Related
Hi, I am a Nexus 7 user and was tried to root my device using the Toolkit v1.8.2
I am not experience in rooting Android machine, this was my first time and unsuccessful. My device is now could not be started up.
The following is all information I summarized for this exercise, and would like to seek all advice on the followings.
--1 Is my device "recoverable" if yes, how and what do I need to do please?
--2/ or is it definitely "bricked" so I have no chance to recover it at all.
I am totally in-familiar with rooting machine and I have no access to Linux machine.
Any advice is welcome.
Thx in advance.
Machine: Nexus 7 v2- wifi version Android 4.4.2, Build - KOT49H
Computer: Windows 7 64 bit system
Nexus Root Toolkit v1.8.2
Worked procedure:
1/ Follow the "Initial Setup - Full Driver Installation Guide- Automatic + Manual"
Step 1 to Step 4, install the drivers on the computer. and "Full Driver Test" passed
2/ Click "Unlock", pressed "Y" to proceed. - Device went into a screen asking me to select and confirm, I used the "Vol +" to select "yes" and pressed "power" to confirm, but nothing happened on both computer and device after the "power" switch was pressed. Instead, it freeze the device. nothing is responding even after 10 minutes.
3/ I have pressed the "power button again for 5 sec. and device shutdown to black screen.
4/ Since then, every time I try to start the device, the machine first show a "Google" , then a "rotating flower pattern" and won't started. i.e. - "the flower pattern" keeps looping.
5/ on the computer side, no matter what command is given in Nexus Root Toolkit, a notification of ADB device was not found error comes up.
Consequence
A) Device can be switched on and off by pressing "power" button. when switch on, it display "Google" , then a rotating flower pattern, and never end.
Switch the power button for 5 sec again, device switch off.
B) When device is off, press 'power' and "vol -" will switch on the device to a menu with a robot lay down, options "Restart bootloader", "Recovery mode", "Power off" and "Start" can be selected.
C) For "restart bootloader" the screen goes black for 2 sec, then the menu appear again with "Start" option. i.e.- no error no message
D) For "Start " - the device just just act like normal start, end up in a looping rotating flower pattern.
E) For " Recovery mode" - device screen goes black for 3 sec. show "Google" then show a dead robot with an exclamation mark on it, message " No command" is showing. - After awhile, device restarted and end up in the rotating flower pattern.
F) When plugged in, Window 7 can detect the device, when teh device is in the menu, "Android Bootloader Interface" is shown in Windows Device manager, when the device is starting, " Nexus 7" is detected in Windows Device manager but not both.Hi, I am a Nexus 7 user and was tried to root my device using the Toolkit v1.8.2
I am not experience in rooting Android machine, this was my first time and unsuccessful. My device is now could not be started up.
The following is all information I summarized for this exercise, and would like to seek all advice on the followings.
--1 Is my device "recoverable" if yes, how and what do I need to do please?
--2/ or is it definitely "bricked" so I have no chance to recover it at all.
I am totally in-familiar with rooting machine and I have no access to Linux machine.
Any advice is welcome.
Thx in advance.
Machine: Nexus 7 v2- wifi version Android 4.4.2, Build - KOT49H
Computer: Windows 7 64 bit system
Nexus Root Toolkit v1.8.2
Worked procedure:
1/ Follow the "Initial Setup - Full Driver Installation Guide- Automatic + Manual"
Step 1 to Step 4, install the drivers on the computer. and "Full Driver Test" passed
2/ Click "Unlock", pressed "Y" to proceed. - Device went into a screen asking me to select and confirm, I used the "Vol +" to select "yes" and pressed "power" to confirm, but nothing happened on both computer and device after the "power" switch was pressed. Instead, it freeze the device. nothing is responding even after 10 minutes.
3/ I have pressed the "power button again for 5 sec. and device shutdown to black screen.
4/ Since then, every time I try to start the device, the machine first show a "Google" , then a "rotating flower pattern" and won't started. i.e. - "the flower pattern" keeps looping.
5/ on the computer side, no matter what command is given in Nexus Root Toolkit, a notification of ADB device was not found error comes up.
Consequence
A) Device can be switched on and off by pressing "power" button. when switch on, it display "Google" , then a rotating flower pattern, and never end.
Switch the power button for 5 sec again, device switch off.
B) When device is off, press 'power' and "vol -" will switch on the device to a menu with a robot lay down, options "Restart bootloader", "Recovery mode", "Power off" and "Start" can be selected.
C) For "restart bootloader" the screen goes black for 2 sec, then the menu appear again with "Start" option. i.e.- no error no message
D) For "Start " - the device just just act like normal start, end up in a looping rotating flower pattern.
E) For " Recovery mode" - device screen goes black for 3 sec. show "Google" then show a dead robot with an exclamation mark on it, message " No command" is showing. - After awhile, device restarted and end up in the rotating flower pattern.
F) When plugged in, Window 7 can detect the device, when teh device is in the menu, "Android Bootloader Interface" is shown in Windows Device manager, when the device is starting, " Nexus 7" is detected in Windows Device manager but not both.
chanwt12000 said:
Hi, I am a Nexus 7 user and was tried to root my device using the Toolkit v1.8.2
I am not experience in rooting Android machine, this was my first time and unsuccessful. My device is now could not be started up.
The following is all information I summarized for this exercise, and would like to seek all advice on the followings.
--1 Is my device "recoverable" if yes, how and what do I need to do please?
--2/ or is it definitely "bricked" so I have no chance to recover it at all.
I am totally in-familiar with rooting machine and I have no access to Linux machine.
Any advice is welcome.
Thx in advance.
Machine: Nexus 7 v2- wifi version Android 4.4.2, Build - KOT49H
Computer: Windows 7 64 bit system
Nexus Root Toolkit v1.8.2
Worked procedure:
1/ Follow the "Initial Setup - Full Driver Installation Guide- Automatic + Manual"
Step 1 to Step 4, install the drivers on the computer. and "Full Driver Test" passed
2/ Click "Unlock", pressed "Y" to proceed. - Device went into a screen asking me to select and confirm, I used the "Vol +" to select "yes" and pressed "power" to confirm, but nothing happened on both computer and device after the "power" switch was pressed. Instead, it freeze the device. nothing is responding even after 10 minutes.
3/ I have pressed the "power button again for 5 sec. and device shutdown to black screen.
4/ Since then, every time I try to start the device, the machine first show a "Google" , then a "rotating flower pattern" and won't started. i.e. - "the flower pattern" keeps looping.
5/ on the computer side, no matter what command is given in Nexus Root Toolkit, a notification of ADB device was not found error comes up.
Consequence
A) Device can be switched on and off by pressing "power" button. when switch on, it display "Google" , then a rotating flower pattern, and never end.
Switch the power button for 5 sec again, device switch off.
B) When device is off, press 'power' and "vol -" will switch on the device to a menu with a robot lay down, options "Restart bootloader", "Recovery mode", "Power off" and "Start" can be selected.
C) For "restart bootloader" the screen goes black for 2 sec, then the menu appear again with "Start" option. i.e.- no error no message
D) For "Start " - the device just just act like normal start, end up in a looping rotating flower pattern.
E) For " Recovery mode" - device screen goes black for 3 sec. show "Google" then show a dead robot with an exclamation mark on it, message " No command" is showing. - After awhile, device restarted and end up in the rotating flower pattern.
F) When plugged in, Window 7 can detect the device, when teh device is in the menu, "Android Bootloader Interface" is shown in Windows Device manager, when the device is starting, " Nexus 7" is detected in Windows Device manager but not both.Hi, I am a Nexus 7 user and was tried to root my device using the Toolkit v1.8.2
I am not experience in rooting Android machine, this was my first time and unsuccessful. My device is now could not be started up.
The following is all information I summarized for this exercise, and would like to seek all advice on the followings.
--1 Is my device "recoverable" if yes, how and what do I need to do please?
--2/ or is it definitely "bricked" so I have no chance to recover it at all.
I am totally in-familiar with rooting machine and I have no access to Linux machine.
Any advice is welcome.
Thx in advance.
Machine: Nexus 7 v2- wifi version Android 4.4.2, Build - KOT49H
Computer: Windows 7 64 bit system
Nexus Root Toolkit v1.8.2
Worked procedure:
1/ Follow the "Initial Setup - Full Driver Installation Guide- Automatic + Manual"
Step 1 to Step 4, install the drivers on the computer. and "Full Driver Test" passed
2/ Click "Unlock", pressed "Y" to proceed. - Device went into a screen asking me to select and confirm, I used the "Vol +" to select "yes" and pressed "power" to confirm, but nothing happened on both computer and device after the "power" switch was pressed. Instead, it freeze the device. nothing is responding even after 10 minutes.
3/ I have pressed the "power button again for 5 sec. and device shutdown to black screen.
4/ Since then, every time I try to start the device, the machine first show a "Google" , then a "rotating flower pattern" and won't started. i.e. - "the flower pattern" keeps looping.
5/ on the computer side, no matter what command is given in Nexus Root Toolkit, a notification of ADB device was not found error comes up.
Consequence
A) Device can be switched on and off by pressing "power" button. when switch on, it display "Google" , then a rotating flower pattern, and never end.
Switch the power button for 5 sec again, device switch off.
B) When device is off, press 'power' and "vol -" will switch on the device to a menu with a robot lay down, options "Restart bootloader", "Recovery mode", "Power off" and "Start" can be selected.
C) For "restart bootloader" the screen goes black for 2 sec, then the menu appear again with "Start" option. i.e.- no error no message
D) For "Start " - the device just just act like normal start, end up in a looping rotating flower pattern.
E) For " Recovery mode" - device screen goes black for 3 sec. show "Google" then show a dead robot with an exclamation mark on it, message " No command" is showing. - After awhile, device restarted and end up in the rotating flower pattern.
F) When plugged in, Window 7 can detect the device, when teh device is in the menu, "Android Bootloader Interface" is shown in Windows Device manager, when the device is starting, " Nexus 7" is detected in Windows Device manager but not both.
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=2741375&stc=1&d=1399986292
http://forum.xda-developers.com/attachment.php?attachmentid=2741374&stc=1&d=1399986292
http://forum.xda-developers.com/attachment.php?attachmentid=2741373&stc=1&d=1399986292
I'll take up the task to help you. You are not bricked. You are stuck in something called a bootloop, which is basically when the device enters the boot sequence, but never finishes. The flower pattern that you are looking at us called the boot animation. The computer never recoginizes the tablet through ADB because the tablet never gets to that point.
The screen with the Android laying on his back is actually the bootloader itself. That's why restarting the bootloader brings you to the same screen. I actually want you to be in the bootloader screen. You already have the Nexus 7.2 drivers, so you're ahead of the game.
You also need to visit here to download TWRP 2.7. You also need to put the file in the same directory as the fastboot and adb files.
You need to boot into the bootloader, and run the command:
fastboot flash recovery <recoveryname>.img
This should get TWRP onto your device. You can then download a rom of your choice to put on the tablet. Since you will not have access to place files on the device through USB, you will have to sideload it. First, let's get recovery working, then come back to me if you need help sideloading the rom through ADB while in recovery.
Dear aarsyl,
Thx for your help and it is much better to know my device is not "bricked". Thx again!
Thx for your detailed explaination and I feel much better by knowing a little bit more on what is going on.
>>>>You also need to visit here to download TWRP 2.7. You also need to put the file in the same directory as the fastboot and adb files.
[I also found it in my computer already .\WugFresh Development\data\Recovery_Custom\TWRP
but I downlaod it again from your link and put this file in the same directory where I find the fastboot.exe and adb.exe, which in my case is .\WugFresh Development\data\ ------ done.]
>>>>You need to boot into the bootloader, and run the command:
[- I supose you refer to my Nexus 7, so I will switch it on with the "power button + vol -" button. and get it into the bootloader.]
>>>>fastboot flash recovery <recoveryname>.img
[Here I got an query, what image file I need to use? is it the <openrecovery-twrp-2.7.0.0-flo> ? Do I neeed to run it as an adminstartor in Window 7?
so, do u mean I need to type: fastboot flash recovery openrecovery-twrp-2.7.0.0-flo.img ?
is it right?--(A)
if not, then I am not sure what recovery file to be used!
I do not have any other img file in package I downloaded previously
>>>>This should get TWRP onto your device. You can then download a rom of your choice to put on the tablet. Since you will not have access to place files on the device through USB, you will have to sideload it. First, let's get recovery working, then come back to me if you need help sideloading the rom through ADB while in recovery.
Not quite understand it this bit, but as you say. it can wait later.
So assume I do the "fastboot flash recovery <recoveryname>.img and get the TWRP on the Nexus 7.
What do I expect to see from the nexus screen. Does it have any note saying completed, or shuold I expect a reboot of the Nexus.
I think one of the problem dealing with these kind of thing is lack of acknowledgment fromt eh machine so we do not know if the operation is successful or not.
chanwt12000 said:
Dear aarsyl,
Thx for your help and it is much better to know my device is not "bricked". Thx again!
Thx for your detailed explaination and I feel much better by knowing a little bit more on what is going on.
>>>>You also need to visit here to download TWRP 2.7. You also need to put the file in the same directory as the fastboot and adb files.
[I also found it in my computer already .\WugFresh Development\data\Recovery_Custom\TWRP
but I downlaod it again from your link and put this file in the same directory where I find the fastboot.exe and adb.exe, which in my case is .\WugFresh Development\data\ ------ done.]
>>>>You need to boot into the bootloader, and run the command:
[- I supose you refer to my Nexus 7, so I will switch it on with the "power button + vol -" button. and get it into the bootloader.]
>>>>fastboot flash recovery <recoveryname>.img
[Here I got an query, what image file I need to use? is it the <openrecovery-twrp-2.7.0.0-flo> ? Do I neeed to run it as an adminstartor in Window 7?
so, do u mean I need to type: fastboot flash recovery openrecovery-twrp-2.7.0.0-flo.img ?
is it right?--(A)
if not, then I am not sure what recovery file to be used!
I do not have any other img file in package I downloaded previously
>>>>This should get TWRP onto your device. You can then download a rom of your choice to put on the tablet. Since you will not have access to place files on the device through USB, you will have to sideload it. First, let's get recovery working, then come back to me if you need help sideloading the rom through ADB while in recovery.
Not quite understand it this bit, but as you say. it can wait later.
So assume I do the "fastboot flash recovery <recoveryname>.img and get the TWRP on the Nexus 7.
What do I expect to see from the nexus screen. Does it have any note saying completed, or shuold I expect a reboot of the Nexus.
I think one of the problem dealing with these kind of thing is lack of acknowledgment fromt eh machine so we do not know if the operation is successful or not.
Click to expand...
Click to collapse
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
I decided to have a go with the downloaded twrp img file.
I launched the command " fastboot flash recovery openrecovery-twrp-2.7.0.0-flo.img" from a command window as an adminstrator.
The command failed with an error saying (remote: Bootloader is locked)
And when I check the Nexus 7 screen, it does said "Locked Status - locked" in the last line.
photo showing both the computer and teh Nexus 7 screen.
Oh, I hadn't realized that you were still locked. No wonder you're not getting anywhere.
Reboot into the bootloader, and run:
fastboot oem unlock
Follow the screen instructions to unlock the bootloader, then run the command to flash the recovery. I advise changing the recovery name to something shorter and simpler, like twrp27flo.img, for example.
aarsyl said:
Oh, I hadn't realized that you were still locked. No wonder you're not getting anywhere.
Reboot into the bootloader, and run:
fastboot oem unlock
Follow the screen instructions to unlock the bootloader, then run the command to flash the recovery. I advise changing the recovery name to something shorter and simpler, like twrp27flo.img, for example.
Click to expand...
Click to collapse
Hi, Nice to have reply from you again.
Ammm. I switch on the device to the bootloader alright. run teh command "fastboot oem unlock"
On teh command window, it said" < waiting for device>
and there is no visible change on the device screen.
It already last for 10 minutes now.
I do noted that both windows are freezed and do not respond to key press and button press respectively. No responds on both the device and computer.
How lond does this process take to show the mentioned "screen instruction"? I don't see one!
chanwt12000 said:
Hi, Nice to have reply from you again.
Ammm. I switch on the device to the bootloader alright. run teh command "fastboot oem unlock"
On teh command window, it said" < waiting for device>
and there is no visible change on the device screen.
It already last for 10 minutes now.
I do noted that both windows are freezed and do not respond to key press and button press respectively. No responds on both the device and computer.
How lond does this process take to show the mentioned "screen instruction"? I don't see one!
Click to expand...
Click to collapse
wow.. it is unlocked now!
Should I continue to use the "fastboot recover command with TWRP file" as per your advise or should I continue to use the "Root" command in NexusRoot Toolkit ??
It is very happy to see there is progress.. Thx...
please keep coming...
I would go with using fastboot to install TWRP. In truth, to truly "root" your device, you actually need a working rom on the device. Otherwise, rooting will be in vain. Unlocking the device was the most important.
aarsyl said:
I would go with using fastboot to install TWRP. In truth, to truly "root" your device, you actually need a working rom on the device. Otherwise, rooting will be in vain. Unlocking the device was the most important.
Click to expand...
Click to collapse
Hi again,
Yes. my device is now boot up as brand new.
One side observation though, every time I issue command through window 7 in a command window, everything will freeze up, (not remember if I unplugged the device) until I press the power button to restart the Nexus 7. Same for the last time when i did the unlock and this time recovery.
The hesitation was how do I know when to do this, was worrying there is still some communication between the two machines if I unplug or interfer, may just disturb the communication and corrupt files. -- I normally give it some 10 minutes before I do the unplug and restart. any comment or advice?
Anyway, the device is now up and running. What is the status now? is it with the original version of software? or TWRP version or what?
The device is now remain "unlocked" - is it ok or I need to lock it again?
You have mentioned to download a "Rom", what about it, it is only need if i want to continue to "root " the device?
Sorry for so much question.
I am so happy to see it comes alive again but really would like to understand the current status of it.
Thank again. aarsyl
To be honest, I'm not entirely sure what the status of your device is right now. I was under the implication that you had no Rom on the device. Since you are trying to root for the first time, then yes, you are on the stock software that comes with the device. If you search your app drawer and find the SuperSU app, then you are already rooted, my friend. If it is not there, then search for SuperSU 1.94 in Google, and download the zip file. Then reboot into recovery and flash it.
In other news, I am happy that you got your device working, and I am more than happy to help. The only thing that I don't do is recommend roms. I encourage users to explore different roms for themelves.
[b]AarSyl[/b] said:
To be honest, I'm not entirely sure what the status of your device is right now. I was under the implication that you had no Rom on the device. Since you are trying to root for the first time, then yes, you are on the stock software that comes with the device.>>> since you mentioned I probably have no rom on the device...and you also mentioned "stock software with my device"..I think these are 2 different things right? because i always thought they are the same thing.
If you search your app drawer and find the SuperSU app, >>>App drawer, do you refer to the Apps Tab under Setting? I don't have SuperSU in there.
then you are already rooted, my friend. If it is not there, then search for SuperSU 1.94 in Google, and download the zip file.
Then reboot into recovery and flash it. >>>>I have to say you lost me, do u mean use the ""fastboot flash recovery <Super SU file>.img" command?
In other news, I am happy that you got your device working, and I am more than happy to help. The only thing that I don't do is recommend roms. I encourage users to explore different roms for themelves.>>>No problem, I shall be looking out for that
Click to expand...
Click to collapse
Well, sure I will continues to look up the information from the basic, but at the moment Would you please enlight me for the following 2 questions
1/ Should I uncheck or check the USB debugging tab under Developer options - it will be very good if you would like to explain a little on what it does, so I will have a more l\idea what it does when when do i need them.
2/ As i said, teh device is now unlocked, is it ok to leave it unlock or should i have it lock? - again if you would explain a little more on this that will be marvest.
cheers
chanwt12000 said:
Well, sure I will continues to look up the information from the basic, but at the moment Would you please enlight me for the following 2 questions
1/ Should I uncheck or check the USB debugging tab under Developer options - it will be very good if you would like to explain a little on what it does, so I will have a more l\idea what it does when when do i need them.
2/ As i said, teh device is now unlocked, is it ok to leave it unlock or should i have it lock? - again if you would explain a little more on this that will be marvest.
cheers
Click to expand...
Click to collapse
I'm sorry for the long delay. I got locked out trying to log in after I changed my username twice, and it just got messy for me. At any rate....the SuperSU zip file is to be flashed through recovery. When you boot into recovery, select Install, then navigate through the device to find the folder that the file is located. Follow the screen directions to flash items.
USB Debugging needs to be checked for ADB to work, so.....yeah....leave it on.
You don't have to relock your device unless you have to bring it back to the store for repairs. It only stops you from making changes in the bootloader, such as flashing new recoveries, and I think that most fastboot commands might be blocked. I have never tried to use fastboot on a locked device, so I really don't know. Leaving the device unlocked doesn't make it vulnerable or anything, at least to my knowledge.
AarSyl said:
I'm sorry for the long delay. I got locked out trying to log in after I changed my username twice, and it just got messy for me. At any rate....the SuperSU zip file is to be flashed through recovery. When you boot into recovery, select Install, then navigate through the device to find the folder that the file is located. Follow the screen directions to flash items.
USB Debugging needs to be checked for ADB to work, so.....yeah....leave it on.
You don't have to relock your device unless you have to bring it back to the store for repairs. It only stops you from making changes in the bootloader, such as flashing new recoveries, and I think that most fastboot commands might be blocked. I have never tried to use fastboot on a locked device, so I really don't know. Leaving the device unlocked doesn't make it vulnerable or anything, at least to my knowledge.
Click to expand...
Click to collapse
Thx for your advices AarSyl,
I have successfully root the device and get the Super user app running by following one of tutorial video.
For the first time, when I start at teh bootloader and conduct a "Recovery", it shows a dead robot again but without "no command". I have to redo the fastboot command in the command window with the TWRP recovery file once again. (but this time is very smooth no need to unplug cable that sorts of thing) then I get into the TWRP menu after "Recovery".
chanwt12000 said:
Thx for your advices AarSyl,
I have successfully root the device and get the Super user app running by following one of tutorial video.
For the first time, when I start at teh bootloader and conduct a "Recovery", it shows a dead robot again but without "no command". I have to redo the fastboot command in the command window with the TWRP recovery file once again. (but this time is very smooth no need to unplug cable that sorts of thing) then I get into the TWRP menu after "Recovery".
Click to expand...
Click to collapse
Great. I'm happy that it is working for you. A little tip...download Quick Boot from the Play Store. With one touch, you can power off, boot into the bootloader, boot into recovery, or reboot Android.
My HTC One M8 (Verizon) is seemingly bricked. My phone is rooted, S-Off, with the stock ROM. I have been trying to update to the latest OTA update by returning to stock. I had previously modified some entries in the Build.prop and Platform.xml. I knew those had to be default in order for the OTA to work. I had copied the original files and pasted them to my SD Card so that I could simply cut the modified versions, paste them to my SD Card, and cut the originals from my SD Card and put them in their corresponding system folders.
Upon a reboot something apparently went horribly wrong because all my phone does now is boot with the white screen and green HTC Logo, then the screen goes black. I have tried the typical Power Button + Volume Down but it won't enter the boot loader. The good news is that the USB port seems to still work for my windows computer recognizes a device connecting to it but it doesn't show up as an interactive device in windows explorer..if that makes sense.
Please Help!
SF-Echo18 said:
My HTC One M8 (Verizon) is seemingly bricked. My phone is rooted, S-Off, with the stock ROM. I have been trying to update to the latest OTA update by returning to stock. I had previously modified some entries in the Build.prop and Platform.xml. I knew those had to be default in order for the OTA to work. I had copied the original files and pasted them to my SD Card so that I could simply cut the modified versions, paste them to my SD Card, and cut the originals from my SD Card and put them in their corresponding system folders.
Upon a reboot something apparently went horribly wrong because all my phone does now is boot with the white screen and green HTC Logo, then the screen goes black. I have tried the typical Power Button + Volume Down but it won't enter the boot loader. The good news is that the USB port seems to still work for my windows computer recognizes a device connecting to it but it doesn't show up as an interactive device in windows explorer..if that makes sense.
Please Help!
Click to expand...
Click to collapse
When you connect it to the PC can you pick up the device with adb? If so, have you tried to run the command from adb to boot it into bootloader? adb devices ... if found, adb reboot bootloader
:fingers-crossed:
BerndM14 said:
When you connect it to the PC can you pick up the device with adb? If so, have you tried to run the command from adb to boot it into bootloader? adb devices ... if found, adb reboot bootloader
:fingers-crossed:
Click to expand...
Click to collapse
I'm not too familiar with ADB commands but I typed in "adb reboot recovery" and it said: "error: device not found" so even if my command was wrong it's still not detecting it. I also tried: "fastboot reboot bootloader" and it just says "waiting for device"
Also I feel like it's worth mentioning the phone is automatically rebooting every two minutes or so (haven't timed it exactly but it's a while). Still showing the green HTC Logo then the screen goes dim, then the screen turns off.
SF-Echo18 said:
I'm not too familiar with ADB commands but I typed in "adb reboot recovery" and it said: "error: device not found" so even if my command was wrong it's still not detecting it. I also tried: "fastboot reboot bootloader" and it just says "waiting on device for device"
Also I feel like it's worth mentioning the phone is automatically rebooting every two minutes or so (haven't timed it exactly but it's a while). Still showing the green HTC Logo then the screen goes dim, then the screen turns off.
Click to expand...
Click to collapse
Try holding volume UP + Power button, this simulates a "battery pull", just hold it in for a while it can take a while to "pull", when it's off try again booting into bootloader, volume DOWN + Power button.
BerndM14 said:
Try holding volume UP + Power button, this simulates a "battery pull", just hold it in for a while it can take a while to "pull", when it's off try again booting into bootloader, volume DOWN + Power button.
Click to expand...
Click to collapse
I held Volume Up + Power Button and it showed the white screen with the green HTC logo. I then released all buttons. Once the screen turned off I then held Volume Down + Power Button for two minutes straight and nothing happened.
Even though we haven't found a solution yet, I am appreciative of the help.
sounds like you never installed the htc drivers for your phone, hence your pc doesn't see the phone when you are doing ADB commands.
install the drivers for it, then try the ADB commands via your pc
and dont mess with the build prop or other system files unless you have a working back up and are 101% certain about what you are doing..
Just remember to change directory in command prompt to the folder where adb.exe is located.
I don't know why the device doesn't reboot into bootloader though when you hold volume down + power button, shouldn't have to hold it for 2minutes. Holding volume up + power button to simulate a "pull" should only take up to 20 seconds or so at most and pressing volume down + power will then immediately take you into bootloader mode, or at least it's supposed to.
Did you release the volume up / power combo when the screen went dead or before? Try holding it until the phone shuts off and then right away press volume down + power.
Sorry if I'm not answering right away though, busy eating, and will be here and away for the next hour or so while I get ready for work =o( once I leave for work I'll only be able to help some more after like 2 hours or so. Hopefully we can do something before then though =o)
wase4711 said:
sounds like you never installed the htc drivers for your phone, hence your pc doesn't see the phone when you are doing ADB commands.
install the drivers for it, then try the ADB commands via your pc
and dont mess with the build prop or other system files unless you have a working back up and are 101% certain about what you are doing..
Click to expand...
Click to collapse
You're right, I didn't install the drivers. I did so and ADB was able to recognize it and I was able to access the bootloader. Thank you everyone for your help. I won't be making the mistake again.
SF-Echo18 said:
You're right, I didn't install the drivers. I did so and ADB was able to recognize it and I was able to access the bootloader. Thank you everyone for your help. I won't be making the mistake again.
Click to expand...
Click to collapse
So you'll be able to fix it from here on then? I was just about to link this thread to you as well should you have gotten adb to work again, it's for the RUU for Verizon seeing as you said you're on Verizon.
But going by your response up there you might already know how to fix this issue further :good:
BerndM14 said:
So you'll be able to fix it from here on then? I was just about to link this thread to you as well should you have gotten adb to work again, it's for the RUU for Verizon seeing as you said you're on Verizon.
But going by your response up there you might already know how to fix this issue further :good:
Click to expand...
Click to collapse
Indeed I appreciate it, but I just finished installing the RUU ha. Hopefully this thread will be of use to someone in a similar circumstance in the future.
Share another method of getting into recovery mode on non-responsive blank screen
Hi,
I just want to share how I accessed recovery mode with the same build.prop issue but with S-ON (might work with S-Off too).
I found the solution from here:
http://forum.xda-developers.com/htc...ter-download-mode-t2853100/page2#post62490577
To get into recovery mode on a non-responsive blank screen, hold the power button and volume up button at the same time and then approximately after 10 seconds, switch from pressing the volume up to volume down button before the HTC logo white screen shows while still holding down the power button. After, a white boot screen will give an option to go into recovery mode.
The phone is in bootlopp (i think).When i turn on appears android on groundb with the red triangle and a chinese word.This disappears and appears again,for an infinite time.Display stays turned on.Turning on in bootloader it works,but just in bootloader.If i try to enter in "Restart bootloader,"recovery,"normal boot"ecc it's in bootloop again.So i can access only bootloader at the moment.I want to reflash system,droidboot imgs ecc with fastboot but...tried to recognize phone on an old HP Compaq nx6110 with usb 2.0 and win7.installed on it adb drivers,adb and fast-tools.don't think zenf2 drivers are important at the moment,now should consider just the adb drivers cause i can access only bootloader.however i think zenf2 drivers are installed on it.nothing.phone no recognized by fastboot and no recognized by windows.consider that on a xp and 2.0 usb pc (with fastboot,adb,and adb drivers on it) phone is recognized by windows as Android-Phone but then windows says i've not the drivers for the installation (appears the drivers' choosing window).No asus driver on it,on the win7 pc there are!!
CenereZar said:
The phone is in bootlopp (i think).When i turn on appears android on groundb with the red triangle and a chinese word.This disappears and appears again,for an infinite time.Display stays turned on.Turning on in bootloader it works,but just in bootloader.If i try to enter in "Restart bootloader,"recovery,"normal boot"ecc it's in bootloop again.So i can access only bootloader at the moment.I want to reflash system,droidboot imgs ecc with fastboot but...tried to recognize phone on an old HP Compaq nx6110 with usb 2.0 and win7.installed on it adb drivers,adb and fast-tools.don't think zenf2 drivers are important at the moment,now should consider just the adb drivers cause i can access only bootloader.however i think zenf2 drivers are installed on it.nothing.phone no recognized by fastboot and no recognized by windows.consider that on a xp and 2.0 usb pc (with fastboot,adb,and adb drivers on it) phone is recognized by windows as Android-Phone but then windows says i've not the drivers for the installation (appears the drivers' choosing window).No asus driver on it,on the win7 pc there are!!
Click to expand...
Click to collapse
When you see the dead android with red triangle, hold the power button and keep pressing it and quickly
press volume up button and release it but keep the power button and you will see the Recovery options.
Then choose "format Cache" with volume up & down button and enter with power button to format cache partition.
It would take a long time so don't be alarmed. When done, choose restart system and the boot loop should be fixed.
Good luck.
samteeee said:
When you see the dead android with red triangle, hold the power button and keep pressing it and quickly
press volume up button and release it but keep the power button and you will see the Recovery options.
Then choose "format Cache" with volume up & down button and enter with power button to format cache partition.
It would take a long time so don't be alarmed. When done, choose restart system and the boot loop should be fixed.
Good luck.
Click to expand...
Click to collapse
Thank you bro,you saved me
samteeee said:
When you see the dead android with red triangle, hold the power button and keep pressing it and quickly
press volume up button and release it but keep the power button and you will see the Recovery options.
Then choose "format Cache" with volume up & down button and enter with power button to format cache partition.
It would take a long time so don't be alarmed. When done, choose restart system and the boot loop should be fixed.
Good luck.
Click to expand...
Click to collapse
Didn't work for me ... if I keep pressed the power button for a long time, power off the phone and it doesn't entry in Recovery mode...
I resolved with "fastboot erase cache" command
It is normal to get that error when selecting 'recovery mode'
The next step is a little tricky. You have to press and hold the power button, then press the volume up button. It may take a few tries. Both buttons will have to be pressed together simultaneous to enter Android system recovery. Please also see http://www.asus.com/us/support/FAQ/1011956/
Sincerely,
ASUS_USA
Asus_USA said:
It is normal to get that error when selecting 'recovery mode'
The next step is a little tricky. You have to press and hold the power button, then press the volume up button. It may take a few tries. Both buttons will have to be pressed together simultaneous to enter Android system recovery. Please also see http://www.asus.com/us/support/FAQ/1011956/
Sincerely,
ASUS_USA
Click to expand...
Click to collapse
Hi,
I´m having a problem with mine. Can´t recognize phone in fastboot but it´s different. I already asked for help in general thread - all resources (page 47 to 50) but still can´t solve.
I rooted my device using method 3 (one click root) and first everything seems fine, but on my first reboot i entered on bootloader - recovery and started a wipe cache, but didn´t finished it, push power button and force it of (i seemeed stuck there - was wipping for more than 10 minutes). Since then i can´t solve anything, tried many ways to unbrick my phone but i seem the problem was i can´t connect fastboot. After a lot o tries, i entered in TWRP using method 2 and wipe, made a recovery, everything and as magic i can enter again on recovery, even tried adb sideload (it started, but when starts to write something - at 50% of the process just ended). So, long story short, i did a flash of the original firmware i downloaded from asus website using method 2 and now it´s working as original, but i still having the same problem (or maybe worst, since i can´t enter the TWRP recovery using method 2 anymore) and can´t root my device. When i tried to do anything using fastboot it´s just shows "FAILED", When i request adb devices shows a blank line. If my phone is on, using android, it shows the correct serial number.
I don´t know what´s happening, it seems to estabilsh a connection (when on its ok, method 2 freeze on teamwin logo - the tool can write something on phone) but can´t write anything. i´m worried because i think i won´t be able to do any update and i wanted a rooted phone to.
Anyone seems a solution?
I'm having the same problem today and I solved it just now! I can't even open the fastboot and recovery. Finally I install the software "shuame"(I'm Chinese, you guys may find other software) on my PC, and with it my computer read zenfone2, and I use the function in the software to open fastboot mode, then I flash the WW version recovery.img and boot.img with a one-click tool in zentalk(TW), then I just double wipe, the phone is alive now !
Sent from my ASUS_Z00AD using XDA Free mobile app
ityoung said:
I'm having the same problem today and I solved it just now! I can't even open the fastboot and recovery. Finally I install the software "shuame"(I'm Chinese, you guys may find other software) on my PC, and with it my computer read zenfone2, and I use the function in the software to open fastboot mode, then I flash the WW version recovery.img and boot.img with a one-click tool in zentalk(TW), then I just double wipe, the phone is alive now !
Sent from my ASUS_Z00AD using XDA Free mobile app
Click to expand...
Click to collapse
I don´t know any other software. Is this software only in chinese ? Can i try?
My phone is actually working, but i can´t flash anything, even MOFD_update.zip (the file it is used to make ota uptades)
is Your phone rooted? which method did you use? Now you can use fastboot normally?
Pixel 3 XL - "Your device is corrupt. It can't be trusted and may not work properly"
Hi All,
Please excuse my mistakes as I am very new to this.
With that out of the way some background:
I installed the OTA update for the January 5th security update 2 days ago on my Pixel 3 XL and something strange started to happen:
Every time I launched an app the phone would just restart. Upon restart it takes me to a black screen with the following text on it: "Your device is corrupt. It can't be trusted and may not work properly". It forces me to press the power button after which it boots. Although, there are some other symptoms after boot the phone is extremely slow (opening apps takes >5 mins) and random restarts at app launches.
I need help desperately. To remedy the above I restarted the phone multiple times with no change. I also tried factory resetting through the settings menu with no change to the phone. Furthermore, I have also tried wiping and factory resetting it through the recovery menu (power button and volume down followed by tapping the power button and volume up and then selecting wipe data and factory reset) and sadly this hasn't helped either.
Any kind of advice or step by step guide on this will be appreciated.
Please also let me know if you guys require further details and I will gladly provide screenshots/info.
Thanks.
fix for device corrupt
Hi there
I will help you to get rid of this error
Start with backing up your data. Connect your phone to your computer and copy the DCIM folder,the Android folder and if you have WhatsApp, copy the WhatsApp folder
Now go to the link mentioned below and download the full OTA image for your phone. Also install adb in your computer. Now go to settings in your phone and go to About Phone. There press the build number about 7 times and come back to the main screen. You will find an option called Developer Options. Click on it and scroll untill you see USB Debbuging. Click on it and press ok and go to the home screen. Now go to the folder in which you have adb installed. Hold Shift+Right click and click on open a command window here. Now type adb devices. Unlock your device and you will receive a prompt. Click on ok. Now type on your computer adb reboot recovery. Your phone will turn off and reboot to recovery mode. Press the Power and Volume up buttons at the same time and click the volume down button untill the blue shade is on apply update from adb. Click the power button. Type in your computer adb sideload followed by a space. Now open your Downloads folder and drag the ota zip image to the cmd window. Wait for a while, As your phone gets restored and it will not delete any data.
I hope this fixes your problem. If this helps, please click the Thanks button
I can't post links by the way so search for ota images for google pixel and click the first option
I searched and didn't see anything that relates to my specific problem.
I have a 1952-4 that I rooted per instructions on here (Magisk). I dropped it and broke the screen about 9 months ago and just fixed it today...and I can't remember my pattern. I'm up to 50 tries, so now I have to wait 120 seconds before it lets me try the next one.
Since the root process requires you to reboot recovery for root, doing that just sends it to the normal lock screen. When I hit Vol Down/Power, my options on the bootloader screen are:
-Start
-Restart Bootloader
-Recovery Mode (restarts it, sends to lockscreen)
-Power Off
-Factory Mode (restarts, sends to lockscreen)
-Barcodes
-BP Tools (restarts, back to lockscreen)
-QCOM (restarts, back to lockscreen)
-Bootloader Logs
-Switch Tools Mode (enables/disables "Tool Mode Config" option on the bootloader screen)
My computer beeps the "something USB has been plugged in" chime when I connect it, but it doesn't pull up in File Explorer (unless it's off, but just shows that a USB drive has been connected but won't pull up anything when I click on it), nor can I connect through ADB. It's not a cable/USB port issue either as ADB finds my Note 8 when I plug it in and check via "adb devices."
Can't wipe it via Find my Phone either because it's been 270 days since my account pinged the phone, so it just shows up as "Android" device.
Any suggestions on how to either get my computer/ADB to recognize it (with root) so I can just delete the lock database, or how I can factory reset it? Am I forgetting a reboot option?
Thanks in advance.
veryspecialagent said:
I searched and didn't see anything that relates to my specific problem.
I have a 1952-4 that I rooted per instructions on here (Magisk). I dropped it and broke the screen about 9 months ago and just fixed it today...and I can't remember my pattern. I'm up to 50 tries, so now I have to wait 120 seconds before it lets me try the next one.
Since the root process requires you to reboot recovery for root, doing that just sends it to the normal lock screen. When I hit Vol Down/Power, my options on the bootloader screen are:
-Start
-Restart Bootloader
-Recovery Mode (restarts it, sends to lockscreen)
-Power Off
-Factory Mode (restarts, sends to lockscreen)
-Barcodes
-BP Tools (restarts, back to lockscreen)
-QCOM (restarts, back to lockscreen)
-Bootloader Logs
-Switch Tools Mode (enables/disables "Tool Mode Config" option on the bootloader screen)
My computer beeps the "something USB has been plugged in" chime when I connect it, but it doesn't pull up in File Explorer (unless it's off, but just shows that a USB drive has been connected but won't pull up anything when I click on it), nor can I connect through ADB. It's not a cable/USB port issue either as ADB finds my Note 8 when I plug it in and check via "adb devices."
Can't wipe it via Find my Phone either because it's been 270 days since my account pinged the phone, so it just shows up as "Android" device.
Any suggestions on how to either get my computer/ADB to recognize it (with root) so I can just delete the lock database, or how I can factory reset it? Am I forgetting a reboot option?
Thanks in advance.
Click to expand...
Click to collapse
In Bootloader
factory reset with
Code:
fastboot -w
fastboot reboot
sd_shadow said:
In Bootloader
factory reset with
Code:
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
I'm on the bootloader screen (PWR/Vol-)
Computer does not show it connected, either in FIle Explorer or ADB.
veryspecialagent said:
I'm on the bootloader screen (PWR/Vol-)
Computer does not show it connected, either in FIle Explorer or ADB.
Click to expand...
Click to collapse
Window 10?
Yeah. It should remember this phone, since I used this computer to root it when I first got it a year and a half ago.
I used a different cable and got it to pick up the phone (as an unknown device) in Windows but NOT ADB, and the phone to realize it was connected (see last line on phone screen) but they're not talking.
If I boot it all the way up, either regular or recovery (root), it doesn't show at all on my computer.
Like I said, I'd be fine with wiping it, but can't even get to that option.
Install the moto drivers. If that doesn't work then make sure your using a usb2 port and not a usb3 port as its a known issue with moto phones.
I just ordered a new OEM cable.
Also ordered an OTG cable to see if I can force it to startup into a different mode that'll allow me to do something with it.
I'll update this thread once I'm able to test them out.
I got a new cable. My USB ports are not labeled, and my Moto drivers reinstalled.
After rebooting to the recovery screen, I plugged it in and apparently I have fastboot. I checked the bootloader logs and it says:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Volume down key pressed
USB connected
Windows doesn't pick up anything connected by USB. I can't restart to get root because then adb doesn't pick up the phone either because of the screenlock preventing me from hitting ok to trust my computer.
I'm asking the following because I can't find answers: Can you delete the screen lock file with the only bridge being fastboot, not adb. How can I do a factory reset if rebooting to recovery is our normal way of turnin gon the device with root access? Or would reflashing something work?
command line commands are a perishable skill and it's been a couple years since I did this stuff.
Thanks in advance.
To recap, I either need to be able to get into the directory to delete the pattern lock, or factory reset the phone.
I've tried the pattern lock 79 times, which means I have to wait 300+ seconds between tries. I think an error is causing that though.
Fastboot is my only option at this point as far as using commands goes. Rebooting recovery just reboots it with root permissions, but neither adb or Windows 10 picks it up. Using a brand new factory cord and tried every USB port on my computer, even the USB-C to USB-C. But I can't find anywhere that shows how to get into the directory using fastboot.
In Device Manager, I've been getting an error with Android ADB Interface (The device cannot start; Code 10). I uninstalled, reinstalled various drivers, killed adb.exe, etc., Still happening.
HOWEVER, Motorola ADB Interface is working just fine and goes away when I unplug my phone, returns when I plug it in. Only when it's in recovery/fastboot mode though.
I got into Safe Mode, but computer won't pick it up.
I can't get into Field Test Mode. I did reboot it into something else. I don't know what, but the screen was off and the home button was illuminated. EDL mode? I don't know. Neither my computer or adb read that anything was attached, and i can't figure out how I did it.
I also tried sideloading some pattern lock removers, but apparently you can't do that in fastboot.
Thoughts?
Just to close this out with a solution: I had forgotten that in order to get to the recovery menu, you have to hold the buttons when you reboot recovery. Didn't realize that until I was rooting my Moto e6.
Factory reset complete. No more pattern lock. Though since I've now tried rooting it 4 times with 4 different images and have not succeeded even though I had root before all this, I wish I could have realized the above and possibly gotten in and deleted the gesture.
Lesson learned.
Hold what buttons? I'm afraid I'm in same spot.
onefstfoknv6 said:
Hold what buttons? I'm afraid I'm in same spot.
Click to expand...
Click to collapse
Volume up button and power button
sd_shadow said:
Volume up button and power button
Click to expand...
Click to collapse
Just found this. Timing is everything apparently.
Press and hold the Volume Down and Power buttons simultaneously until the Android Recovery screen appears.
Press the Volume Down button to navigate to Recovery.
With Recovery displayed, press the Power button.
When you see the 'Droid' with 'No Command,' hold Power and tap Volume Up just once and immediately release both buttons.
Scroll to wipe data/factory reset by pressing the Volume Down button
Press the Power button.
Scroll to YES by pressing the Volume Down button.
Press the Power button.
The 'phone will wipe all contents.
Press the Power button.
The 'phone will now reboot to the initial setup screen.