Hello! I tried to get unified storage to my Find 7 (x9076) and ended to mabye brick my device I used aut0mat3d tool @ oppoforums.
I fist installed the recovery and then I ran unified script. After running and waited, noting happened and pull battery off. I,m able to boot recovery and fastboot with penguin logo! i think that I'm messed my partition layout up!
Any help is welcome, Btw long time no posting on Xda, feeling myself NooB and sorry about my bad english
Related
Hi, i didn't know where to post so i just posted this here since i saw other huawei posts in here. (Moderators pls move if misplaced).
I've got a big problem!
I have got a Rooted Huawei Y300 and i've unofficially unlocked the bootloader with DC-Unlocker successfully, and have CWM Recovery installed!
Now here's the deal, i've downloaded Cyanogenmod 11 (4.4) but after i tried to install it, it stopped halfway with "set_metadata_recursive: some changes failed E:Error in /sdcard/name_of_rom_here" (Status 7).
I tried other CM's getting the same error.
Than i tried to reflash to original firmware (V100R001C00B175) from the huawei website, but since i bricked my phone i cannot move the "dload" folder to internal storage so i tried to place it on my sd-card and booting up using Vol- & Power, the upgrade stops at step 2/2 saying it failed.
I'm very sorry not having a backup of the original firmware before i tried CM out (a very stupid and hasty move).
Does anyone have a solution? The phone is just a week old and i've never bricked a phone before (all my old handsets from samsung's to sony's / htc's) and never failed installing a rom or anything related.
Frankly i never suspected CM to fail flashing since everybody else is succesfull ;-/
kind regards,
Ok here's a update. I managed to install AOKP (4.3.1) so i atleast revived my phone. I'm guessing it was something with CM11.
Anyway moderators you can delete this thread, since i found the solution myself..
Thanks
bricked huawei y300
JMailuhu said:
Ok here's a update. I managed to install AOKP (4.3.1) so i atleast revived my phone. I'm guessing it was something with CM11.
Anyway moderators you can delete this thread, since i found the solution myself..
Thanks
Click to expand...
Click to collapse
can you provide instructions on how revive? mine bricked it got stuck on boot logo after succesfully rooting then i installed chainfire 3d but after that when it reboots it got stuck on boot logo plsss help me on this..
Hy All,
Firs of all, sorry for my poor english, I' m just a French Frog !!
Need help on fixing issues I have on my OPPO Find 7a internationnal version.
I used to run on CyanomenMod 11 and I was good.
When Cyanogenmod 12 came, I jump on it and I think I've made a big mistake when I wiped my phone.
I briked it: Black Screen, no fastboot, no recovery, nothing when I wipe everything.
I reach to reload the phone by following a guide: how-to-recover-your-bricked-find-7-7a.23067
So today my phone run on Stock Color OS 1.2 with stock recovery and no root.
When I install TWRP recovery, and try to install Cyanogen 12 + Gapps + root, Recovery said Unable to mount InternalSD or SDCard. And I can't access MicroSD card using my phone.
After reading a lot of things, I am lost ! I gess it's a problem due to partitions layout.
I tried this "tool-partition-repairscripts-for-oppo-find7-find7a.20271" without success ==> Brick again !
Does anybody can help ?
Thanks for help !
Hi dear friends and android lovers.
I have a S4 mini LTE model GT-i9195L, it is the latin american model. It was on 4.4.2 Kitkat android version. Phone was working fine, everything was ok, it was only rooted and it´s like a year and a half old. Suddenly it doesn´t not start anymore, I was using it when I put the phone on a table and never become to life again. Phone seemed to back to life because it had a bootloop, it stuck on the start screen where you see the phone model, and also it can enter to download mode, but in recovery mode it can´t do anything. I tried to flash TWRP and CWM through odin, but doesn´t work, and the last thing that I tried was to flash a stock ROM but it also revive the phone, and now it´s on a hard brick. I know it´s a hard brick, because I repaired a S3 with the same problem, I know how to do the process, but I can´t find a Debrick image for my cellphone. I don´t know even if I can use a debrick image from a gt-i9195 ´cause the "L" means it´s a little bit different phone, but if anyone can solve my doubt about this i will really appreciate.
Any help will be really helpfull.
Thanks in advice.
Hello,
Welcome to XDA.
To better assist you, your thread will be moved to your device Q&A forum linked below.
http://forum.xda-developers.com/galaxy-s4-mini/help
The experts there may be able to help. Good luck.
Hey guys.
Here's my situation:
My phone had some Xtreme rom which was essentially just a debloated stock 6.0 rom.
I was trying to install a very experimental multirom recovery but it essentially failed and was giving me errors whenever I wanted to flash something.
I used the phone like this for a few days because I didn't have time to fix it but eventually it got stuck in a bootloop and all I have access to now is download mode.
Now LGUP is not an option because the makers of Xtreme modified the build.prop and my g4 shows up as unrecognized and Flash Tool doesn't work because I'm on v20i.
I've searched through the forums but there doesn't seem to be any definitive solution to this situation. I would love any advice on the matter...my g4 has been in a coma for about
5 months now and I've been using my galaxy nexus.
Thanks guys.
I had similar situation before, and I managed to get my ass out using file manager from TWRP recovery.
Does your rec come with integrated file manager, or can you flash your rec in current rec?
If it's NO and NO, I guess you're now super hard bricked.
Maybe you can try putting your phone in 9008 and then unbrick it.
Hi All
I have a hard brick issue.
Device.. --Android TV box MXQ Pro 4k
--RK3229 Chip
--h26m42003gmr NaND
--Wifi Chip i need someone to help identify is.....Marked as S9012P
--link to folder with pics - drive.google.com/open?id=19zpX-wPwlswmgDJKL7Qs2JtZ2HsfI5GB
Heres the rub.............Device is 1 month old and just started running slow and freezing. I turned the device off and on again and it booted up but took very long to boot. After the desktop launcher loaded i started getting update failures and app failures as device was unusable. Started device in recovery mode cleared cache and reboot but no luck....Tried a hard reset but no success the device just refused to boot up. Updated a new ROM that worked but did not support the WIFI chipset. Found another rom and reloaded the new one but it Hard Bricked the device. no lights and not loading......cannot get into recovery mode and does not boot from SD.
I was thinking of trying Mask Rom Mode to i am unsure how to proceed.
Please assist any advice will help.
There is a serial port link on the board but im not sure what can be done with it.
Is the emmc dead? or has it just lost the boot image?