have a gs3 that was on 4.1.2, it is rooted and had a custom recovery but stock rom. i started the ota update which i assume was 4.4.2 took about 30-40mins to download then not thinking i started the process but failed cause i had a custom recovery. so i used the tool kit and put the stock recovery back on the phone. now i cant get it to show the ota update, just says system up to date. ive tried factory resetting. ive tried changing the date on the phone, all that does it says connecting to dm server. will it not download that update again since it downloaded it once or whats going on? just want the stock 4.4.2 on the phone.
superhtchd2 said:
have a gs3 that was on 4.1.2, it is rooted and had a custom recovery but stock rom. i started the ota update which i assume was 4.4.2 took about 30-40mins to download then not thinking i started the process but failed cause i had a custom recovery. so i used the tool kit and put the stock recovery back on the phone. now i cant get it to show the ota update, just says system up to date. ive tried factory resetting. ive tried changing the date on the phone, all that does it says connecting to dm server. will it not download that update again since it downloaded it once or whats going on? just want the stock 4.4.2 on the phone.
Click to expand...
Click to collapse
You might try KIES. That's how I upgraded from a rooted stock JB, to stock KitKat (unrooted)
Or follow enewman17's thread in the General section.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
Related
I'm currently running beanstalk 4.4.1 rooted with twrp installed. I did the 4.3 OTA update before I went with the custom roms.
what is my options as far as going back to stock 4.3? I've read several threads but non of them were the exact scenario that im in. Any help is appreciated.
Are you running an AT&T phone? If you are, you cannot flash any rom that tries to flash a bootloader that is older than 4.3. If you do, it will brick the phone.
audit13 said:
Are you running an AT&T phone? If you are, you cannot flash any rom that tries to flash a bootloader that is older than 4.3. If you do, it will brick the phone.
Click to expand...
Click to collapse
yes it is at&t. Also I do have my original backup but twrp doesn't recognize it
Why not load a 4.3-based ROM? If you want to go back to stock, you could try using mobile Odin to load a stock ROM.
Dear Experts, Need your help.
Look at the attached pictures.
I successfully flashed official 4.4.2 (M919UVUFNB4) through OTA
Since then I had google play store issues. "Could not communicate with google severs" for more than 2 days.
So I decided to get the stock 4.4.2 reinstalled. But it would need Stock 4.3 to allow OTA 4.4.2 to pop.
* So tried to go back to stock 4.3 using ODIN. This is where things got messed up.
* ODIN downgrade failed. Could not boot
* So I flashed OUDHS-Recovery-jfltetmo-1.0.3.3.tar using ODIN. Successfully flashed and booted.
* Installed CWM recovery 6.0.4.4
* Flashed "jfltetmo_M919UVUEMK2_Stock_Deodexed.zip" successfully and booted.
* Tried to go back to stock 4.3. Failed again.
Right now my phone is working without any issues with deodexed 4.3. Look at the attached pictures.
Let me know how can I get back to Stock 4.3
or
how can I update my phone to Stock 4.4.2
Appreciate your help!
c_arivazhagan said:
Dear Experts, Need your help.
Look at the attached pictures.
I successfully flashed official 4.4.2 (M919UVUFNB4) through OTA
Since then I had google play store issues. "Could not communicate with google severs" for more than 2 days.
So I decided to get the stock 4.4.2 reinstalled. But it would need Stock 4.3 to allow OTA 4.4.2 to pop.
* So tried to go back to stock 4.3 using ODIN. This is where things got messed up.
* ODIN downgrade failed. Could not boot
* So I flashed OUDHS-Recovery-jfltetmo-1.0.3.3.tar using ODIN. Successfully flashed and booted.
* Installed CWM recovery 6.0.4.4
* Flashed "jfltetmo_M919UVUEMK2_Stock_Deodexed.zip" successfully and booted.
* Tried to go back to stock 4.3. Failed again.
Right now my phone is working without any issues with deodexed 4.3. Look at the attached pictures.
Let me know how can I get back to Stock 4.3
or
how can I update my phone to Stock 4.4.2
Appreciate your help!
Click to expand...
Click to collapse
Wrong section man but you can't update to stock 4.4.2 w/o the .tar (unreleased atm) and you can't go back to stock 4.3 because of Knox. All you can do is flash a 4.4.2 custom ROM and wait for the .tar for 4.4.2 to be released.
nivekx9 said:
Wrong section man but you can't update to stock 4.4.2 w/o the .tar (unreleased atm) and you can't go back to stock 4.3 because of Knox. All you can do is flash a 4.4.2 custom ROM and wait for the .tar for 4.4.2 to be released.
Click to expand...
Click to collapse
Thank you!. I am not an expert. Who creates the tar file and what decides its due?
c_arivazhagan said:
Thank you!. I am not an expert. Who creates the tar file and what decides its due?
Click to expand...
Click to collapse
Samsung
You can try this: http://forum.xda-developers.com/showthread.php?t=2679913. It's a completely stock flashable zip.
I will say that I haven't tested it yet (will do so later), and the Dev warns that things might break. So you have been warned. But if you're already on the 4.4 boot loader from the OTA update, its worth a shot. Just make a nandroid so that if you get any errors you can go back to what you have now.
jdcnosse said:
You can try this: http://forum.xda-developers.com/showthread.php?t=2679913. It's a completely stock flashable zip.
I will say that I haven't tested it yet (will do so later), and the Dev warns that things might break. So you have been warned. But if you're already on the 4.4 boot loader from the OTA update, its worth a shot. Just make a nandroid so that if you get any errors you can go back to what you have now.
Click to expand...
Click to collapse
Thank you. I tried it. It went into boot loop. I switched back to deodexed 4.3
Ari
c_arivazhagan said:
Thank you. I tried it. It went into boot loop. I switched back to deodexed 4.3
Ari
Click to expand...
Click to collapse
Good to know, hopefully I won't have the same problem but who knows. It's annoying to me that I don't have a way to completely start fresh but that's what happens I guess when you jump the bandwagon so early lol
c_arivazhagan said:
Dear Experts, Need your help.
Look at the attached pictures.
I successfully flashed official 4.4.2 (M919UVUFNB4) through OTA
Since then I had google play store issues. "Could not communicate with google severs" for more than 2 days.
So I decided to get the stock 4.4.2 reinstalled. But it would need Stock 4.3 to allow OTA 4.4.2 to pop.
* So tried to go back to stock 4.3 using ODIN. This is where things got messed up.
* ODIN downgrade failed. Could not boot
* So I flashed OUDHS-Recovery-jfltetmo-1.0.3.3.tar using ODIN. Successfully flashed and booted.
* Installed CWM recovery 6.0.4.4
* Flashed "jfltetmo_M919UVUEMK2_Stock_Deodexed.zip" successfully and booted.
* Tried to go back to stock 4.3. Failed again.
Right now my phone is working without any issues with deodexed 4.3. Look at the attached pictures.
Let me know how can I get back to Stock 4.3
or
how can I update my phone to Stock 4.4.2
Appreciate your help!
Click to expand...
Click to collapse
There is a way to get a fresh install of the 4.4 NB4 OTA. We've been using the process for the I337 for a while now since AT&T stopped releasing the full tar files. I recently picked up a used M919 for the unlocked bootloader and have been able to follow the same procedure to get the fresh re-install of NB4.
I will put together the needed files and post a link but all thats needed is to place the OTA zip in your ext sd card and then flash the MK2 system, modem, recovery, and cache images using odin. The phone will not boot at this point but you then go into recovery and flash the OTA zip from there.
muniz_ri said:
There is a way to get a fresh install of the 4.4 NB4 OTA. We've been using the process for the I337 for a while now since AT&T stopped releasing the full tar files. I recently picked up a used M919 for the unlocked bootloader and have been able to follow the same procedure to get the fresh re-install of NB4.
I will put together the needed files and post a link but all thats needed is to place the OTA zip in your ext sd card and then flash the MK2 system, modem, recovery, and cache images using odin. The phone will not boot at this point but you then go into recovery and flash the OTA zip from there.
Click to expand...
Click to collapse
Nevermind, the NB4 full odin tar is now available on sammobile.
muniz_ri said:
Nevermind, the NB4 full odin tar is now available on sammobile.
Click to expand...
Click to collapse
Yes, thank you.
Ari
I am on a rooted stock ROM 4.1.2 (LDMF1) on an i747m.
Can someone point me to an upgrade procedure to KK?
desirus said:
I am on a rooted stock ROM 4.1.2 (LDMF1) on an i747m.
Can someone point me to an upgrade procedure to KK?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1725839 is full of ressources.
What exactly are you trying to do? Get the official update or flash a custom rom?
If you want the official, remove root and install the OTA (you can use towelroot afterward to root).
If you want a custom rom, follow the FULL instructions in the rom's OP that you choose.
BWolf56 said:
http://forum.xda-developers.com/showthread.php?t=1725839 is full of ressources.
What exactly are you trying to do? Get the official update or flash a custom rom?
If you want the official, remove root and install the OTA (you can use towelroot afterward to root).
If you want a custom rom, follow the FULL instructions in the rom's OP that you choose.
Click to expand...
Click to collapse
Thank you
I want to the official ROM for KK, which I can find.
OK so from what you said the first thin I do is unroot? I will research that.
I was wondering if I can go direct from 4.1.2 to 4.4.2?
I would use ODIN on my PC?
Do I have to do any sort of backing up ( I have Titanium pro) before hand, restore procedures?
desirus said:
Thank you
I want to the official ROM for KK, which I can find.
OK so from what you said the first thin I do is unroot? I will research that.
I was wondering if I can go direct from 4.1.2 to 4.4.2?
I would use ODIN on my PC?
Do I have to do any sort of backing up ( I have Titanium pro) before hand, restore procedures?
Click to expand...
Click to collapse
Tibu is my fav backup app, just make sure you don't restore system app/data. Just make a batch backup and restore once you've flashed KK.
Unroot can be done directly in SuperSU (app).
Yes you can go directly to KK (or any other version), just don't downgrade once you'll have the 4.3+ bootloader or you'll brick your device.
And yes, use Odin on your PC, mobile Odin doesn't flash bootloaders.
The entire process is fairly simple. Just gotta be patient
galaxy S3 AT&T: from stock 4.1.2 to 4.4.2
I am new to these forms, please help me with my questions.
I have a smartphone SGS III AT&T. It is unlocked and working perfect with:
ROM: 4.1.2 Stock
Baseband: DMG2
Kernel: 3.0.31-1300972
Build Number: JZO54K.I747UCDMG2
I am not in USA, so my Smartphone is unlocked.
Initially I used the *#197328640# commands to unlock it
I want to apply enewman17 thread http://forum.xda-developers.com/showthread.php?t=2789917 to upgrade to 4.4.2
My questions are:
1. When the procedure is finished, the smartphone still unlocked?
2. If it became locked, is there a free procedure to release it again?
regards
franzrocamolina said:
I am new to these forms, please help me with my questions.
I have a smartphone SGS III AT&T. It is unlocked and working perfect with:
ROM: 4.1.2 Stock
Baseband: DMG2
Kernel: 3.0.31-1300972
Build Number: JZO54K.I747UCDMG2
I am not in USA, so my Smartphone is unlocked.
Initially I used the *#197328640# commands to unlock it
I want to apply enewman17 thread http://forum.xda-developers.com/showthread.php?t=2789917 to upgrade to 4.4.2
My questions are:
1. When the procedure is finished, the smartphone still unlocked?
2. If it became locked, is there a free procedure to release it again?
regards
Click to expand...
Click to collapse
Unlock is "permanent". You shouldn't lose root but everything you do is at your own risk.
AT&T I747 from 4.1.2 to 4.4.2 Perfect procedure
BWolf56 said:
Unlock is "permanent". You shouldn't lose root but everything you do is at your own risk.
Click to expand...
Click to collapse
BWolf56...you are right!!!
Ran all procedure http://forum.xda-developers.com/show....php?t=2789917.
My I747 AT&T is now in 4.4.2. No problems at all. Still Unlocked.
One point more:
When I was in 4.1.2 Stock, I was not able to use "USB Theter" because I am not with AT&T SIM Card. With this version I can USB Theter without restriction.
unrooted 4.1.1 won't update dead android
My AT&T SG3 was rooted until yesterday with stock 4.1.1. I unrooted, re flashed stock image and stock recovery. The phone status says "Normal" now so I think I successfully unrooted. When I try to do the OTA after downloading, it goes to a screen which says installing then updating with an incremental percent counter. When it reaches about 29%, it just reboots and comes back with "Install Interrupted The software update could not be installed". When I do "adb reboot recovery" from a command window, I see a dead android with a red triangle and I assume that has something to do with it or is some kind of symptom. Is there anything I can do to get the latest stock image installed? Did I miss something in the unroot process?
SGH-I747 4.1.1 1747UCDLK3
hannahse said:
My AT&T SG3 was rooted until yesterday with stock 4.1.1. I unrooted, re flashed stock image and stock recovery. The phone status says "Normal" now so I think I successfully unrooted. When I try to do the OTA after downloading, it goes to a screen which says installing then updating with an incremental percent counter. When it reaches about 29%, it just reboots and comes back with "Install Interrupted The software update could not be installed". When I do "adb reboot recovery" from a command window, I see a dead android with a red triangle and I assume that has something to do with it or is some kind of symptom. Is there anything I can do to get the latest stock image installed? Did I miss something in the unroot process?
SGH-I747 4.1.1 1747UCDLK3
Click to expand...
Click to collapse
I'm in the exact same boat. I was rooted with stock rom and recovery previously. No matter what I've done, it always fails.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Yellow triangle did not solve problem
hannahse said:
My AT&T SG3 was rooted until yesterday with stock 4.1.1. I unrooted, re flashed stock image and stock recovery. The phone status says "Normal" now so I think I successfully unrooted. When I try to do the OTA after downloading, it goes to a screen which says installing then updating with an incremental percent counter. When it reaches about 29%, it just reboots and comes back with "Install Interrupted The software update could not be installed". When I do "adb reboot recovery" from a command window, I see a dead android with a red triangle and I assume that has something to do with it or is some kind of symptom. Is there anything I can do to get the latest stock image installed? Did I miss something in the unroot process?
SGH-I747 4.1.1 1747UCDLK3
Click to expand...
Click to collapse
I spent several hours on this again today. I thought I had discerned the fix when I found a post showing the custom download count on the download screen and references to the yellow triangle program to reset it. I rerooted the phone, put stock recovery back, zeroed out the counter with yellow triangle, put the stock image back with ODIN, factory reset, and ended up with an unrooted phone with zero count. The download screen now says:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE (in light Grey)
I thought that would do it but the OTA still fails and I still see the red triangle on the stock recovery page. The only thing I can think of now is that SuperSU is still on the phone. It is disabled but still has 12KB of data that I don't know how to clear. I used the stock image from the skipsoft Android Toolkit.
Any ideas would be really appreciated.
I would steer clear of the toolkit. Follow enewman17's how to update thread in the General section. Seems to have a pretty good success rate.
get KK 4.4.2 in your AT&T SG3 without OTA
BWolf56 said:
Unlock is "permanent". You shouldn't lose root but everything you do is at your own risk.
Click to expand...
Click to collapse
hannahse said:
My AT&T SG3 was rooted until yesterday with stock 4.1.1. I unrooted, re flashed stock image and stock recovery. The phone status says "Normal" now so I think I successfully unrooted. When I try to do the OTA after downloading, it goes to a screen which says installing then updating with an incremental percent counter. When it reaches about 29%, it just reboots and comes back with "Install Interrupted The software update could not be installed". When I do "adb reboot recovery" from a command window, I see a dead android with a red triangle and I assume that has something to do with it or is some kind of symptom. Is there anything I can do to get the latest stock image installed? Did I miss something in the unroot process?
SGH-I747 4.1.1 1747UCDLK3
Click to expand...
Click to collapse
I did the same than you and also what n01un0 says but couldn't get OTA update to 4.3 or 4.4.2.
If you want the 4.4.2 in your S3, follow enewman17's http://forum.xda-developers.com/showthread.php?t=2789917 Thread.
It worked perfect for me from 4.1.2 stock to 4.4.2. The final result is the same that you get by OTA (if OTA works)
unrooted 4.1.1 won't update dead android - solved
hannahse said:
My AT&T SG3 was rooted until yesterday with stock 4.1.1. I unrooted, re flashed stock image and stock recovery. The phone status says "Normal" now so I think I successfully unrooted. When I try to do the OTA after downloading, it goes to a screen which says installing then updating with an incremental percent counter. When it reaches about 29%, it just reboots and comes back with "Install Interrupted The software update could not be installed". When I do "adb reboot recovery" from a command window, I see a dead android with a red triangle and I assume that has something to do with it or is some kind of symptom. Is there anything I can do to get the latest stock image installed? Did I miss something in the unroot process?
SGH-I747 4.1.1 1747UCDLK3
Click to expand...
Click to collapse
I solved my problem by a convoluted process that I could not recommend but will lay out as best I can in case anyone is that desperate. I had re-rooted and un-rooted a couple times since my last post and finally decided to try a different stock image. I found a link to one in an article
how-to-unroot-att-galaxy-s3-sgh-i747 (sorry - not allowed to post URL)
The link is to stockroms.net. Really slow download - it took a couple hours. After the download (and unzip),
I attached my unrooted phone via USB cable to my computer.
Installed it with ODIN and watched the phone reboot
It seem to get stuck on the Samsung splash screen.
I went into recovery mode and noticed that - at last - I did not have the red triangle and no dead android. I tried wiping the cache a couple times from the recovery screen but it still seemed to get stuck at the splash screen (not sure if I waited long enough).
I finally did the factory reset from the recovery and it finally came back to life and went through the whole initialization thing. I confirmed a couple times that the red triangle was gone and noted that I had gone from Android version 4.1.1 to 4.04. Maybe that was the key or maybe I had a bad stock version of 4.1.1. IDK. But I started going through a series of updates. I am currently at version 4.3 and downloading what I hope will be the last update.
Started with 4.1.1 and used outdated stock image to go back to
4.04 - small update but version still
4.04 - cleared data from AT&T Update App to get around the wait 24 hours - got the update installed to version
4.1.2 - checked for update and got upgraded to
4.3 - check for update wanted me to wait 24 hours and I could not see how to clear the data - so changed the phone's date to next day. Automatically started downloading a new update - I'm hoping its the last
My galaxy siii was rooted before kitkat was out, and I have been using it until now and have not yet update to KitKat yet because AT&T is not part of it any more.
How do I get KitKat on my phone? Do I have to unroot the phone and put it back into AT&T mode to download or what should I do?
this might help.
remember:READREADREAD
BACKUPBACKUPBACKUP
http://forum.xda-developers.com/showthread.php?t=1802160
good luck
err on the side of kindness
You will need to unroot your phone and have the stock recovery.
Thank you for both replies gentleman
audit13 said:
You will need to unroot your phone and have the stock recovery.
Click to expand...
Click to collapse
I might add to this...if you removed any stock carrier or vendor apps from 4.3 while being rooted...you'll have to restore them via a Titamium Backup or some other way or the OTA update will not install properly. (I realized that the OTA update from 4.3 to 4.4.2 will patch these apps to update them to 4.4.2 compatibility)
If you can't do that or if its unreasonable to do that based on the way the phone was modified while rooted...I suggest flashing the stock 4.3 rom via Odin and then take the OTA.
Id recommend flashing the 4.3 firmware via Odin to begin with. Its starting to seem like a lot of people who even just have to unroot are having problems with the ota. I think Odin flashing stock 4.3 will give the best chance of a successful update.
mwrobe1 said:
I might add to this...if you removed any stock carrier or vendor apps from 4.3 while being rooted...you'll have to restore them via a Titamium Backup or some other way or the OTA update will not install properly. (I realized that the OTA update from 4.3 to 4.4.2 will patch these apps to update them to 4.4.2 compatibility)
If you can't do that or if its unreasonable to do that based on the way the phone was modified while rooted...I suggest flashing the stock 4.3 rom via Odin and then take the OTA.
Click to expand...
Click to collapse
I am having this issue. I rooted on 4.3 and removed Google books and newsstand. I then uprooted and did a factory reset , so everything in download mode says "official" but the apps were still missing so I downloaded them from the play store. My question is will this let me get the OTA now or do I have to push the apps to the /system directory somehow? Also if I flash the 4.3 ODIN tar file, will it trip my warranty bit? It's at 0 right now and want to keep it that way until my warranty is up.
The firmware shouldn't trip the bit, but I can't promise that. Im sure its confirmed one way or the other in its thread though.
As for those apps, they'd have to be system apps, so just installing normally won't help. More importantly though, they would also need to be the same version that was originally built into the firmware. The apps you mentioned have seen many updates and using the current versions will not work.
I got the phone 2 weeks ago and it came with 4.3 installed on it. Would I be able to use the current version and just push them to /system/app with titanium backup? I am trying to get the OTA without tripping any warranty or security measures.
Recently brought my GS3 I747M back to life from a hard brick... and I flashed it to stock 4.0.4 rom via odin when doing so.Would I be able to upgrade it directly to stock 4.4.2 using odin? Or do I need to upgrade it to earlier version first, like 4.1 and 4.3? (phone is already rooted, so cant do it thru OTA). Thanks!
You can flash it with odin, but will need to factory reset too.
sure worked, thanks!