Develop Bugs

help rooting my nexus and install rom

Hey guys ,
This is my first post and I was directed here as the experts will be around . I need your help guys to upgrade my phone Galaxy nexus . I have never did any thing on it . It has the following information that might help you guys to help me
Android version 4.0.4
Kernel version 3.0.8-gda6252b
build number imm76k.i9250jple1
I saw some phones that are rooted and have this wonderful images of Roms . I need to try them but I don't know how
I have downloaded the toolkit program but I dont know what ROM shall I select ?? which one is the best ?
Please guys , teach me how and let me start his journey with you
waiting your heeeeeeelp

start here: http://forum.xda-developers.com/showthread.php?t=1812959

recs for a n00b
Since you've never rooted or used a custom ROM before I suggest starting with either mROM or MMuzzy's ROMs. They are close to stock but will get you to Android version 4.2.1
mROM: http://forum.xda-developers.com/showthread.php?t=1763823
MMuzzy: http://forum.xda-developers.com/showthread.php?t=1762846
Remember to MAKE A NANDROID. After you use the toolkit to unlock, root, etc. boot into recovery and MAKE A BACKUP. Also, when you root/unlock it factory resets your phone, so anything not on the SD card that you want to keep, backup to your computer.

This is the thread which completely helped when I was new to rooting and all this stuff. No further help was needed. The methods are very well explained here.
http://forum.xda-developers.com/showthread.php?t=1828635

Thanks guys for your active response ..
I followed every step until I plug my mobile in the fast mode , my computer asks me for drivers .!!!
I have tried to ignore it and I continued the step to flush the ROM , but finally it gives me a message as " Waiting for your Device " >>
Guys ..any idea ??

eye_shy said:
Thanks guys for your active response ..
I followed every step until I plug my mobile in the fast mode , my computer asks me for drivers .!!!
I have tried to ignore it and I continued the step to flush the ROM , but finally it gives me a message as " Waiting for your Device " >>
Guys ..any idea ??
Click to expand...
Click to collapse
It's telling you exactly what the problem is. Install the drivers.

063_XOBX said:
It's telling you exactly what the problem is. Install the drivers.
Click to expand...
Click to collapse
From where I can get these drivers ???

I'm glad you're using fastboot.
Search for naked drivers.
Or use the guide in my Sig or stickied at the top of this forum.
Sorry, at work on mobile. No time to link.

Thanks guys ,
I have tried to use the toolkit software to get the drivers !! and I managed but still wont't work .
Q : Is it possible to install a ROM if the phone is locked ??
bcz i didn't unlocked yet ??

eye_shy said:
Thanks guys ,
I have tried to use the toolkit software to get the drivers !! and I managed but still wont't work .
Q : Is it possible to install a ROM if the phone is locked ??
bcz i didn't unlocked yet ??
Click to expand...
Click to collapse
No. Need custom recovery and an unlocked phone to install the recovery.

eye_shy said:
Thanks guys ,
I have tried to use the toolkit software to get the drivers !! and I managed but still wont't work .
Q : Is it possible to install a ROM if the phone is locked ??
bcz i didn't unlocked yet ??
Click to expand...
Click to collapse
1. use these drivers.. http://forum.xda-developers.com/showthread.php?t=1379875
2. no you need custom recovery and unlcoked bootloader to flash roms
3. read one of these threads to understand more about rooting, and flashing roms so you dont mess up your phone
http://forum.xda-developers.com/showthread.php?t=1812959
http://forum.xda-developers.com/showthread.php?t=1828635

To the OP, use the search function (or Google) - it's all out there!!
To everyone else, don't spoon feed them - let them learn it for themselves. It's better, and more rewarding, then being told everything

EddyOS said:
To everyone else, don't spoon feed them - let them learn it for themselves. It's better, and more rewarding, then being told everything
Click to expand...
Click to collapse
agreed..

Dont rush the root
efrant and jubakuba have both written guides. I suggest not using the tool kit until you know how to use adb/fastboot.

eye_shy said:
Thanks guys for your active response ..
I followed every step until I plug my mobile in the fast mode , my computer asks me for drivers .!!!
I have tried to ignore it and I continued the step to flush the ROM , but finally it gives me a message as " Waiting for your Device " >>
Guys ..any idea ??
Click to expand...
Click to collapse
Don't ignore what your compter says....
Go to the samsung site and download/install the driver http://www.samsung.com/us/support/owners/product/SCH-I515MSAVZW

guys ,
I'm almost there , I have unlocked my phone ,get the drivers , moved the ROM into my memory , but when I go the the recovery mode to select the ROM and do the following as was request by obe memeber ..
wipe data / factory reset
wipe cache partitoin
install zip from sdcard
choose zip from sdcard
The recovery mode wont complete , it shows one robot with red exclamation mark . Then after few minutes , it got restarted .
What's wrong ??

You've not flashed CWM yet...seriously, read the guides properly

EddyOS said:
seriously, read the guides properly
Click to expand...
Click to collapse
this^

seriously, read the guides properly
​
guys ,,, slow down on me a bit ... I told ya I'm new and I'm seeking your help
we are all in here to share the knowledge we have !!

eye_shy said:
seriously, read the guides properly
​
guys ,,, slow down on me a bit ... I told ya I'm new and I'm seeking your help
we are all in here to share the knowledge we have !!
Click to expand...
Click to collapse
That's what we're doing. You need to read the guides. Not skim. Read.

[q] stuck at 3 color screen

Hi.
i was updating my htc touch pro 2 (sprint),Ever thing was going fine and it stuck at 0%
i saw error on my desktop computer (FLASH WRITE ERROR)
so i do a soft reset
all i got now is 3 color screen
NEED HELP TO AGAIN MAKE IT WORK
Sorry for my bad english
THANKS ,
WAITING FOR REPLY

What are you trying to flash?
Are you doing it via SD or via PC? I would assume via PC since you got an error on your PC...
Can you try flashing via SD?

Did you unlock your phone? Did you try to load the stock rom?
You can probably just put the stock rom on the sd card, and load from there.

REPLY
i was updating not flashing
i thing my phone is already unlock i am using it in Pakistan
i try from PC to update
what is SD method and where to find stock rom ?
THANKS FOR THE QUICK RESPONCE

sufian9647 said:
i was updating not flashing
i thing my phone is already unlock i am using it in Pakistan
i try from PC to update
what is SD method and where to find stock rom ?
THANKS FOR THE QUICK RESPONCE
Click to expand...
Click to collapse
Oh, I see... in Pakistan means your phone is unlocked...
You were updating, not flashing....
How silly of me....:silly:
Sigh....
http://forum.xda-developers.com/showthread.php?t=550691

Do i need to do hard-spl
where to find ROM and what mean by root of SD CARD
My phone is already at 3 color screen as u know so do i have to enter boot loader by manual ?
THANKS FOR QUICK RESPONSE :good:

sufian9647 said:
Do i need to do hard-spl
where to find ROM and what mean by root of SD CARD
My phone is already at 3 color screen as u know so do i have to enter boot loader by manual ?
THANKS FOR QUICK RESPONSE :good:
Click to expand...
Click to collapse
What ROM were you flashing before? Just use that one.
wizardknight, look at the screenshot... he's already HSPL'd.
Root of SD card == no folders. 0 folders. Just put the file on the SD card. Not within a FOLDER.

RUU_Rhodium_S2_HTC_Europe_2.07.401.1_Radio_Rhodium_4.49.25.91_Signed_Ship
is the name of file which i use to update ,but its a computer file,how can i use it by putting in SD CARD ?
its a application file,i cant ever extract it

arrrghhh said:
wizardknight, look at the screenshot... he's already HSPL'd.
Click to expand...
Click to collapse
Never said he wasn't.I said the physical location of the phone had no relevance to the locked or unlocked state of the phone.
That would like saying cars can only go fast if they are in France. Completely illogical.
.
---------- Post added at 07:18 PM ---------- Previous post was at 07:18 PM ----------
sufian9647 said:
RUU_Rhodium_S2_HTC_Europe_2.07.401.1_Radio_Rhodium_4.49.25.91_Signed_Ship
is the name of file which i use to update ,but its a computer file,how can i use it by putting in SD CARD ?
its a application file,i cant ever extract it
Click to expand...
Click to collapse
Try 7zip. It will open almost any container file.

i rename the file ruu_signed.nbh to rhodimg.nbh
and put it in SD card root
and start the boot loader
i push the power button to install the update
but got ERROR
SEE THE ATTACHED PIC TO SEE ERROR

sufian9647 said:
i rename the file ruu_signed.nbh to rhodimg.nbh
and put it in SD card root
and start the boot loader
i push the power button to install the update
but got ERROR
SEE THE ATTACHED PIC TO SEE ERROR
Click to expand...
Click to collapse
Hm, it's trying to flash the bootloader... What ROM is this you are trying to flash? It might be a stock ROM which is not appropriate for your device...
wizardknight said:
Never said he wasn't.I said the physical location of the phone had no relevance to the locked or unlocked state of the phone.
That would like saying cars can only go fast if they are in France. Completely illogical.
Click to expand...
Click to collapse
I don't think logic has anything to do with this.... I don't think it ever did my friend, lol.

my mobile is of sprint,i think at start of this thread i put image of my mobile
RUU_Rhodium_S2_HTC_Europe_2.07.401.1_Radio_Rhodium _4.49.25.91_Signed_Ship
this is the file which i downloaded from htc website
i extract it with zip 7
direct me to the link of rom which can work on my device

If this is a Sprint RHOD. Then it should be a Rhod400.
Your screenshot does not show RHOD400.
If it is a sprint RHOD400, then this thread has CDMA wm roms in it.
http://forum.xda-developers.com/showthread.php?t=686903

on my touch pro 2 there in no logo of sprint
but when i power on it display the sprint logo
my question is that is my phone have sprint rom ?
and in pakistan ppcgeek website in block,so i cant access it
u have see the condition of my mobile before and after updating through SD card method also
in my attachment images
did u notice during updating from SD card method it give BOOT LOADER - ERROR
plz help me ,my phone is in this condition almost 1 month

You don't know what kind of phone you have for sure, you don't know what rom was on it for sure, you don't know what rom should be on it, you can't download roms, and you are about 5000 miles away. What do you want us to do?
Go find a repair shop. We can't help you.

i am using touch pro 2
it have sprint ROM Wm 6.5
i have recently downloaded ROM but it give BOOT LOADER ERROR
should i try other ROM also
what can be the cause of BOOT LOADER ERROR,is it due to wrong ROM VERSION ?
I HAVE CONSULTED 2 repair shop they keep my mobile for a week and then return it,
because in Pakistan we have shortage of electricity,so repair shop cant give time to my mobile.

sufian9647 said:
i am using touch pro 2
it have sprint ROM Wm 6.5
i have recently downloaded ROM but it give BOOT LOADER ERROR
should i try other ROM also
what can be the cause of BOOT LOADER ERROR,is it due to wrong ROM VERSION ?
I HAVE CONSULTED 2 repair shop they keep my mobile for a week and then return it,
because in Pakistan we have shortage of electricity,so repair shop cant give time to my mobile.
Click to expand...
Click to collapse
You still have not told us what phone you have. There are at least 5 types of touch pro 2s + some knock off ones.
Sprint rom WM 6.5 does not tell us what rom you are running,
If you downloaded a rom amd it gave you boot loader error, then it must not work on your phone.
I suggest that you find another repair shop that will be able to fix your phone in less than a week, or just buy a new phone.
Good luck. You are going to need it.

i will try next 24 hour to make it run
i will try ROM from the link
http://forum.xda-developers.com/showthread.php?t=686903
but if still failed i will find better repair shop

when i try to download a ROM it give me error
(The file link that you requested is not valid.)
WHAT SHOULD I DO
waiting for your response
THANKS

sufian9647 said:
when i try to download a ROM it give me error
(The file link that you requested is not valid.)
WHAT SHOULD I DO
waiting for your response
THANKS
Click to expand...
Click to collapse
Download another ROM/find another link?
This device is getting quite old now, so it will become infinitely more difficult to find the appropriate files, with valid links.
Good luck.

Root issue - "id" fails in Download mode

A step in the root method is to download a rooter .img, then boot to download mode and enter a few commands, but it 'FAIL's everytime I try to check the id. I have the port right, I have all the drivers, etc, but it keeps failing no matter how many times I do it.
Anyone got any help at all? Having Marshmallow won't affect it, right

potential solution
nerdsabs.blogspot.com/2016/08/root-t-mobile-lg-g4-h811-guide-on-ubuntu.html
I found fastboot can boot into twrp and then root from there

magicwindow said:
A step in the root method is to download a rooter .img, then boot to download mode and enter a few commands, but it 'FAIL's everytime I try to check the id. I have the port right, I have all the drivers, etc, but it keeps failing no matter how many times I do it.
Anyone got any help at all? Having Marshmallow won't affect it, right
Click to expand...
Click to collapse
if you are tring to root phone that has bootloader locked . by flashing rootedsystem.img... then yes it doesnt work on MM you must be on Lp .. it only works onlollipop... and you need to know if you can downgrade first. cause on mine tmobile thers antiroll back V2 and V3 so V2 LP10n and MM20i the same but new 20oMM if i upgrade and then i want to downgrade ill brick phone.. so ask first what antirollback version you are on.. and if you could downgrade

[read] no bootloader

hi
im facing this problem of not having the bootloader page
i once rooted and unlocked the bootloader
then for upgrading the firmware purpose i unrooted and relocked the bootloader
now i want to flash the new firmware , but i cant bcause of no bootloader page
i tried rooting (failed bcause of the same reason)
i tried unlocking (" " " " ")
i cant do anything cause of this problem
pls help me guys
sorry for the bad english

mohdyaz said:
hi
im facing this problem of not having the bootloader page
i once rooted and unlocked the bootloader
then for upgrading the firmware purpose i unrooted and relocked the bootloader
now i want to flash the new firmware , but i cant bcause of no bootloader page
i tried rooting (failed bcause of the same reason)
i tried unlocking (" " " " ")
i cant do anything cause of this problem
pls help me guys
sorry for the bad english
Click to expand...
Click to collapse
If you can access recovery do adb sideload your rom again, it will fix easily.
If not, do this:
http://forum.xda-developers.com/zenfone-5/help/zenfone-5-a500cg-zenfone-6-a600cg-t3354645

ozank said:
If you can access recovery do adb sideload your rom again, it will fix easily.
If not, do this:
http://forum.xda-developers.com/zenfone-5/help/zenfone-5-a500cg-zenfone-6-a600cg-t3354645
Click to expand...
Click to collapse
i tried adb sideload , it loads till 54% and then fails i tried it 5 times i says the same thing
fone works fine but theres no droidboot
i want droidboot

mohdyaz said:
i tried adb sideload , it loads till 54% and then fails i tried it 5 times i says the same thing
fone works fine but theres no droidboot
i want droidboot
Click to expand...
Click to collapse
You need to sideload 2.x roms, 3.x roms cannot be sideloaded like this.
For sideloading another rom you need a fastboot again.
You can do the method i shared link but it completely wipes phone.

Fixed!!!
ozank said:
You need to sideload 2.x roms, 3.x roms cannot be sideloaded like this.
For sideloading another rom you need a fastboot again.
You can do the method i shared link but it completely wipes phone.
Click to expand...
Click to collapse
Hey bro, I just fixed mine. I had no bootloader, no recovery, and the whole partition was ruined. Only a battery with question mark.
First, I fixed the fastboot and recovery. Then fixed the whole partition table using @swiczak 's process. This process has a tiny flaw with the "droidboot.bin" file. I have right file to use. Thanks for keeping me up with this. :highfive:
@mohdyaz, bro......can u have a little patience? I will post a total guide with steps and required files. Till then, take a break. :good:

ozank said:
You need to sideload 2.x roms, 3.x roms cannot be sideloaded like this.
For sideloading another rom you need a fastboot again.
You can do the method i shared link but it completely wipes phone.
Click to expand...
Click to collapse
i dint understand @ozank
and i tried to downgrade , it shows
total xfer : 1.14x

a8962383 said:
Hey bro, I just fixed mine. I had no bootloader, no recovery, and the whole partition was ruined. Only a battery with question mark.
First, I fixed the fastboot and recovery. Then fixed the whole partition table using @swiczak 's process. This process has a tiny flaw with the "droidboot.bin" file. I have right file to use. Thanks for keeping me up with this. :highfive:
@mohdyaz, bro......can u have a little patience? I will post a total guide with steps and required files. Till then, take a break. :good:
Click to expand...
Click to collapse
ok , my fone works fine but jus theres no droidboot(bootloader)
i cant root , unlock bootloader , or upgrade
tell me when u post that whole process ok?:good:

mohdyaz said:
ok , my fone works fine but jus theres no droidboot(bootloader)
i cant root , unlock bootloader , or upgrade
tell me when u post that whole process ok?:good:
Click to expand...
Click to collapse
I think he will explain detailed, so; if you don't understand his explaination, then we will talk

@ozank ok

@mohdyaz
http://forum.xda-developers.com/zenfone-5/help/debrick-asus-zenfoen-5-fastboot-t3377455

Boot Impossible

Hello =)
I was wondering if someone will be able to help me with my honor 8 pro.
I rooted my device with TWRP for a couple of month and decided to get back because I was not able to update my device.
So I restart my phone and was in the TWRP recovery mode I did a wipe and uncheck twrp install app.
I decided to relock my bootloader to install stock firmware.
So it restart in the erecovzry mode (i think he is called like this) it let me download the latest firmware through the wifi but show me an error message couple of second after that.
I'm able to boot in fastboot and rescue mode (with android logo)
I try to download in "dload" folder in the SD Card but when i'm starting with three fingers method it's the same it load 5% and say redownload package (error)
I juste bought the honor 8 pro during the pre realease i'm living in france and i've order it on the official website.
I'm trying to know which model I have (Europe - Asia - Russia) because i put everything in the dload folder but it always show me an error.
Do you know a way to check which region my phone is coming from ? With S/N or IMEI for example ?
What I did it's I have unlock the bootloader (once again) and i have seen the TWRP recovery mode only one time and can't access it again.
Thanks for your help..
I can't use my device for one week now and that's quite embarassing.
Michael

Zirconiumirish said:
Hello =)
I was wondering if someone will be able to help me with my honor 8 pro.
I rooted my device with TWRP for a couple of month and decided to get back because I was not able to update my device.
So I restart my phone and was in the TWRP recovery mode I did a wipe and uncheck twrp install app.
I decided to relock my bootloader to install stock firmware.
So it restart in the erecovzry mode (i think he is called like this) it let me download the latest firmware through the wifi but show me an error message couple of second after that.
I'm able to boot in fastboot and rescue mode (with android logo)
I try to download in "dload" folder in the SD Card but when i'm starting with three fingers method it's the same it load 5% and say redownload package (error)
I juste bought the honor 8 pro during the pre realease i'm living in france and i've order it on the official website.
I'm trying to know which model I have (Europe - Asia - Russia) because i put everything in the dload folder but it always show me an error.
Do you know a way to check which region my phone is coming from ? With S/N or IMEI for example ?
What I did it's I have unlock the bootloader (once again) and i have seen the TWRP recovery mode only one time and can't access it again.
Thanks for your help..
I can't use my device for one week now and that's quite embarassing.
Michael
Click to expand...
Click to collapse
Simple method is download stock firmware and flash via dload...
Did you download correct number firmware..??
Which number of firmware you were on before hoing to custom?

hassanjavaid8181 said:
Simple method is download stock firmware and flash via dload...
Did you download correct number firmware..??
Which number of firmware you were on before hoing to custom?
Click to expand...
Click to collapse
I already try through the dload procedure but didn't succeed lol.
Maybe I didn't find the correct firmware .
I try several maybe 3.
I can't remember which version I was on before trying to reinstall.
I didn't do the B150 and the previous one so I have to version late.
Should I recover only the version I had when trying to reinstall it ?
Thanks a lot for your help

Zirconiumirish said:
I already try through the dload procedure but didn't succeed lol.
Maybe I didn't find the correct firmware .
I try several maybe 3.
I can't remember which version I was on before trying to reinstall.
I didn't do the B150 and the previous one so I have to version late.
Should I recover only the version I had when trying to reinstall it ?
Thanks a lot for your help
Click to expand...
Click to collapse
yes you have to be on same one or higher to flash it succesfully..
otherwise you need a rollback pkg and flash any firmware you want..
if you can find rollback pkg i suggest to you to flash lower android version of full available firmwre after your device boots up update it via ota

hassanjavaid8181 said:
yes you have to be on same one or higher to flash it succesfully..
otherwise you need a rollback pkg and flash any firmware you want..
if you can find rollback pkg i suggest to you to flash lower android version of full available firmwre after your device boots up update it via ota
Click to expand...
Click to collapse
When you say "flash" you mean use TWRP ? or only put the firmware on the sdcard and do the 3 button method ?
Should I have the bootloader unlock or lock or doesn't matter the state of the bootloader ?

Zirconiumirish said:
When you say "flash" you mean use TWRP ? or only put the firmware on the sdcard and do the 3 button method ?
Should I have the bootloader unlock or lock or doesn't matter the state of the bootloader ?
Click to expand...
Click to collapse
Yes i mean dload method with three button..not need bootloader status unlock or lock..
All you have to make sure is to be on stock recover and right firmware

hassanjavaid8181 said:
Yes i mean dload method with three button..not need bootloader status unlock or lock..
All you have to make sure is to be on stock recover and right firmware
Click to expand...
Click to collapse
Okay thanks lol
The last attempt was "Error" and stop at 5% and another one saying incompatible firmware.
So i'm downloading couple of firmware and trying to reinstall through the 3 button method.

Zirconiumirish said:
Okay thanks lol
The last attempt was "Error" and stop at 5% and another one saying incompatible firmware.
So i'm downloading couple of firmware and trying to reinstall through the 3 button method.
Click to expand...
Click to collapse
Give some details about your model number etc..if i will find i will drop a link here
Good luck..

hassanjavaid8181 said:
Give some details about your model number etc..if i will find i will drop a link here
Good luck..
Click to expand...
Click to collapse
Oh thanks a lot
That's the :
Honor 8 Pro 64 GB (Europe)
DUK-L09
Thanks

Zirconiumirish said:
Oh thanks a lot
That's the :
Honor 8 Pro 64 GB (Europe)
DUK-L09
Thanks
Click to expand...
Click to collapse
I try once again with an older firmware and the latest but always told me " Install failed at about 5%) or Not recognize.
Do you know why it always told ma that message ?
I though I was able to access to the TWRP recovery but only when I lock and unlock the bootloader.
I have a message who told me
ERROR MODE
Func NO : 11 (recovery image)
Error NO : 2 (load failed)
Thanks for your help.
Michael

Zirconiumirish said:
I try once again with an older firmware and the latest but always told me " Install failed at about 5%) or Not recognize.
Do you know why it always told ma that message ?
I though I was able to access to the TWRP recovery but only when I lock and unlock the bootloader.
I have a message who told me
ERROR MODE
Func NO : 11 (recovery image)
Error NO : 2 (load failed)
Thanks for your help.
Michael
Click to expand...
Click to collapse
If you unlock the bootloader you will be in twrp.
Ok i got the device details as DUK-L09 but any idea on the region that was present in build number as DUK-L09CXYZBXYZ.
IF you know the build number it will of great help to proceed.
Have you taken twrp backup?

shashank1320 said:
If you unlock the bootloader you will be in twrp.
Ok i got the device details as DUK-L09 but any idea on the region that was present in build number as DUK-L09CXYZBXYZ.
IF you know the build number it will of great help to proceed.
Have you taken twrp backup?
Click to expand...
Click to collapse
Okay thanks for your help
My region is EUROPEAN this one should be the asian one:
Russian is L09C10B120a
European L09C432B120a
I didn't have any backup unfortunately of the TWRP.
I was able to access to the fastboot mode
I unlock and relock the bootloader but instead of falling on the TWRP Recovery I have the message I told you before with Error.
And sometime the same error number but instead of recovery it show boot or something like that..
I don't know what's going wrong with the three button method because I correctly format the SD Card and create the folder in it and try couple of firmware and always error ..
And I try old firmware and new firmware..
Thanks a lot for your time
Michael

Zirconiumirish said:
Okay thanks for your help
My region is EUROPEAN this one should be the asian one:
Russian is L09C10B120a
European L09C432B120a
I didn't have any backup unfortunately of the TWRP.
I was able to access to the fastboot mode
I unlock and relock the bootloader but instead of falling on the TWRP Recovery I have the message I told you before with Error.
And sometime the same error number but instead of recovery it show boot or something like that..
I don't know what's going wrong with the three button method because I correctly format the SD Card and create the folder in it and try couple of firmware and always error ..
And I try old firmware and new firmware..
Thanks a lot for your time
Michael
Click to expand...
Click to collapse
What was your exact build before having all these issues. That would help me to provide you the correct link for right firmware

shashank1320 said:
What was your exact build before having all these issues. That would help me to provide you the correct link for right firmware
Click to expand...
Click to collapse
Hi sorry for the late answer.
I have my bootloader locked and the original recovery.
I would like to install the tock firmware and try couple without any success.
I don't remember what was the build number because I didn't have any backup but I did a preorder so it could be the first firmware that they put in it after production.
I try couple and always say "firware not found or incompatibility" I don't really understand because they are all for Honor 8 pro and european version..
Thanks for your help..

We should create a general recovery method because many people have similar recovery issues.
In my case "dload recovery" does not work and always fails at 5% (I've tried over 10 ROMs).
As I know this means that UPDATE.APP does not match the current Honor 8 pro version (you cannot downgrade), region, modelname etc...

Please try this method..