Hello,
I rooted my Samsung 5210 using Odin v3.07.
In the message screen it said:
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Removed!!
(Also attached a screen shot).
The tablet rebooted, but before I could press Home + Power + Volume Up to enter the Recovery Mode to flash the root zip file, the regular start screen appeared. I rebooted it manually, but since then it's dead - neither pressing the Power or the Home + Power + Volume Up will start the tablet.
Any idea how this can be solved ?
Johi13 said:
Hello,
I rooted my Samsung 5210 using Odin v3.07.
In the message screen it said:
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Removed!!
(Also attached a screen shot).
The tablet rebooted, but before I could press Home + Power + Volume Up to enter the Recovery Mode to flash the root zip file, the regular start screen appeared. I rebooted it manually, but since then it's dead - neither pressing the Power or the Home + Power + Volume Up will start the tablet.
Any idea how this can be solved ?
Click to expand...
Click to collapse
Wao, almost 13 hours and no body has answered. There a a few things you have to do to improve the chance you get help. But before let me say a few things.
1) About Your self:
Your record shows 1rst post in xda!
Can you talk about you, your knowledge and skils.
Is this your first android device? Have you done rom modification before? What?
About P5210?
Is your device New? Can you talk about what you had in your device preciously. Most 5210 came with 4.2.2 but it been said that new are coming with 4.4.2? What was yours.
About your Procedure.
What procedure are you following- Please tell us the link? Just as a note If you are following a Link in the web best to do is to request help in the same Link. But never mind lets continue here.
2) You said: "I rooted my Samsung 5210 using Odin v3.07. "
This is strange: Normally we used Odin to install a partition, or going back to stock. So most of the time Odin is used at the beginning to install the a new Recovery CWM, TWRP or new improves like Philz. Afterwards we reboot into Recovery (NOT ODIN) to install the Super SU (root). Then we restart in Android OS and once up we run Super SU and verify it work. The we can say that we are rooted.
But you said "I rooted" So it was rooted or not?
3) Now in the other hand your picture shows you where trying not to root but to Install a TWRP image? a file called "TWRP Recovery\recovery.tar.md5" So we fall back to what procedure are you following and what files?
4)
The tablet rebooted, but before I could press Home + Power + Volume Up to enter the Recovery Mode to flash the root zip file, the regular start screen appeared.
Click to expand...
Click to collapse
This happens because you did not un-Check "Auto Reboot", look at your Odin image.
You said : "regular start screen appeared" . Did you let it boot all the way to Android OS and then did "Power Off"?
I rebooted it manually, but since then it's dead - neither pressing the Power or the Home + Power + Volume Up will start the tablet
Click to expand...
Click to collapse
What is "rebooted it manually"? I guess all reboot are manually, we do have to manually ask the device to reboot? Listen I do not what to be mean. I am trying to show that what you have written is just confusing??
..., but since then it's dead - neither pressing the Power or the Home + Power + Volume Up will start the tablet
Click to expand...
Click to collapse
Here is the MOST disturbing part of you message. Installing a new recovery.img should not had modified your boot-loaders!! The first boot-loader is the one in charge of responding to [Power] or [Home] + [Power] + [Volume Up]
Once you tell us what procedure you are following and what files, we may have an Idea if you use a bad recovery.img. but for now let said you have a bad recovery image.
You should at least bee able to press [Power] for 5 to 8 seconds and release. This will mimic a Battery Removed. then you could do one of two things:
a) Press power and see it reboot and see the Samsung Logo. And it should boot in to OS.
or
b) Or you should be able to press [Home] + [Power] + [Volume Down] in fact you do not need [HOME] in Tab3 just [Power] + [Volume Down].
Then you should see it booting in "Download Mode"
So why are you saying " it's dead" it is disturbing to me.
NOW here is the MOST important part of this. See me response it has at least 10 times more words than you initial request. And clearly it took me 10 times more time to do it. So do you assignment and tell us more info so that we can help you.
r2d23cpo said:
Wao, almost 13 hours and no body has answered. There a a few things you have to do to improve the chance you get help. But before let me say a few things.
1) About Your self:
Your record shows 1rst post in xda!
Can you talk about you, your knowledge and skils.
Is this your first android device? Have you done rom modification before? What?
Click to expand...
Click to collapse
Well, I guess you're right, I should share a bit more info. I have two android devices: a Samsung Galaxy S Duos (S7562) mobile phone and the Samsung Galaxy Tab 3 (GT-P5210). The mobile has been rooted a while ago and caused me no issues.
About P5210?
Is your device New? Can you talk about what you had in your device preciously. Most 5210 came with 4.2.2 but it been said that new are coming with 4.4.2? What was yours.
Click to expand...
Click to collapse
The device is about 9 months old. I'm not sure, but I guess it was on 4.2.2.
About your Procedure.
What procedure are you following- Please tell us the link? Just as a note If you are following a Link in the web best to do is to request help in
the same Link. But never mind lets continue here.
Click to expand...
Click to collapse
I followed those instructions (apparently I am not yet allowed to insert external links as I do not yet have enough posts in this community)
1. Download Odin v3.07 from this link and extract to your computer.
2. Download TWRP Recovery from here and extract it on your computer. Keep extracting the archive until you get recovery.tar.md5 file.
3. Now download Samsung Galaxy Tab 3 10.1 root file from here and transfer the root.zip file to internal memory of the tablet.
4. Turn off the tablet and press Home+Power+Volume down button simultaneously until you get to a warning screen. Release the buttons and press Volume up button to continue. When the tablet is in download mode, connect it to the computer using USB cable.
5. Start Odin and click on PDA button then select the file “recovery.tar.md5″.
6. On the Odin window make sure “Re-partition” is unchecked.
7. Now click on the Start button to root Samsung Galaxy Tab 3 10.1.
8. Once the flashing process is complete the tablet will reboot.
9. When the tablet is rebooting press Home+Power+Volume up button to enter Recovery mode. From the TWRP recovery flash the root.zip file and reboot the tablet.
I could complete the procedure up to step 9. After reboot I missed to press Home & Power & Volume and it booted regularly. Afterwards I tried to catch up with the missing step, tried to reboot the device but it never came up again.
2) You said: "I rooted my Samsung 5210 using Odin v3.07. "
This is strange: Normally we used Odin to install a partition, or going back to stock. So most of the time Odin is used at the beginning to install the a new Recovery CWM, TWRP or new improves like Philz. Afterwards we reboot into Recovery (NOT ODIN) to install the Super SU (root). Then we restart in Android OS and once up we run Super SU and verify it work. The we can say that we are rooted.
But you said "I rooted" So it was rooted or not?
Click to expand...
Click to collapse
See above.
3) Now in the other hand your picture shows you where trying not to root but to Install a TWRP image? a file called "TWRP Recovery\recovery.tar.md5" So we fall back to what procedure are you following and what files?
Click to expand...
Click to collapse
See above.
4) This happens because you did not un-Check "Auto Reboot", look at your Odin image.
You said : "regular start screen appeared" . Did you let it boot all the way to Android OS and then did "Power Off"?
Click to expand...
Click to collapse
See above.
Here is the MOST disturbing part of you message. Installing a new recovery.img should not had modified your boot-loaders!! The first boot-loader is the one in charge of responding to [Power] or [Home] + [Power] + [Volume Up]
Once you tell us what procedure you are following and what files, we may have an Idea if you use a bad recovery.img. but for now let said you have a bad recovery image.
You should at least bee able to press [Power] for 5 to 8 seconds and release. This will mimic a Battery Removed. then you could do one of two things:
a) Press power and see it reboot and see the Samsung Logo. And it should boot in to OS.
or
b) Or you should be able to press [Home] + [Power] + [Volume Down] in fact you do not need [HOME] in Tab3 just [Power] + [Volume Down].
Then you should see it booting in "Download Mode"
Click to expand...
Click to collapse
I tried this now several times, nothing happens.
Should you need more information, then please let me know.
thanks!
@Johi13
From you simplistic way of answer this is what I got.
*Your experience: I guess you may not be experienced but had done Recovery Installation and root in the past. This is good. I guess then you know what you are doing.
*Your device: "The device is about 9 months old" , I too also believe should had been 4.2.2 originally. So that root out any weird 4.4.2 bootloaders
*Your procedure:??? The procedure shown seems ok except for the 7 instruction:
7. Now click on the Start button to root Samsung Galaxy Tab 3 10.1.
Click to expand...
Click to collapse
should read instead
7. Now click on the Start button to send new recovery to Samsung Galaxy Tab 3 10.1.
Click to expand...
Click to collapse
It my be true that you can not post links. In fact NONE of us should past live links. We can always use one of many alternatives. lets say i want to place this link but I am not allowed:
http://forum.xda-developers.com/showthread.php?t=2442915
So I can do this
Code:
Samsung Galaxy Tab 3 > Galaxy Tab 3 10.1 Android Development > [RECOVERY][TWRP_2.7] SGT3 Recovery[FINAL]
or I can do this
Code:
Please google "[RECOVERY][TWRP_2.7] SGT3 Recovery[FINAL]"
or I can do this:
Code:
h__p://forum.xda-developers.com/showthread.php?t=2442915
Then we here can look and read and inspect the files.
But it does not matter lets assume all is OK. Procedure seems OK and lets say Files are Ok.
You have said
" I rebooted it manually, but since then it's dead - neither pressing the Power or the Home + Power + Volume Up will start the tablet."
"tried to reboot the device but it never came up again"
THIS IS THE IMPORTANT.
I
Installing a new recovery.img should not had modified your boot-loaders!! The first boot-loader is the one in charge of responding to [Power] or [Home] + [Power] + [Volume Up]
Click to expand...
Click to collapse
So this means
You should at least bee able to press [Power] for 5 to 8 seconds and release. This will mimic a Battery Removed. then you could do one of two things:
a) Press power and see it reboot and see the Samsung Logo. And it should boot in to OS.
or
b) Or you should be able to press [Home] + [Power] + [Volume Down] in fact you do not need [HOME] in Tab3 just [Power] + [Volume Down].
Then you should see it booting in "Download Mode"
Click to expand...
Click to collapse
But your response is just:
I tried this now several times, nothing happens.
Click to expand...
Click to collapse
I can not help you any more except suggest you the following:
You could have a broken button like the [Power] ! If the buttons do not work it can not Boot-up.
You may have a Battery with to little juice! Hook it to an outlet ans see if it take charge.
Apart from that you may have damage you boot loading partition!! If this happens there is little we can do. It requires then Specialize service that almost only Samsung can provide such as Jtag or something similar. There is in some Samsung devices that have a Hardware option that when the bootloaders can not be reach it then try to boot from External SDCARD, I have no Idea is this is the case of Tab3 10.
@Johi13
Just a thought, If you could disconnect the battery, and reconnect, you may be able to press just [Volume Down] and see the Battery Icon.
Then you may be able to follow similar instructions.
http://forum.xda-developers.com/showpost.php?p=55270064&postcount=2
Please post results if that works.
Related
I accidentally bricked my Samsung Galaxy S3 with a bad software. Now, It won't turn on at all. I tried this so far by pressing volume + home+ power with no luck. Whatever that I do, I cannot get it to go into download mode. This is what I did that bricked my phone. I really feel so dumb for not seeing the "for windows os!" Any help will be greatly appreciated. Thanks in advanced.
Section 1: (For Windows OS)How to Odin stock pre rooted 4.1.1 JellyBean/Unlock bootloader/Flash a Custom recovery
Step 2: Power device off, hold the volume down/home/power keys until you see a yellow triangle, then press the volume up key to access "odin or download mode".
Step 3: Open odin and connect the oem usb cable to pc & device. There should be a "comport number" in upper left hand corner of odin indicating communication between the device & pc.
Step 4: Click on the PDA function of odin. Select the stock rom you downloaded in step 1, then select start. This operation should take less than 8 minutes before odin will say pass/reset and should reboot. If not manually reboot...
Step 5: Open up the SuperUser application from your app drawer and make sure its up to date!
Step 6: Download the EZ-Unlock app to your device from HERE.(Only use version 1.1 or 1.2 for now as the latest versions have issues!)
Step 7: Open the app and select unlock! Now your unlocked...yup its that easy!
Step 8: Download the EZ-recovery app to your device from HERE.
Step 9: Open app, select CWM recovery, tap the pulldown menu, choose CWM 6.0.1, select flash, then reboot recovery.
Step 10: Congrats you are now rooted, unlocked, and have a custom recovery installed!! If you want to flash a custom rom proceed to section 3 or 4.
It wasn't bad software, just the wrong software. Looking at those directions that is the root and recovery method for a Verizon GS3. Try to get it into download mode again (vol -, home, pwr) and see if you can flash the stock odin files.
KillaHurtz said:
It wasn't bad software, just the wrong software. Looking at those directions that is the root and recovery method for a Verizon GS3. Try to get it into download mode again (vol -, home, pwr) and see if you can flash the stock odin files.
Click to expand...
Click to collapse
Thank you, but that didn't do it cause it's fully bricked. I had to jtag it in order to bring it back to life!
My trusty Galaxy is seriously sick. No matter what keys I use to power it on (power; power+volup; power+voldown; power+both volup & voldown), I get the screen that says: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
So I go into Kies and click on Tools/Emergency firmware recovery. However the "List of devices requiring emergency recovery" box is empty so no recovery can be done through Kies.
Please help me fix this.
1. take out battery.
2. wait 30 seconds
3. put battery back in.
4. press volume down + power for a few seconds until you see the message saying something like 'press volume up to enter into recovery mode." Let go of the volume down + power button, then press the volume up. If you can't get into recovery, I don't know what else you can try. If you do get into recovery follow my previous post
Try using Odin and flashing to stock ROM
+1 to odin mode fixing. Download the tar.md5 file from sammobile.com/firmwares (go to that site and search for the model # of your device and download the tar) then do the stuff in post #2 and then use odin. If you need instructions on how to use odin, theres stuff all over xda and google for it, but i cal walk ya thru it too.
READ EVERYTHING CAREFULLY!
1.Your phone warranty will be void after this tutorial!
2.Any small mistake and your phone is bricked/bootlooped!
3.All of your data will be lost so back it up somewhere
Click to expand...
Click to collapse
(Fixed the tutorial my bad.)
Click to expand...
Click to collapse
Hey Guys Im Back! Thank you for the support and how it blew up. I have tested this on Android 10 UI 2.0 and it works better then ever!
Also installed lineage os : https://forum.xda-developers.com/galaxy-a10/development/rom-lineage-os-a10-a105f-t4078093
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download TWRP and 2 other important files
1.Dial *#1234# and it will show the AP and some others, focus on AP paste it on google and get the download for it
2.After downloaded move the AP to your download folder in your android device
3.You will get a magisk_patched.tar after its been offically converted
4.Get the twrp for a10
Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.After you got everything open the .tar archive and extract vbmeta.img, boot.img and you should already have recovery.img on your Desktop
6.Grab all the 3 .img files and archive them into a .tar using 7zip, Now continue to step C,
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find Desktop.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!
i notice thread title says exynos only.. u do know they are all exynos including a102u and a102u1 right?
Oh. Alright thanks for telling me.
Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.
Cupcake 1.5 said:
Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.
Click to expand...
Click to collapse
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:
cmz6996 said:
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:
Click to expand...
Click to collapse
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Oh! Im happy to hear that!
Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?
cmz6996 said:
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?
Click to expand...
Click to collapse
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.
Cupcake 1.5 said:
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.
Click to expand...
Click to collapse
Alr thanks.
Can you upload it to Mediafire? Mega marks a "temporal error"...
Kyua said:
Can you upload it to Mediafire? Mega marks a "temporal error"...
Click to expand...
Click to collapse
At me it works?
Works on a105m?
Axeggus said:
Works on a105m?
Click to expand...
Click to collapse
Yes
i receive message that i running samsumg not official firmware after odin install recovery.tar
not work
cmz6996 said:
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download Your firmware and TWRP
1.Go in your calls app and dial *#1234# Then You will receive some details about your AP, CP etc. look at the AP then download the firmware by searching it on google and (download it from sites like sammobile etc)
2.After you got your firmware connect your device to your pc after its connected send the entire firmware to the device in the Downloads folder
2.1. Install Magisk Manager
3.After you're in magisk manager press on install (first one) then press install again then press Select and Patch a File
3.1.Chose the firmware you saved on the Downloads folder
3.2.After you tap on it it should've already started modifying it
4.After it finished go back to your pc and move the magisk_patched.tar back to your desktop (It should be located in Downloads)
5.From the magisk_patched.tar extract boot.img and vbmeta.img to your desktop
5.1.Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.2.After recovery.img(TWRP) has been downloaded move it to your desktop
5.3.Select all those three items(vbmeta.img,recovery.img,boot.img) right click then Find 7Zip then press add to archive
5.4.Rename the Archive name to recovery.tar and make sure the archive format is .tar
6.After the Archive has been downloaded follow the steps in C
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find recovery.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!
Click to expand...
Click to collapse
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)
andrea2o18 said:
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)
Click to expand...
Click to collapse
You installed the wrong fir.ware check your right firmware.
BlueFolks said:
i receive message that i running samsumg not official firmware after odin install recovery.tar
Click to expand...
Click to collapse
Be cause you modified the firmware ignore that message
have you fixed the storage reduced to 16gb problem?
I have a Samsung galaxy sm-a10. I've tried everything here, even combination files. The error I ALWAYS get is 'failed flashing ROM... OEM lock'
Of course I have unlocked OEM in developer options, but still I get this error in the bootloader.
Any ideas?
THIS MIGHT WORK FOR YOUR DEVICE BUT IF ANY DAMAGE IS DONE TO YOUR DEVICE I AM NOT RESPONSIBLE! AND THIS WILL ONLY WORK ON A10. [SM-A105, SM-A107 AND MORE]
1. You need to install the exact firmware for your model onto your PC. [I recommend a website called updato or install samware and get the firmware there.]
2. Install Odin 3.14.1. If you already have it go to the next step.
3. Unlock your bootloader. If you have done this please go to the next step but if not please go to 3.a
3a. !UNLOCKING YOUR BOOTLOADER WILL FACTORY RESET YOUR DEVICE! - Go to settings and go to about phone, then tap the build number until a message comes on the bottom of the screen saying "You are now a developer!" or something close to that. Go to developer settings by going back to the settings menu and scrolling all the way down to see it. After going to developer options turn on "OEM Unlocking" and tap allow. Also just in case turn on USB Debugging. After that turn off your device. After your phone is turned off press "Volume Up"+ "Volume Down" and plug in a USB from your PC simultaneously, you should see a splash screen with a warning. Hold "Volume Up" for until 7 seconds or less and you should see another warning to confirm you want to unlock the bootloader. Press "Volume Up". You will get a warning when you boot up the phone, just press "Power".
4. After the phone booted up, do the normal setup. Then go to Chrome and download Magisk Manager.
5. Then, go to your pc, and locate the firmware you have downloaded and copy the AP tar file onto your phone.
6. Open magisk manager, tap install, and tap "Select and Patch a File".
7. Select the AP tar file you copied from your PC and wait for the process to be done.
8. You should see a new file called "magisk_patched.tar" and transfer the file to your PC.
9. Open Odin on your PC, and turn off your device and turn it on using "Volume Up", "Volume Down" and USB combination.
10. You should see the same warning sign. Just press "Volume Up" once. Do not hold it just press it once.
11. Your PC will make a sound alerting you that the phone has connected.
12. On the BL section on Odin, open your firmware location and select the file with BL in front of it.
13. On the AP section on Odin, open the "magisk_patched.tar" file you had transferred from the phone.
14. On the CP section on Odin, open your firmware location and select the file with CP in front of it.
15. On the CSC section on Odin, open your firmware location and select the file with CSC in front of it.
16. On Odin, look for a section called Options on the left-hand side. Click options, and turn off auto restart.
17. Click start and wait for the process to finish.
18. After the process is finished, please take the USB out.
19. !!THIS IS THE HARD PART!! - You need to hold down "Volume Down" and "Power". After the screen goes black immediately hold "Volume Up" and "Power". This will direct you to the stock recovery of the phone.
20. If the recovery says, "NO SYSTEM FOUND", don't worry as for then your phone is not A/B partitioned and that's okay and you will need to skip 21 for now and select Reboot System and do the normal setup. But if you can see options in the recovery, please use the "Volume keys" to scroll and "Power" to select. Select Wipe Data and confirm.
21. After the erasing process, just let the phone boot up, and do the setup.
22. Install Magisk Manager if your phone hasn't already downloaded it.
23. !!!FOR THE NON A/B PARTITIONED IF YOU ARE A/B PARTITIONED THEN PLEASE GO TO THE NEXT STEP!!! If you boot up normally - (System without magisk)
Booting up with "Volume Up" and "Power" - (System with magisk)
24. Enjoy Magisk!
If you have any questions please comment them down below!
Thanks to Topjohnwu for creating the method and MAKING magisk.
Downaroo said:
THIS MIGHT WORK FOR YOUR DEVICE BUT IF ANY DAMAGE IS DONE TO YOUR DEVICE I AM NOT RESPONSIBLE! AND THIS WILL ONLY WORK ON A10 ONLY [SM-A105xx].
1. You need to install the exact firmware for your model onto your PC. [I recommend a website called updato or install samware and get the firmware there.]
2. Install Odin 3.14.1. If you already have it go to the next step.
3. Unlock your bootloader. If you have done this please go to the next step but if not please go to 3.a
3a. !UNLOCKING YOUR BOOTLOADER WILL FACTORY RESET YOUR DEVICE! - Go to settings and go to about phone, then tap the build number until a message comes on the bottom of the screen saying "You are now a developer!" or something close to that. Go to developer settings by going back to the settings menu and scrolling all the way down to see it. After going to developer options turn on "OEM Unlocking" and tap allow. Also just in case turn on USB Debugging. After that turn off your device. After your phone is turned off press "Volume Up"+ "Volume Down" and plug in a USB from your PC simultaneously, you should see a splash screen with a warning. Hold "Volume Up" for until 7 seconds or less and you should see another warning to confirm you want to unlock the bootloader. Press "Volume Up". You will get a warning when you boot up the phone, just press "Power".
4. After the phone booted up, do the normal setup. Then go to Chrome and download Magisk Manager.
5. Then, go to your pc, and locate the firmware you have downloaded and copy the AP tar file onto your phone.
6. Open magisk manager, tap install, and tap "Select and Patch a File".
7. Select the AP tar file you copied from your PC and wait for the process to be done.
8. You should see a new file called "magisk_patched.tar" and transfer the file to your PC.
9. Open Odin on your PC, and turn off your device and turn it on using "Volume Up", "Volume Down" and USB combination.
10. You should see the same warning sign. Just press "Volume Up" once. Do not hold it just press it once.
11. Your PC will make a sound alerting you that the phone has connected.
12. On the BL section on Odin, open your firmware location and select the file with BL in front of it.
13. On the AP section on Odin, open the "magisk_patched.tar" file you had transferred from the phone.
14. On the CP section on Odin, open your firmware location and select the file with CP in front of it.
15. On the CSC section on Odin, open your firmware location and select the file with CSC in front of it.
16. On Odin, look for a section called Options on the left-hand side. Click options, and turn off auto restart.
17. Click start and wait for the process to finish.
18. After the process is finished, please take the USB out.
19. !!THIS IS THE HARD PART!! - You need to hold down "Volume Down" and "Power". After the screen goes black immediately hold "Volume Up" and "Power". This will direct you to the stock recovery of the phone.
20. If the recovery says, "NO SYSTEM FOUND", don't worry as for then your phone is not A/B partitioned and that's okay and you will need to skip 21 for now and select Reboot System and do the normal setup. But if you can see options in the recovery, please use the "Volume keys" to scroll and "Power" to select. Select Wipe Data and confirm.
21. After the erasing process, just let the phone boot up, and do the setup.
22. Install Magisk Manager if your phone hasn't already downloaded it.
23. !!!FOR THE NON A/B PARTITIONED IF YOU ARE A/B PARTITIONED THEN PLEASE GO TO THE NEXT STEP!!! If you boot up normally - (System without magisk)
Booting up with "Volume Up" and "Power" - (System with magisk)
24. Enjoy Magisk!
If you have any questions please comment them down below!
Click to expand...
Click to collapse
What about Samsung Galaxy A10s can you tell me please
Ragheb Aloqab said:
What about Samsung Galaxy A10s can you tell me please
Click to expand...
Click to collapse
I am sure you can, but before trying this method please take a full backup
works for a105m bit 5?
daniromerohn said:
works for a105m bit 5?
Click to expand...
Click to collapse
should work, but keep a backup just incase
Downaroo said:
THIS MIGHT WORK FOR YOUR DEVICE BUT IF ANY DAMAGE IS DONE TO YOUR DEVICE I AM NOT RESPONSIBLE! AND THIS WILL ONLY WORK ON A10. [SM-A105, SM-A107 AND MORE]
1. You need to install the exact firmware for your model onto your PC. [I recommend a website called updato or install samware and get the firmware there.]
2. Install Odin 3.14.1. If you already have it go to the next step.
3. Unlock your bootloader. If you have done this please go to the next step but if not please go to 3.a
3a. !UNLOCKING YOUR BOOTLOADER WILL FACTORY RESET YOUR DEVICE! - Go to settings and go to about phone, then tap the build number until a message comes on the bottom of the screen saying "You are now a developer!" or something close to that. Go to developer settings by going back to the settings menu and scrolling all the way down to see it. After going to developer options turn on "OEM Unlocking" and tap allow. Also just in case turn on USB Debugging. After that turn off your device. After your phone is turned off press "Volume Up"+ "Volume Down" and plug in a USB from your PC simultaneously, you should see a splash screen with a warning. Hold "Volume Up" for until 7 seconds or less and you should see another warning to confirm you want to unlock the bootloader. Press "Volume Up". You will get a warning when you boot up the phone, just press "Power".
4. After the phone booted up, do the normal setup. Then go to Chrome and download Magisk Manager.
5. Then, go to your pc, and locate the firmware you have downloaded and copy the AP tar file onto your phone.
6. Open magisk manager, tap install, and tap "Select and Patch a File".
7. Select the AP tar file you copied from your PC and wait for the process to be done.
8. You should see a new file called "magisk_patched.tar" and transfer the file to your PC.
9. Open Odin on your PC, and turn off your device and turn it on using "Volume Up", "Volume Down" and USB combination.
10. You should see the same warning sign. Just press "Volume Up" once. Do not hold it just press it once.
11. Your PC will make a sound alerting you that the phone has connected.
12. On the BL section on Odin, open your firmware location and select the file with BL in front of it.
13. On the AP section on Odin, open the "magisk_patched.tar" file you had transferred from the phone.
14. On the CP section on Odin, open your firmware location and select the file with CP in front of it.
15. On the CSC section on Odin, open your firmware location and select the file with CSC in front of it.
16. On Odin, look for a section called Options on the left-hand side. Click options, and turn off auto restart.
17. Click start and wait for the process to finish.
18. After the process is finished, please take the USB out.
19. !!THIS IS THE HARD PART!! - You need to hold down "Volume Down" and "Power". After the screen goes black immediately hold "Volume Up" and "Power". This will direct you to the stock recovery of the phone.
20. If the recovery says, "NO SYSTEM FOUND", don't worry as for then your phone is not A/B partitioned and that's okay and you will need to skip 21 for now and select Reboot System and do the normal setup. But if you can see options in the recovery, please use the "Volume keys" to scroll and "Power" to select. Select Wipe Data and confirm.
21. After the erasing process, just let the phone boot up, and do the setup.
22. Install Magisk Manager if your phone hasn't already downloaded it.
23. !!!FOR THE NON A/B PARTITIONED IF YOU ARE A/B PARTITIONED THEN PLEASE GO TO THE NEXT STEP!!! If you boot up normally - (System without magisk)
Booting up with "Volume Up" and "Power" - (System with magisk)
24. Enjoy Magisk!
If you have any questions please comment them down below!
Thanks to Topjohnwu for creating the method and MAKING magisk.
Click to expand...
Click to collapse
Does this work on the SM-A102U? Or is there any custom recovery for it?
Tyreethetruth said:
Does this work on the SM-A102U? Or is there any custom recovery for it?
Click to expand...
Click to collapse
Should work with any Samsung galaxy a10, so if it works, enjoy!
Odin keeps crashing when it is nearly complete
I have done this yet however it crashes when I follow your steps with a text box like "Odin Downloader has stop working". I have even gone to the extent where I have turned the magisk_patched.tar into a .tar.md5 file and still the same old error. How do I fix it?
If you require more info, I have a sm-a105fn/ds running android 9. Whenever it is on the "userdata" stage in odin, it crashes. I am using Odin 3 v3.13.1
error in boot and go back to download mode
Not working
I tried and once the flashing was done it rebooted to Download Mode instead and says "error verifying vbmeta image ok_not_signed (3)"
Bad Thread..
My older thread is way mor organized, and doesnt have the 16gb issue that you have... you just copied afanehs thread and made it look bad..
cmz6996 said:
Bad Thread..
My older thread is way mor organized, and doesnt have the 16gb issue that you have... you just copied afanehs thread and made it look bad..
Click to expand...
Click to collapse
I'm sorry, I wasn't copying as I thought of it myself but you're right it has the same steps as afanehs thread. Your thread is more organized and mine doesn't fix the 16gb issue that i had. I'm sorry for the inconvenience
Downaroo said:
I'm sorry, I wasn't copying as I thought of it myself but you're right it has the same steps as afanehs thread. Your thread is more organized and mine doesn't fix the 16gb issue that i had. I'm sorry for the inconvenience
Click to expand...
Click to collapse
No worries, I was abit rough, but try and fix it up. GL In the future!
What to do if it is stuck in recovery in odin. Help me please
.
I have a samsung galaxy a10e sm-a102u and I don't have oem unlocking as an option. Please help
TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.
Flash TWRP Instructions:
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type 'yes' and confirm
Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
Select Reboot to System
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Rooting if necessary
First time Restart or Power off, make sure the OEM unlocking options is grey out
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Select Reboot to - Recovery
Install Magisk Manager
Connect to Internet
Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
Download TWRP_v3.5.0_A505_BTL1.tar, use this if you want to install TWRP only
Download TWRP_v3.5.0_A505_BTL1_Magisk.tar, use this if you want to root - Magisk v21.2 patched
Credit to mohitmallick17
Nice job
this will work with BTK5 fw?
I managed to root Successfully but after additional setup the phone rebooted after 5 secs, it was on but still asked for additional setup, suddenly after updating from Magisk v8.0.5 to Magisk v22 I lost root now I tried to boot device it failed to turn on but now in download mode with error VBmeta: No sign info
Bros! are this supposed to work on SM-A505Fn? cuz i tried it and soft bricked my phone -_-
PetiHun08 said:
Bros! are this supposed to work on SM-A505Fn? cuz i tried it and soft bricked my phone -_-
Click to expand...
Click to collapse
UPDAAAATE. Reflashed everytrhing tried again and works on btl3+ sm-a505fn/ds eu model
shoosterjonesr said:
I managed to root Successfully but after additional setup the phone rebooted after 5 secs, it was on but still asked for additional setup, suddenly after updating from Magisk v8.0.5 to Magisk v22 I lost root now I tried to boot device it failed to turn on but now in download mode with error VBmeta: No sign info
Click to expand...
Click to collapse
U need to flash multidisaabler
Will this work on an A50 witn the Android 11/ OneUI 3.1 update? Because I got nothing but errors and bootloops trying to root that, while I had no problems with an Android 10 version.
IF i dont have an sd card can i sideload
redymedan said:
TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.
Flash TWRP Instructions:
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type 'yes' and confirm
Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
Select Reboot to System
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Rooting if necessary
First time Restart or Power off, make sure the OEM unlocking options is grey out
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Select Reboot to - Recovery
Install Magisk Manager
Connect to Internet
Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
Download TWRP_v3.5.0_A505_BTL1.tar, use this if you want to install TWRP only
Download TWRP_v3.5.0_A505_BTL1_Magisk.tar, use this if you want to root - Magisk v21.ifpatched
Credit to mohitmallick17
Click to expand...
Click to collapse
if i have no sdcard can i sideload multidisabler?
PetiHun08 said:
IF i dont have an sd card can i sideload
if i have no sdcard can i sideload multidisabler?
Click to expand...
Click to collapse
after format data just copy multidisabler to internal storage
Ok with mtp obviously. Thank u
redymedan said:
TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.
Flash TWRP Instructions:
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type 'yes' and confirm
Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
Select Reboot to System
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Rooting if necessary
First time Restart or Power off, make sure the OEM unlocking options is grey out
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Select Reboot to - Recovery
Install Magisk Manager
Connect to Internet
Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
Download TWRP_v3.5.0_A505_BTL1.tar, use this if you want to install TWRP only
Download TWRP_v3.5.0_A505_BTL1_Magisk.tar, use this if you want to root - Magisk v21.2 patched
Credit to mohitmallick17
Click to expand...
Click to collapse
Hmm... Another a505fn but ds model. Im stuck on boootloader warning. Can somebody help? (i flashed multidisabler and rebooted to system
PetiHun08 said:
Hmm... Another a505fn but ds model. Im stuck on boootloader warning. Can somebody help? (i flashed multidisabler and rebooted to system
Click to expand...
Click to collapse
Got back to stock rom. Plz help
PetiHun08 said:
Got back to stock rom. Plz help
Click to expand...
Click to collapse
I think boot.img isthe problem. Maybe can i fiish if i flash twrp with no magsk?(btw my phone has no ramdisk)
Still waitin
Will this work for A50s FN ?
Right now it is flashed with TWRP 3.3.0, but I want to upgrade to Android 11 and is looking for suitable TWRP upgrade. It's my main phone so I can't risk have it bootloop
Hi,I unlocked bootloader,but canot install Twrp.in odin,it always failed.Help ?
What error
PetiHun08 said:
What error
Click to expand...
Click to collapse
In odin it faild,I realise,I'm on exynis version,but cenot finde exynos version of twrp.
I have exynos a50 and mine is forking fine. Ehat error do odin gives you?