[Q] My s3's motherboard fried? - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Last week,before going to sleep, I put my s3 phone to charge before going to class. When i woke up in the morning i knew something was wrong because my alarm never rang.
Because i live in india now, I first called samsung and they told me I would have to pay 70$ just to ship it to texas center and then have to pay whatever the cost is to fix the problem.
Naturally, I took it to a mobile repair shop down the road. They first said my phone had some boot problem. After a week they said nothing could be done and that the motherboard is fried.
Here are the problems.. When i woke up, the phone was off and the charging light wasnt even showing. I kept trying to turn thr phone on and it tuened on once all the way to the samsung logo and sound and then shut off again. After that, it hasnt turned on since. Boot menu doesnr work. Download menu also doesnt work.
It doesnt turn on but the charging light shows uo when i insert thr charging cable.
What do you guys think? What should i do? Is my motherboard really fried? Should i try to find a new motherboard on amazon and try setting it up myself? I dont think my warranty is still active with at&t if that makes any difference.
Looking forward to any help,thanks.

Plug into a computer and check device manager. If it says qhsusb_dload or something similar it may just be bricked. If so try the debrick method in this section. Worth a shot before spending money on it.
Sent from my SAMSUNG-SGH-T999 using Tapatalk

DocHoliday77 said:
Plug into a computer and check device manager. If it says qhsusb_dload or something similar it may just be bricked. If so try the debrick method in this section. Worth a shot before spending money on it.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
Click to expand...
Click to collapse
After I plug into the computer..nothing happens.
Ill try again after i get home.
The phone is rooted. Though i havnt updated it in a very long time.
Also i should mention that sometimes the red charging light comes on and sometimes it doesnt. Also when i connected it to a different computer it showed a message rhat something failed to download.

Which charging adapter did you use? Was it the stock samsung adapter or an aftermarket one?

so after plugging in the phone to the computer, I tried to look for anything in the device manager, however have come up empty handed.
So, its safe to assume, its not bricked (as that is semi-reversible).
And that the phone is most likely motherboard fried...which sucks and means I have to get a new phone.
Is there anyway to extract the information from internal storage? like documents and pdfs and possibly notes? Or is that option not available aswell?

I am thinking it is a hardware failure at this point. I would say to check the USB port as those to tend to get damaged sometimes, but you took it to a shop already and they should've noticed it if that were the case. These devices are getting old though, and I've been seeing more and more hw failures lately, so considering all that you said in the op, what the shop told you and what has been discussed here I am thinking that will be the most likely conclusion.
As for getting your data back, I kind of doubt it will be possible. If a shop can't get to it with special equipment and programs, you won't be able to do much more on your own. If its very important/valuable data, you could always try a professional data recovery service, but you're probably going to pay a good bit for that.
I am sorry that this happened and that I can't be any better help to you. Good luck with whatever you decide to do. And feel free to ask for a second opinion. Its always possible I could've overlooked something.
Sent from my SAMSUNG-SGH-T999 using Tapatalk

Have you tried a fully charged different battery. You're USB port could be bad not allowing your battery to charge or connect to the computer. If this is the case, your battery didn't charge and went dead during the night and it also may not be getting power from the computer when plugged in. With another battery you might power up and retrieve your data.

S3 motherboard replacement
Hi guys,
I hope somebody here can be of any help. my i9300 (s3) got fried while charging last month. while i was planning to dispose the phone. due i cannot use it anymore and i bought one for good which currently in use, my co-worker just broke the screen of His phone too (s3), fortunately,he agreed to give me his and ask a friend of mine to replaced the motherboard on my s3 with the one from my co-workers phone. the replacement proceeded successfully but upon testing any sim card does not work. it display it has a coverage bar signal, but the notification on top says no sim card.
anybody who would share a thought about what will be the solution is much appreciated!
thanks in Advance

Related

[q] super bricked!

I've been rooting and working with custom roms for a long time (couple of years at least). I started with WinMo, and since I got my Evo the day they came out, I've been doing it in Android. I can also use ADB, and can typically recover from pretty much any problem on my Evo. (not claiming to be an expert) HOWEVER...
A couple days ago I loaded the latest Fresh ROM on my phone, and ran out the door while it was loading. Got in my car, the Evo started to reboot after applying the ROM, and zzzZZZIP! The thing went dead. And I mean REAL DEAD. The led which usually shows the charge level as not lit. I pulled the battery and tried to turn it on after replacing it. No go. Nothing when holding down vol while pressing power... nothing. When I got home I tried a wall charger, still no light, no boot, no drive with !, nothing. When the wife got home, tried her Evo's battery... same kind of nothing. USB connection to PC gives no adb access, no fastboot access,... you guessed it, nothing.
Sprint doesn't replace it if you didn't buy the warranty. Called HTC, of course they'll happily replace it, as long as it wasn't rooted. So I have a two part question.
Firstly, because I want my Evo back NOW! No, two days ago! LOL Is there a way to fix it?
Second, if I send it in, is there a way for them to know I rooted it?
Your help would be greatly appreciated.
Have you tried a different battery? That one may be fried. Just a suggestion.
Sent from my PC36100 using XDA App
fdb8231 said:
Have you tried a different battery? That one may be fried. Just a suggestion.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Thanks for the quick response! Yep, tried that. I thought maybe I had one of the USB port issues that didn't allow me to charge the phone, but alas, my wife's fully charged battery couldn't boot it (or do anything), and my battery worked fine in her Evo.
I also disassembled the phone to check solder connections both on the battery connector and the usb port... both looked totally fine.
Well, if you pay insurance on it you could always accidentally lose it and report it lost or stolen.... that's what I would do, but that's just me....
___________________________________
Yup.... The ones yoe momma told ya about.... Bad Seed Customs!!
Yeah, I'll weigh my options. I think I'll send it to HTC first. I really don't think they can read the internal memory in this condition. I think it is probably fried. It is too late for the Sprint TPE (warranty), but but I might be able to finagle a squaretrade warranty. It will take time though. I thought about having a friend list it in eBay as a buy it now for what a new one costs, buy it from him (he give me my money back), and wait whatever period squaretrade requires, and file a claim. They're great, and I should have bought a squaretrade warranty from day 1. I've had it on the two phones prior and had to use it on one of them. They're easy to deal with and cheaper than any other options. Plus, its more flexible since they don't replace the phone, they issue you a refund for it (which would give me the option of switching phones, not that I would).
mrsato said:
I've been rooting and working with custom roms for a long time (couple of years at least). I started with WinMo, and since I got my Evo the day they came out, I've been doing it in Android. I can also use ADB, and can typically recover from pretty much any problem on my Evo. (not claiming to be an expert) HOWEVER...
A couple days ago I loaded the latest Fresh ROM on my phone, and ran out the door while it was loading. Got in my car, the Evo started to reboot after applying the ROM, and zzzZZZIP! The thing went dead. And I mean REAL DEAD. The led which usually shows the charge level as not lit. I pulled the battery and tried to turn it on after replacing it. No go. Nothing when holding down vol while pressing power... nothing. When I got home I tried a wall charger, still no light, no boot, no drive with !, nothing. When the wife got home, tried her Evo's battery... same kind of nothing. USB connection to PC gives no adb access, no fastboot access,... you guessed it, nothing.
Sprint doesn't replace it if you didn't buy the warranty. Called HTC, of course they'll happily replace it, as long as it wasn't rooted. So I have a two part question.
Firstly, because I want my Evo back NOW! No, two days ago! LOL Is there a way to fix it?
Second, if I send it in, is there a way for them to know I rooted it?
Your help would be greatly appreciated.
Click to expand...
Click to collapse
Are you certain the battery isn't fried? Also, make sure the SD card is fully seated and secure. With the battery OUT, connect your EVO to it's power supply and then reinsert the battery. Sometimes, after doing so, you will see the LED light up. If not, try again. If it still does not, try getting to the Hboot screen by pressing the down volume button while also pressing the power button.
I am pretty sure I tried that. I pulled battery while plugged in, put battery back, no difference. The first thing I thought was that it was a bad battery connection, because the phone has never worked with the battery out, but plugged in. The battery MUST be in to work. So I disassembled it to check the battery and USB connection solder points, and they look fine.
I called a reputable mobile phone tech and he said he has seen this a few times with rooted Android devices. He said he doesn't think they will be able to read the internal memory, or probably won't go through the effort it would require to (pull the internal memory out and put it in a reader).
Just pull all your root files off the SD card cause that is a dead give away that it is rooted.
Sent from my PC36100 using XDA App
Insurance
Going through HTC is going to be a waste of time. Their turn around time is 30 days... And thats if they dont discover the rooting and therefore actually replace it.
Your best bet is sucking it up and paying the $100 deductible for Asurion insurance... If you order on their website www.phoneclaim.com they will overnight for free. However I have heard of it being back-ordered, in which case you will either wait, or be one of the lucky guys who gets a brand new one.
In regards to them seeing your internal memory, I would say its 50/50. They can recover that sort of stuff, but at the same time, HTC is way more lenient with rooting/mods than other manufacturers.
Good luck
toddlmr said:
Just pull all your root files off the SD card cause that is a dead give away that it is rooted.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
As it turns out, when you send your phone to HTC, you have to pull your battery cover, battery, microSD card, and any other "accessories" you have off, and keep them. They only want the phone without any of these items. I asked the guy, "you don't want me to ship the batter OR even the cover with the phone, but separate?" He said, "no, they are yours to keep. if you send them to us, they will not be returned." LOL! If they replace the phone, I'll have spare parts! Yaaay! I left my screen protector on it, in case they can fix it, they won't scratch it. Love my Evo y'all!
Yah the same exact thing happened to me when i first got my evo (the first day it came out). Absolutely no sign of life, but got it through best buy and just went back with no insurance or anything and she gave me another one on the spot.
Yeah if it won't even power, they won't bother. You are straight unless by some miracle they actually get it working.
TEP is a godsend.
I'm supremely surprised no one has popped in to say "WRONG SECTION AMAGADWTFBBQ!"
sekigah84 said:
I'm supremely surprised no one has popped in to say "WRONG SECTION AMAGADWTFBBQ!"
Click to expand...
Click to collapse
That would be so barbaric and elementary - so many capitals and so much hostility!
To the OP:
Wrong section, jackhole.
It will probably cost you $35 without the insurance. If one store doesn't work, try another.
Yeah, just smash it on the floor and claim a new one
$100.00 ..thats it.
Where to post this?
I had a feeling this was the wrong place to post this, but not sure where else to do it. General maybe?
SORRY! ;-P
I wouldn't have a problem if an admin moved it to the right place.
Do did you make a decision to send it in?
teh roxxorz said:
Do did you make a decision to send it in?
Click to expand...
Click to collapse
Yeah, with fingers and toes crossed.
Well, I don't think they'll find out. Cuz I'm in engineering, and they could try to overvolt the phone [in an attempt to turn it on] but too much a risk of frying the circuits. Also no sdcard so they can't see your files...and way too much work to disassemble...so I think you're good.
Thanks man, that really is reassuring. I'm kind of on pins and needles over this. I can't afford ANYTHING, much less to buy another phone (I was laid off Jan 1).
I've been desperately trying to learn to program in Java, for Android. Both should provide me with more flexibility financially. I'd rather work as a contractor than FTE any day, but sysadmin type work is hard to find these days. I didn't expect to enjoy programming as much as I am, which is a pleasant surprise. Java isn't so hard. ;-)
I hope to get my Evo replaced under warranty. Then I hope to get more income by the time the new Evo 3D comes out! Not to sideline this thread, but what do you guys think of that thing? I'm also wondering if the new Evo View 4G would work as a phone replacement, just using Google Voice to replace cell service. Most new cars have bluetooth built in, and otherwise can use a bt headset (even stereo headphone type), so you never have to hold it to your head anyway.
Sorry, I guess I spaced posting my results. The did not know out had been rooted. They just replaced the motherboard and sent out back.
Unfortunately, they downgraded me from hw version 003 to 002. There were also two soft key lights out and I sent it back. Even though I complained about the version difference they still put another v2 in it. I called US public relations and came close to getting a hwy v3 board in but in the end it didn't happen. All they really care is that they made the device work.
Moral of the story is, if your Evo is dead-dead, send it to htc, and now you know what to expect.

nexus not charging

i know it is already posted but my issue is different. Some can charge their phone when it is off but mine cant charge even if its off.
When its off and i plug the charger the lightning logo appears, it indicates that its charging but when i turn it on the percentage of the battery remained the same. it didnt charge at all. Also my pc does not recognize my phone whether if its off or on.
i tried with no luck changing rom, kernel, used different cables and chargers (i even used one from LG).
i want to take it back to samsung but my bootloader is unlocked, im using costume rom, and rooted. They will not accept or repair it
EDIT: i want to install the stock rom and relock bootloader but how? since my pc doesnt connect to my phone
Look in the development section and download the nexus toolkit.
Sent from my Galaxy Nexus using xda app-developers app
ticholas said:
Look in the development section and download the nexus toolkit.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
How can i use it if my pc can't recognize my phone? Driver is already installed and it was working before
Sent from my Galaxy Nexus using xda app-developers app
Use a cocktail stick and try push the chipinside your phone slot upwards a little (if the phone were laid faceup on a table). Be delicate as you dont want to force it, but a little nudge up and your problems should aaaaall be resolved.
ive already done that no luck.
bump!
if i can restore my phone to stock recovery, stock rom, stock kernel, remove root will they accept it(warranty)? or do they have something to know that i modified my phone?
EDIT: because im planning to return in back to samsung
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thanks
FNM
Is it a play store model or international? If it is international and you are located in the USA, Samsung will not do it. You can replace the usb port yourself..
mine too
Mine did the exact same thing. Good luck sending it in and having them actually fix it. I'm beginning to think their tech guys are really just a room full of chimps randomly putting stuff together.
I told them exactly what the problem was (because I looked it up before sending it in and my problem was the exact same as everyone else's) and they ignored me and just switched out the battery. That didn't work, so I sent it back again. Then, they updated the software. Since it's a hardware issue, obviously that did nothing. Now, they have repaired the PBA. I don't know what a PBA is or what it has to do with my USB port, but I'm betting the issue still will not be fixed and I'll have to send it back, yet again. After all this mess, I think I'm done with Samsung entirely.
turtlemama said:
Mine did the exact same thing. Good luck sending it in and having them actually fix it. I'm beginning to think their tech guys are really just a room full of chimps randomly putting stuff together.
I told them exactly what the problem was (because I looked it up before sending it in and my problem was the exact same as everyone else's) and they ignored me and just switched out the battery. That didn't work, so I sent it back again. Then, they updated the software. Since it's a hardware issue, obviously that did nothing. Now, they have repaired the PBA. I don't know what a PBA is or what it has to do with my USB port, but I'm betting the issue still will not be fixed and I'll have to send it back, yet again. After all this mess, I think I'm done with Samsung entirely.
Click to expand...
Click to collapse
i have sent it already. fortunately i was able to return to stock without USB. Hope they cant detect that ive done a mess on my phone.
probably the repair shop where you took your phone are just too lazy to repair. I hope they wont do the mess they did to you but i think it depends on tech guys if they are lazy enough to repair.
lowandbehold said:
Is it a play store model or international? If it is international and you are located in the USA, Samsung will not do it. You can replace the usb port yourself..
Click to expand...
Click to collapse
it is international and im in Italy. i took it back to the shop where ive bought and they'ce accepted it. The problem is that this shop will send my phone to samsung and i afraid that they will call me and ask me if i did something that voids my warranty
silverhunk said:
i have sent it already. fortunately i was able to return to stock without USB. Hope they cant detect that ive done a mess on my phone.
probably the repair shop where you took your phone are just too lazy to repair. I hope they wont do the mess they did to you but i think it depends on tech guys if they are lazy enough to repair.
it is international and im in Italy. i took it back to the shop where ive bought and they'ce accepted it. The problem is that this shop will send my phone to samsung and i afraid that they will call me and ask me if i did something that voids my warranty
Click to expand...
Click to collapse
Did you get it fixed?
This is kind of what my phone is doing too (here's the thread i've made)
http://forum.xda-developers.com/showthread.php?t=2059289
It will charge, but only to a certain point, regardless of rom, kernel, on or off, etc
over the past few days the maximum charge has gone down and down. Now it only charges to a max of 82%. I have 2 batteries and it does the same thing on each. My (hopeful) solution is that i bought an external wall battery charger and will charge batteries that way. I have the verizon model so if i wanted to do some sort of warranty work i'd probably have to go through them (not even sure if im still covered). I really dont want to deal with it. It boggles my mind why my phone is doing this though, charges fine but not to full. Oh well c'est la vie.
cymru said:
Use a cocktail stick and try push the chipinside your phone slot upwards a little (if the phone were laid faceup on a table). Be delicate as you dont want to force it, but a little nudge up and your problems should aaaaall be resolved.
Click to expand...
Click to collapse
i wouldnt recommend that to people, for me it went from a phone with "phantom charging" (ie flashing on and off for charging) and issues charging to a short circuit on the usb connection, so that the phone switches off when a usb cable is plugged in. What is well worth trying first is simply giving the port a good clean, a little bit of alcohol and that same cocktail stick may well solve your issue. I've been left charging via a chopped up usb cable to the dock connectors.
i dont doubt that forcing the tab in the port may have worked for you, but it has failed badly for others (ie me), so just be careful suggesting it
I had a similar problem as my micro usb socket was damaged. Don't worry about sending it for repair, do it yourself. The circuit board with a new micro usb socket is available on ebay, I paid £5 for mine. Watch a tear-down video or 2 on youtube and you will be sorted.
The GNex is easy to take apart requiring just a small philips head screwdriver and a pry tool, i used a guitar pik, and these are also available on ebay for just a few ££'s.
Can do the whole job in 15 minutes.

[Q] Sudden Hardbrick

My phone hardbricked for no apparent reason, and I'm not sure what to do. Battery was at about 50% yesterday, it turned off and wouldn't turn back on. I did a soft reset, and it turned on. I watched it go as far as the logo and then had to walk away. When I came back, the phone was black again. And it hasn't turned on since. No logo, nothing. I've tried a soft reset, plus multiple other reset combinations. I plugged my phone to the computer, I get the normal connecting 'ding', but then it says that driver's device cannot be found.
I'm running stock firmware, no mods. No history of battery issues (except the normal slow decline). I've had the phone for a year and three weeks, so I'm out of warranty too. I called T-mobile and they said it sounds like a hardbrick and are willing to switch it out for $20 since I'm out of warranty. I can't do that since I'm out of the country for the next 1.5 months, so I was wondering if anyone out there had any suggestions on what to do or why this even happened?
Thanks!
goeundiane said:
My phone hardbricked for no apparent reason, and I'm not sure what to do. Battery was at about 50% yesterday, it turned off and wouldn't turn back on. I did a soft reset, and it turned on. I watched it go as far as the logo and then had to walk away. When I came back, the phone was black again. And it hasn't turned on since. No logo, nothing. I've tried a soft reset, plus multiple other reset combinations. I plugged my phone to the computer, I get the normal connecting 'ding', but then it says that driver's device cannot be found.
I'm running stock firmware, no mods. No history of battery issues (except the normal slow decline). I've had the phone for a year and three weeks, so I'm out of warranty too. I called T-mobile and they said it sounds like a hardbrick and are willing to switch it out for $20 since I'm out of warranty. I can't do that since I'm out of the country for the next 1.5 months, so I was wondering if anyone out there had any suggestions on what to do or why this even happened?
Thanks!
Click to expand...
Click to collapse
does it respond to plugging in to charge? im not 100% but if its responding at all when it gets plugged in its not hardbricked only softbricked so go from there. when i hardbricked my first s2 due to a corrupt kernel file i flashed it would not react to anything at all. complete dead weight
U stated that when u plugged it into ur computer u got a ding then says driver device not found. Sounds to me that ur not in a hard birck when I bricked mine I didn't even get that. Check out the link it well help.
http://galaxys2root.com/t-mobile-ga...ck-t-mobile-galaxy-s2-sgh-t989-android-2-3-6/
on my t989 enjoying sith3, thank u to all
Thanks for everyone's help. I ended up sending in my phone to a Samsung service center (while I was in Korea). They confirmed that it is a hardbrick. They opened it up and said it looked like there was a short and it fried the motherboard. They couldn't tell me what caused the short--they said maybe some water got into the phone through the charging port, but I know that isn't true... I had it plugged into an old power strip and maybe that's why? :crying:
Either way, I was told my only option was to get the motherboard replaced which would be $200. I told them no thanks and that I'd just get a replacement phone from T-mobile for $20.
sounds like another " I swear i didn't do anything.. it just happened" story.. classic..
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
PJcastaldo said:
sounds like another " I swear i didn't do anything.. it just happened" story.. classic..
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I know my story sounds unlikely, but it's the truth. Isn't this forum around to help fellow users? I have no reason to lie here. I actually take very good care of my phone and (after almost losing a laptop to a water spill) am extremely cautious about liquids around my electronic devices. You don't have to believe me since I'll get my phone replaced regardless. I just thought I would share the information in case someone else ends up facing the same problem.
Even now, the only cause I can come up with still is the old power strip frying the motherboard. *shrug* I would love to hear any other explanations.

[Q] Hard Bricked, possibly hardware?

Hey guys,
I've been having issues for the past month or so with random reboots while using the phone followed by boot loops requiring a battery pull to get it to work again. At first I thought it was a software issue, so I returned to stock, which didn't help, and then installed a few other roms. I'm 99% sure it is a hardware failure, as now the phone is completely dead. It was fine when I went to bed, and in the morning it showed no signs of power (or heat). I tried 2 different batteries and 3 chargers, so I'm pretty sure it's toast. It does not show up in the device manager so I can't odin or KIES recover to stock, or do anything else with it for that matter. Download mode doesn't work, and the phone is literally a useless hunk of plastic.
Having said that, I am getting a replacement phone. What I'm concerned about is if the storage on the phone will be examined upon receipt by either T-Mo or Samsung. I was using CM10 when it went dark, however because it was working (with the random reboots still) the night before I'm pretty sure it's not a flashing issue (as it worked fine after the flash, well as fine as a phone does that randomly reboots).
Do they have the capability to remove the storage from the phone and check it against something else? Is there a way to wipe it without being able to odin/power it on?
Am I over thinking this? Will they just send it back to samsung who will test the power, then pitch the phone?
Is there anything else I should try to do to fix it?
Thanks for your time.
You could by a USB download mode jig for like $5 to see if it can get you into download mode. I wouldn't worry about the storage too much.
If it's completely bricked (like can't even get the bootloader to pick up), not charging, and still under warranty, odds are they will just replace it without wasting too much time on it.
Would the download jig do anything better than just plugging it into the computer with the buttons down? I didn't flash a bad kernel or anything like that (as in it booted and rebooted a few times without new issues) and it was a sgh-t989 kernel (which I used the buttons to get into recovery with).
I do have the replacement on the way, as it's my work phone too so I really need it next week. If the general consensus is not to worry about it I may just leave it. The water indicator isn't pink so I'm in good shape, and if they see it's bad and it's not worth the time to repair I doubt they would audit it/do additional tests.
Also, on the plus side I had 1 tiny microscratch in the year I've had the phone and it would fill with finger oils (really only obnoxious on white backgrounds). Here's to a scratch free screen!
richardlibeau said:
You could by a USB download mode jig for like $5 to see if it can get you into download mode. I wouldn't worry about the storage too much.
Click to expand...
Click to collapse
I have a question my phone is hardbricked and won't charge or access bootloader. I have no insurance what are my options? I'd appreciate your expertise. Thanks
CottonCreeper said:
I have a question my phone is hardbricked and won't charge or access bootloader. I have no insurance what are my options? I'd appreciate your expertise. Thanks
Click to expand...
Click to collapse
Are you sure your phone does not charge or it just doesn't simply turn on? Try testing your battery, maybe if a friend has a similar GS2 you can try your battery with his to see if it still works. The try the USB Jig mentioned above to get in to download mode if you haven't done so yet.
Depending on when you got your phone and if you have the original receipt you can try contacting Samsung and get a RMA code to send the phone to a be fixed at a support center. Your last option would be to sell the phone for parts if it's still in any good condition. Good luck!
FineTalent said:
Are you sure your phone does not charge or it just doesn't simply turn on? Try testing your battery, maybe if a friend has a similar GS2 you can try your battery with his to see if it still works. The try the USB Jig mentioned above to get in to download mode if you haven't done so yet.
Depending on when you got your phone and if you have the original receipt you can try contacting Samsung and get a RMA code to send the phone to a be fixed at a support center. Your last option would be to sell the phone for parts if it's still in any good condition. Good luck!
Click to expand...
Click to collapse
Thanks alot. Where's the best place to buy a USB Jig. I couldn't sell my phone for parts, I'd smash it to pieces first. Sounds dumb but that's how I roll. I tried a different battery that didn't work. A USB jig is my last hope, Unless there's a place I could send it for repair outta my pocket. Guess I gotta excuse to buy the Note ll now.
CottonCreeper said:
Thanks alot. Where's the best place to buy a USB Jig. I couldn't sell my phone for parts, I'd smash it to pieces first. Sounds dumb but that's how I roll. I tried a different battery that didn't work. A USB jig is my last hope, Unless there's a place I could send it for repair outta my pocket. Guess I gotta excuse to buy the Note ll now.
Click to expand...
Click to collapse
Since you seem like the type who likes to mess around with things, you can try making a USB jig on your own. This site has great instructions on how to do so. If you have a USB cable which I'm sure you do and go to your closest electronics store you can find some resistors. Hopefully that will help you out before you go ahead with buying the Note 2, GS4 or whatever the next expensive flagship phone is, lol. Good luck!
FineTalent said:
Since you seem like the type who likes to mess around with things, you can try making a USB jig on your own. This site has great instructions on how to do so. If you have a USB cable which I'm sure you do and go to your closest electronics store you can find some resistors. Hopefully that will help you out before you go ahead with buying the Note 2, GS4 or whatever the next expensive flagship phone is, lol. Good luck!
Click to expand...
Click to collapse
That's just the information I was looking for. Thanks tremendously for taking the time to help...
CottonCreeper said:
That's just the information I was looking for. Thanks tremendously for taking the time to help...
Click to expand...
Click to collapse
You can buy a usb jig on amazon and you get it in 3-4 days for $5.
Sent from my SGH-T989 using Tapatalk
first make sure you are brick if i remember you can get in to download mode even with batt removed now if for sure brick or broke to no turn on now you can take your pick
if you have tmo warranty that is the fastest and free if they fine its not your fault if it is then will cost 150 to replaces whole phone if i remember right but the phone comes in mail fast they send new phone you send in old takes 1 day
go with samsung the same but if they find its broke and your fault idk how much they cost but it will take longer to fix 2 days to ship phone their 2-3 to process and fix and 2 to send back
Dexster said:
first make sure you are brick if i remember you can get in to download mode even with batt removed now if for sure brick or broke to no turn on now you can take your pick
if you have tmo warranty that is the fastest and free if they fine its not your fault if it is then will cost 150 to replaces whole phone if i remember right but the phone comes in mail fast they send new phone you send in old takes 1 day
go with samsung the same but if they find its broke and your fault idk how much they cost but it will take longer to fix 2 days to ship phone their 2-3 to process and fix and 2 to send back
Click to expand...
Click to collapse
Yeah per my original post I couldn't get into download mode, and the failure wasn't caused by an improper kernel flash.
I got the replacement through T-Mobile today, and sent the old out.

[Q] tried flasing rom and phone is dead..

i got a samsung gs3 yesterday, i loved everything but battery life, lastnight i used George Holtz's "towel root" and rooted my phone, added super user and rom toolbox, upgraded my recovery to clockwork mod basic, and proceded to flash to "flashingdroid version 2.2" it went thru everything and installed the rom, when it tried to reboot, it went black... now it does nothing, computer tries to recognize it, abut i cant get it to download mode, and i cant get it into recovery mode... it does not show charge picture when plugged in and if i take the battery out, plug it in, then insert the battery i get a red light... PLEASE HELP!!!!!!!
noobbrokes3 said:
i got a samsung gs3 yesterday, i loved everything but battery life, lastnight i used George Holtz's "towel root" and rooted my phone, added super user and rom toolbox, upgraded my recovery to clockwork mod basic, and proceded to flash to "flashingdroid version 2.2" it went thru everything and installed the rom, when it tried to reboot, it went black... now it does nothing, computer tries to recognize it, abut i cant get it to download mode, and i cant get it into recovery mode... it does not show charge picture when plugged in and if i take the battery out, plug it in, then insert the battery i get a red light... PLEASE HELP!!!!!!!
Click to expand...
Click to collapse
What model is your phone? You flashed a i9300 ROM, this is the sub-forum for the i747.
its the i747, i before looking today never knew there were more than 1 model of the GS3, is it possible to fix it?
This may help:
http://forum.xda-developers.com/showthread.php?t=2549068
audit13 said:
This may help:
http://forum.xda-developers.com/showthread.php?t=2549068
Click to expand...
Click to collapse
my problem is my phone does NOT vibrate when power button is pressed, it isnt doing ANYTHING at ALL, the red charging light only comes on when battery is left out and the phone is plugged in, light turns off after a minute or so of the battery being installed, to me it seems like less rom flash related, and more failure in the board, but im not good at this stuff so im probably wrong, i bought a verizon one (i535) for 50 bucks (pretty banged up touchscreen is cracked in several places i got it without a back cover,but it works,) to get me by but i miss my 4g on straight talk =( i wish i had just left it alone, it was clean just 1 crack in the touch screen wires ans such for lcdanddigitizer got cut by accient while trying to modify midframe for verizon board, i sure as hell cant afford the att version for a while 150-260 for a decent i747, is it possible that a JTAG service would be able to bring it to life or even one of those dongles to force recovery?
noobbrokes3 said:
my problem is my phone does NOT vibrate when power button is pressed, it isnt doing ANYTHING at ALL, the red charging light only comes on when battery is left out and the phone is plugged in, light turns off after a minute or so of the battery being installed, to me it seems like less rom flash related, and more failure in the board, but im not good at this stuff so im probably wrong, i bought a verizon one (i535) for 50 bucks (pretty banged up touchscreen is cracked in several places i got it without a back cover,but it works,) to get me by but i miss my 4g on straight talk =( i wish i had just left it alone, it was clean just 1 crack in the touch screen wires ans such for lcdanddigitizer got cut by accient while trying to modify midframe for verizon board, i sure as hell cant afford the att version for a while 150-260 for a decent i747, is it possible that a JTAG service would be able to bring it to life or even one of those dongles to force recovery?
Click to expand...
Click to collapse
It could be a board failure but it happened right after you flashed the ROM which leads me to believe it is software related.
A dongle is not going to help since the phone won't even power up. A jtag service would be your best and quickest option. You should try and find a shop that will guarantee to revive the phone or you pay nothing.
This might help with your current phone: http://www.xda-developers.com/android/how-to-make-your-verizon-galaxy-s-iii-a-world-phone/
noobbrokes3 said:
my problem is my phone does NOT vibrate when power button is pressed, it isnt doing ANYTHING at ALL, the red charging light only comes on when battery is left out and the phone is plugged in, light turns off after a minute or so of the battery being installed, to me it seems like less rom flash related, and more failure in the board, but im not good at this stuff so im probably wrong, i bought a verizon one (i535) for 50 bucks (pretty banged up touchscreen is cracked in several places i got it without a back cover,but it works,) to get me by but i miss my 4g on straight talk =( i wish i had just left it alone, it was clean just 1 crack in the touch screen wires ans such for lcdanddigitizer got cut by accient while trying to modify midframe for verizon board, i sure as hell cant afford the att version for a while 150-260 for a decent i747, is it possible that a JTAG service would be able to bring it to life or even one of those dongles to force recovery?
Click to expand...
Click to collapse
Flashing an i9300 rom is guaranteed to hard brick the device and cause exactly what you described. If you follow the instructions in the thread linked in an above post it probably has a 90% chance of fixing it.
I am 99% certain it is not a hardware failure. Others have done the exact same thing and were able to fix it by using the instructions in that thread.
audit13 said:
It could be a board failure but it happened right after you flashed the ROM which leads me to believe it is software related.
A dongle is not going to help since the phone won't even power up. A jtag service would be your best and quickest option. You should try and find a shop that will guarantee to revive the phone or you pay nothing.
This might help with your current phone: http://www.xda-developers.com/android/how-to-make-your-verizon-galaxy-s-iii-a-world-phone/
Click to expand...
Click to collapse
i found one on ebay, full refund short of a 5 dollar shipping cost for return shipping, once i have money that i can spend ill sure as hell be giving it a shot
Or you can attempt to fix it for free.....but I suppose that is up to you.
DocHoliday77 said:
Or you can attempt to fix it for free.....but I suppose that is up to you.
Click to expand...
Click to collapse
either way its gonna cost me a little cash, i dont have a 16 gig sd card, forgive me for being so noob but the sd card trick CAN work for my case?? i know for a fact i cant do anythingto my phone right now as it wont even power on, but if you BELIEVE it will work ill gove it a try
Unless you updated with the kk ota, you are probably on 4.3 firmware. I cannot guarantee it will work, but I believe the chances are pretty good that it will.
Just remember, if it doesn't work, dont give up on the first try. Many have had to run through the process several times before it would actually boot up again.
The only other tip I can think to give is to make sure you buy a decent sd card. It doesn't have to be top of the line, but there are tons of fake ones out there that would be less likely to work. If you can, try to buy one from an authorized dealer for whatever brand you are considering. This greatly reduces the chance of getting a bad card.
DocHoliday77 said:
Unless you updated with the kk ota, you are probably on 4.3 firmware. I cannot guarantee it will work, but I believe the chances are pretty good that it will.
Just remember, if it doesn't work, dont give up on the first try. Many have had to run through the process several times before it would actually boot up again.
The only other tip I can think to give is to make sure you buy a decent sd card. It doesn't have to be top of the line, but there are tons of fake ones out there that would be less likely to work. If you can, try to buy one from an authorized dealer for whatever brand you are considering. This greatly reduces the chance of getting a bad card.
Click to expand...
Click to collapse
4.0.x was the last firmware, i never got to update it. i bought a PNY 16gb microSD HC class 4, it was 25 bucks at the local drug store, i was hoping for a class 6 - 10 but i believe it is a good quality card, maybe you would know better?
I won't lie, I am not a big fan of PNY, but as long as its the real thing, I think it should work. Class 6 or better is recommended, but it has worked on class 4 cards too. At this point, the only thing left to do is give it a shot. Good luck!

Categories

Resources