I have a Tilt 2 from AT&T running Windows Mobile 6.5. I got it in October.
Sometimes my phone's clock will get behind, displaying a time that is an hour or more off. This morning, for example, I had the phone's alarm set for 9am. I woke up at 10am. When I looked at my phone, the clock displayed 8:30am. I power cycled it and it displayed the correct time.
My apartment has lousy cell reception, and I often have no signal at all when inside. Does this phone/OS rely on the cellular network to know what time it is?
Has anyone experienced similar behavior? Does anyone know if there is a fix for this?
I don't think I can trust my phone to wake me up until I find a way to fix this.
Does this happens when syncing Rhodium with pc?
or it happens even without sync?
The phone does rely on the network to keep time updated.
You could always turn off the automatic updating of the time. That may help.
1. Go to: Settings > Personal > Phone > Time Zone
2. Uncheck: Automatic change time zone and clock.
See if that helps.
orb3000 said:
Does this happens when syncing Rhodium with pc?
or it happens even without sync?
Click to expand...
Click to collapse
I don't sync my phone with PC, and I don't have any push notifications activated.
The phone does rely on the network to keep time updated.
prjkthack said:
You could always turn off the automatic updating of the time. That may help.
1. Go to: Settings > Personal > Phone > Time Zone
2. Uncheck: Automatic change time zone and clock.
See if that helps.
Click to expand...
Click to collapse
Turned off auto-updates as you suggested. Now we wait and see. Thanks for the suggestion.
__________________
Clock falls behind, can't find the automatic settings
For the second time now, I experienced the same problem, where my clock on the Tilt 2 was behind. This time it was during the night and it was off by about 3 hours, and even missed the date change. The first time it was something around an hour. I don't know what's worse, because with the long time you know it's wrong when it's light outside and the time says it shouldn't.
The phone wasn't hot either, so, as far as I know it wasn't busy doing something else. The cell reception was fine here, and I was not syncing. To correct the problem, I looked for the setting to automatically set the time, based on the network. It's not off by precisely one or more hours, so it doesn't look like a timezone itself. Note that I have TouchFlo disabled, and I use the Windows 6.5 Today screen, so it might be a bit different. I looked through several settings beside the clock, but can't find it. Unless it's one and the same of course.
Any idea what could be causing this? Thanks for the powercycle tip.
I disabled what prjkthack said, I needed also to disable the sync option from Sense. This works for 'My Location' but screws other world clocks. Looks like a sort of 'base' clock is set wrong...
i have this issue with the tp and the hd2 both with energyrom.
att tilt 2 clock and date off when updated to new stock rom
hi iam having the same problems with my time and date being wrong everytime i softreset. the minutes usually always seem to be right but a couple hours off always and then you have to go in and manually set the clock. i also had to set the date when i softreset. i tried the my location button, didnt work. also called htc and talked to someone who said the time did have to be set manually, but i really dont think he knew what he was talking about. and it should have exact time from network and sat/gpr connections or even wifi? stange
Interesting. It appears that we might be fighting two different problems then. One that is a timezone offset (i.e. the minutes are the same, but the hours are off), and a full stall of the clock (with the time being off a random amount of hours and minutes).
clock advances one hour every night
Hi,
I have a similar problem with my clock: every night the clock advances one hour. If I do not correct the time, it will be two hours in advance after two nights.
This is since the night, where the daylight saving time ended.
Can anyone help?
I've had my phone over 6 months and two days ago it started having issues with keeping the correct time...
Odd indeed.
Maybe it's ATT causing the problem?
Go into Settings/Personal/Phone, then click the GSM/UTMS services tab. Click on "Time Synchronization", then Get Settings. If the "automatic change time zone & clock" box is checked, uncheck it.
That turns off the synchronization of the Tilt2's clock with the cell network, so that you can synch the time yourself. There are some third-party programs that will let you synch off a NTP server or the phone's GPS receiver -- I use Julien Schapman's Time Synchronizer.
It's not a att thing. I have the same problem since last week. I'm in Argentina and a couple of years ago we had daylight saving time. And the last year we had it we must change it on december 27th (the day it started to change in my phone in 2010. Now everytime i activesync with my pc it advaces 1 hour.
It's really annoying. And fyi my setting have disable automatic change timezone and clock!!
I don't know what to do
Cheers and happy new year
Ignacio
I'm in Argentina too, and having the same problem as Ignacio. The only thing I can add is that my Tilt2 started having this problem right after returning from Uruguay, which by the way, they are one hour ahead of us. My girlfriend has the same phone but she did not activate it while in Uruguay and she is not having this problem.
I really doubt it is just a Sync problem. I've tried every possible configuration and nothing. I wish it would be that simple.
We need a good chef for this one...
Regards
Fito
Offical fix: http://www.htc.com/europe/SupportViewNews.aspx?dl_id=1070&news_id=851
Or just install a ROM that doesn't have this issue (included this fix).
When I originally activated my phone, the billing cycle was the 16th of the month to the 15th of the next month. I've since changed accounts and now my cycle is the 26th to 25th.
How can I change the range used?
Hey not exactly sure if you mean this but go to settings>data usage>data usage cycle.
Hope it is what you want to know
Tap the dates in 'Data usage' next to 'Data usage cycle'.
Set it to the first date of your cycle.
thereddog said:
When I originally activated my phone, the billing cycle was the 16th of the month to the 15th of the next month. I've since changed accounts and now my cycle is the 26th to 25th.
How can I change the range used?
Click to expand...
Click to collapse
Just in case others get here from googling as I did. The way to fix the change date issue is making sure you have data enabled and WiFi off. At least that how I finally had access to change the cycle.
So go into settings make sure WiFi is off and then go to data usage and select data cycle dates and it should drop down under the dates and with a change data cycle.
jetbruceli said:
Just in case others get here from googling as I did. The way to fix the change date issue is making sure you have data enabled and WiFi off. At least that how I finally had access to change the cycle.
So go into settings make sure WiFi is off and then go to data usage and select data cycle dates and it should drop down under the dates and with a change data cycle.
Click to expand...
Click to collapse
Is ther any possibility to do this in Lollopop ? Can't find any
I'm trying to display the monthly data usage beginning with the 15th -> #NTMTHM15#
So now it should show the usage from the last 2 weeks, instead it shows only the last 24 hours.
Is it a bug in Zooper Widget or am I doing something wrong?
[Edit]
It actually shows the data usage for the current month (not the last 24hours as presumed)...
Hi, I'm trying to create a widget/progress bar to show weekly cellular data usage. The built-in fields can give me my Monthly data usage just fine, by using #NTMTHM29# which resets on the 29th of each month. However, I'm going to be moving to a weekly data plan and I'd like to know how I could monitor my weekly data usage. I can see that there is an option to display "Cellular data usage current week" which I assume will reset every Monday, but if my data plan starts say, on a Thursday, how could I cover this?
Any help would be appreciated. Thanks!
OK, I've managed to suss this out. As usual it's quite simple
For anyone who's interested, this is what I've done.....
7 rich text modules (one for each day of the week)
Let's say your weekly data allowance starts every Thursday....
Your 'Thursday' module would be:
$#DE#=Thu?#NTMTH1#$
This is saying "If today is Thursday, show me today's cellular data usage."
Your 'Friday' module would be:
$#DE#=Fri?#NTMTH2#$
Which says "If today is Friday, then show me the last 2 days' worth of data usage."
and so on, until you get to Wednesday which will show the last 7 days. Then the whole process starts again on Thursday and the data usage starts again.
There will only ever be one module that displays, as only one has met its' condition (i.e. the day of the week), all the others will show nothing. Works perfectly.
Dead easy to put into a progress bar too for a visual indicator.
Recently purchased a new, unlocked S8+ and got a new SIM from Verizon. This was approximately 2 weeks ago. Zero problems up until this week. I have been on 4 flights this week - before each flight, the phone works great. When I land on the other end, Verizon LTE pops right up, varying numbers of bars as one would expect depending on arrival airport, just like it would normally when I have service and can do everything. However, nothing. No texts, no calling, no data. Tried toggling various things, resetting, nothing for a hour after that, all the while I've got 3-4-5 bars and I can see the data arrows lighting up like there is upload/download transfer.
Finally, I tried "reset network settings" as a last resort and immediately my phone works like a charm. It has happened another 3 times since - every time I have flown, with the exact same results.
All domestic flights. While I'm not a guru, I'm not a complete halfwit either - this is my 4th galaxy and it's definitely not something I'm doing or have ever had problems with before. I fly all the time and never a problem like this until this week. Checked APN, it's right. Checked software update - have most recent.
Any ideas? I'm desperate. Have searched literally everything I can think of and no one else seems to be reporting this problem, not to mention it's difficult to describe in a Google search. About at my wit's end having to re-enter wifi and passwords every day, relearn Bluetooth devices. Theres no other way to truly reset the mobile data settings and get my phone to work that I've discovered. Please, please help.
Eject SD card and remove sim, wait a min, reinsert cards. While the phone is on. Should reset just ur sim settings. Maybe