashtool with original firmware but phone keeps on disconnecting so installation gets aborted.Phone is not even showing Sony logo.
Note:-
1 My phone is not rooted
2 It is not upgraded to ICS
3 I tried everything single thing like taking battery out and holding power button, volume up and power everything
4 Phone is not under warranty
Please confirm me this is not an hardware issue and how to solve it
Thank you everybody for reading it.
Yesterday I got my new Zuk Z2 ,and it worked just fine.I flashed it to Flyme 6.7.7.22R beta and worked just as new.I started to install apps and games and no problem.I played games a hour or to and put it to charge and I did this a couple of times. At night when I grabbed it it was very hot. and I left it to charge overnight.In the morning it doesn't turn on ,no led ,and PC doesn,t see it.Can someone Help me?
P.S. :I don't need the data, all I need is the phone to work.
Thanks
I guess your Chip is dead. You have to disassemble your Phone to repair it
https://zukfans.eu/community/threads/z2-plus-not-charging.1697/
xCocoaCrazy said:
Yesterday I got my new Zuk Z2 ,and it worked just fine.I flashed it to Flyme 6.7.7.22R beta and worked just as new.I started to install apps and games and no problem.I played games a hour or to and put it to charge and I did this a couple of times. At night when I grabbed it it was very hot. and I left it to charge overnight.In the morning it doesn't turn on ,no led ,and PC doesn,t see it.Can someone Help me?
P.S. :I don't need the data, all I need is the phone to work.
Thanks
Click to expand...
Click to collapse
Did u solve the issue? I kinda have the same problem,some thread told me to remove a chip called cx I had one with cz written on it removed it anyway still no vibration,led,logo and pc isn't recognising the phone either. Help