Related
hi,
i need help my GN is not starting after I flashed a theme all i can just get into clock mode recovery even i didn't have any back up or any restore point it just shows google logo when i start. Please helppppppppppppppppppp pleaseeeeeee
thankzzz
now i am stuck on below attachment please help thnkzz so much for all reply till now
since you didn't do a Android your basically screwed so all you data is gone you only hope is to transfer a file through fastboot(can you even do that?) Or boot to Odin mode and flash a stock image
Sent from my Galaxy Nexus using XDA App
GSM or LTE Gnex? What ROM were you running?
Golden rule: Do a backup before doing anything to your phone!
Now all you can do is to download EXACTLY same ROM as you were using by now, wipe cache/dalvik-cache, flash this ROM once again and hope that i'll boot. If it won't you'll have to wipe /data is well.
Sleuth255 said:
GSM or LTE Gnex? What ROM were you running?
Click to expand...
Click to collapse
HI
its gsm i tried to flashed the same rom but still the same only i can access is to recovery
cordell507 said:
since you didn't do a Android your basically screwed so all you data is gone you only hope is to transfer a file through fastboot(can you even do that?) Or boot to Odin mode and flash a stock image
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
tnkz bro but i am new to android please help how to do it with Odin
well since you can boot into recovery try searching in your sdcard folders if youve left a ROM .zip there laying around and if this is the case just flash it and youre back on track
nonione said:
well since you can boot into recovery try searching in your sdcard folders if youve left a ROM .zip there laying around and if this is the case just flash it and youre back on track
Click to expand...
Click to collapse
unfortunatly i delete system file and data file also in recovery i tried to flash the zip update but no result helpppppppppppppppp
salym said:
unfortunatly i delete system file and data file also in recovery i tried to flash the zip update but no result helpppppppppppppppp
Click to expand...
Click to collapse
This will help you get back to stock
http://forum.xda-developers.com/showthread.php?t=1392310
Sent from my GNex {GSM} T-Mobile
Change your spark plugs.
Sent from my Nexus in Texas.
spaceman860 said:
This will help you get back to stock
http://forum.xda-developers.com/showthread.php?t=1392310
Sent from my GNex {GSM} T-Mobile
Click to expand...
Click to collapse
Hi bro i tired with Odin but stops on userdata any help thnkzzzz
salym said:
hi,
i need help my GN is not starting after I flashed a theme all i can just get into clock mode recovery even i didn't have any back up or any restore point it just shows google logo when i start. Please helppppppppppppppppppp pleaseeeeeee
thankzzz
Click to expand...
Click to collapse
i am stuck on this now please help
ouch... softbrick.
put your phone down.
take a deep breath or two.
If you are old enough, grab a beer and relax for a bit. Think calming thoughts.
Now, start learning about how to mod your GNex. We can help.
Here's your First assignment:
find out if you still have a bootloader by booting into fastboot mode. Report back with your findings and a screenshot!
Sleuth255 said:
ouch... softbrick.
put your phone down.
take a deep breath or two.
If you are old enough, grab a beer and relax for a bit. Think calming thoughts.
Now, start learning about how to mod your GNex. We can help.
Here's your First assignment:
find out if you still have a bootloader by booting into fastboot mode. Report back with your findings and a screenshot!
Click to expand...
Click to collapse
Still have a bootloader? Are you serious? You need to learn how to use an android device as well.
To the OP: Do a factory reset in Clockwork and go to mounts
and format /system. Flash the ROM zip. Profit.
Absolutely serious. Have you been reading this thread? The OP needs to start at ground zero and stop just trying every tool he/she sees. My purpose was to get this person to do some research and I was establishing a knowledge baseline. One plan I was considering was to help the OP install the GNex toolkit then locate stock images and obtain a working build. Your cryptic one liner bit should prove vastly more useful to this guy though. I'll let you have at it and go back to my dev work. lol at least this post was a good way to make sure gapps/root capabilities are properly cooked into my latest test build ....
Sent from my Full AOSP on Toro using xda premium
Sleuth255 said:
ouch... softbrick.
put your phone down.
take a deep breath or two.
If you are old enough, grab a beer and relax for a bit. Think calming thoughts.
Now, start learning about how to mod your GNex. We can help.
Here's your First assignment:
find out if you still have a bootloader by booting into fastboot mode. Report back with your findings and a screenshot!
Click to expand...
Click to collapse
U r right i am not good in android but i tried to be and this happens, meanwhile nothing shows after i start the device it shows the !!!! mark with device the PC logo,this happens due to ODin actually the SUMSUNG ADB interface shows ! mark because i cant debug from device even no bootloader works any more thnkz for replying
*facepalm*
OP, you are holding it wrong.
I can think of at least 2 ways to recover from a situation like this. Both are well described in these forums (search works 99% of the time).
....
Oh come on, you don't have the zip of the last rom you flashed, get another one, hey, its free right? **** we dont know nothing about but we'll flash it anyways!
Man...If you have cwm recovery, you're safe. No need to go messing with fastboot (forget odin) just yet. Now stop wasting everybody's time and learn to help yourself.
Here's a few tags to get you started:
cwm, recovery, adb, bootloader, fastboot
bk201doesntexist said:
*facepalm*
OP, you are holding it wrong.
I can think of at least 2 ways to recover from a situation like this. Both are well described in these forums (search works 99% of the time).
....
Oh come on, you don't have the zip of the last rom you flashed, get another one, hey, its free right? **** we dont know nothing about but we'll flash it anyways!
Man...If you have cwm recovery, you're safe. No need to go messing with fastboot (forget odin) just yet. Now stop wasting everybody's time and learn to help yourself.
Here's a few tags to get you started:
cwm, recovery, adb, bootloader, fastboot
Click to expand...
Click to collapse
i tried more than one day on this issue its only starts with !!! mark on it nothing else, i have attached the pic i cant access any bootloader or any cwm or any thing all i did with Odin and stuck to attached pic even i start the device its shows the same pic.
http://www.youtube.com/watch?v=WdM2M8Nz6QQ this I used on Odin
thnkzz
As I suspected earlier, it appears that the OP may have trashed his bootloader partition when he tried using Odin to flash the 4.0.2 factory image (which includes a bootloader). At one point he had CWM but not any more since he can't boot to the recovery partition.
Another possibility is that the Odin tool itself places the device in this mode and it can't be manually reverted by starting up in fastboot mode. Looking at the picture, it literally appears that the phone is saying that a flashing operation is half finished but the phone has lost the PC connection... This would be a lot like what I've experienced with iPhones.
In either case, I can deduce that Odin is the tool to use to clear this softbrick.
Hopefully, it'll be flame-off now Sdobron. Perhaps you might want to help out here since I'm not up to speed on the Odin tool myself and would like to learn more about it.
@salym: I know this may be redundant but I need to establish your problem baseline empirically. Once again, can you verify that when you hold vol down/vol up then press power that you get the image you posted?
Use Fastboot!
Dude, it looks like your problem is with crappy boot sector.
While turning on your phone, hold both volume up and volume down buttons, and long press power button untill you feel single vibrate feedback.
Then connect your phone to the computer via USB, and if it doesn't detect drivers, google "samsung android usb driver". Additionally you can install PDANet application (X64 or x86 depending on you system).
THen download Fastboot - there are plenty of instructions how to flash it, and flash stock images (that come with radio, boot sector, rom itself, etc) - there are also plenty of discussions about how to do it. PM if you have any other questions!
Well, after a series of rooting and trying to get CWM recovery on my Xperia ZL and getting SuperSU I decided it was time to update to CM 10.1.0 RC5 Odin I didn't unlock my bootloader cause I don't know how, to my knowledge of a video I saw online if your phone says that you cannot unlock your bootloader than you can't. So I just thought it was okay to install CM 10.1.0 and did so, now my phone is stuck in infinite reboot without any sort of logo and just stuck at a black screen. I was wondering if any of you guys can help me solve this :\ thanks!
alainmona said:
Well, after a series of rooting and trying to get CWM recovery on my Xperia ZL and getting SuperSU I decided it was time to update to CM 10.1.0 RC5 Odin I didn't unlock my bootloader cause I don't know how, to my knowledge of a video I saw online if your phone says that you cannot unlock your bootloader than you can't. So I just thought it was okay to install CM 10.1.0 and did so, now my phone is stuck in infinite reboot without any sort of logo and just stuck at a black screen. I was wondering if any of you guys can help me solve this :\ thanks!
Click to expand...
Click to collapse
If you can still access CWM Recovery you can try to restore a backup of your old system. Otherwise you will have to flash an FTF using Flashtools.
(You can find the FTF that belongs to your phone here: http://forum.xda-developers.com/forumdisplay.php?f=2094).
If it is your first time using Flashtools you can search here in xda for guides, there are many that explain how to flash a FTF
And, as I said in another post before, every rom that needs to flash a Kernel (CM10.1, PAC, ReVolt, etc) you must have an unlocked bootloader unless it's tagged as a stock based rom.
xkeita said:
If you can still access CWM Recovery you can try to restore a backup of your old system. Otherwise you will have to flash an FTF using Flashtools.
(You can find the FTF that belongs to your phone here: http://forum.xda-developers.com/forumdisplay.php?f=2094).
If it is your first time using Flashtools you can search here in xda for guides, there are many that explain how to flash a FTF
And, as I said in another post before, every rom that needs to flash a Kernel (CM10.1, PAC, ReVolt, etc) you must have an unlocked bootloader unless it's tagged as a stock based rom.
Click to expand...
Click to collapse
I love you so much man, thanks a lot. I'm going to try out a couple of methods to at least restore the phone to 4.1.2. Do you have any advice on how to unlock the bootloader or any roms that doesn't require an unlocked bootloader?
Edit: By the way, I can't access CWM I wish I could, but I tried pressing the hard OFF button on the back of the phone and I tried pressing every button as well, it doesn't connect to my laptop or computer at all. Any way I can connect it to reset it?
alainmona said:
I love you so much man, thanks a lot. I'm going to try out a couple of methods to at least restore the phone to 4.1.2. Do you have any advice on how to unlock the bootloader or any roms that doesn't require an unlocked bootloader?
Click to expand...
Click to collapse
Actually all Stock Roms (Found here: http://forum.xda-developers.com/forumdisplay.php?f=2094) don't require an unlocked bootloader, but if you want to unlock it so you can install Custom Roms (Found here: http://forum.xda-developers.com/forumdisplay.php?f=2095) that are not Stock based here is a very nice Tutorial about how to do the Unlock Bootloader procedure: http://forum.xda-developers.com/showthread.php?t=2153261
alainmona said:
Edit: By the way, I can't access CWM I wish I could, but I tried pressing the hard OFF button on the back of the phone and I tried pressing every button as well, it doesn't connect to my laptop or computer at all. Any way I can connect it to reset it?
Click to expand...
Click to collapse
It doesn't matter, Flashtool will work with the phone in any condition
xkeita said:
Actually all Stock Roms (Found here: http://forum.xda-developers.com/forumdisplay.php?f=2094) don't require an unlocked bootloader, but if you want to unlock it so you can install Custom Roms (Found here: http://forum.xda-developers.com/forumdisplay.php?f=2095) that are not Stock based here is a very nice Tutorial about how to do the Unlock Bootloader procedure: http://forum.xda-developers.com/showthread.php?t=2153261
It doesn't matter, Flashtool will work with the phone in any condition
Click to expand...
Click to collapse
You are the boss man, thanks a bunch I was so worried about my phone. I just got it and was about to unlock it for a company that's super cheaper than all the other phone companies. I'm currently flashbooting it so I can restore it. I will take a peak at the bootloader unlocking procedure and I'm going to thank you again for your help.
Edit: My phone is being recognized in Flashmode only and randomly disconnects and reconnects. I hope I can flash it when the .zip is done downloading. I'll keep you posted.
Edit 2: I'm stuck on FlashTools "Reading Device Information" :\ now I'm stuck at 7% of Flashing Data and it hasn't moved
alainmona said:
You are the boss man, thanks a bunch I was so worried about my phone. I just got it and was about to unlock it for a company that's super cheaper than all the other phone companies. I'm currently flashbooting it so I can restore it. I will take a peak at the bootloader unlocking procedure and I'm going to thank you again for your help.
Edit: My phone is being recognized in Flashmode only and randomly disconnects and reconnects. I hope I can flash it when the .zip is done downloading. I'll keep you posted.
Edit 2: I'm stuck on FlashTools "Reading Device Information" :\ now I'm stuck at 7% of Flashing Data and it hasn't moved
Click to expand...
Click to collapse
Are you flashing a whole .FTF? (The one for my model is about 700+MB)
xkeita said:
Are you flashing a whole .FTF? (The one for my model is about 700+MB)
Click to expand...
Click to collapse
I have the Xperia ZL C6506 I'm using this method(http://forum.xda-developers.com/showthread.php?t=2299092) for my model and it keeps getting stuck at 7% instantly, I don't understand cause I follow his procedure and it won't flash properly still.
alainmona said:
I have the Xperia ZL C6506 I'm using this method(http://forum.xda-developers.com/showthread.php?t=2299092) for my model and it keeps getting stuck at 7% instantly, I don't understand cause I follow his procedure and it won't flash properly still.
Click to expand...
Click to collapse
I would recommend you to flash this FTF first because you need to recover your android system first so you can move files in and out, install recoveries, etc. After doing so you can continue with that rom
xkeita said:
I would recommend you to flash this FTF first because you need to recover your android system first so you can move files in and out, install recoveries, etc. After doing so you can continue with that rom
Click to expand...
Click to collapse
Thank you so much man, I appreciate your help man! I'm going to try this then repost in a bit.
Edit: I ended up finishing the download, now when I try flashing my phone, it just disconnects randomly as well it started flashing but it's stuck at 0% :\ I'll give it some time but if it doesn't move I don't know what else to do
alainmona said:
Thank you so much man, I appreciate your help man! I'm going to try this then repost in a bit.
Edit: I ended up finishing the download, now when I try flashing my phone, it just disconnects randomly as well it started flashing but it's stuck at 0% :\ I'll give it some time but if it doesn't move I don't know what else to do
Click to expand...
Click to collapse
Do a hard reset on it (using the button on the back), don't turn it on and follow the Flashtools flashing process
1.- Open Flashtools
2.- Flash mode > Flashmode > Select the FTF you just downloaded (The one of 700+MB) > Flash
3.- Connect your Phone if Flash mode (It will start flashing).
4.- Boot your phone and you're ready to go.
When selecting the FTF just select it and leave everything as it is and make sure that you have installed the drivers for flashing (
They are where found you installed Flashtools
In a folder called Drivers, open the .exe and Install these:
- Fastboot drivers
- Flashmode drivers
- Xperia Z and SO-02E drivers
If stills doesn't works I can't help any far as that, but I would suggest you that If you are able try to flash it on another computer (It might sound silly but It could actually work ), also make sure that you're running the latest Flashtool which is v0.9.11.0 and can be found here: http://androxyde.github.io/
xkeita said:
Do a hard reset on it (using the button on the back), don't turn it on and follow the Flashtools flashing process
1.- Open Flashtools
2.- Flash mode > Flashmode > Select the FTF you just downloaded (The one of 700+MB) > Flash
3.- Connect your Phone if Flash mode (It will start flashing).
4.- Boot your phone and you're ready to go.
When selecting the FTF just select it and leave everything as it is and make sure that you have installed the drivers for flashing (
They are where found you installed Flashtools
In a folder called Drivers, open the .exe and Install these:
- Fastboot drivers
- Flashmode drivers
- Xperia Z and SO-02E drivers
If stills doesn't works I can't help any far as that, but I would suggest you that If you are able try to flash it on another computer (It might sound silly but It could actually work ), also make sure that you're running the latest Flashtool which is v0.9.11.0 and can be found here: http://androxyde.github.io/
Click to expand...
Click to collapse
Alright perfect, thanks again for all the help! I'm going to try the flash and I'll be back to hopefully say it worked !
I finished flashing it, once I did it told me to unplug my phone and turn it on. It still hasn't turned on but the light has started actually flashing and staying on now compared to before. Hmmmm...
Edit: Nevermind I got it, thank you so much!!! I'm so happy!
close please mods :3
alainmona said:
Alright perfect, thanks again for all the help! I'm going to try the flash and I'll be back to hopefully say it worked !
I finished flashing it, once I did it told me to unplug my phone and turn it on. It still hasn't turned on but the light has started actually flashing and staying on now compared to before. Hmmmm...
Edit: Nevermind I got it, thank you so much!!! I'm so happy!
Click to expand...
Click to collapse
No problem! Keep that .FTF if something like that happens again It might be a life savior.
Thread Solved, mod please close.
Last night I installed geefree on my phone from the app store and used it to install TWRP. I downloaded a nightly CM11 and an appropriate gapps. Using geefree I rebooted to recovery (never figured out the button combination to boot to recovery "naturally") and installed both of the zips. This could be where I made my mistake, I installed both at the same time.
Now my phone loops, displaying the LG logo for a few seconds, then shutting off and rebooting before repeating the process. I can't seem to get it to go into download mode or the recovery menu. I've tried power+up, power+down, down+up and each of those while plugging the device in, etc. I can get the device to a hardware key control mode, though it doesn't seem too useful.
How can I save my phone? This forum has been a great resource in the past and I'm very grateful for the many tutorials I've followed rooting other devices. Hopefully you guys can save the day once again!
Volume up plus power is how to access recovery on sprint.
What stock sw version were you on before you flashed cm?
Did you wipe data before flashing?
Sent from my LG-LS970 using xda app-developers app
I was using stock 4.2.2, I believe. I didn't wipe the data (shame on me), a bad habit that I picked up from my first rooted device, the Samsung Moment. It didn't ever matter on that one, afaik. Thanks for the reply!
Edit: Volume up and power whether plugged in or not takes me to the hardware key control mode screen.
Second Edit: http://forum.xda-developers.com/showthread.php?t=2432476&page=35 I also found this thread where someone seems to be experiencing similar issues and they fix it with "LG Utility." Is that a PC application? It's a little vague to google, but I've been trying!
I have a bootloop issue every time i flash a rom i have to wipe all but sd flash roms and gapps the i do a restore from twrp and oly restore my boot image only and they boot no prob
I'm kind of starting to suspect my power button doesn't work at all for whatever reason. I have a lot of difficulty getting the phone to shut down, then it doesn't seem to easily power up. It's a strange collection of problems. Would a Sprint repair place be able to fix this?
If they have parts on hand if not either a swap out or a sendoff
Same problem here - bootloop and no download mode - CWM works! - urgently need help
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Device is recognized but can´t be mounted - bricked forever?
Parinibbana said:
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Click to expand...
Click to collapse
I tried a few things on Linux.
After terminal-command "ls /dev/sd*" when the device is unplugged from the computer I get "/dev/sda".
When the device is connected via USB, I get: "/dev/sda /dev/sdb"
So sdb is my LG G2.
So I went on to the next command: "gdisk -l /dev/sdb"
As a result I get: "Problem opening /dev/sdb for reading! Error is 123."
Does it mean that the phone isn´t mounted or what? Now I´ve connected my phone to another Linux machine with the same result. It is recognised (p.e. as sdd), but there is no sdd1. Seems as if it is recognized, but can´t be mounted. Does that mean my device is bricked for good? That´s it?
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb into the phone first then hold VOL+ and plug into usb port on the computer.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, it will shut off eventually!!
plug the phone in while in download mode to install drivers and set com ports, then unplug before you begin your flash with LGFlashTool, hope this helps you out.
Cronic2009 said:
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb in first then hold VOL+ and plug into usb port.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, hope this helps
Click to expand...
Click to collapse
Thanks Cronic2009 for your advice.
There are, however, szenarios where download-mode is not accessible any more. Neither by using the hardware-keys, nor by using the adb-command.
After four days of resarch and a lot of trial and error, I finally unbricked my F320L using the two adb-commands outlined at the beginning of that thread: http://forum.xda-developers.com/showthread.php?t=2451696
Worked like a charm.
Thanks everyone for your advice.
no problem buddy, glad you got it figured out, good luck to you from here on out!
FYI, that link doesn't work
I just wanted to ask anyone who might know, since the bootloader of the LS980 is locked, we cannot "break" this correct, so no matter what commands we decide to run through root, we cant touch the true bootloader there for LS980 fail safe? (Besides Acts of God, EMP, ect)
Cronic2009 said:
no problem buddy, glad you got it figured out, good luck to you from here on out!
Click to expand...
Click to collapse
Thanks for letting me know. I corrected the link in my previous post.
Be sure if you use a aosp based rom to flash the ZV8 modem. Your can use dr87 or furnance kernals after you flash the zva modem althought i have encountered soft brick due to this.
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
pitbullmommy45245 said:
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
Click to expand...
Click to collapse
Thank You for sharing you fixed your issue pittbullmommy but the link you posted points back to a post about a failed run on LGFlashTool, will you please fix the link and point it to the post/guide you used to fix your phone, it may help others stuck in a similar situation, glad to hear you got it fixed and working, best of luck with it from here on out!
Hi all
was just about to start a new thread but didn't want to get into trouble..anyway I am in need of some assistance please.my ls980 has been bricked for some time now been searching all over the internet for a solution to be stuck back at square one.found this video on youtube which is pretty much exactly what my phone is doing.I have used lg flash tool to revert to stock and still nothing I lost root doing that but last night,I managed to regain root access I have no idea how but it happened when i clicked ioroot batch file i went into download mode and it stated bottom left ROOTED in red so i managed that but that is it still doing what is being shown in the video its on youtube
watch?v=PjLF-pBhZSY
please if anyone has the know how I would like to fix this phone rather then bin it thank you all happy 4th everyone
After using tot and flash tool to get back to stock, did you try going into stock recovery and do a factory data reset? I know it sounds stupid especially after a tot but try it. Couldn't hurt
Sent from my LG-LS980 using Tapatalk
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Yes sir I've tried that and more to no avail is there anything I can do through adb I'm on stock recovery phone doesn't stay on long enough to install anything
sarfdawg said:
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Click to expand...
Click to collapse
You ever get her fixed?
Hello.
Recently I've tried to get myself a new ROM. I've decided to choose this one:
http://forum.xda-developers.com/showthread.php?t=2685822
Everything was going just fine. I unlocked bootloader, flashed device, accesed CWM menu, did all the wipes but the dalvik cache one and then my device kinda re-connected through the usb (you know, the sound windows makes when you disconnect and connect device). I had no idea what happened and from that point I can no longer acces my phone. It's stuck at Pac Rom logo. The phone only responds when i turn it on in fastboot mode (power + volume up button). Then a blue led lights up.
Have I really just bricked my phone beyond repair? Could anyone help me?
Revaey said:
Hello.
Recently I've tried to get myself a new ROM. I've decided to choose this one:
http://forum.xda-developers.com/showthread.php?t=2685822
Everything was going just fine. I unlocked bootloader, flashed device, accesed CWM menu, did all the wipes but the dalvik cache one and then my device kinda re-connected through the usb (you know, the sound windows makes when you disconnect and connect device). I had no idea what happened and from that point I can no longer acces my phone. It's stuck at Pac Rom logo. The phone only responds when i turn it on in fastboot mode (power + volume up button). Then a blue led lights up.
Have I really just bricked my phone beyond repair? Could anyone help me?
Click to expand...
Click to collapse
You didn't brick your phone, the latest version isn't working for me too.
Bornon17th said:
You didn't brick your phone, the latest version isn't working for me too.
Click to expand...
Click to collapse
What a relief. But is there any way I can, well unbootloop my phone? In case someone asks, I've already looked through the forums and all the advices were connected to people who can, in fact, acces CWM Recovery menu. My phone is not being recognized by flashtool.
Revaey said:
What a relief. But is there any way I can, well unbootloop my phone? In case someone asks, I've already looked through the forums and all the advices were connected to people who can, in fact, acces CWM Recovery menu. My phone is not being recognized by flashtool.
Click to expand...
Click to collapse
Did you have back up of your current ROM or any other ROM or its zip file ?
Bornon17th said:
Did you have back up of your current ROM or any other ROM or its zip file ?
Click to expand...
Click to collapse
I didn't have any custom ROMs before. This was my first attempt at customizing my phone. The only thing I've done is
followed instructions in this http://forum.xda-developers.com/showthread.php?t=2327473 thread after upgrading my phone to 6.2.B.1.96 Firmware. Then I unlocked bootloader and tried to flash Pac Rom. What should I do?
And one more thing, thank you for such a quick respond.
Revaey said:
I didn't have any custom ROMs before. This was my first attempt at customizing my phone. The only thing I've done is
followed instructions in this http://forum.xda-developers.com/showthread.php?t=2327473 thread after upgrading my phone to 6.2.B.1.96 Firmware. Then I unlocked bootloader and tried to flash Pac Rom. What should I do?
And one more thing, thank you for such a quick respond.
Click to expand...
Click to collapse
Flash stock ROM via flashtools.
my phone dosn't turn on it just flashes the Samsung when i boot it up. i need help dont know what to do
help please
epiczsniperz said:
my phone dosn't turn on it just flashes the Samsung when i boot it up. i need help dont know what to do
help please
Click to expand...
Click to collapse
Boot it holding the volume up button. This should get you into so-called "recovery" where you can, among other things, restore it to defaults.
If recovery also doesn't work (which would be unusual), boot it holding volume DOWN button. This will get you into a "download" mode where you can use ODIN to flash new recovery (such as CWM recovery which is very nice and powerful), or even flash entire firmware from scratch.
Good luck, let us know how it goes ~
[edit] oh and do all that while having it connected to USB power, in case the battery is empty.
still doesnt work
sysKin said:
Boot it holding the volume up button. This should get you into so-called "recovery" where you can, among other things, restore it to defaults.
If recovery also doesn't work (which would be unusual), boot it holding volume DOWN button. This will get you into a "download" mode where you can use ODIN to flash new recovery (such as CWM recovery which is very nice and powerful), or even flash entire firmware from scratch.
Good luck, let us know how it goes ~
[edit] oh and do all that while having it connected to USB power, in case the battery is empty.
Click to expand...
Click to collapse
I tried both methods. Is my phone fixable. I messed it up somehow with Odin and I might have deleqted the software can I reinstall it onto my phone help please
Help!!!!
epiczsniperz said:
I tried both methods. Is my phone fixable. I messed it up somehow with Odin and I might have deleqted the software can I reinstall it onto my phone help please
Click to expand...
Click to collapse
I have the same problem , did you advance it? thx
help
cellsan said:
I have the same problem , did you advance it? thx
Click to expand...
Click to collapse
i couldnt fix it none of the steps worked. what about you?
epiczsniperz said:
I tried both methods
Click to expand...
Click to collapse
Could you clarify what happens when you do those methods exactly?
I think the download mode should basically always work...
[edit] oh wait, I think I mislead you by accident (sorry!). You should boot while holding HOME and volume up (recovery) or down (download).
stilll nothing
sysKin said:
Could you clarify what happens when you do those methods exactly?
I think the download mode should basically always work...
[edit] oh wait, I think I mislead you by accident (sorry!). You should boot while holding HOME and volume up (recovery) or down (download).
Click to expand...
Click to collapse
I notice no changes when I did them methods my phone still doesnt turn on
still nothing
I downloaded recovery clockwork and installed . On oden it said pasd but now I cant access recovery booting either
epiczsniperz said:
I downloaded recovery clockwork and installed . On oden it said pasd but now I cant access recovery booting either
Click to expand...
Click to collapse
Anything doesn't work , When I boot while holding HOME and volume up (recovery) appears the blue advice in the upper left corner and about 2 segs after the cellphone restart again, again and so on, When I boot with the down (download) the process on kies working good but when ends the cellphone restart again, again and so on. I'm start to think that something in the hardware is damage :crying:
looks like you messed something up there...
Anyway, if your phone is rooted, and/or you don't care about warranty you can get it in download mode (you said it works fine with kies until reset, so I suppose it means that download mode is at least accessible).
And after that use Odin to reinstall the stock rom completely.
Or, again with Odin install custom recovery, and then whatever ROM you like.
While working with odin, be sure to stick to the guides here on XDA. (for a custom recovery see: http://forum.xda-developers.com/showthread.php?t=2364980)
smartxdev said:
looks like you messed something up there...
Anyway, if your phone is rooted, and/or you don't care about warranty you can get it in download mode (you said it works fine with kies until reset, so I suppose it means that download mode is at least accessible).
And after that use Odin to reinstall the stock rom completely.
Or, again with Odin install custom recovery, and then whatever ROM you like.
While working with odin, be sure to stick to the guides here on XDA. (for a custom recovery see: http://forum.xda-developers.com/showthread.php?t=2364980)
Click to expand...
Click to collapse
I have the custom stock but it still wont boot up
epiczsniperz said:
I have the custom stock but it still wont boot up
Click to expand...
Click to collapse
If you're not entirely stock you'll have trouble using Kies.
I myself had trouble when tried to revert to stock ROM from CM.
It failed to restore NANDroid backup every time, and I also didn't succeed in flashing the stock image with Odin as well.
In the end, I succeeded with this ROM (which is modified stock TW), usin ODIN. You can try this, just read and understand the instructions in the thread before you do anything.
Ironically, after a couple of days after reverting to stock rom I was so annoyed by the speed decrease compared to CM, that I reinstalled CyanogenMod back, found TouchWiz stuff I missed via separate apps, and I'm pretty happy with it ever since.
Bottom Line: anyways, if you already on custom stuff with altered warranty, you must get custom recovery working first, then it will be simple.