It's been a long and wild ride, but I think my device is toasted.. sorta.
I unlocked via HTCDev, installed TWRP, rooted. All went well.
Wanted to test GPE ROM. Downloaded and installed 4.4.3.
It had an OTA. Flashed stock recovery to apply it. BAD MOVE!
Ever since, my white hboot is now black, says version 3.18. This is the GPE hboot.
Trying to manually write a new one with dd fails obviously, read only.
RUU fails, saying error 159 (Wrong RUU for this device. It isnt?)
RUU flashing hboot, "unknown error 99" - assuming because S-On.
Firewater s-off FAILED before this happened, because my device just wasn't compatible with it.
Now running the GPE hboot I tried it again, and it just force closes and kicks me back to a terminal after typing in "Yes"
Only AOSP based ROMs are booting now.
TWRP (Multiple versions) as well as PhilZ CWM both fail on most other roms with "set_perm: some changes failed"
And then kick me to a 2-3 bootloop back into recovery.
What are my options? Thanks guys.
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.16.21331931.LA24G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SUREWHYNOT
(bootloader) imei: YESSIR
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6e0f5a3d
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
xHighAlert said:
It's been a long and wild ride, but I think my device is toasted.. sorta.
I unlocked via HTCDev, installed TWRP, rooted. All went well.
Wanted to test GPE ROM. Downloaded and installed 4.4.3.
It had an OTA. Flashed stock recovery to apply it. BAD MOVE!
Ever since, my white hboot is now black, says version 3.18. This is the GPE hboot.
Trying to manually write a new one with dd fails obviously, read only.
RUU fails, saying error 159 (Wrong RUU for this device. It isnt?)
RUU flashing hboot, "unknown error 99" - assuming because S-On.
Firewater s-off FAILED before this happened, because my device just wasn't compatible with it.
Now running the GPE hboot I tried it again, and it just force closes and kicks me back to a terminal after typing in "Yes"
Only AOSP based ROMs are booting now.
TWRP (Multiple versions) as well as PhilZ CWM both fail on most other roms with "set_perm: some changes failed"
And then kick me to a 2-3 bootloop back into recovery.
What are my options? Thanks guys.
Click to expand...
Click to collapse
You cant ruu because your CID is wrong you should supercid by doing ...
"fastboot oem readcid". Make a note of your original CID.
Then do
"fastboot oem writecid 11111111"
Not including parenthesis. Then try the ruu
iRunLinux said:
You cant ruu because your CID is wrong you should supercid by doing ...
"fastboot oem readcid". Make a note of your original CID.
Then do
"fastboot oem writecid 11111111"
Not including parenthesis. Then try the ruu
Click to expand...
Click to collapse
Reminder that I am S-On. All S-Off methods fail for me.
While in RebootRUU:
Code:
C:\Users\Cody\Desktop\ADB Fastboot>fastboot oem readcid
...
(bootloader) cid: T-MOB010
OKAY [ 0.001s]
finished. total time: 0.001s
C:\Users\Cody\Desktop\ADB Fastboot>fastboot oem writecid 11111111
...
(bootloader) SecuritySDInit: counter = 1
(bootloader) m8_init_sd, SD card already power on
(bootloader) [SPEW] GPIO 0 status is 1
(bootloader) [SD_ERR] No sd card inserted!
(bootloader) usb_hw_init
FAILED (status read failed (Too many links))
finished. total time: 0.053s
While in regular fastboot:
Code:
C:\Users\Cody\Desktop\ADB Fastboot>fastboot oem writecid 11111111
...
(bootloader) [JAVACARD_ERR] SD/USBDISK Init error
OKAY [ 0.002s]
finished. total time: 0.002s
xHighAlert said:
Reminder that I am S-On. All S-Off methods fail for me.
While in RebootRUU:
Code:
C:\Users\Cody\Desktop\ADB Fastboot>fastboot oem readcid
...
(bootloader) cid: T-MOB010
OKAY [ 0.001s]
finished. total time: 0.001s
C:\Users\Cody\Desktop\ADB Fastboot>fastboot oem writecid 11111111
...
(bootloader) SecuritySDInit: counter = 1
(bootloader) m8_init_sd, SD card already power on
(bootloader) [SPEW] GPIO 0 status is 1
(bootloader) [SD_ERR] No sd card inserted!
(bootloader) usb_hw_init
FAILED (status read failed (Too many links))
finished. total time: 0.053s
While in regular fastboot:
Code:
C:\Users\Cody\Desktop\ADB Fastboot>fastboot oem writecid 11111111
...
(bootloader) [JAVACARD_ERR] SD/USBDISK Init error
OKAY [ 0.002s]
finished. total time: 0.002s
Click to expand...
Click to collapse
Personally i would try to s-off u said firewater doesnt work but id just try sunshine s-off it costs money but its worth it.
iRunLinux said:
Personally i would try to s-off u said firewater doesnt work but id just try sunshine s-off it costs money but its worth it.
Click to expand...
Click to collapse
Sunshine wants you to get as close to stock as possible.
I'm running the wrong hboot, and can only boot AOSP roms.
But okay I'll give it a spin.
xHighAlert said:
Sunshine wants you to get as close to stock as possible.
I'm running the wrong hboot, and can only boot AOSP roms.
But okay I'll give it a spin.
Click to expand...
Click to collapse
Use the same method in which u flashed the black hboot to flash the stock hboot
---------- Post added at 03:47 AM ---------- Previous post was at 03:42 AM ----------
xHighAlert said:
Sunshine wants you to get as close to stock as possible.
I'm running the wrong hboot, and can only boot AOSP roms.
But okay I'll give it a spin.
Click to expand...
Click to collapse
And if not try flashing gpe stock rooted rom which should boot since your still using that firmware, then try and s-off with sunshine.
I'm in pretty much the same circumstance. Tried going GPE - installed GPE ROM, flashed GPE Recovery to get the 4.4.4 update and now neither GPE nor Sense Roms will install or boot. I had S-Off before, but I think the GPE Recovery put security back on and now I'm back to S-On.
I've tried GPE, Stock Sense, and custom Recoveries and Firmware - nothing is working... I'm stuck running CM11 at the moment.
If only there was an S-Off method that would actually work under CM.
Related
So I am new to the posting aspect of xda but have been around checking out other peeps info for a while. Basically I've gotten into a weird situation, and have no idea now how to fix it. Sorry if there is already a thread for this issue, but I have been looking for 2 days, and decided I was in over my head.
I have a HTC One M7 Verizon (blue Best Buy model) which I got AFTER HTCDev had locked Verizon from unlocking bootloader via their website.
One a exploit was found to unlock the bootloader and gain root, I jumped and ran through the process using a CWM recovery and a Cyanogenmod as my ROM. Everything was peachy until a few days ago when an update, auto updated over night, and created a problem where my phone would reboot show the lock screen, but when I swiped up to unlock it, the green HTC came back up and eventually the thing would reboot.
So I started looking around to see what other ROM's were out there at the moment and flashed ViperOne, all was well, updated my radio, firmware, and such. However, every-time my phone would go into a regular boot after setting up the ViperOne ROM, it would freeze.
So desperate for a fix I hurriedly wiped the system, used CWM recovery to reinstall the stock rom.
Upon doing this I decided I should take advantage of the stock status of the phone and get the OTA's. This is where I became stupid!!!!!
Apparently doing such a thing re-locks your bootloader. Since I wiped the system SU was not longer installed and I lost root as well. Now I cannot issue ANY fastboot FLASH commands from my adb/fastboot CMD.
HELP, pretty, pretty please!!!
I really don't like sense at all, and think that Blinkfeed is the largest piece of #[email protected]*&^% I have ever seen.
Thanks in advance for even reading!
***Edit***
Forgot to mention what's currently running on my phone:
Build/OS: 4.3 JB CL278010 2.10.605.1
Kernal: 3.4.10-g40851b1
[email protected] #1
Baseband v. (Radio) : 1.12.41.1112_2
Basically stock jelly bean, used a stock RUU version flashed via fastboot flash command. Once phone rebooted with stock then applied the 2 previous OTAs I had missed coming from 1.10.605.10 (4.2)
Are you s-off? You could always just do the 2.10.605.1 ruu, hopefully it works and boots. Then use firewater to get unlocked again. Or does the fastboot oem rebootRUU cmd not work?
cmlusco said:
Are you s-off? You could always just do the 2.10.605.1 ruu, hopefully it works and boots. Then use firewater to get unlocked again. Or does the fastboot oem rebootRUU cmd not work?
Click to expand...
Click to collapse
Yes I am still s-off, thank goodness!
I just can't get any flash commands to work, even in oem rebootrRUU.
I can try going through the process your suggesting and see if it works, will update with results.
What errors do you get when trying fastboot cmds?
"What errors do you get when trying fastboot cmds?"
Once I am in bootloader and go into fasbootusb this is what I have tried:
fastboot oem rebootRUU (phone flashes and comes up with the silver HTC on the screen)
Send the command for recovery:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery recovery-clockwork-touch-6.0.4.7-m7vzw.img
target reported max download size of 1526722560 bytes
sending 'recovery' (8786 KB)...
OKAY [ 1.159s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.199s
If I try to flash a zip:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash zip superuser.zip
target reported max download size of 1526722560 bytes
sending 'zip' (4538 KB)...
OKAY [ 0.697s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. total time: 0.972s
It will respond (obviously) when I give it:
fastboot reboot-bootloader
But am not able to enter any adb commands as there isn't a recovery installed!!
Here is the info from the phone:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 1.12.41.1112_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.10.605.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxx
(bootloader) imei:xxxxxxx
(bootloader) meid:xxxxxxxx
(bootloader) product: m7_wlv
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0731000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4242mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-3c88cdd7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.073s
The fastboot system will let me do things like, change my CID from VZW_01 to a super CID11111111 and back again, no errors, but not sure how much help that is...
I worry about trying to flash a new RUU because I can't back anything up right now....also just to be sure I heard I shouldn't upgrade further to Kit-Kat as there isn't a unlocked bootloader exploit yet...correct? (Obviously if I was still unlocked, and not relocked it wouldn't be an issue)
Click to expand...
Click to collapse
Yeah dont upgrade to kk or your sol on rooting. Try to flash twrp with fastboot. http://vzw1files.dyndns.org/RECOVERIES/twrp/Twrp_2.6.3.4_RUU_Mode.zip
fastboot reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip nameoffile.zip
fastboot reboot-bootloader
Then see if you can enter twrp recovery.
cmlusco said:
Yeah dont upgrade to kk or your sol on rooting. Try to flash twrp with fastboot.
fastboot reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip nameoffile.zip
fastboot reboot-bootloader
Then see if you can enter twrp recovery.
Click to expand...
Click to collapse
YAY!!!! That worked
:good:
Thank you for all of your help!! I really appreciate it, I knew there was probably a way to get a custom recovery installed, I just had run out of plays in my own knowledge book!!
I will now be able to do a nandroid b/u and get rid of the stupid sense Blinkfeed, belch! lol
I am fixing a TMO Htc One M8 for a friend. He currently has TWRP recovery but nothing will wipe or flash. I have posted the get var information and the log below along with all the steps I've taken, please share any insight into the matter.
Here is the Get VAR Information. I have tried to fix this device by relocking the Bootloader, flashing stock RUU RUU_M8_TMOUS_1.57.531.7 , Flashing modified firmware.zip, flashing recovery.img, nothing. Then unlocking the bootloader, flashing Philz recovery.img, Twrp.img, still same error. Current TWRP recovery registers nothing but errors. No wiping data, cache, system, etc. No installing backup nandroid, no flashing new rom through external SD card or adb sideload. Literally the phone won't flash anything and the error is error 12, "Remote signature verifiey failed" What kinda insight do you have into this? Anyway to get back to stock?
Thanks!
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.16.21331931.LA24G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA446WM02874
(bootloader) imei: 352628060329457
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6e0f5a3d
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.044s
LOG: D:\All Android Devices\T Mobile HTC One M8>fastboot flash flash TMOUS-M8-1.12.53
1.19.recovery.img
sending 'flash' (24576 KB)...
OKAY [ 1.691s]
writing 'flash'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.953s
D:\All Android Devices\T Mobile HTC One M8>fastboot flash flash philz_touch_6.48
.4-m8.img
sending 'flash' (14436 KB)...
OKAY [ 1.467s]
writing 'flash'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.293s
D:\All Android Devices\T Mobile HTC One M8>fastboot flash flash T_Mo_1.57.531.7_
recovery.img
sending 'flash' (24576 KB)...
OKAY [ 1.688s]
writing 'flash'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.753s
D:\All Android Devices\T Mobile HTC One M8>fastboot oem lock
...
(bootloader) [PGFS] partition_update_pgfs: pg1fs_security
(bootloader) Lock successfully...
(bootloader) deinit_lcd
(bootloader) mipi display off
(bootloader) mdp_clock_off
(bootloader) turn off fd8c2308 failed 1 times. Try again...
(bootloader) disable_mmss_clk done
(bootloader) pll1_disable done
(bootloader) TZ_HTC_SVC_DISABLE ret = 536739196 (0x1FFDFD7C)
(bootloader) [CRITICAL] SPMI write command failure: cmd_id =
0, error
(bootloader) = 4
(bootloader) [CRITICAL] SPMI write command failure: cmd_id =
0, error
(bootloader) = 4
(bootloader) [INFO] Rebooting device
FAILED (status read failed (Too many links))
finished. total time: 1.132s
twill1987 said:
I am fixing a TMO Htc One M8 for a friend. He currently has TWRP recovery but nothing will wipe or flash. I have posted the get var information and the log below along with all the steps I've taken, please share any insight into the matter.
Here is the Get VAR Information. I have tried to fix this device by relocking the Bootloader, flashing stock RUU RUU_M8_TMOUS_1.57.531.7 , Flashing modified firmware.zip, flashing recovery.img, nothing. Then unlocking the bootloader, flashing Philz recovery.img, Twrp.img, still same error. Current TWRP recovery registers nothing but errors. No wiping data, cache, system, etc. No installing backup nandroid, no flashing new rom through external SD card or adb sideload. Literally the phone won't flash anything and the error is error 12, "Remote signature verifiey failed" What kinda insight do you have into this? Anyway to get back to stock?
Thanks!
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.16.21331931.LA24G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA446WM02874
(bootloader) imei: 352628060329457
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6e0f5a3d
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.044s
LOG: D:\All Android Devices\T Mobile HTC One M8>fastboot flash flash TMOUS-M8-1.12.53
1.19.recovery.img
sending 'flash' (24576 KB)...
OKAY [ 1.691s]
writing 'flash'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.953s
D:\All Android Devices\T Mobile HTC One M8>fastboot flash flash philz_touch_6.48
.4-m8.img
sending 'flash' (14436 KB)...
OKAY [ 1.467s]
writing 'flash'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.293s
D:\All Android Devices\T Mobile HTC One M8>fastboot flash flash T_Mo_1.57.531.7_
recovery.img
sending 'flash' (24576 KB)...
OKAY [ 1.688s]
writing 'flash'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.753s
D:\All Android Devices\T Mobile HTC One M8>fastboot oem lock
...
(bootloader) [PGFS] partition_update_pgfs: pg1fs_security
(bootloader) Lock successfully...
(bootloader) deinit_lcd
(bootloader) mipi display off
(bootloader) mdp_clock_off
(bootloader) turn off fd8c2308 failed 1 times. Try again...
(bootloader) disable_mmss_clk done
(bootloader) pll1_disable done
(bootloader) TZ_HTC_SVC_DISABLE ret = 536739196 (0x1FFDFD7C)
(bootloader) [CRITICAL] SPMI write command failure: cmd_id =
0, error
(bootloader) = 4
(bootloader) [CRITICAL] SPMI write command failure: cmd_id =
0, error
(bootloader) = 4
(bootloader) [INFO] Rebooting device
FAILED (status read failed (Too many links))
finished. total time: 1.132s
Click to expand...
Click to collapse
okay I'm wondering why the bootloader is 3.18. I just converted my T-Mobile HTC one m8 to dev edition and that's what my bootloader is now.
That device must have been s-off before if it has the 3.18 bootloader. the problem is now you're s-on with the wrong bootloader in the phone. So it's not gonna verify something it can't. U need to unlock the bootloader then try to s-off again. Let me know if u need more help
twinnfamous said:
okay I'm wondering why the bootloader is 3.18. I just converted my T-Mobile HTC one m8 to dev edition and that's what my bootloader is now.
That device must have been s-off before if it has the 3.18 bootloader. the problem is now you're s-on with the wrong bootloader in the phone. So it's not gonna verify something it can't. U need to unlock the bootloader then try to s-off again. Let me know if u need more help
Click to expand...
Click to collapse
Yes, I think the device was S-off before was well. But how can I get the device S-off when I can't load any rom to establish an internet connection?
There's no way to get back to stock, or get an internet connection through the device to obtain S-off. I can unlock the boot-loader,
I've done that a few times, but how to get S-Off when the only two screens I can access are the bootloader and twrp? When bootloader is unlocked. I have used firewater before for S-off and it requires active internet connection on device.
Thanks again for helping
twill1987 said:
Yes, I think the device was S-off before was well. But how can I get the device S-off when I can't load any rom to establish an internet connection?
There's no way to get back to stock, or get an internet connection through the device to obtain S-off. I can unlock the boot-loader,
I've done that a few times, but how to get S-Off when the only two screens I can access are the bootloader and twrp? When bootloader is unlocked. I have used firewater before for S-off and it requires active internet connection on device.
Thanks again for helping
Click to expand...
Click to collapse
Unlock bootloader try to flash the latest open twrp recovery and try to install another Rom or backup. If you can see the roms in the sdcard then you should be able to flash the roms or backup.
If there was a way to get into adb YOU would be able to s-off again.
twinnfamous said:
Unlock bootloader try to flash the latest open twrp recovery and try to install another Rom or backup. If you can see the roms in the sdcard then you should be able to flash the roms or backup.
If there was a way to get into adb YOU would be able to s-off again.
Click to expand...
Click to collapse
I've tried to flash TWRP but I get that error. I tried to flash the newest twrp but it wouldn't flash.
I think the system is no longer mounted, that's why I get this error :"E: Unable to mount 'data'" and "E: Unable to mount internal storage"
twill1987 said:
I've tried to flash TWRP but I get that error. I tried to flash the newest twrp but it wouldn't flash.
I think the system is no longer mounted, that's why I get this error :"E: Unable to mount 'data'" and "E: Unable to mount internal storage"
Click to expand...
Click to collapse
Is there any option in recovery to format? if so have u tried to format each partition manually?
Then try and see if it will flash. Just need something to boot so you can s-off .
You need to get s-off again so you can flash a ruu with lower hboot if formatting doesn't work or you can try to flash the new 4.4.3 ruu when it becomes available. They said the ota should be out on the 11th.
I'll keep looking for ways to s-off without adb .
Well first your doing the wrong command. Its fastboot flash recovery recovery.img, not fastboot flash flash recovery.img.
x714x said:
Well first your doing the wrong command. Its fastboot flash recovery recovery.img, not fastboot flash flash recovery.img.
Click to expand...
Click to collapse
Yes, that was a typo. Every fastboot flash ends with error 12. Remote Signature.
I have tried literally everything with this device. Tried flashing new TWRP, Radio, Firmware, Etc. Nothing works.
Inside TWRP everything finishes with "failed" or "E: Unable to mount cache"
I tried to select cache under the mount in TWRP and it's greyed out. I fastboot erase cache, and it is literally
the only thing that worked for me. But still no way to restore previous Android. Tried flashing stock RUU's for 4.4.2 and 4.4.3, no dice.
Both RUU's get to 6 percent and then say failed. I'm wondering if the device thinks it's a different phone possibly a GPE edition so it won't
go back to stock? Just a thought. I have unlocked, and relocked the bootloader a million times trying different methods as well, not
sure what else there is to do next. This might be the end of the road for this customers phone.
twinnfamous said:
Is there any option in recovery to format? if so have u tried to format each partition manually?
Then try and see if it will flash. Just need something to boot so you can s-off .
You need to get s-off again so you can flash a ruu with lower hboot if formatting doesn't work or you can try to flash the new 4.4.3 ruu when it becomes available. They said the ota should be out on the 11th.
I'll keep looking for ways to s-off without adb .
Click to expand...
Click to collapse
Yes, that was a typo. Every fastboot flash ends with error 12. Remote Signature.
I have tried literally everything with this device. Tried flashing new TWRP, Radio, Firmware, Etc. Nothing works.
Inside TWRP everything finishes with "failed" or "E: Unable to mount cache"
I tried to select cache under the mount in TWRP and it's greyed out. I fastboot erase cache, and it is literally
the only thing that worked for me. But still no way to restore previous Android. Tried flashing stock RUU's for 4.4.2 and 4.4.3, no dice.
Both RUU's get to 6 percent and then say failed. I'm wondering if the device thinks it's a different phone possibly a GPE edition so it won't
go back to stock? Just a thought. I have unlocked, and relocked the bootloader a million times trying different methods as well, not
sure what else there is to do next. This might be the end of the road for this customers phone.
twinnfamous said:
Is there any option in recovery to format? if so have u tried to format each partition manually?
Then try and see if it will flash. Just need something to boot so you can s-off .
You need to get s-off again so you can flash a ruu with lower hboot if formatting doesn't work or you can try to flash the new 4.4.3 ruu when it becomes available. They said the ota should be out on the 11th.
I'll keep looking for ways to s-off without adb .
Click to expand...
Click to collapse
Under TWRP the only option is to format data. I formatted, but it did nothing that I'm aware of.
twill1987 said:
Under TWRP the only option is to format data. I formatted, but it did nothing that I'm aware of.
Click to expand...
Click to collapse
I just tried to reformat data again and it says same error in TWRP E: Cannot mount cache
I am able to flash Viper Rom though, but because it is S ON the rom won't boot past start up screen.
What a bizarre issue
twill1987 said:
Under TWRP the only option is to format data. I formatted, but it did nothing that I'm aware of.
Click to expand...
Click to collapse
There should be a way now that the new T-Mobile update to flash ruu if we can find one.
Edit: found one
http://www.htcdev.com/devcenter/downloads/P00
Just select T-Mobile as carrier and USA as region then you Wil see the latest ruu to download.
twinnfamous said:
There should be a way now that the new T-Mobile update to flash ruu if we can find one.
Click to expand...
Click to collapse
I flashed the 4.4.3 RUU update at HTCDEV.com It failed at the 6 percent mark. http://www.htcdev.com/devcenter/downloads
twill1987 said:
I just tried to reformat data again and it says same error in TWRP E: Cannot mount cache
I am able to flash Viper Rom though, but because it is S ON the rom won't boot past start up screen.
What a bizarre issue
Click to expand...
Click to collapse
the latest viper is from New firmware base so it takes 15 to 20 minutes to boot. Have you waited that long?
---------- Post added at 10:27 PM ---------- Previous post was at 10:24 PM ----------
twill1987 said:
I flashed the 4.4.3 RUU update at HTCDEV.com It failed at the 6 percent mark. http://www.htcdev.com/devcenter/downloads
Click to expand...
Click to collapse
Sorry it seems I'm getting posts in different orders.
Flash viper and wait 15 to 20 minutes. And we can go from there.
I'm pretty sure we can get this resolved.
twinnfamous said:
the latest viper is from New firmware base so it takes 15 to 20 minutes to boot. Have you waited that long?
---------- Post added at 10:27 PM ---------- Previous post was at 10:24 PM ----------
Sorry it seems I'm getting posts in different orders.
Flash viper and wait 15 to 20 minutes. And we can go from there.
I'm pretty sure we can get this resolved.
Click to expand...
Click to collapse
I'll try to flash the latest Viper. The 1.6.0 it says everything flashed correctly, but gets stuck at the HTC boot screen.
I just flashed the 1.8.0 OTA update and everything installs but it sticks at the boot screen.
I see the 2.2.0 update is out so I'm downloading that now, I'll flash and see how it goes.
I'll update, thanks for your help!
Ruu requires the bootloader be locked
Sent from my HTC One_M8 using XDA Free mobile app
Hi, thanks for reading.
I was running the latest version of CM on my One M8. Decided I wanted to revert to stock ROM to regain HTC camera and wifi calling functionality. Figured an RUU would be the easiest way.
Here's where I probably screwed up. Downloaded and ran the RUU for ver. 2.xxx from HTC. Forgot to relock bootloader, but it rebooted early back into CM no problem. Relocked bootloader. Ran again.
I should have known to pause when I saw that my version was 1.5xx but it seemed fine with updating versions as part of the process.
Then it failed again, error 152. Was able to reboot into CM again this time.
I did some googling and reading and saw one guy say that he was able to fix by simply running the RUU again once it was in the "four exclamation marks in triangles" screen, which is where I was after the next try, so I ran again. Another error 152.
So finally I realized maybe I needed the 1.5xx RUU. DL'd that, tried running, "error, wrong version." Because now it thinks my phone is on ver 2.xxx.
Now I can't get the phone to boot into recovery or into bootloader. No clue where to go from here. I'd really appreciate your help. Gosh I screwed up.
The last lines in the RUU log (1.5xx) are:
Code:
<T205408><DEBUG><OUT>Execution time is 6(s)</OUT>
</DEBUG></T205408>
<T205408><DEBUG><OUT>FAIL43 main version check fail</OUT>
</DEBUG></T205408>
<T205408><DEBUG><OUT>FAILED (remote: 43 main version check fail)</OUT>
and the prior try, RUU log 2.xx:
Code:
<T202916><DEBUG><OUT>(bootloader) [RUU]WP,system,37</OUT>
</DEBUG></T202916>
<T202917><DEBUG><OUT>(bootloader) [RUU]WP,system,42</OUT>
</DEBUG></T202917>
<T202939><DEBUG><OUT>(bootloader) ...... Failed</OUT>
</DEBUG></T202939>
<T202941><DEBUG><OUT>(bootloader) current_image_number=0</OUT>
</DEBUG></T202941>
<T202941><DEBUG><OUT>Execution time is 216(s)</OUT>
</DEBUG></T202941>
<T202941><DEBUG><OUT>FAIL51 partition update fail</OUT>
</DEBUG></T202941>
<T202941><DEBUG><OUT>FAILED (remote: 51 partition update fail)</OUT>
</DEBUG></T202941>
<T203947><DEBUG><CMD>adb kill-server</CMD>
</DEBUG></T203947>
<T203948><DEBUG><OUT />
</DEBUG></T203948>
</LOG>
Thanks.
Update 1: can recognize device using "fastboot devices" but not "adb devices." haven't tried pushing/pulling anything yet. Saw someone in another thread tried installing via command line. Not sure which .zip I should use, as there are a ton of options on XDA, or if this is what I should try next.
Update 2: there are seemingly two versions of the "four exclamation points" screen: one is dim and has the orange led showing and the other is bright without led. Bright without LED is what I got after "flashboot reboot-bootloader". Worried that the bright one may deplete battery.
3: Since I can't otherwise boot into a recovery, should I try to flash a recovery?
4: Not sure if this is useful but:
Code:
getvar version-main is indeed listed as 2.22.531.5
phone CID T-MOB010
phone MID 0P6B13000
5: Phone was S-ON. Wasn't able to get S-OFF using the free method.
6: Was reading another thread with similar error (but One X), this seemed to be useful to the one guy:
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.213311491.03G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.22.531.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ###
(bootloader) imei: ###
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 5e4b24e4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.036s
7: Tried to flash a stock recovery:
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery Tmo-M8-2
.22.531.5-recovery.img
target reported max download size of 1830612992 bytes
sending 'recovery' (24576 KB)...
OKAY [ 1.533s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 2.430s
8: Tried to create some RUU .zips per this method http://forum.xda-developers.com/showthread.php?t=2534428 but the zips say that archive is corrupted. EDIT: MD5's for the .exe's do check out.
9: Used a zip repair to repair those RUU .zip's. Noticed that their android-info files have "hbootpreupdate:12" but my phone has "hbootpreupdate:11" might that be an issue?
Sad Edit: I tried some stuff, nothing seemed to work. Freshly downloaded from an alternative mirror the 2.2xx RUU and booted into RUU via fastbooth before running it. Everything said it went perfectly "CONGRATULATIONS ROM UPDATED! Rebooting!" etc.
My phone is bricked. Never woke up from that reboot. My computer keeps trying to recognize the device via usb, but nothing.
I didn't think you could use unsigned zips with s-on. Also you couldn't flash stock recovery because your boot loader was locked. If your boot loader wasn't locked it would be worked. So it doesn't show anything in fastboot anymore? Have you tried charging it them plugging back up to computer to see if fastboot will recognize it again?
grim489 said:
I didn't think you could use unsigned zips with s-on. Also you couldn't flash stock recovery because your boot loader was locked. If your boot loader wasn't locked it would be worked. So it doesn't show anything in fastboot anymore? Have you tried charging it them plugging back up to computer to see if fastboot will recognize it again?
Click to expand...
Click to collapse
Yeah I tried unlocking the bootloader while fastboot was still recognizable, but it wouldn't work.
Not sure about the unsigned zips thing. Would that also go for the RUU? I thought those were signed/straight from HTC.
I'll try it once more, but it should have been fully charged last time I gave it a try. Computer shows an intermittent "QHSUSB_Bulk" but not sure where to go from there. Found threads for other HTC phones and tried their methods, but it got to the point where the one guy was supposed to go through Ubuntu to manually install individual .imgs to the phone, but I think he had somehow managed to get fastboot to work.
Ruu is straight from HTC they are .exe files. If it is an ruu.zip I think that only works with s-off. Hm I'm not sure what do to either, I was thinking maybe it just needed to force reboot then press power and volume down for hboot/fastboot I don't understand why it wouldn't just reboot.
grim489 said:
Ruu is straight from HTC they are .exe files. If it is an ruu.zip I think that only works with s-off. Hm I'm not sure what do to either, I was thinking maybe it just needed to force reboot then press power and volume down for hboot/fastboot I don't understand why it wouldn't just reboot.
Click to expand...
Click to collapse
Yeah it's especially weird because I thought with S-ON it was supposed to be hard/impossible to override ?boot.ini (not sure, don't quote me on that) anyway. But yep, won't boot at all.
Hey guys
Last night my phone(HTC m8 eye 5.07.401.1) slowed down badly, after a while it restarted automatically and fastboot screen showed up.
Things I've tried:
1-Restarting the phone after fully charging it for 1 billion times (worked once but the phone was frozen and restarted automatically again)
2- Trying to unlock the boot loader(Got the unlock_code.bin file, tried to load it to the phone using adb, it said success or done or something like that but nothing changed)
3-Trying to flash the official rom , didn't work
4-removing the SIM and SD card and restarting the phone, didn't work
by the way, usb debugging was not active last time the phone was working normally, Also the phone have not experienced any unusual activity like rooting or flashing custom roms or...
What can I do?
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: INVALID_VER_INFO
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.07.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA00000000000
(bootloader) imei: 3580000000000000
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: mels_tuhl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B81000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5c9466dd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.039s
------------------------------------------------------------------------------------------- fastboot results----------------------
C:\fastboot>fastboot devices
FA57LY901038 fastboot
C:\fastboot>fastboot oem rebootRUU
...
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) Failed Reading block @ 786432
(bootloader) [SD_ERR] sd_read_sector: read sector failed (786432 256)
(bootloader) [ERR] partition_read_emmc(589): error -1
(bootloader) Start Verify: 3
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) Failed Writing block @ 786432
(bootloader) [SD_ERR] sd_write_sector: write sector failed (786432 256)
OKAY [ 10.041s]
finished. total time: 10.041s
C:\fastboot>fastboot flash zip update.zip
target reported max download size of 1826332672 bytes
sending 'zip' (1687274 KB)...
OKAY [ 57.179s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 118.969s
---------------------------------------------------------------------------------------
I don't have the "eye", only the "standard" M8, but I'll try to help as much as I can, as far as anything that I believe is common between the two M8 versions (unlocking bootloader, flash RUU, etc.).
bahmaniq said:
2- Trying to unlock the boot loader(Got the unlock_code.bin file, tried to load it to the phone using adb, it said success or done or something like that but nothing changed)
Click to expand...
Click to collapse
So the bootloader screen says LOCKED? I assume that is what you mean by "nothing changed", but I want to be clear on this.
bahmaniq said:
3-Trying to flash the official rom , didn't work
Click to expand...
Click to collapse
What is the exact file name? It's best to provide specific file name/version info when asking for help. I've seen a lot of cases where the person "thought" they were flashing the right RUU, but in fact, it was not even the right one.
But based on what you've described so far (bootloader will not unlock, RUU will not run, emmc error) it sounds like a hardware emmc failure.
redpoint73 said:
So the bootloader screen says LOCKED? I assume that is what you mean by "nothing changed", but I want to be clear on this.
Click to expand...
Click to collapse
Yes, *****LOCKED***** it says, I guess it is very serious on this one. Based on knowledge I gathered in these 2 days, I think it should show a black confirmation screen after I try to unlock it (using *.bin file), but it simply does not.
redpoint73 said:
What is the exact file name? It's best to provide specific file name/version info when asking for help. I've seen a lot of cases where the person "thought" they were flashing the right RUU, but in fact, it was not even the right one.
Click to expand...
Click to collapse
Yes you are right, RUU is the most important part and I did not elaborate. There is a big chance that the RUU is the Achilles Heel!! Exact file name is: 0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed
redpoint73 said:
But based on what you've described so far (bootloader will not unlock, RUU will not run, emmc error) it sounds like a hardware emmc failure.
Click to expand...
Click to collapse
So, that's it, I'm gonna play "One last goodbye" and let the history judge. 2 years of EMERGENCY CALLS ONLY, 2 years of zero antenna...
After a silent peaceful night
You took my heart away
oh I wish, I wish you could have stayed
bahmaniq said:
Yes you are right, RUU is the most important part and I did not elaborate. There is a big chance that the RUU is the Achilles Heel!! Exact file name is: 0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed
Click to expand...
Click to collapse
That is not the RUU for the M8 eye. It's the RUU for the "regular" Euro M8. That is why you have signature error. Not sure where you can find the RUU for the "eye".
One more questions, is the phone going to fastbootRUU mode after running the command: fastboot oem rebootRUU
The error "command never completed" would suggest NO. But I'm curious whether the phone actually goes to RUU mode or not. RUU mode is signified by a black screen with large HTC logo. A progress bar will also appear below the logo, when the RUU starts to install. But in your case, you my have not gotten far enough for the progress bar to appear.
If the phone does not in fact even go to RUU mode due to emmc error, then it is probably irrelevant whether you have the right RUU or not. You will not get the RUU to run, if you can't even enter RUU mode.
redpoint73 said:
That is not the RUU for the M8 eye. It's the RUU for the "regular" Euro M8. That is why you have signature error. Not sure where you can find the RUU for the "eye".
One more questions, is the phone going to fastbootRUU mode after running the command: fastboot oem rebootRUU
The error "command never completed" would suggest NO. But I'm curious whether the phone actually goes to RUU mode or not. RUU mode is signified by a black screen with large HTC logo. A progress bar will also appear below the logo, when the RUU starts to install. But in your case, you my have not gotten far enough for the progress bar to appear.
If the phone does not in fact even go to RUU mode due to emmc error, then it is probably irrelevant whether you have the right RUU or not. You will not get the RUU to run, if you can't even enter RUU mode.
Click to expand...
Click to collapse
It has been a long time since the last time I was here but the problem is not solved. Sorry for the delay, and No the black screen with HTC logo does not appear.
Is there anything I can do to get rid of this fastboot screen? or the phone is useless
So, like I found in another threads my old phone, has not sound at all. I tried to fix it years ago, with not luck, but I wanna give it another chance since still it's a great phone.
This is my getvar all
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ---------
(bootloader) imei: ----------------
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B16000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dcdaa6e0
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I tried almost everything, it's currently S-ON, I tried a millon times going S-OFF with HTCDev steps, but nothing. It's UNLOCKED.
If anyone would give me a hand with this, would be awesome.. since my actual phone is broke, like my wallet. :crying:
Thanks! :fingers-crossed:
Stranyer said:
I tried almost everything, it's currently S-ON, I tried a millon times going S-OFF with HTCDev steps, but nothing.
Click to expand...
Click to collapse
HTCDev is not a process to get s-off. It is a process to unlock the bootloader (but you say it's already UNLOCKED). Sunshine is the only valid method to s-off. You can try anything else a billion times, and it will never work.
You most likely also do not need s-off to get the phone working properly again.
I have a feeling that no sound is due to outdated firmware, possibly in conjunction with a custom ROM (ROM - firmware mismatch).
My suggestion, try to relock the bootloader (command: fastboot oem lock) then the following RUU:
http://gsm-firmware.com/index.php?a=downloads&b=file&id=14070
The RUU will wipe all personal data on the phone.
redpoint73 said:
HTCDev is not a process to get s-off. It is a process to unlock the bootloader (but you say it's already UNLOCKED). Sunshine is the only valid method to s-off. You can try anything else a billion times, and it will never work.
You most likely also do not need s-off to get the phone working properly again.
I have a feeling that no sound is due to outdated firmware, possibly in conjunction with a custom ROM (ROM - firmware mismatch).
My suggestion, try to relock the bootloader (command: fastboot oem lock) then the following RUU:
http://gsm-firmware.com/index.php?a=downloads&b=file&id=14070
The RUU will wipe all personal data on the phone.
Click to expand...
Click to collapse
Hey thanks for replying!
I tried that, I keep getting this error
Code:
target reported max download size of 1826418688 bytes
sending 'zip' (1734001 KB)...
OKAY [ 49.344s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 112.683s
I tried doing a reboot and reinstaling.. but still getting error 12 :/
Any clue?
Stranyer said:
I tried that, I keep getting this error
Code:
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
Click to expand...
Click to collapse
"Signature verify fail" usually means the bootloader is unlocked. Did you relock the bootloader as I advised (mandatory in order to install the RUU)? Or if you did, can you verify is says RELOCKED near the top of the bootloader screen?
redpoint73 said:
"Signature verify fail" usually means the bootloader is unlocked. Did you relock the bootloader as I advised (mandatory in order to install the RUU)? Or if you did, can you verify is says RELOCKED near the top of the bootloader screen?
Click to expand...
Click to collapse
Yeah, I did relocked the bootloader. And it does says RELOCKED.
Stranyer said:
Yeah, I did relocked the bootloader. And it does says RELOCKED.
Click to expand...
Click to collapse
I believe you need to flash 6.13.631.7 firmware first before you can install the RUU
https://forum.xda-developers.com/showpost.php?p=60218734&postcount=5
Also you need htc_fastboot to fastboot flash RUU zip
ckpv5 said:
I believe you need to flash 6.13.631.7 firmware first before you can install the RUU
https://forum.xda-developers.com/showpost.php?p=60218734&postcount=5
Also you need htc_fastboot to fastboot flash RUU zip
Click to expand...
Click to collapse
Good point, and makes sense, as most of the US M8 variants require firmware to be flashed for Marshmallow RUU. Even though Rogers is Canadian, that version tends to follow the same rules as the US versions!
ckpv5 said:
I believe you need to flash 6.13.631.7 firmware first before you can install the RUU
https://forum.xda-developers.com/showpost.php?p=60218734&postcount=5
Also you need htc_fastboot to fastboot flash RUU zip
Click to expand...
Click to collapse
redpoint73 said:
Good point, and makes sense, as most of the US M8 variants require firmware to be flashed for Marshmallow RUU. Even though Rogers is Canadian, that version tends to follow the same rules as the US versions!
Click to expand...
Click to collapse
Sorry I took long time to reply.
I tried flashing the firmware, using htc_fasboot and fastboot. Both will give me this error.
Code:
c:\adb>htc_fastboot flash zip fw.zip
sending 'zip'... (53849 KB) OKAY
sending time = 2.408 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
FAILnot allowed
FAILED (remote: not allowed)
Execution time is 5(s)
And still, won't flash RUU.zip
----
I retried a few more times, and it worked! It flashed firmware and ruu
But now is stuck on HTC logo boot. Won't let install a rom over fastboot :/
Code:
sending 'zip'... (360264 KB) OKAY
sending time = 10.763 secs
writing 'zip'... FAILnot allowed
FAILED (remote: not allowed)
Execution time is 11(s)
Stranyer said:
But now is stuck on HTC logo boot. Won't let install a rom over fastboot :/
Code:
sending 'zip'... (360264 KB) OKAY
sending time = 10.763 secs
writing 'zip'... FAILnot allowed
FAILED (remote: not allowed)
Execution time is 11(s)
Click to expand...
Click to collapse
Hard to tell exactly what you tried to do here, since you didn't include the actual command, name of the file you tried to flash, etc. Always include as much specific info as possible. "install a rom" is not sufficient info.
You tried flashing a custom ROM over fastboot? If so, that isn't the proper way to flash a custom ROM. You need custom recovery (TWRP) to do that. So that is the reason for "not allowed" (since it isn't).
But before doing so, we should look closer at the RUU (why it isn't booting) first. Since installing TWRP requires unlocking the bootloader, etc. Better to eliminate the RUU as a solution first, so we don't have to keep going back and forth unlocking/relocking bootloader.
Did the RUU finish successfully without any errors? If there were errors, what did it say specifically? If you don't know the answers to those questions, you can run the RUU again. Even cut/paste the output so we can look at it.