Develop Bugs

Secure boot error. LG flash tool 2014 not working d855 need urgent help!

hello friends. i flashed tethered cyanogen mod 11 with bumped twrp recovery. dont know what happened. the installation was smooth. however after i wished to flash another custom rom i couldnt get into recovery. it gave me oot sector verify secure boot error. i tried download mode to flash stock with lg flash tool 2014. but it is also not detecting the device in any com41.. adv is detecte but nothing else. i researched and could make it that i accidentaly deleted my "laf" partition. so i need a link to any guide of how to restore that.
thanks all. but in need of help :crying::crying::crying::crying:

[email protected] said:
hello friends. i flashed tethered cyanogen mod 11 with bumped twrp recovery. dont know what happened. the installation was smooth. however after i wished to flash another custom rom i couldnt get into recovery. it gave me oot sector verify secure boot error. i tried download mode to flash stock with lg flash tool 2014. but it is also not detecting the device in any com41.. adv is detecte but nothing else. i researched and could make it that i accidentaly deleted my "laf" partition. so i need a link to any guide of how to restore that.
thanks all. but in need of help :crying::crying::crying::crying:
Click to expand...
Click to collapse
I think you flashed the boot.img instead of just booting it. have you tried doing the button thing to get into recovery
powerdown(pull out battery)
press and hold volume- and power untill you see the lg logo, then release and press and hold volume- and power, then chose yes and yes(with volume+, volume - and the power button) and you should be in twrp

Yeah tried the button combo. But instead of twrp or factory reset it gives boot certification error. Secure boot verify.

same thing what did you do to fix this??

[email protected] said:
Yeah tried the button combo. But instead of twrp or factory reset it gives boot certification error. Secure boot verify.
Click to expand...
Click to collapse
markslo112 said:
same thing what did you do to fix this??
Click to expand...
Click to collapse
try to get to download mode or fastboot
vol up while inserting usb cable and quote be next time I can't check every answer individually

suljo94 said:
try to get to download mode or fastboot
vol up while inserting usb cable and quote be next time I can't check every answer individually
Click to expand...
Click to collapse
can't do neither of that, if i try download mode the phone shows the same error and turns off. The PC recognizes the phone as "Qualcomm HS-USB QDLoader 9008(COM5). The screen on the phone however is turned off.

markslo112 said:
can't do neither of that, if i try download mode the phone shows the same error and turns off. The PC recognizes the phone as "Qualcomm HS-USB QDLoader 9008(COM5). The screen on the phone however is turned off.
Click to expand...
Click to collapse
you are screwed because you need to send it in(not really fixable)

suljo94 said:
try to get to download mode or fastboot
vol up while inserting usb cable and quote be next time I can't check every answer individually
Click to expand...
Click to collapse
suljo94 said:
you are screwed because you need to send it in(not really fixable)
Click to expand...
Click to collapse
Yeah I know...I will send it in tomorrow, but I doubt they will repair it for free because I messed with it and they will probably see I did something I shouldn't do to the phone. What should I say when I turn it in? Probably best if I say I tried to update it and something went wrong?

LG G4 bootloop.... Need expert help... Ready to pay the price

Hello,
I had been using a H815T, locked bootloader, running Seven HD rom v6.1 for more than 2 months flawlessly. Suddenly yesterday my phone was in charge and it restarted and went into bootloop. Since I tried many things and I went to some local technicians as well as one LG engineer, but all failed to gimme any solution. And I don't have any warrenty, I couldn't ask for a replacement for anyone.
So here's what I tried:
1. Flashing international KDZ
2. Flashing default KDZ
3. Formatting from recovery mode
4. Changing battery
Here's what works:
1. Download mode
2. Recovery mode
So I am ready to pay if anyone gimme a solution out of this. Any help will be appreciated as I am in real trouble coz I cannot afford a new phone now.
With thanks

nipun1110 said:
Hello,
I had been using a H815T, locked bootloader, running Seven HD rom v6.1 for more than 2 months flawlessly. Suddenly yesterday my phone was in charge and it restarted and went into bootloop. Since I tried many things and I went to some local technicians as well as one LG engineer, but all failed to gimme any solution. And I don't have any warrenty, I couldn't ask for a replacement for anyone.
So here's what I tried:
1. Flashing international KDZ
2. Flashing default KDZ
3. Formatting from recovery mode
4. Changing battery
Here's what works:
1. Download mode
2. Recovery mode
So I am ready to pay if anyone gimme a solution out of this. Any help will be appreciated as I am in real trouble coz I cannot afford a new phone now.
With thanks
Click to expand...
Click to collapse
that block at 9% and told you to remove batery unplug phone etc etc?

i have same problem and no 2nd phone here -.- we need a Updated LG Flash Tool 2014 to flash the 20A.kdz

fr33kiLL said:
i have same problem and no 2nd phone here -.- we need a Updated LG Flash Tool 2014 to flash the 20A.kdz
Click to expand...
Click to collapse
unfortunaly we can wait a long time maybe ...

nipun1110 said:
Hello,
I had been using a H815T, locked bootloader, running Seven HD rom v6.1 for more than 2 months flawlessly. Suddenly yesterday my phone was in charge and it restarted and went into bootloop. Since I tried many things and I went to some local technicians as well as one LG engineer, but all failed to gimme any solution. And I don't have any warrenty, I couldn't ask for a replacement for anyone.
So here's what I tried:
1. Flashing international KDZ
2. Flashing default KDZ
3. Formatting from recovery mode
4. Changing battery
Here's what works:
1. Download mode
2. Recovery mode
So I am ready to pay if anyone gimme a solution out of this. Any help will be appreciated as I am in real trouble coz I cannot afford a new phone now.
With thanks
Click to expand...
Click to collapse
stock recovery or twrp..

Google~Android said:
stock recovery or twrp..
Click to expand...
Click to collapse
we have not access at twrp anymore .... and kdz method doesnt work . phone recognized in all lg software ... support tool 9% and issue

shudoha said:
we have not access at twrp anymore .... and kdz method doesnt work . phone recognized in all lg software ... support tool 9% and issue
Click to expand...
Click to collapse
did you have an unlocked bl or not?

Google~Android said:
did you have an unlocked bl or not?
Click to expand...
Click to collapse
of course for flash first twrp and after flash all autoprime files and after this .. impossible to have access at twrp . hard reset work . but nothing happens boot loop kdz for rollback doesnt work too . still blocked at 9% on the tool and 0 on my phone and ask me to remove the battery etc etc i did that too much time . but for nothing and the worst . bridge .. support tool recognize my phone like H815 then no driver problem

i have unlocked BL but didnt have access to ADB and Fastboot(idk why) and got stock recovery after flashing so no chance to go in TWRP

Does the phone freeze at random times? Like no matter where its at, sometimes it boots to the operating system?

Hardware
It's starting to sound more and more like a MEM BLOCK corruption..

Have you tried this: Firmware to Stock with kdz and tot?

Noo

shudoha said:
that block at 9% and told you to remove batery unplug phone etc etc?
Click to expand...
Click to collapse
No..nothing like that

mr turtle droid said:
It's starting to sound more and more like a MEM BLOCK corruption..
Click to expand...
Click to collapse
What's that and what's the remedy? And usually what causes it?

martinsavvy said:
Does the phone freeze at random times? Like no matter where its at, sometimes it boots to the operating system?
Click to expand...
Click to collapse
To me it used to happen sometimes while charging. I had to manually switch off the screen and when i switched on the screen, it became normal for a while. I thought it was due to heavy xposed customizations.

michael08071984 said:
Have you tried this: Firmware to Stock with kdz and tot?
Click to expand...
Click to collapse
That's the KDZ method. Yah I tried it as I mentioned.

michael08071984 said:
Have you tried this: Firmware to Stock with kdz and tot?
Click to expand...
Click to collapse
tested but like i told you .... blocked at 9% and remove battery unplug etc etc and nothing happend

Try this:
copy all zip files you need to reflash (10D or similar) to a memcard
Also download latest twrp and copy it to the directory where you have adb.exe
Open a Command prompt on your PC (where adb is located) and powerup the phone,
open up the Device Manager on your PC to see when the adb device is there,
in the moment where you see the adb device fire up the comand:
adb reboot bootloader
if that works enter the comand:
fastboot boot twrp-2.8.7.0-h815.img
this will boot directly into Twrp without flashing twrp and you can try things from twrp
I hope this will help here, helped me with the phone from a friend of me who had a similar problem.

fire3d said:
Try this:
copy all zip files you need to reflash (10D or similar) to a memcard
Also download latest twrp and copy it to the directory where you have adb.exe
Open a Command prompt on your PC (where adb is located) and powerup the phone,
open up the Device Manager on your PC to see when the adb device is there,
in the moment where you see the adb device fire up the comand:
adb reboot bootloader
if that works enter the comand:
fastboot boot twrp-2.8.7.0-h815.img
this will boot directly into Twrp without flashing twrp and you can try things from twrp
I hope this will help here, helped me with the phone from a friend of me who had a similar problem.
Click to expand...
Click to collapse
problem boot loop when i open my phone even with hard reset that change nothing and adb said : device not found when all program like lg support or bridge recognize my phone like h815 ... then not solution

Stuck in recovery

Hi,
My phone got a message about a virus which I assumed was a devious add, it wouldn't go away so I rebooted. It has gone into Mi-Recovery 3.0 and I cant get out. I've tried to connect to PC suite but it won't connect to my laptop
without debugging, which I can't do. I've wiped data but no good. Any ideas?

Flash full rom img via EDL mode and MiFlash software. Check out the official forums how to do it all.
For me the command fastboot oem edl works to get into edl mode.

pr0x2 said:
Flash full rom img via EDL mode and MiFlash software. Check out the official forums how to do it all.
For me the command fastboot oem edl works to get into edl mode.
Click to expand...
Click to collapse
Thank you for answering. I have downloaded a full rom and the MiFlash software. I have made an EDL cable but nothing happens. From what I read it says turn the phone off and connect the modified cable and it will enter EDL mode however it just stays on the Mi-Recovery 3.0 page. I've tried the command line you suggest but that can't find the phone. I've also tried the test point method and still can't get into edl mode. What am I doing wrong?
Sorry, I'm new to this so don't really know what I'm doing. Would you be able to give me some easy to follow advise or some links please.

Multi57 said:
Thank you for answering. I have downloaded a full rom and the MiFlash software. I have made an EDL cable but nothing happens. From what I read it says turn the phone off and connect the modified cable and it will enter EDL mode however it just stays on the Mi-Recovery 3.0 page. I've tried the command line you suggest but that can't find the phone. I've also tried the test point method and still can't get into edl mode. What am I doing wrong?
Sorry, I'm new to this so don't really know what I'm doing. Would you be able to give me some easy to follow advise or some links please.
Click to expand...
Click to collapse
You need your normal USB C cable. When you are in fastboot you need to type "fastboot oem edl" your screen will go to black and you are now in EDL mode. Now flash full img via miflash software.

pr0x2 said:
You need your normal USB C cable. When you are in fastboot you need to type "fastboot oem edl" your screen will go to black and you are now in EDL mode. Now flash full img via miflash software.
Click to expand...
Click to collapse
I cant get to fastboot as I'm stuck in Recovery. My only choices are Reboot to System and Back to Main Menu. When I'm in Main Menu my choices are Reboot, Wipe Data or Connect with MIAssistant.

Multi57 said:
I cant get to fastboot as I'm stuck in Recovery. My only choices are Reboot to System and Back to Main Menu. When I'm in Main Menu my choices are Reboot, Wipe Data or Connect with MIAssistant.
Click to expand...
Click to collapse
When you turn off the phone and press vol down + power what does that do?

It shows the Mi start screen then boots strait into recovery Main Menu. I can't turn the phone off without it rebooting.

Does anyone know how I can get around this? I've run out of things to try.

Did you try reflashing the recovery maybe that fixes it?
Sent from my MI 5s using Tapatalk

Can you explain how I do that? I can't connect to my computer so not sure what you mean. I'm new at this so unsure of the options.

Multi57 said:
Can you explain how I do that? I can't connect to my computer so not sure what you mean. I'm new at this so unsure of the options.
Click to expand...
Click to collapse
Oh hmm never mind. Ignore what I said above. I thought you had TWRP recovery but you've got the stock one.
Sent from my MI 5s using Tapatalk

templeka said:
Oh hmm never mind. Ignore what I said above. I thought you had TWRP recovery but you've got the stock one.
Sent from my MI 5s using Tapatalk
Click to expand...
Click to collapse
Is there no way of getting out of stock recovery?

Maybe your volume rocker buttons are faulty .
Happened with one of my friend his device was only booting into recovery mode on reboot because vol+ button was permanently stuck ?
Try to lift up the button if it is stuck or
press button repeatedly for sometime .

Ashish 289, you are right, it was a faulty volume rocker. Once disconnected it booted. Thanks.

Multi57 said:
Hi,
My phone got a message about a virus which I assumed was a devious add, it wouldn't go away so I rebooted. It has gone into Mi-Recovery 3.0 and I cant get out. I've tried to connect to PC suite but it won't connect to my laptop
without debugging, which I can't do. I've wiped data but no good. Any ideas?
Click to expand...
Click to collapse
now its my turn brother got my mi5 bricked in the same way .
it stays in mi recovery 3.0 always . if you tell me what you did after these steps not working ? could you do anything ?
need a solution man, please help .
thanks in advance.

LG G7 ThinQ T mobile hard brick

Hi guys!
I tried to put the android 10 korean beta on my LG G7 ThinQ g710TM T-Mobile, and now it doesn't turn on, the laptop recognizes it as QUALCOMM 9008 MODE I just need to know if its trash already or there's a way that can unbrick the phone (really stupid I know)
Thank you in advance!

If the phone wasn't a T-Mobile:
May be able to flash v35.eng img onto the phone's abl_a partition (make sure this is backed up), then use fastboot commands to copy over the laf_a/_b files of the stock img. Then use download mode to revert back to Android 8/oreo.
May need to use, fastboot boot laf.img, to get onto download mode, as suggested here.

It was a t mobile damn never go for a t mobile again REALLY
paxar331 said:
If the phone wasn't a T-Mobile:
May be able to flash v35.eng img onto the phone's abl_a partition (make sure this is backed up), then use fastboot commands to copy over the laf_a/_b files of the stock img. Then use download mode to revert back to Android 8/oreo.
May need to use, fastboot boot laf.img, to get onto download mode, as suggested here.
Click to expand...
Click to collapse
It was a t mobile damn never go for a t mobile again REALLY

Pocketjam347 said:
It was a t mobile damn never go for a t mobile again REALLY
Click to expand...
Click to collapse
You can try my method to fix it?
https://forum.xda-developers.com/lg...to-recover-hardbrick-9008-mode-boxes-t4052841
I

I don't understand one part
Awesomeslayerg said:
You can try my method to fix it?
https://forum.xda-developers.com/lg...to-recover-hardbrick-9008-mode-boxes-t4052841
I
Click to expand...
Click to collapse
I tried this method 2 days ago but for some reason when I try STEP 7: It says "Extracting kdz to ..." so I tried to wait a WHILE but after 4 hours of wait nothing happened so I was unable to do the next steps
Does it matter if the Phyton says that it was the end of its life?
Thank you so much for your post tho I believe you helped other people

Don't throw it away, I think there's a fix with QFIL.

I'm having a similar problem, but in my case I managed to accidentally erase laf_b from QFIL and this has corrupted my GPT. Now the QFIL partitioner can't see my partitions. Can you help? I may need a flat pack or something? I'm stuck in 9008 mode. The bootloader was unlocked but I couldn't get into fastboot to install TWRP and Lineage OS, so I ended up trying to erase laf_a and laf_b like it says to do in the V40 Qfil guide. Big mistake. Qfil and windows both recognize it as a 9008 device on Com3, but can't access the partitions.

I got the phone from a friend and i'm in the same position. The method from Awesomeslayerg just gives me sahara error

THE KHAMELEON said:
I got the phone from a friend and i'm in the same position. The method from Awesomeslayerg just gives me sahara error
Click to expand...
Click to collapse
See the FAQ in that guide.
Restart edl when connected to qfil or try different USB port or different PC.

lefttobleed said:
See the FAQ in that guide.
Restart edl when connected to qfil or try different USB port or different PC.
Click to expand...
Click to collapse
I don't have another PC to try it on. I been trying other ports and nothing. As I use my tweezers to put the phone in EDL I press download and still the error.
I don't know if this phone is T-Mobile or not. The IMEI shows T-Mobile but inside the phone shows numbers for Verizon

THE KHAMELEON said:
I don't have another PC to try it on. I been trying other ports and nothing. As I use my tweezers to put the phone in EDL I press download and still the error.
I don't know if this phone is T-Mobile or not. The IMEI shows T-Mobile but inside the phone shows numbers for Verizon
Click to expand...
Click to collapse
Not sure what's wrong with your phone...
Once I got out of this error by quickly pressing download when phone enters edl. Need to be fast.
Try that.

lefttobleed said:
Not sure what's wrong with your phone...
Once I got out of this error by quickly pressing download when phone enters edl. Need to be fast.
Try that.
Click to expand...
Click to collapse
To be honest I think it could be me just having the files in the wrong place or something else I'm doing wrong. All I get is Sahara error

Pocketjam347 said:
Hi guys!
I tried to put the android 10 korean beta on my LG G7 ThinQ g710TM T-Mobile, and now it doesn't turn on, the laptop recognizes it as QUALCOMM 9008 MODE I just need to know if its trash already or there's a way that can unbrick the phone (really stupid I know)
Thank you in advance!
Click to expand...
Click to collapse
Same problem with my phone.
I also try these things.
If you solved that problem then please share with me.

LG K10 2017 m250n stuck on the LG Logo

My Lg just froze and rebootet into the normal boot screen where it just stays
I tried to factory reset it but it just says erase for a short moment and goes back to Lg Logo
I tried Lgup with a Stock rom for the LG it finishes everything but just goes into Lg logo again
Any Help??

Leon200318 said:
My Lg just froze and rebootet into the normal boot screen where it just stays
I tried to factory reset it but it just says erase for a short moment and goes back to Lg Logo
I tried Lgup with a Stock rom for the LG it finishes everything but just goes into Lg logo again
Any Help??
Click to expand...
Click to collapse
Anyone with the same problem or a fix?

Leon200318 said:
Anyone with the same problem or a fix?
Click to expand...
Click to collapse
You have either bricked the phone or its not the correct rom,
Try a different rom, Maybe you can restore it with TWRP if you installed it, Or try download mode.

Eevvaann6 said:
You have either bricked the phone or its not the correct rom,
Try a different rom, Maybe you can restore it with TWRP if you installed it, Or try download mode.
Click to expand...
Click to collapse
The Rom is from the official Lg site tried 2 different
I dont have a recovery cause i cant get into fastboot neither recovery mode
Just lg logo mode and download mode/firmware update mode.
I go try some other roms

Leon200318 said:
The Rom is from the official Lg site tried 2 different
I dont have a recovery cause i cant get into fastboot neither recovery mode
Just lg logo mode and download mode/firmware update mode.
I go try some other roms
Click to expand...
Click to collapse
Make sure its for the correct model, I have a LG K10 the firmware is on the LG site but I have a At&t model which doesn't have official firmware from the sites. To get into android recovery which might help see your phone is bricked install ADB and Fastboot and run "adb reboot recovery" Also some LG phones don't have Fastboot like the At&t of the LG K10 Which I have. Hope you can get it to work
---------- Post added at 04:02 AM ---------- Previous post was at 03:58 AM ----------
Also try Safe mode, you could try it maybe you can get into it, so if that is the case, its probably something with what you did or how you flashed, if you still can't get it to work maybe wrong firmware.

Eevvaann6 said:
Make sure its for the correct model, I have a LG K10 the firmware is on the LG site but I have a At&t model which doesn't have official firmware from the sites. To get into android recovery which might help see your phone is bricked install ADB and Fastboot and run "adb reboot recovery" Also some LG phones don't have Fastboot like the At&t of the LG K10 Which I have. Hope you can get it to work
---------- Post added at 04:02 AM ---------- Previous post was at 03:58 AM ----------
Also try Safe mode, you could try it maybe you can get into it, so if that is the case, its probably something with what you did or how you flashed, if you still can't get it to work maybe wrong firmware.
Click to expand...
Click to collapse
Adb doesnt find the phone i only can get into download mode and there it doesnt get recognized
My phone hasnt got fastboot too
I tried many firmwares now, neither of them work i tried to do it with lg bridge and it doesnt work either all of the firmwares where for my lg k10 m250n
Is there another way to get into recovery
Bit more information:
When i try to start it in safe mode it shows lg logo goes for a short while to a screen where it shows "erasing" then just goes to lg logo again.
And again another thing: the phone behaves the same if I flash the wrong rom it does the exact same.

Leon200318 said:
Adb doesnt find the phone i only can get into download mode and there it doesnt get recognized
My phone hasnt got fastboot too
I tried many firmwares now, neither of them work i tried to do it with lg bridge and it doesnt work either all of the firmwares where for my lg k10 m250n
Is there another way to get into recovery
Bit more information:
When i try to start it in safe mode it shows lg logo goes for a short while to a screen where it shows "erasing" then just goes to lg logo again.
And again another thing: the phone behaves the same if I flash the wrong rom it does the exact same.
Click to expand...
Click to collapse
How do you try to start that safe mode? What buttons you used?
>Is there another way to get into recovery
Go into download mode and using Send_Command
or lglaf.py give it this command: multi_init
There push Vol+ and then Power once.

CXZa said:
How do you try to start that safe mode? What buttons you used?
>Is there another way to get into recovery
Go into download mode and using Send_Command
or lglaf.py give it this command: multi_init
There push Vol+ and then Power once.
Click to expand...
Click to collapse
Wow didn't thought someone reply to this after the long time I just say thx for response even if it's not workin
I don't even know which buttons I used for safe mode but I can look after it later
I'll give it a try with the python script when I get to my pc tomorrow
Will be Posting the results directly after
Also 2 more questions
What does the recovery look like on the LG k10
And can I flash custom recovery zips with that?

Leon200318 said:
Wow didn't thought someone reply to this after the long time I just say thx for response even if it's not workin
I don't even know which buttons I used for safe mode but I can look after it later
I'll give it a try with the python script when I get to my pc tomorrow
Will be Posting the results directly after
Click to expand...
Click to collapse
The Send_Command might be easier. With that py you have mod it a bit and use an older version drivers. Was it 4.04 or something, then it works.
If you're using Windows that is... Then there is Steadfasterx's and some other lglaf versions that might work...
With send_command you just find the the COM port the diagnose or whatever uses, like:
reg query HKLM\hardware\devicemap\SERIALCOMM
And then: Send_Command.exe \\.\COM[com port number]
Send_Command.exe \\.\COM22
Then you can give that command, and by default it will boot to the recovery.
In recovery there is that dead android guy waiting, that's why those buttons.
Custom zips: No way. Now keys to sign them... and the bootloader should be
unlocked to do any changes...

CXZa said:
The Send_Command might be easier. With that py you have mod it a bit and use an older version drivers. Was it 4.04 or something, then it works.
If you're using Windows that is... Then there is Steadfasterx's and some other lglaf versions that might work...
With send_command you just find the the COM port the diagnose or whatever uses, like:
reg query HKLM\hardware\devicemap\SERIALCOMM
And then: Send_Command.exe \\.\COM[com port number]
Send_Command.exe \\.\COM22
Then you can give that command, and by default it will boot to the recovery.
In recovery there is that dead android guy waiting, that's why those buttons.
Custom zips: No way. Now keys to sign them... and the bootloader should be
unlocked to do any changes...
Click to expand...
Click to collapse
I have access to both Windows and Ubuntu
I Will try what you said and just will look if it works
What are my options to do when I'm in recovery mode?

Leon200318 said:
What are my options to do when I'm in recovery mode?
Click to expand...
Click to collapse
Basically the factory reset. Fastboot/bootloader doesn't work.
>There push Vol+ and then Power once.
edit: Actually, it is other way around. Push Power and then Vol+ once.

CXZa said:
Basically the factory reset. Fastboot/bootloader doesn't work.
>There push Vol+ and then Power once.
Actually, try with Vol- if Vol+ doesn't do the trick. Don't remember these so well anymore.
Click to expand...
Click to collapse
I have done many factory resets
They start with a screen saying "erasing" and then just stop then it restarts two times and then just go into LG screen again

Leon200318 said:
Anyone with the same problem or a fix?
Click to expand...
Click to collapse
Same problem, and i cant acces to recovery or bootloader, and im searching for scatter file to use sp flash tools.

javier8340 said:
Same problem, and i cant acces to recovery or bootloader, and im searching for scatter file to use sp flash tools.
Click to expand...
Click to collapse
I don't have the bootloader too but I guess yours Is locked too like mine
But that doesn't help me.
I have download mode and recovery mode where the only option is to factory reset it.
Adb doesn't work
And it doesn't made a change for me if I flash a OS that is right or if I flash a OS that is wrong.
It does the same with both so I can't see how I should ever revive it.
Mabye a custom recovery packed into the OS file but idk how and where to get one.

Leon200318 said:
I don't have the bootloader too but I guess yours Is locked too like mine
But that doesn't help me.
I have download mode and recovery mode where the only option is to factory reset it.
Adb doesn't work
And it doesn't made a change for me if I flash a OS that is right or if I flash a OS that is wrong.
It does the same with both so I can't see how I should ever revive it.
Mabye a custom recovery packed into the OS file but idk how and where to get one.
Click to expand...
Click to collapse
I have seen a video where a men do a reflow and works but i dont know if is these the problem, i think its dead.