Lg g3 f460l get boot loop after edit build.prob, some one have lg f460l tot or kdz firmware, please upload it! Thanks
Do you know how to extract them from a phone? I have a F460S and I'm willing to help out if I can.
Pilz said:
Do you know how to extract them from a phone? I have a F460S and I'm willing to help out if I can.
Click to expand...
Click to collapse
I think only kdz or tot firmware from LG can flash to lg g3 . I can't push stock build.prob because the phone get boot loop, are you can make a zip can flash from stock recovery 3e? F460l v10e
hsrose09 said:
I think only kdz or tot firmware from LG can flash to lg g3 . I can't push stock build.prob because the phone get boot loop, are you can make a zip can flash from stock recovery 3e? F460l v10e
Click to expand...
Click to collapse
If someone can explain how I could try however, I have the F460S so I don't know if it would work. Ive been trying to locate the same files for the S version but I haven't seen any for the S or L.
I know this isn't what you were expecting but ill still try to help out.
Edit:
This website has it and some forum members have used it before but you have to pay to get them which sucks.
http://www.lgbbs.net/thread-553-1-1.html
Related
Hello,
Can someone please point me in the right direction on how to get my F400K that thinks it's a F400L back to F400K?
I tried a couple of the custom roms from the G3 Development forum, but now I want to flash back to stock firmware and the LG Firmware tool errors out and says that CrossDL F400L to F400K error.
Recovery screen shows KTV49L.F400L10A if it helps in anyway.
I just signed up so I'm not able to post this message on the custom rom /development thread.
Cheers,
Jeff
OZJeff said:
Hello,
Can someone please point me in the right direction on how to get my F400K that thinks it's a F400L back to F400K?
I tried a couple of the custom roms from the G3 Development forum, but now I want to flash back to stock firmware and the LG Firmware tool errors out and says that CrossDL F400L to F400K error.
Recovery screen shows KTV49L.F400L10A if it helps in anyway.
I just signed up so I'm not able to post this message on the custom rom /development thread.
Cheers,
Jeff
Click to expand...
Click to collapse
I'm in the same boat, but the other way round. My F400L comes with a F400K firmware and now I can't update it. I've tried flashing the stock firmware following the guide and also got an error saying wrong device model.
windwave said:
I'm in the same boat, but the other way round. My F400L comes with a F400K firmware and now I can't update it. I've tried flashing the stock firmware following the guide and also got an error saying wrong device model.
Click to expand...
Click to collapse
You need to you file explorer with root access and access system/build.prop change your model number in there to F400L and then then restore with the F400L firmware and DLL file using Flash Tool.
jms.flynn said:
You need to you file explorer with root access and access system/build.prop change your model number in there to F400L and then then restore with the F400L firmware and DLL file using Flash Tool.
Click to expand...
Click to collapse
I had a hunch that this was the case, do you know which exact setting that needs to be changed?
I see references to F400L on the following settings
ro.build.id
ro.build.version.incremental
ro.lge.factoryversion
ro.lge.swvesion
ro,product.model
ro.build.description
Cheers.
I've got the same issue as windwave, my F400L came with F400K firmware and I can't update. So did anyone find a way to get their phone back to the correct firmware and update successfully afterwards?
T.R.A.N.C.E. said:
I've got the same issue as windwave, my F400L came with F400K firmware and I can't update. So did anyone find a way to get their phone back to the correct firmware and update successfully afterwards?
Click to expand...
Click to collapse
I was able to use a modified F400K .dll from another thread here, from there I was able to restore to the latest 10g factory firmware and re-flashed it again with the stock .dll.
OZJeff said:
I was able to use a modified F400K .dll from another thread here, from there I was able to restore to the latest 10g factory firmware and re-flashed it again with the stock .dll.
Click to expand...
Click to collapse
Hello OZJeff! I need your help! I have the same problem with you. Which thread that I can download the modified F400K .dll? Thanks a lot!:crying:
bardochu said:
Hello OZJeff! I need your help! I have the same problem with you. Which thread that I can download the modified F400K .dll? Thanks a lot!:crying:
Click to expand...
Click to collapse
Hello... I got the link to download the modified F400K .dll from this thread:
http://forum.xda-developers.com/lg-g3/help/help-flash-f400k-to-d855-load-t2801028
Cheers.
OZJeff said:
Hello... I got the link to download the modified F400K .dll from this thread:
http://forum.xda-developers.com/lg-g3/help/help-flash-f400k-to-d855-load-t2801028
Cheers.
Click to expand...
Click to collapse
Oh! U are so nice! good egg!:victory: My G3 born again! Thank you so much!
Hey! So I am a noob in Lg G4 developing and stuff!
So heres the question, I don't have rooted system or unlocked bootloader, so if I were to Upgrade my G4 H815 from 10D to 20B , what files will I have to flash, like I am downloading the system file , do I also have to flash the modem bootloader Boot , or is the system file enough ?
I am using lg Up to upgrade, so I have no idea what am I doing
All you need in the right kdz file you want to flash and LGUP software on your windows computer.
Thats it...
Good luck.
awes0me1 said:
All you need in the right kdz file you want to flash and LGUP software on your windows computer.
Thats it...
Good luck.
Click to expand...
Click to collapse
Yea, I figured it out later, I was downloading the wrong files thanks!
Yes kdz file is the one you need to flash via LGUP since I had a lot of trouble myself with my LG I've become a little bit of an expert. You can pm me if you need any help Cheers
EDIT: Check this thread for further information
Hello all,
I have a LG G3 D855P Brazilian model.
I've updated my G3 to Marshmallow via the LG Flashtool 2014 using this method:
http://www.android.gs/manually-update-lg-g3-to-android-6-0-using-marshmallow-kdz-and-flash-tool/
I have also installed TWRP to root it in MM.
My phone is working fine, but I want to revert back to official KK or LL. The problem is that I am now unable to restore it back to factory. I have tried the following options:
1. Using the LG FlashTool v1.8.6.527 with LGD855AT-00-V10e-EUR-XX-JUL-08-2014-16G+0.tot and LGD855_20140526_LGFLASHv160.dll.
Doesn't work. The FlashTool complains the device model is wrong (should be D855 when it's actually D855P)
2. Using the LGUP tool. Doesn't work also. It gets stuck at the "Start TOT Download" part (9%) and it never finishes.
What are my options? As far as I know, the TOT file I've been trying to use is the correct one.
Thanks in advance!
Try to change the dil file.if you have kit Kat kdz file.extract dll from that.this method solved my problem .
Jahanzaibawan said:
Try to change the dil file.if you have kit Kat kdz file.extract dll from that.this method solved my problem .
Click to expand...
Click to collapse
Sorry, how do I exactly extract the dll from a kdz?
donatello88 said:
Sorry, how do I exactly extract the dll from a kdz?
Click to expand...
Click to collapse
Use kdz firmware extractor tool .
http://forum.xda-developers.com/showthread.php?t=2600575
What MM are you using now? So far as I know you can donwgrade from MM to LP, not KK, using the LGUP tool.
If I were you, I'd unroot or reflash the MM. Then downgrade to LP. Try to use KDZ files,
Hello guys!
I want to remove TWRP, because I have to send it to LG for repair and it's still in my warranty.
The problem is, that it crashes / reboots really often. I already managed the downgrade from LineageOS 14 to the stock Marshmallow firmware. But now I don't know how to remove TWRP in an easy way, so I thought it would be the best to just flash the stock recovery image for my G3 D855? But I can't find it, can someone help me?
Many thanks in advance!
McCannon said:
Hello guys!
I want to remove TWRP, because I have to send it to LG for repair and it's still in my warranty.
The problem is, that it crashes / reboots really often. I already managed the downgrade from LineageOS 14 to the stock Marshmallow firmware. But now I don't know how to remove TWRP in an easy way, so I thought it would be the best to just flash the stock recovery image for my G3 D855? But I can't find it, can someone help me?
Many thanks in advance!
Click to expand...
Click to collapse
Download a D855 kdz and flash it with LGUP.
MESA said:
Download a D855 kdz and flash it with LGUP.
Click to expand...
Click to collapse
Thank you, but LGUP won't find my device.
Anyway, I will send it to LG and hope for the best.
my brother flash my phone h81520g with a kdz h818 how can i change it back pls help :'(
i use kdz h81520g but LGUP say kds invalid
The first step is to admit it was you
help pls
darkvidouka said:
my brother flash my phone h81520g with a kdz h818 how can i change it back pls help :'(
i use kdz h81520g but LGUP say kds invalid
Click to expand...
Click to collapse
You must use a hex editor and change the h815 kdz to make it look like the h818 so you can flash it
Use the search to find the guide for this here on XDA
Sent from my OnePlus 6T using XDA Labs
i didn't find it can you give it to me with steps pls i m noob on that
https://www.photobox.co.uk/my/photo/full?photo_id=501725780524
I flashed a h818 LP rom and was able to clean flash straight to a h815 LP rim with FIsH no problem
Omg my phone don't work no logo just i see bleu led i can only use usb cable with sound+ to flash it
Helllllllp pls
https://youtu.be/Bpme4mpZp9k
The same in video
darkvidouka said:
The same in video
Click to expand...
Click to collapse
If a h815 won't work try a h818 LP kdz with lgup , remember to "refurbish"
Try to root it and install twrp-in-fish
I flashed camuix on my rooted h815t with fish and it screwed up but I was easily able to wipe it in fish and install genesys LP rom
*I take no responsibility for what you decide to do.*