Help? I may have bricked my ace 2 :( - Galaxy Ace II Q&A, Help & Troubleshooting

Okay, so first of I am using a Samsung Galaxy Ace 2, running MF1, and the latest version of the Paranoid android port for the ace 2. CPU is clocked to 1100mhz. I was playing a game just now when suddenly the phone switched off by itself.
When I tried to boot it up again the boot animation was flickering and after which the phone just died, blackscreen.
I am unable to boot into recovery, the phone just shows a black screen but I am able to boot into download mode.
Is this considered a brick? Any help would be appreciated.

You can check out my thread.
You should try to install LK6 or MG2 rom.
E: or first, the kernel : Chrono kernel for ODIN

http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8
Flash full 3-parted FW with ODIN.

Related

[Q] Galaxy Note II GT-N7100 Won't Startup (Soft Bricked Please help)

Hello every one!
I have a problem with my Galaxy Note II N7100. I was trying to install a custom rom but ended up in a boot loop.
here is what happened:
First I rooted my phone with a Galaxy Note 2 Toolkit V3.0.0
after rooting i noticed that when i try to go to recovery my screen splashes, flickers for some time and goes blank. And some times it keeps doing this infinitely.
Then i installed TWRP latest version but it didn't fixed the problem. After trying several option i some how went into the TWRP recovery and installed a custom ROM but my phone did not booted. Same screen flickering problem.
I decided to flash a stock rom ALJ2 (which was the stock rom when i bought the phone)
I flashed the stock rom, now the problem is my phone goes into boot loop and wont start.
Now my phone dont start up.
It has binary counter raised to 4 (Can't use triagle away because phone can not boot)
I dont have any recovery but my phone can access downloading mode.
if i flash any stock rom it just goes to boot loop. (i tried ALJ2 & DLK7)
I tried USB Jig method but it did not reset my binary counter to zero.
Any help will be much appreciated, as my phone is brand new and still under warranty.
Regards,
Does a red light glow when you start the phone ?
Sent from my GT-N7100
I'm using Philz recovery, if this thing happened on me, I would do a full wipe through recovery... and flash back stock ROM/custom ROM again...
Sent from my GT-N7100 using xda premium
Thank you Guys for your help.
I got a work around for the situation.
i Flashed stock ROM ALJ2
but phone did not booted
anyways i flashed CMW recovery
phone booted into the recovery...
then i flashed a custom ROM LiquidSmooth JB 2.1 RC1
and walaaa....
my phone is up and running again...
Galaxy Note 2 (GT-N7100)
Hi Everyone!
I Just downloaded apps that can switch internal sd card to external sd card and I have to update the kernel and when I reboot my phone it didn't start up and end up my phone don't work..pls help, i'm not good when it comes to technology..
thank you and Godbless!!

[Q] SPH-L900 wont boot issues

So I was running 4.3 and was rooted on my note 2 on sprint. I had SuperSU and I did a unroot so I could upgrade to 4.4 I unrooted then rebooted then installed 4.3 then things started to go bad. I can get to download mode, but it wont boot past Smasung GALAXY Note II splash screen. Can't even boot to recovery mode. I have used ODIN to flash CWMR, TWRP, stock rom. And nothing works, if the image has a sboot.bin file, ODIN fails everytime. When I flash to correct stock rom ODIM passes but when it boots it boots to the a firmware update error but Samsungs kies just says connecting ... and doesn't ever connect. I don't know if i hard-bricked or soft-bricked my note 2 or if I am just doing something wrong. PLEASE help me I miss my phone lol.

[Q] Ace II bricked, can only boot in odin mode

Hello,
today I tried to install the new cyanogenmod 11.0 rom on my ace II (I8160), but I ended up bricking it.
At first I rooted it and it still worked ok, then I installed a custom recovery and used it to install this rom: http://forum.xda-developers.com/showthread.php?t=2555021 . It worked but I wasn't able to make or receive phone calls. So next I tried to go back to stock by using odin to flash the original rom (I8160XXLH3_I8160OXXLH2_ITV, which should be italian gb) but now the phone won't boot anymore.
Currently, I can still get the phone to boot in odin mode and I can flash any stock rom, but I can't boot it in recovery mode or in normal mode. When I try to do so, the phone just stops at the screen with "Samsung GALAXY Ace 2 GT-I8160" written on it.
Do you know a way to get it to boot normally or should I just buy a new phone?
Nevermind I fixed it by installing the following files via odin:
PIT: GT-I8160_EUR_XX_4G.pit
AP: CODE_I8160XXMB4.tar
CSC: CSC_OXA_I8160OXAMB4.tar
and then installing a stock 4.1.2 rom

[Q] Cant flash custom kernel

Hi, im trying to flash the perseus alpha 3.36 kernel but for some reason whenever I try to install it I get a black screen on boot, or boot loop on device name logo, to fix it i simply load up my nandroid backup.
I've tried installing it via odin:
Once it finishes installing it says Pass with a green background but when it resets , bootloop/blackscreen
I've tried installing it via twrp using a kernel changer from the assassin ressurection custom rom thread.
Oh and 1 important detail: I'm using stock rom (rooted)
I did check see someone saying they got it to work on there phone using a stock rom, so why cant I?
ThanQ
after flashing and the bootloop / black screen can you still get to recovery ?
i copped this a few times when i first had android on my i9000 turned out although designed for my phone the phone didnt like it, and had to use a different kernel.
if you can get into recovery try flashing it again
or get to d/l mode then with adb
adb reboot recovery

[HELP]Accidently flashed wrong CWM and now stuck on boot screen with no recovery mode

I have accidently flashed wrong CWM and now its stucked on boot screen (just showing SAMSUNG GALAXY GRAND DUOS). Even i tried to open the recovery mode but nothing happened, it just keep showing the same screen. Is there any way to flash the correct cwm via PC. Guys pls help
Device is already rooted with aicp rom installed.
Flash new recovery via odin, detailed guide below
http://www.ibtimes.co.uk/galaxy-grand-duos-i9082-root-android422-clockworkmod-499739
GSR1992 said:
I have accidently flashed wrong CWM and now its stucked on boot screen (just showing SAMSUNG GALAXY GRAND DUOS). Even i tried to open the recovery mode but nothing happened, it just keep showing the same screen. Is there any way to flash the correct cwm via PC. Guys pls help
Device is already rooted with aicp rom installed.
Click to expand...
Click to collapse
bro are stuck on boot logo (Samsung galaxy grand duos) if not booting in normal time ? if so (I had faced the same problem when flashed s duos's cwm via flashify ) you need to download official jelly bean 4.2.2 firmware from sammobiles.com or somewhere then flash it via Odin (by entering into download mode) hope it works

Categories

Resources