Related
I AM NOT RESPONSIBLE FOR ANY PROBLEMS YOU CAUSE!
So you are stumbling around XDA and you really want some kind of app or something, but you think you cant because you have a Mac, well I am here to tell you wrong.
The biggest and most used mistake for mac users when trying to use ADB is this:
HTML:
Inas-iMac:~ Hans$ /AndroidSDk/tools
-bash: /AndroidSDk/tools: is a directory
Inas-iMac:~ Hans$
Well this is how you do it!
Watch this!
http://www.youtube.com/watch?v=GLAMG4xU_lE
To make your phone go into debug mode go to settings/applications/development and check debug
DO NOT MOUNT PHONE! Just let it be
I did not go to deep into the process because this is made for complete beginners!
Why not follow the official SDK install instructions and add the path to bash_profile..
developer.android.com/sdk/installing.html#Installing
In my opinion that's not too hard for a newbie.. (i managed to do that) And after doing that you don't need to change directories with cd command, you can just type adb whatevercommand from your home dir which is the default location when you open the terminal.
Drag and drop is a little a fail.... one can add "alias" (linux can do it, probably mac too)
Little How-to:
Code:
$ nano ./bashrc
add and adapt the following line to bashrc:
Code:
alias adb="/home/carbonyle/android-sdk-linux_86/tools/adb"
now you just have to type "adb" from a terminal emulator to run it, eg:
Code:
$ adb shell
# reboot recovery
or
Code:
adb install ./Download/myFavortiteApp.apk
and so on...
ps: we don't need to "adb remount" at worst we can just "adb kill-server" then "adb start-server" if the device is not accessible
Hi,
I thought I'd add this here because I've recently starting using OSX after building my own hackintosh out of PC parts. I got very fed up with Windows and the need for drivers all over the shop so I'm moved over now.
I've also just got into flashing my HTC Desire and it was made very easy by lots of the guys here. One thing that will always be useful when rooting and flashing your phone is ADB. There are lots of guides out there for ADB on Windows but I wanted to run in natively in OSX.
After a lot of research and a few failed attempts .... I've now worked out how to run ADB in OSX.
What you will need:
A Mac
USB cable
Android SDK for OSX- http://developer.android.com/sdk/index.html
At the time of writing this the version was "android-sdk_r08-mac_86" so please have a look at the above link and let me know if you can't find that same version.
So download the zip file and I would extract it to a folder where you are happy to keep it such as within your user home folder i.e. Macintosh HD/Users/{Your User Name} and for my mac it is Users/siedkins which is how I have my OSX set up.
Then open then still in Finder, open "android-sdk-mac_86" then "tools".
Now launch Terminal - ⌘ + space then type Terminal or Applications>Utilities>Terminal
Now drag and drop the file called "android" in the "tools" folder into your terminal window and you should see something like:
/Users/siedkins/android-sdk-mac_86/tools/android
Then hit enter - this should load Android SDK
Next go to Available Packages on the left and Android Repository > Android SDK Platform-tools, revision 1 -tick the box and hit "Install Selected"
It should download and install the Platform Tools which includes ADB !!!!
Now quit Android SDK after it has downloaded and go back into Finder. Now you should see a new folder "platform-tools" in the "android-sdk-mac_86" folder. Open that and you can now see a file called adb.
Now .... I am going to show you how to make your life a lot easier in Terminal to run ADB without having to navigate to the folder every time you want to launch it.
Go back to your Terminal window and type (or copy & paste):
Code:
cd ~
The screen should then look like
NAME_OF_YOUR_MACHINE:~ USERNAME$
For me I have:
Mac-Pro:~ siedkins$
Next, type
Code:
touch .bash_profile
to create your new bash / path file
Next, type
Code:
open -e .bash_profile
to open it in TextEdit.
Now into Text Edit please copy:
Code:
export PATH=${PATH}:
Then go into Finder and navigate your your "android-sdk-mac_86" folder. Then click on the "platform-tools" folder and drag and drop this into TextEdit at the end of the code above that you copied. Mine looks like:
export PATH=${PATH}:/Users/siedkins/android-sdk-mac_86/platform-tools/
Yours should look like:
export PATH=${PATH}:insert your path to the "platform-tools" folder in your Android SDK here
All you need is that one line. Then Save and exit TextEdit and then very importantly QUIT TERMINAL.
***** If you have issues being able to save the file at all then please jump to the bottom of the post*****
Now ........ to turn on USB Debugging in your handset Settings > Applications > Development > USB Debugging - ticked and also go to Settings > Connect to PC > Default connection type > Charge Only and also UNTICK "Ask me ..." there also. You can always go back here and change these settings back.
Now plug in your phone to a USB port. I noticed that if I plugged my phone into one of the standard USB ports on the front of my machine I couldn't see the phone further down the line and if I plugged it into a powered USB port on the front (I have an "akasa AK-ICR-08" which has a powered connector behind the 5 USB ports. But you guys will probably be using a MacBook or MacPro and there shouldn't be any issues with the power to your USB ports.
Now to launch ADB - re-open terminal (remember that you had quit it - very important!) then type in:
Code:
adb devices
And you should see:
List of devices attached
HXXXXXXXXXX device
where XXXXXXXX is your unique phone ID.
Now you can run all of your favourite ADB commands straight by typing:
adb shell
etc straight into Terminal. I won't go into that here as there are plenty of guides about what to do with ADB once it's installed!
Now you have ADB setup on your Mac and can run it without the need for installing HTC Sync - un-installing it - loading some modified drivers over the top !!!!
It all just works !!!!!!
Please drop me a line if you have any queries about this !
******************
If you are have user account issues such as Terminal or TextEdit says that you can't do anything then try adding "sudo" to the front of your terminal command as this will allow you to execute the account as a superuser or root user for OSX! ROOT!!! Note that you will have to enter your password to enable the superuser access rights and you won't see anything as you type in your password.
i.e. try:
Code:
sudo touch .bash_profile
then
Code:
sudo /Applications/TextEdit.app/Contents/MacOS/TextEdit .bash_profile
(slight change in the coding here to ensure that TextEdit opens
Or you could do:
Code:
sudo pico .bash_profile
This will open up the Pico text editor instead of TextEdit. Here you will have to type out all of the text then you press "ctrl+x" to exit and then you can save on the next screen. To check that has worked you can then open the file in terminal again and check it with the normal command:
Code:
open -e .bash_profile
******************
Please see post #37 for How To Use ADB Over WIRELESS !!!!
************************************************************************
EDIT - 27th JAN 2010
FastBoot
I've now found you all a precompiled version of Fast Boot:
http://developer.htc.com/adp.html
Please download and unzip the precompiled version for OSX to your "SDK/platform-tools" folder.
Rename the unzipped file from "fastboot-mac" just to "fastboot". You need to fix the permissions of the fastboot file using CHMOD in Terminal.
In Terminal navigate to your "SDK/platform-tools" folder and then type:
Code:
ls
You should see all of the files in your "platform-tools" folder such as adb, aapt, fastboot, etc.
Then type:
Code:
chmod 777 fastboot
PLEASE NOTE THAT I AM ASSUMING THAT YOU HAVE CHANGED THE FILE NAME ABOVE !
Now with the permissions fixed you should be able to run fastboot.
Connect your phone via USB and set to "charging only". Then turn off your phone and leave the USB in. Then hold the back key and then turn your phone on again. You will have a white screen with 3 skateboarding androids on.
Now in Terminal type:
Code:
fastboot devices
And you should see your unqiue phone ID! (Note that you have to be at that white screen with the skateboarders for the "fastboot devices" code to run!
Now you have a fully working fastboot !!!
Sorry this explanation is a bit short - I did write out a longer one but my browser crashed and I lost it all. However if you cannot follow the above then I think it's maybe best that you don't use fastboot as you could seriously brick your phone.
NOTE - I HAVE NEVER USED FASTBOOT TO FLASH A RADIO OR PHONE SO I PROBABLY WON'T BE ABLE TO HELP IF YOU GET ERRORS IN USING FASTBOOT OR FLASHING YOUR DEVICE ! The above information is how to shortcut the navigation to the folder. Please don't blame me if you break the recovery image of your phone!
Thanks for such a thorough step by step guide. But Im having a problem I followed the directions and at the last step I get "permission denied". Any tips for me would be truly appreciated. Thanks
dhoshman said:
Thanks for such a thorough step by step guide. But Im having a problem I followed the directions and at the last step I get "permission denied". Any tips for me would be truly appreciated. Thanks
Click to expand...
Click to collapse
which last step ?
dhoshman said:
Thanks for such a thorough step by step guide. But Im having a problem I followed the directions and at the last step I get "permission denied". Any tips for me would be truly appreciated. Thanks
Click to expand...
Click to collapse
What version of MacOS? Also are you sure your device is properly rooted? I'm assuming you are getting the error when typing "adb devices"?
EDIT: That's what I get for being distracted while typing this.. ;-)
The easiest way to get the sdk is by using homebrew, which is an amazingly useful tool. https://github.com/mxcl/homebrew
Code:
brew install android-sdk
It doesn't add adb to your path however, you have to do that manually by adding /usr/local/Cellar/android-sdk/r8/platform-tools to your path.
Hope that makes it a little bit easier.
I found that on my mac using terminal I have to always start the adb commands with a ./ otherwise it wouldn't work right. This might be common knowledge for some, but I'm a terminal newbie
So, for example:
./adb devices
Thanks for the walk through
This work great. I put the the SDK folder on the root of Macintosh HD and renamed it to AndroidSDK. Then in the .bash_profile my path was /AndroidSDK/platform-tools/ . I then made a backup of my SD card with adb pull from /mnt/sdcard to my local machine.
mun-key said:
I found that on my mac using terminal I have to always start the adb commands with a ./ otherwise it wouldn't work right. This might be common knowledge for some, but I'm a terminal newbie
So, for example:
./adb devices
Click to expand...
Click to collapse
Kind of weird. To me that would mean that you're path variable isn't setup correctly. Usually the ./ before a command means to run the command from the current directory and ignore the path variable.
It doesn't even have to be this complicated. Download the sdk, whatever files you want to push to your phone put it in the same folder. Then do the commands (./adb push). Simple.
Great and easy tutorial! Got it working in 5min ^_^
madj42 said:
Kind of weird. To me that would mean that you're path variable isn't setup correctly. Usually the ./ before a command means to run the command from the current directory and ignore the path variable.
Click to expand...
Click to collapse
Ok - that makes sense now. And reading Krisrk's reply, that's exactly how I did it.
On my device I only needed to push a single file. Don't really need adb anymore. Your post was like 12-hours too late for me though. I spent 3 hours trying to figure out why it wouldn't work, then saw the ./ in a youtube video. After that I was rooted with a new rom in minutes
thanks for all the great info guys
Just wanted to thank you! I already had ADB working on my Mac OSX but didn't have the "environment variables" in the .bash_profile. So now I can just use adb commands directly without going into the finder and find the adb!
Also, kudos for the very detailed guide with your own examples, that reads very well!
Thanks for the comments guys.
I know that you can navigate to the SDK folder and just run it from there but I thought that people might like the above guide to do the shortcut once and then never have to jump around folders again in terminal which is a bit of a pain. Plus my method removes the need for the "./" prefix.
anyways I'm easy I'm sure that everyone will have their own preferred method if you already use adb on OSX
i cannot get beyond the command:
touch .bash_profile
the terminal returns permission denied. what do i need to add or what am i doing wrong?
What type of user account do you have set up in OSX?
System Prefs > Accounts
Also what about trying the following in Terminal
Code:
sudo touch .bash_profile
And then enter the password for your user profile?
Any better?
Thanks for this!!!!!
Nobody ever shows macs love.
Sent From My HTC Evo 4G Using Tapa Talk Pro!
siedkins said:
What type of user account do you have set up in OSX?
System Prefs > Accounts
Also what about trying the following in Terminal
Code:
sudo touch .bash_profile
And then enter the password for your user profile?
Any better?
Click to expand...
Click to collapse
it popped up and asked my password, then it said i entered the wrong one and i never was asked this again. this is incredibly frustrating as i cannot even get it to work in windows
edit: ok got to the part where i bring up text edit, but it will not let me save. states i do not have permission to save. is there a way i can turn off this password crap for the time being? all i want to do is push files to my phone, i can't even get this far
Ok...
I'm trying not to look stupid, but for gods sake, im stuck at the first command. I copy paste cd~ and nothing happens. press enter nothing. I've been reading up on terminal and i still feel quite stupid considering how im stuck on step one
edit: got it! I got lost going back into the same terminal and not closing the android sdk window. there fore I was still in the sdk and not telling the computer anything. a dur. Opening a new terminal and doing all of the steps did the trick. Thanks for this btw!
thanks for the detailed guide. i've been looking all over the web for a guide to setup adb for MAC. followed the steps here and now, i'm able to use ADB on my macbook. YAY!!
monstereo said:
thanks for the detailed guide. i've been looking all over the web for a guide to setup adb for MAC. followed the steps here and now, i'm able to use ADB on my macbook. YAY!!
Click to expand...
Click to collapse
Hey just a random note, nice prof pic stig ftw
This is a how-to to get ATT LG Optimus Pro rooted USING THE FILES PROVIDED BY FIDDY619 AS IN HIS POST FOR THE REGULAR OPTIMUS G here http://forum.xda-developers.com/showthread.php?t=2181103.
So the files are not mine, but the how to is !!!!!!!!!!!!!! Since some people complained about how to use these files on Linux here it is.
I am reproducing my post here:
Thanks to fiddy619 (OP) for the script and files !!
After some failures, I got my ATT LG Optimus G Pro E980 - got today - on Ubuntu. Here is what I had to change to get the linux script Root.sh to work.
YOU MUST HAVE ADB INSTALLED AND WORKING. Your 'adb devices' command in terminal must return a device number or you will get device not found. In Ubuntu, adb is as easy as just downloading and extracting the files and adding the prprper path: see here
http://ubuntuforums.org/showthread.php?t=1918512.
When editing your path dont forget to
$ sudo gedit ~/.bashrc
Then add to the end of the file...after last line:
export PATH=${PATH}:${HOME}/android-sdk-linux/tools:${HOME}/android-sdk-linux/platform-tools
CHANGE the 'tools' and 'platform-tools' folder path to what your file location is. You MAY not need to do the android rules bit if your phone mounts.
FOR UBUNTU:
1. Download and extract files to your favorite location. You need to remember and know the path to the location.
2. The Root.sh uses adb to push the files 'busybox', 'su' and 'superuser.apk' to the phone. HOWEVER, the location of these files depends n where you saved them on the computer.
3. Open Root.sh.
4. Find "$ADB push busybox /data/local/tmp/busybox" and change the first 'busybox' (underlined) to proper location of your file on your Ubuntu. Thus, for me I changed the line as follows:
$ADB push /home/MyUserName/Downloads/Root-Universal-linux/busybox /data/local/tmp/busybox
5. Do this for the followng lines also, changing location of 'su' and 'Superuser.apk' based on where it is on you compu.
$ADB push su /system/xbin/su
$ADB push Superuser.apk /system/app/Superuser.apk
6. Click save to save script file.
7. Put phone in 'Charge Mode' and connect to computer.
8. To run the script open terminal and
$ sudo sh '''drag and drop Root.sh file here"
Hit Enter.
9. Adb will start and it MUST say device found for you to proceed.
10. The next four lines -after 'device found' that show are INSTRUCTIONS FOR YOU. So disconnect phone >>> Disable Usb debugging >>> Enable USB debugging>>> Plug phone back in. ESSENTIALLY DISCONNECT PHONE AND ENABLE DEBUGGING AND THEN RECONNECT.
11. It will do some stuff and show:
uid=0(root), gid=0(root)
"If uid=0(root), gid=0(root) is displayed"
"Press Enter to Continue once phone is running"
"If uid=0(root), gid=0(root) is NOT displayed"
"Press Ctrl+c to quit"
The stuff in quotes again are INSTRUCTIONS. The line before it is what you should see to follow instructions: So if "uid=0(root), gid=0(root)" shows before the instruction set, you are good to go and can press 'enter'.
12. It will push the require busybox/su/etc files and change permissions and reboot. IF YOU GET ANY ERROR HERE ABOUT 'su' file not found, or 'busybox' file not found, then check Root.sh for that you entere the location of the files properly in step 4.
13. After rebooting you should see supersu installed.
Bravo!!!!
HIT THE THANKS BUTTON !!!!
DISCLAIMER
IM NOT RESPONSABLE FOR ANY BRICKED DEVICES
DEAD SD CARDS OR ANYTHING ELSE WHAT HAPPENED TO YOUR PHONE.
TRY AT YOUR OWN RISC
Q&A
Why should someone hack his MAC address?
- to hide his/her illegal activity
- he/her want to be anonymous
Does cracking my MAC address effect me and/or my phone in any case?
- yes you are about to change some part of your hardware (big problems if you are doing something wrong)
- note that routers with MAC white listing won't accept your phone anymore
UPDATE!
i found out that the easy way is not working probably in some cases.
Please use the new way it has the same result.
Prerequisites:
- a rooted phone of course
- any terminal emulator
- a little bit of your time (around 2 minutes)
New method
- disable wifi
- open up terminal
- type in "su" and grant root rights (IMPORTANT)
- now type in "dd if=/efs/wifi/.mac.info of=/sdcard/MAC"
- make a backup of the "MAC" file
- after that type "echo 1a:2b:3c:4d:5e:6f > /sdcard/MAC" (or your preferred new MAC)
- now give in "dd if=/sdcard/MAC of=/efs/wifi/.mac.info
- reboot phone ang be happy
New method 2
- disable wifi
- create a new folder on your sdcard called "efs"
- open terminal and grant root rights
- type in "umount /efs"
- give in "mount -t ext4 /dev/block/mmcblk0p11 /sdcard/efs
- now "cd /sdcard/efs"
- check if a folder named "wifi" exists with the command "ls -la"
- if so "cd /wifi"
- now "echo 1a:2b:3c:4d:5e:6f > /sdcard/MAC" (or your preferred new MAC)
- last thing "umount /sdcard/efs" (that will fail in some cases cause android does not support umount -f, reboot in any case)
- reboot phone and be happy
Easy way
- download the zip below and install it via recovery
- restart phone and open up terminal
- grant superuser rights (IMPORTANT)
- type in efs -d 1a:2b:3c:4d:5f:6e (or your preferred new MAC)
- type in efs -c
- reboot phone and be happy
For developers
Source code for the app will say enough I hope.
If not just post your question.
Downloads (most important thing)
Code:
source code:
https://mega.nz/#!uRNwjAQQ!I4txz5rCwBPFQuQYBhRg5vG50lMTFrV9SGme_PasZIY
flashable zip:
https://mega.nz/#!CZF2nYDZ!a7f8DegsYwLwfMuRtDkTDxY3OtO4jsWw6BAXZC9f1bs
Please backup your EFS partition before doing this...
ali salem
I've done have been installed and the file over Ricaffre ..lkn you did not understand something else .. and I hope to respond quickly because the Wi-Fi did not work and I hope the explanation pictures so I know what to do ?
Hi did you have a Samsung device? If so follow this link
http://forum.xda-developers.com/and...pp-nmac-nil-mac-changer-t3391283?goto=newpost
Thread moved
I'm running on the 10.5.10.IN11BA build.
Just get a command shell to your OnePlus 8 Pro through adb, no need for the device to be rooted or anything.
Once you get there, just type:
Code:
am start -n com.oneplus.factorymode/.camera.manualtest.CameraManualTest
It will launch the FactoryMode app and get you directly to the manual camera test view.
Just press the bottom right icon until you get to the color filter.
I have no doubt there is easier and quicker ways to get the same result, maybe through an apk.
Edit:
As far as I know, this workaround could work on any OnePlus 8 Pro model.
Also, as pointed out by ster88, you also can take videos with the filter, which was not possible with the camera app.
I tried not working. I used th terminal app from google playstore.
Can u specifically provide which app and where.
And anything to enable on developer mode.
sajjadhussaini said:
I tried not working. I used th terminal app from google playstore.
Can u specifically provide which app and where.
And anything to enable on developer mode.
Click to expand...
Click to collapse
Sure !
To enable developper mode, go to "Settings > About phone" and tap the "Build number" until they tell you have developper mode enabled.
Then go to "Settings > System > Developper options" and under "Debugging" enable "USB Debugging" and "Wireless ADB Debugging".
Once that is done, on your computer, download the platform-tools, containing adb here :
Code:
https://developer.android.com/studio/releases/platform-tools
Once it is downloaded, go inside it with your command line.
If you are doing this wirelessly, get your phone IP address and type:
Code:
adb connect <your-phone-ip-address>
Then if it worked, to know what the transport id of our device is, type :
Code:
adb devices -l
Once you have the transport id, type this to get a shell to your phone:
Code:
adb -t <transport-id> shell
You can get more details on how adb works here:
Code:
https://developer.android.com/studio/command-line/adb
Then when you have access to the shell, just type:
Code:
am start -n com.oneplus.factorymode/.camera.manualtest.CameraManualTest
If everything went fine, you should get access to the camera !
I could not use a terminal app to run the command, usually because the terminal app doesn't want to let the camera application to take over the view, or something like that, not sure.
The ideal would be to have a dedicated apk to run the command, at least for the time being.
Tried to launch using an app called Activity launcher and it didn't work.
play.google.com/store/apps/details?id=de.szalkowski.activitylauncher
imgur.com/a/BS9Wqzc
I'm not rooted, are you sure this works for non rooted devices? I'll try later with adb to see what happens.
Here is the error from Termux. Hope it can be loaded via apk, not sure if it suffers same restrictions:
$ am start -n com.oneplus.factorymode/.camera.manualtest.CameraManualTest
Starting: Intent { cmp=com.oneplus.factorymode/.camera.manualtest.CameraManualTest }
Warning: Activity not started because the current activity is being kept for the user.
From what I understood, you need to run the command from an adb shell. You cannot run it from within the phone as far as I know.
You can still run it from adb and "lock" the application so it stays in the background.
And I tried with multiple Terminal apps, the command works with none of them (Termux, Terminal Emulator, Material Terminal, etc...)
Apparently, you have some rights on the adb command shell that you don't get as a simple user on the phone.
You man are genius. I found easy way also to keep it running if needed. After getting the camera test to run, you can lock the app so phone will not close it and always return to it. Thanks, finally I can enjoy my camera
Launched it without a computer by using ADB from temux
--no root required
https://github.com/MasterDevX/Termux-ADB
*Enable wireless debugging (wireless doesn't actually need to be on)
Note wireless debugging --takes some time to take effect, sometimes up to 3-5 minutes for me.
*Run the installer above in termux,
*Type adb devices
*Type adb connect 127.0.0.1
*Accept the trusted key
*type adb shell
Troubleshooting:
*If you get an error about multiple devices type adb kill-server
*type adb devices
*type adb shell
*Accept the trusted key
*then paste in: am start -n com.oneplus.factorymode/.camera.manualtest.CameraManualTest
lllsondowlll said:
Here is the error from Termux. Hope it can be loaded via apk, not sure if it suffers same restrictions:
$ am start -n com.oneplus.factorymode/.camera.manualtest.CameraManualTest
Starting: Intent { cmp=com.oneplus.factorymode/.camera.manualtest.CameraManualTest }
Warning: Activity not started because the current activity is being kept for the user.
Click to expand...
Click to collapse
Did you get any solution for this ?
aishkumar said:
Did you get any solution for this ?
Click to expand...
Click to collapse
...
lllsondowlll said:
Launched it without a computer by using ADB from temux
--no root required
https://github.com/MasterDevX/Termux-ADB
*Enable wireless debugging (wireless doesn't actually need to be on)
Note wireless debugging --takes some time to take effect, sometimes up to 3-5 minutes for me.
*Run the installer above in termux,
*Type adb devices
*Type adb connect 127.0.0.1
*Accept the trusted key
*type adb shell
Troubleshooting:
*If you get an error about multiple devices type adb kill-server
*type adb devices
*type adb shell
*Accept the trusted key
*then paste in: am start -n com.oneplus.factorymode/.camera.manualtest.CameraManualTest
Click to expand...
Click to collapse
I've made a script that allows you to launch the Camera from your phone by just typing ./camera in Termux. No root needed. It can be found here: https://github.com/lllsondowlll/OP8_Camera/blob/master/README.md
can u make a video on this how u used termux and what to do whole process screen recording will be helpful coz i am new to this and i dnt wanna mess up with my phone if i lost some files or smthing please make a video i really want to play with IR camera
It works but not really required
It's working, but have few questions to myself.
1. Does it really needed?
Ans: No, you won't keep clicking pics of plastic material to see inside.
2. Is it handy?
Ans: yes, once opened you can pin/lock it in recent app and open whenever required.
It is just a IR camera and nothing wrong in it, I believe OP will enable it in future, because it really doesn't show through the clothes and even if you want to see for some black thin clothes, you need to go near.
So if you are thinking to click the nude people and go closure you will be slapped.
Few images I have taken.
babsvsphudi said:
can u make a video on this how u used termux and what to do whole process screen recording will be helpful coz i am new to this and i dnt wanna mess up with my phone if i lost some files or smthing please make a video i really want to play with IR camera
Click to expand...
Click to collapse
https://youtu.be/iVQYu-CeN24
You can't hurt anything. Just follow the instructions.
lllsondowlll said:
You can't hurt anything. Just follow the instructions.
Click to expand...
Click to collapse
thanks man you are awesome love n respect for u brother
Starting: Intent { cmp=com.oneplus.factorymode/.camera.manualtest.CameraManualTest }
Error type 3
Error: Activity class {com.oneplus.factorymode/com.oneplus.factorymode.camera.manualtest.CameraManualTest} does not exist.
connected to localhost:5555
error: more than one device/emulator
I ran it as the video shows. But I got an error like above.
Is there any way to solve this problem or is it not possible with IN2020? Please forgive me for using a translator.
pcningen said:
Starting: Intent { cmp=com.oneplus.factorymode/.camera.manualtest.CameraManualTest }
Error type 3
Error: Activity class {com.oneplus.factorymode/com.oneplus.factorymode.camera.manualtest.CameraManualTest} does not exist.
connected to localhost:5555
error: more than one device/emulator
I ran it as the video shows. But I got an error like above.
Is there any way to solve this problem or is it not possible with IN2020? Please forgive me for using a translator.
Click to expand...
Click to collapse
I was able to resolve this issue by reinstalling factory mode. I apologize to you for a fuss over. Many thanks to the developers of this method.
Since I can't get termux to work for now, another idea if you want to have it accessible all the time(*), is to run this (beautiful) command with an adb shell from a computer and then lock the app so you can't accidentally close it.
After that you can always go back to it whenever you want it!
*App won't remain locked after reboot, obviously.
lllsondowlll said:
Launched it without a computer by using ADB from temux
--no root required
https://github.com/MasterDevX/Termux-ADB
*Enable wireless debugging (wireless doesn't actually need to be on)
Note wireless debugging --takes some time to take effect, sometimes up to 3-5 minutes for me.
*Run the installer above in termux,
*Type adb devices
*Type adb connect 127.0.0.1
*Accept the trusted key
*type adb shell
Troubleshooting:
*If you get an error about multiple devices type adb kill-server
*type adb devices
*type adb shell
*Accept the trusted key
*then paste in: am start -n com.oneplus.factorymode/.camera.manualtest.CameraManualTest
Click to expand...
Click to collapse
I wanna piggyback on this some, since this is similar to the process I just did.
So while this works for nonroot users (I didn't actually test the nonroot version myself), if you are rooted, AND using magisk, I personally install ADB and fastboot binaries from the repo from zackptg5(?) And then just told termux to run an elevated shell (su) and then pasted in the command linked in OP:
Code:
am start -n com.oneplus.factorymode/.camera.manualtest.CameraManualTest
It then loaded the testmode camera app, and (xXx caused it to crash, I had to disable it but I don't know if it's a setting with my config) voila. It worked! Thank you.
Edit: I wanna say just running termux in root would solve the issue either way still, but, my point still is there.