Develop Bugs

[Q] urgent please help I rooted my phone.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
I got this after rooting my phone and I want to update the phone but I can't. Is there a possible fix? All I did was root and add 2 apps to the system folder (along with using some root programs that are Freedom and Link 2Sd)
Please Help

Unroot. Your phone. If you root your phone u can not make updates OTA.
Sent from my GT-N7100

You can upgrade software via odin
download latest firmware from Samsung-update
and flash it via odin and then root again
or use touchwiz custom roms with latest software

I unrooted and I still get that error ;/ any suggestions?

Download titanium backup
Clear data for two apps i.e.
Sysscope
Enterprise sysscope service
Carefully only wipe data nothing else
Reboot and ota update
Sent from my GT-N7100 using xda premium

thethiny said:
I unrooted and I still get that error ;/ any suggestions?
Click to expand...
Click to collapse
the problem is ur system status is "modified"..
its really very difficult to turn ur device normal once rooted.i tried everything from unrootin, clearing sys scope data and all that....but no success
i was in the same condition in which u currently are..then i thought there's no need to get my status normal..so i flashed a custom rom to get the latest update on my phone
Sent from my AweSoMe ☆♥Note2♥☆

mannyvinny said:
the problem is ur system status is "modified"..
its really very difficult to turn ur device normal once rooted.i tried everything from unrootin, clearing sys scope data and all that....but no success
i was in the same condition in which u currently are..then i thought there's no need to get my status normal..so i flashed a custom rom to get the latest update on my phone
Sent from my AweSoMe ☆♥Note2♥☆
Click to expand...
Click to collapse
Call me bad luck brian, I dropped the phone today and I broke the corner, my warranty covers that (1 month hardware warranty). So they need a non modified phone :/ also could you explain to me the flashing ot updates thing?

thethiny said:
Call me bad luck brian, I dropped the phone today and I broke the corner, my warranty covers that (1 month hardware warranty). So they need a non modified phone :/ also could you explain to me the flashing ot updates thing?
Click to expand...
Click to collapse
reset ur flash counter if its raised..download stock rom from sammobile of ur region.flash it via odin..that's it
Sent from my AweSoMe ☆♥Note2♥☆

mannyvinny said:
reset ur flash counter if its raised..download stock rom from sammobile of ur region.flash it via odin..that's it
Sent from my AweSoMe ☆♥Note2♥☆
Click to expand...
Click to collapse
I just rooted with busybox and didn't install any custom OS (I think rooting flashed a custom stock firmware? )
1 more Q, doesn't flashing erase everything?

mannyvinny said:
the problem is ur system status is "modified"..
its really very difficult to turn ur device normal once rooted.i tried everything from unrootin, clearing sys scope data and all that....but no success
i was in the same condition in which u currently are..then i thought there's no need to get my status normal..so i flashed a custom rom to get the latest update on my phone
Sent from my AweSoMe ☆♥Note2♥☆
Click to expand...
Click to collapse
well i just tried tday going back stock again with ketan pre rooted rom and then use triangle away 3.1 and all was fine at 1 go nothing more i did it was all normal , i have tried it before even and everytime it comes to normal and official as triangle away does it all for me, hard luck on ur side
thethiny said:
I just rooted with busybox and didn't install any custom OS (I think rooting flashed a custom stock firmware? )
1 more Q, doesn't flashing erase everything?
Click to expand...
Click to collapse
well after you flash stock firmware via odin just check ur status in download mode if its normal and official all good , if not enter stock recovery and wipe data .cache and if you have ever used any custom recovery then ur binary count can be solved using triangle away

thethiny said:
I just rooted with busybox and didn't install any custom OS (I think rooting flashed a custom stock firmware? )
1 more Q, doesn't flashing erase everything?
Click to expand...
Click to collapse
Busy box will set your device status to modified.
Boot into download mode and check your flash counter is zero. If not download and run triangle away.
Once that's done, use Odin to flash stock firmware and then factory reset.
Sent from my GT-N7100

I had the same issue. I use AllShare Cast a lot and it (and other DRM dependent) apps won't work with a status of "modified." As everyone's figured out, newer stock ROMs have kernel modifications that prevent using Triangle Away to reset the counter/status.
Here's what I found to be the easiest way to get back to stock. Go to Samfirmware or Samsung-Updates and find an older ROM that's at least a couple of months old and install it using Odin. Use Triangle Away to reset your counter. If it doesn't work the ROM you have installed is too new and has Samsung's kernel modifications. After that's done, use SuperSU's unroot function to unroot your phone. After that you can download the latest stock ROM and install it via Odin; your status will be unaffected. I did all this without reseting so my apps and settings were untouched.

BarryH_GEG said:
I had the same issue. I use AllShare Cast a lot and it (and other DRM dependent) apps won't work with a status of "modified." As everyone's figured out, newer stock ROMs have kernel modifications that prevent using Triangle Away to reset the counter/status.
Here's what I found to be the easiest way to get back to stock. Go to Samfirmware or Samsung-Updates and find an older ROM that's at least a couple of months old and install it using Odin. Use Triangle Away to reset your counter. If it doesn't work the ROM you have installed is too new and has Samsung's kernel modifications. After that's done, use SuperSU's unroot function to unroot your phone. After that you can download the latest stock ROM and install it via Odin; your status will be unaffected. I did all this without reseting so my apps and settings were untouched.
Click to expand...
Click to collapse
Will give it a shot
Edit:Luckily the "Status" thing glitched out and it ALWAYS shows Scanning... , no modified , no official, nothing. it lagged, so they agreed on fixing it. I'll send it later for repairs. thanks.

I have a Samsung Note 2 N7105 on stock EE UK firmware, rooted, and with chainfire's TriangleAway installed and used to reset the flash counter.
I can receive OTA updates via KIES and the phone's onboard updater, but I may have to restart the phone and run the update in the 5 minutes after reboot (during which TriangleAway suppresses superuser - tick System Modified Workaround in the settings), and also root after every update. It's a bit erratic. Depending whether I have triggered the modification scanner, my phone status may be Normal or Modified. Right now it's still Normal despite ~1000 hours of uptime.
It wasn't originally EE firmware, I had a couple of months of frankenstein CSC code. I flashed EE a couple OTA updates ago, then OTA/Kies'd it to its current state.
I dunno about AllShare Cast, I don't use it.

I've had people on here tell me that Samsung have to honour their warranty in the EU on rooted phones.
After lots of emails they sure as hell won't fix mine!
So thanks for the unrooting advice, I'll try this and try sending it back again

porcupineadvocate said:
and also root after every update. It's a bit erratic.
Click to expand...
Click to collapse
Use Mobile odin pro application for OTA or ROM flashing to keep device rooted.
So no need to root every time you change firmware.
sent from my GT-N7100. Press thanks if I helped..

BarryH_GEG said:
I had the same issue. I use AllShare Cast a lot and it (and other DRM dependent) apps won't work with a status of "modified." As everyone's figured out, newer stock ROMs have kernel modifications that prevent using Triangle Away to reset the counter/status.
Here's what I found to be the easiest way to get back to stock. Go to Samfirmware or Samsung-Updates and find an older ROM that's at least a couple of months old and install it using Odin. Use Triangle Away to reset your counter. If it doesn't work the ROM you have installed is too new and has Samsung's kernel modifications. After that's done, use SuperSU's unroot function to unroot your phone. After that you can download the latest stock ROM and install it via Odin; your status will be unaffected. I did all this without reseting so my apps and settings were untouched.
Click to expand...
Click to collapse
Just tried this,
1-When Flashing an Old (couple of months back) or any ROM other than 4.1.2 , I get a SAMSUNG loop.
2-I flashed the Stock XEF DME6 ROM. Now my baseband is different, was DMF1 , now DME4.
3-I keep on getting CP: Unknown when dialing *#1234# , and I always have no Signal , and Airplane mode is grayed out.
Any help?

You have lost your efs or imei code. Go to this thread.
sent from my GT-N7100. Press thanks if I helped..

MBariya said:
You have lost your efs or imei code. Go to this thread.
sent from my GT-N7100. Press thanks if I helped..
Click to expand...
Click to collapse
as long as I'm restoring my EFS, it is working, but as soon as I restart it happens again, and I must restore it again.

Please read out that guide and information from above posted link. Dr.ketan has provided information regarding why this happens.
sent from my GT-N7100. Press thanks if I helped..

|Guide|How-To| Root & Install Custom Recovery for 4.3 / 4.4 Update |16 July 2014 |

|Guide|How-To| Root & Install Custom Recovery for 4.3 / 4.4 Update |16 July 2014 |
Warning: Following any of these instructions will void your warranty, and could possibly cause irreparable harm to your device (i.e. bricked). If you do not understand these risks, stop here and do not proceed. If you do not know how to use Odin, stop here and do not proceed. I am not responsible for anything that happens to your device. YOU chose to follow this guide.
If you have not updated to 4.3, go here.
If you have not updated to 4.4, go here.
Finally, there is no guarantee that either method will work for you.
Root Method #1:
The first thing you should try is CF-Autoroot since this has worked for many users.
If you successfully root with this method, you can simply install Goo Manager or ROM Manager and install recovery.
This method failed for me after many attempts.
Edit:
Here is some potentially useful info for root method #1 from ansonantonym.
Root Method #2:
1) Reboot in to download mode
2) Flash TWRP with Odin via PDA
3) Reboot to recovery then flash SuperSu and the Knox Remover
4) Reboot
5) Download SuperSu from the Play Store
6) Open SuperSu and update the binary when prompted
7) Reboot
8) Enjoy rooted 4.3/4/4
Downloads:
Odin
TWRP (Odin flashable tar)
SuperSu (v1.65)
SuperSu (v2.01)
DE-SAMSUNGNIZER_KNOX_REMOVAL_SCRIPT_V1.0
If you found another method that worked for you, please post here so that others may benefit.
If you are uncertain about any of the steps above, please ask your questions here before proceeding.
Please be sure to thank Chainfire, Dees_Troy, and Kaito95.
*****

Noob here, first off I unrooted a while ago, then took the ota 4.3, is the bootloader locked? Cause according to the cf auto root site if your bootloader is locked you'll probably brick your phone if you flash the auto root? Also do these steps have to be in order? I tried rooting by other means and installing supersu first, wouldn't work so I removed knox with the script, and then updated supersu in the play store and still nothing, can I try to flash cf auto root now and then update supersu in the play store? Thanks a million, need this thing rooted
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

jeremyds45 said:
Noob here, first off I unrooted a while ago, then took the ota 4.3, is the bootloader locked? Cause according to the cf auto root site if your bootloader is locked you'll probably brick your phone if you flash the auto root? Also do these steps have to be in order? I tried rooting by other means and installing supersu first, wouldn't work so I removed knox with the script, and then updated supersu in the play store and still nothing, can I try to flash cf auto root now and then update supersu in the play store? Thanks a million, need this thing rooted
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Well, I'm not bricked, so I think that answers your question about the bootloader.
Do you have a custom recovery installed? I assume so since you say you flashed the Knox remover script. If you do have a custom recovery installed, just flash the SuperSu zip, then update in the Play Store.

upndwn4par said:
Well, I'm not bricked, so I think that answers your question about the bootloader.
Do you have a custom recovery installed? I assume so since you say you flashed the Knox remover script. If you do have a custom recovery installed, just flash the SuperSu zip, then update in the Play Store.
Click to expand...
Click to collapse
Ah it is so nice to have root again... Thank you so much for putting up with a noob.
Crazy events of a noob that lead me to root
Installed ota 4.3
Tried to root and install superuser by odin and then custom recovery to flash
Root didn't happen because of knox
Could only get to CWM custom recovery if it was right after odin and battery pull?...
Flashed the script to remove knox, which did remove knox
Tried the same root method as above and no root access
Tried supersu and then updating in play with no success
Changed security update settings etc nothing
Reset delvik, cache, permissions, etc nothing
Different root method and files for odin, and custom recovery stuck
Used files from this thread, went into custom recovery and flashed supersu
Installed supersu from play store...
Updated the binary using custom recovery
Rebooted...
ROOT access, all root applications work fine and root sticks even after reboots
I never messed with cf auto root method
THANK you guys for your time effort and sharing, helps noobs out like me a lot!

Sweet! I've missed root since I upgraded using the OTA file you provided. Looking forward to much other great things coming from you

Thank You
upndwn4par said:
Warning: Following any of these instructions will void your warranty, and could possibly cause irreparable harm to your device (i.e. bricked). If you do not understand these risks, stop here and do not proceed. If you do not know how to use Odin, stop here and do not proceed. I am not responsible for anything that happens to your device. YOU chose to follow this guide.
If you have not updated to 4.3, go here. Make sure you understand the risks and uncertainties described in the OP.
Finally, there is no guarantee that either method will work for you.
Root Method #1:
The first thing you should try is CF-Autoroot since this has worked for many users.
If you successfully root with this method, you can simply install Goo Manager or ROM Manager and install recovery.
This method failed for me after many attempts.
Root Method #2:
1) Reboot in to download mode
2) Flash TWRP with Odin via PDA
3) Reboot to recovery and flash SuperSu.
4) Flash the Knox Remover
5) Reboot
6) Download SuperSu from the Play Store
7) Update the binary when prompted
8) Reboot
8) Enjoy 4.3
Downloads:
Odin
TWRP (Odin flashable tar)
UpdateSuperSu
If you found another method that worked for you, please post here so that others may benefit.
If you are uncertain about any of the steps above, please ask your questions here before proceeding.
*****
Click to expand...
Click to collapse
Method two absolutely worked. Thank you so much. I was scared to flash TWRP but knowing you did it gave me the courage. Have full root and happy

questions about this root
Hi, I'm a little nervous with this root but I need the root as the phone is useless without it.
I have the [email protected] galaxy s3 I747 will all these files work with it im just double checking.
Also do you flash the knox remover the same way as you flash other things with the pda button?
Will I still be able to do factory restores?
Also I saw that knox remover removes a lot of apps, Can you install these deleted apps from the market if you need too?
THanks please let me know asap.

THANKS!!!! your a lifesaver didn't know how much longer i could take without root

Dunno where you guys got your 4.3 update from and how you got it working but I did the OTA and Root just does not want to stick. I used knox remover and Cf auto root but it loses root after a restart. SuperSu never opens and crashes as soon as you open it. I have a feeling Cf auto root is just not compatible for the ota 4.3 i747??

bkong said:
Dunno where you guys got your 4.3 update from and how you got it working but I did the OTA and Root just does not want to stick. I used knox remover and Cf auto root but it loses root after a restart. SuperSu never opens and crashes as soon as you open it. I have a feeling Cf auto root is just not compatible for the ota 4.3 i747??
Click to expand...
Click to collapse
use the TWRP method worked perfected for me

Thanks

PimpMyPC said:
Hi, I'm a little nervous with this root but I need the root as the phone is useless without it.
I have the [email protected] galaxy s3 I747 will all these files work with it im just double checking.
Also do you flash the knox remover the same way as you flash other things with the pda button?
Will I still be able to do factory restores?
Also I saw that knox remover removes a lot of apps, Can you install these deleted apps from the market if you need too?
THanks please let me know asap.
Click to expand...
Click to collapse
The second method worked great. I believe (and the way that worked for me) that you use your custom recovery to flash the knox script, not using Odin and pda. I don't think it removed anything other than knox, there is a different script for removing knox and att bloatware. Should still be able to factory reset... But can't guarantee that.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Root & Knox
When you go to Settings/More tab/Security/Device Administrators, You have KNOX and Android Device Manage. Both are unchecked on mine. So does that mean Knox is not working if unchecked and safe to try to Root?????

tailgunner9 said:
When you go to Settings/More tab/Security/Device Administrators, You have KNOX and Android Device Manage. Both are unchecked on mine. So does that mean Knox is not working if unchecked and safe to try to Root?????
Click to expand...
Click to collapse
Those settings are just for granting device administrator privileges. If unchecked, Knox is still doing it's thing, just not at an administrative level.
Yes, it is safe to try and root.
I have Android Device Manager as admin. That way if I ever lose my device I can just log in to the Play Store and locate and / or wipe the device.

To do this just flash the recovery.img file using odin and clicking the pda button correct?

Is there a way to freeze Knox instead of deleting it in the event I would want to go back to full stock?

After you are rooted, use an app like Titanium Backup(pro) or My Backup pro. Both will freeze it.

Root
If some of you out there use Root Method #2 and it works well and No problems, Please post and let us all know. Thanks

tailgunner9 said:
If some of you out there use Root Method #2 and it works well and No problems, Please post and let us all know. Thanks
Click to expand...
Click to collapse
I tried method 1 and failed.
Then tried method 2, but using a CMW tar that was posted yesterday.
I seem to be rooted!
So far no issues.. Just need to get everything setup as I had it in the leak.

indymx said:
I tried method 1 and failed.
Then tried method 2, but using a CMW tar that was posted yesterday.
I seem to be rooted!
So far no issues.. Just need to get everything setup as I had it in the leak.
Click to expand...
Click to collapse
Thanks indymx, may get the nerve up to try it on my AT&T S3. Let me know if you run into any problems. Guess Rom Manager and other programs that require Root are working Ok and you have rebooted few times to be sure it keeps Root?? Have Happy Thanksgiving.

[Q] SGH-I317M with KNOX can not be rooted

Mine Note II is SGH-I317M with baseband version of I317MVLUCMK5 and KNOX.
I have tried CF-Auto-Root and Root SuperSU but weren't able to root my note II.
I have tried using different version of Odin, reinstalled the USB driver and tried using philz touch and cwm6 root to backup and root.
Nothing worked........Can't even start SuperSU.....
KNOX keep giving me security notice "An attempt to access a secure area on your device without authorisation has been blocked."
I also tried an updated Superuser. Still nothing worked....
Any idea anyone?
Thank you very much.

Stewegg said:
Mine Note II is SGH-I317M with baseband version of I317MVLUCMK5 and KNOX.
I have tried CF-Auto-Root and Root SuperSU but weren't able to root my note II.
I have tried using different version of Odin, reinstalled the USB driver and tried using philz touch and cwm6 root to backup and root.
Nothing worked........Can't even start SuperSU.....
KNOX keep giving me security notice "An attempt to access a secure area on your device without authorisation has been blocked."
I also tried an updated Superuser. Still nothing worked....
Any idea anyone?
Thank you very much.
Click to expand...
Click to collapse
You need to disable knox first
http://forum.xda-developers.com/showthread.php?p=49860203

Stewegg said:
Can't even start SuperSU
Click to expand...
Click to collapse
This is really weird, when I did this to my SGH-I747/M it was updated to stock 4.3 so it had KNOX and I got the same message as you but to disable it, all I did was open SuperSU and it prompts me to disable KNOX and then it's "fully" rooted and I could install a custom recovery after that.
I know it worked on the S3 because it's currently rooted running a custom ROM. Are you using the right version of Odin? I was trying to use 1.85 I think it was and it wasn't working at first, I tried 3.09 and it worked like a dream.
Did you remember to go into the Security Settings and turn off Reactivation Lock? I know this can play a factor when rooting with KNOX.
Also, KNOX never goes away, even though I'm running an AOSP ROM now on the S3, it still shows the KNOX counter with 0x1, even with it disabled. I can also not get any ROM's lower then 4.3 to work anymore so I can no longer run RootBox 4.2.2 on the S3.
I'm not sure if it's just me, or just my phone, but since that KNOX update was already on it when I got the phone used, it will not let me go to any ROM's lower then 4.3

VeeDaub said:
This is really weird, when I did this to my SGH-I747/M it was updated to stock 4.3 so it had KNOX and I got the same message as you but to disable it, all I did was open SuperSU and it prompts me to disable KNOX and then it's "fully" rooted and I could install a custom recovery after that.
I know it worked on the S3 because it's currently rooted running a custom ROM. Are you using the right version of Odin? I was trying to use 1.85 I think it was and it wasn't working at first, I tried 3.09 and it worked like a dream.
Did you remember to go into the Security Settings and turn off Reactivation Lock? I know this can play a factor when rooting with KNOX.
Also, KNOX never goes away, even though I'm running an AOSP ROM now on the S3, it still shows the KNOX counter with 0x1, even with it disabled. I can also not get any ROM's lower then 4.3 to work anymore so I can no longer run RootBox 4.2.2 on the S3.
I'm not sure if it's just me, or just my phone, but since that KNOX update was already on it when I got the phone used, it will not let me go to any ROM's lower then 4.3
Click to expand...
Click to collapse
Where is the Reactivation Lock located?
I can not find it in the Security Settings.

mrevankyle said:
You need to disable knox first
http://forum.xda-developers.com/showthread.php?p=49860203
Click to expand...
Click to collapse
I was following the steps in the post you have posted.
When I tried to flash the DrKetan_MultiTool_AdvanceV5, it gives me an error: E:signature verification failed. and stopped the flash.
Any idea?

Stewegg said:
I was following the steps in the post you have posted.
When I tried to flash the DrKetan_MultiTool_AdvanceV5, it gives me an error: E:signature verification failed. and stopped the flash.
Any idea?
Click to expand...
Click to collapse
hey man i have the same phone as you, just found an easy way to root it after struggling. Just updated to Stock 4.3 Bell Firmware using odin, completely fresh phone.
How to root it:
1. Flash philz recovery in odin "philz_touch_6.19.3-t0lteatt.tar.md5" (Download mode= Vol Down + Home + Power)
2. Reboot back into android once
3. Power off phone
4. Boot into recovery (Vol Up + Home + Power)
5. Goto philz settings->Reroot rom (or something to that effect)
6. Recovery will tell you done, and to reboot and install SuperSU from Play Store
7. Reboot download and install SuperSU from Play Store
8. Open SuperSU it will immediately ask if you would like to disable Knox.. say yes
9. Done
Link to philz recovery tar for our phone i317M
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lteatt/philz_touch_6.19.3-t0lteatt.tar.md5

Does this work?
My wife's Rogers note2 is bone stock running I317MVLUCMK5.
She is paranoid about Knox and possibly killing her phone.
She wants me to get it rooted, but I'm struggling to find a clear cut answer.
Also, it would be better if anyone knows how to (if possible) downgrade to 4.1.2 and start from there... As I know how to do that one like the back of my hand.
Sent from my SGH-I317 using Tapatalk

Stewegg said:
Mine Note II is SGH-I317M with baseband version of I317MVLUCMK5 and KNOX.
I have tried CF-Auto-Root and Root SuperSU but weren't able to root my note II.
I have tried using different version of Odin, reinstalled the USB driver and tried using philz touch and cwm6 root to backup and root.
Nothing worked........Can't even start SuperSU.....
KNOX keep giving me security notice "An attempt to access a secure area on your device without authorisation has been blocked."
I also tried an updated Superuser. Still nothing worked....
Any idea anyone?
Thank you very much.
Click to expand...
Click to collapse
Simple. First get the root. Like the su binary and stuff. once you are rooted get suersu. What I mean by first get root is literally get root through a program or something. After this you will have root but you wont have root access. So get supersu now and launch the app. It will ask to update your su binary. Say yes. then the thing will say something about knox then ask you if you want to try to disable knox. Tap yes and knox should be disabled and your su binary should be updated and working.

I'm exactly in the middle of nowhere .. Try to root with CF method. After the first try and reboot. I got the knox alert "unauthorized, bla, bla" the thing is that I can't get the full root or return to stock. Also when I tried to install knox in order to Uninstaller it, I can't. My phone is not allowed to use knox any more... I already tried to download Su and update it in order to disable knox with no success.... Stupid knox and stupid 4.3:crying:

My phone is I317M Rogers, it run stock 4.3. I followed this guide, http://forum.xda-developers.com/showthread.php?t=2618261 rooted success.

Eun-Hjzjined said:
Does this work?
My wife's Rogers note2 is bone stock running I317MVLUCMK5.
She is paranoid about Knox and possibly killing her phone.
She wants me to get it rooted, but I'm struggling to find a clear cut answer.
Also, it would be better if anyone knows how to (if possible) downgrade to 4.1.2 and start from there... As I know how to do that one like the back of my hand.
Sent from my SGH-I317 using Tapatalk
Click to expand...
Click to collapse
ifentanez said:
I'm exactly in the middle of nowhere .. Try to root with CF method. After the first try and reboot. I got the knox alert "unauthorized, bla, bla" the thing is that I can't get the full root or return to stock. Also when I tried to install knox in order to Uninstaller it, I can't. My phone is not allowed to use knox any more... I already tried to download Su and update it in order to disable knox with no success.... Stupid knox and stupid 4.3:crying:
Click to expand...
Click to collapse
koodiifin said:
hey man i have the same phone as you, just found an easy way to root it after struggling. Just updated to Stock 4.3 Bell Firmware using odin, completely fresh phone.
How to root it:
1. Flash philz recovery in odin "philz_touch_6.19.3-t0lteatt.tar.md5" (Download mode= Vol Down + Home + Power)
2. Reboot back into android once
3. Power off phone
4. Boot into recovery (Vol Up + Home + Power)
5. Goto philz settings->Reroot rom (or something to that effect)
6. Recovery will tell you done, and to reboot and install SuperSU from Play Store
7. Reboot download and install SuperSU from Play Store
8. Open SuperSU it will immediately ask if you would like to disable Knox.. say yes
9. Done
......
Click to expand...
Click to collapse
koodiifin's way worked perfectly!
Thank you koodiifin!

[GUIDE] how to root Sph-L710/L710T S3 4.4.2 (updated as of 8/19/2015)

I'm sorry i had the wrong links and because of this i had miss information. So i formally apologize by updating with the proper links.
this first method doesn't work with the Sph-L710T or the Sph-L710 on NJ2/NJ3
First method: You can root the stock 4.4.2 ND8/NDC:laugh:
1st. Make sure your on 4.4.2 ND8 or NDC
2nd. Download Towel Root
3rd. Place Towel Root in sdcard or internal storage
4th. With any file manager find and install Towel Root
5th. Open Towel Root and well root
6th. Go to play store and download https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en and also https://play.google.com/store/apps/details?id=stericson.busybox&hl=en let super user update the binary
7th. Flash any recovery you want {personally i went with PhilZ Touch (this was before PhilZ had a root Option)}
8th. Enjoy your rooted stock 4.4.2 ND8/NDC
Down below is one more way too root Stock ND8/NDC/NJ2/NJ3 or NF4/OA3 (L710T) and basically any other update
(link to the almighty ODIN)
Second Method: mostly recommended
1st. Odin flash TWRP
2nd. In Odin choose PDA, PA or AP then select the TWRP Tar you just downloaded
3rd. Make sure Auto reboot is unchecked (also at this time your s3 should be in download mode)
4th. Hit start and let Odin let it finish!!
5th. Hold power button to turn off your S3, after it turns off about 10 seconds later it will turn back on to the battery charging screen so before that quickly hold Volume+ and Home, to boot into recovery
6th. now your in TWRP
7th. so to root your stock rom with TWRP flash the following file SuperSU.zip by Chain fire (pro tip. Install any other custom recovery the same way I did for TWRP above if it is in .tar format)
and here is Philz recovery for the D2Lte 6.48.4 ( which you must flash in TWRP)
and here is TWRP that was made specifically for the D2Rephersher/triband/L710T TWRP (which you must flash in a recovery)
Third method Most recent.
Hidyman said:
This is in reference to Samsung Galaxy S3 for Boost Mobile SPH-L710.
Just want to let anyone out there that updated their Boost S3 to L710VPUC0J1 know that you can still root and/or ROM your phone.
Use the instructions to (use Odin to) update the recovery to TWRP first (in the second set of instructions). I had trouble trying to go right to PhilZ Recovery (which I believe is based off of ClockWorkMod). I Had to do the TWRP (twrp-2.8.7.0-d2spr.img.tar) first.
It was the only way to get it to actually accept the recovery, not sure why, maybe because the latest Samsung firmware fixed an exploit or two.
This is an older phone, but it is still a viable one.
I hope this helps someone out there.
It took me a while to figure this quandary out.
As always this WILL flag KNOX, but I'm sure this won't be an issue at this date and time (8/2016).
Click to expand...
Click to collapse

work on ND8 rom? sprint phone?

Tekone said:
work on ND8 rom? sprint phone?
Click to expand...
Click to collapse
i want to say yes but towel root does come with a warning that it might brick your device.....but i want to say yes since most things that can be done to the ND8 can be done to the NDC and also in reverse order.....so try it and report back it will be good to know if it works on both bootloaders

Sprint S3 Android 4.4.2 ND8-It works!
I just used this method to root my Sprint S3 running Android 4.4.2 and ND8, since my USB port is on the fritz, and it worked successfully. I have root, and was able to do a full apps backup with Titanium Backup, and gained root access in ES File Explorer. Next, download and install a custom backup. Thanks, great job, and could not have been made easier to do!

oops
Rooted the phone in one click. Unfortunately, I lost all data (no 3G or 4G connection). Did I goof? I'm looking in the stickies and can't seem to find an answer. I'd appreciate any help I can get.

henhun said:
Rooted the phone in one click. Unfortunately, I lost all data (no 3G or 4G connection). Did I goof? I'm looking in the stickies and can't seem to find an answer. I'd appreciate any help I can get.
Click to expand...
Click to collapse
ND8 or NDC? have you tried updating your profile/PRL?

6th_Hokage said:
ND8 or NDC? have you tried updating your profile/PRL?
Click to expand...
Click to collapse
Ya know. People keep talking about ND8 and ND___. I have no idea what that means. I know I should be embarrassed.
UPDATE: FIGURED IT OUT, BASEBAND VERSION. GOTCHA. IT IS NDC.
I was JUST coming back to update my post. I DID update the PRL and restarted my phone. That seems to have done the trick. Thank GOD I got my data connection back!! It worked. Even though I found the info somewhere else, thank you so much for the quick reply. PRL update fixes the problem. You're awesome.

I used it before i had a custom recovery. And on reboot i wouldnt have root. After i ran it root checker told me i was rooted then reboot killed. I installed philz and all was ok
Sent from my SPH-L710 using XDA Free mobile app

jbnorton0524 said:
I used it before i had a custom recovery. And on reboot i wouldnt have root. After i ran it root checker told me i was rooted then reboot killed. I installed philz and all was ok
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
many users of basically the same phone report different things with every root method out there. If it worked for you that's great tell other users what you did for it to work and if it didn't work, then ask for help and you will get help; some people don't have success with any method while others do with all of the methods.....my phone falls under every method.....

Successful Towelroot on VM Galaxy S3 4.4.2.NDC
6th_Hokage said:
you can root the stock 4.4.2
first step make sure your on 4.4.2
second step download Towel Root
third step place Towel Root in sdcard or internal storage
fourth step with any file manager find and install Towel Root
fifth step root
sixth step go to play store and download Superuser (Chainfire) and also Busy Box (Stericson) let super user update the binary
seventh step flash any recovery you want personally i went with Philliz Touch
eighth step if you want flash a custom rom now if not enjoy your rooted stock 4.4.2
Click to expand...
Click to collapse
Straight forward, fast and easy. I did notice the following:
1) Updating binary reported it did not successfully install. I've seen this before on other devices, but everything worked well. Ext SD and Camera all OK. Everything works fine so far - Titanium, Nandroid, Root Browser, etc.
2) At one point, I was directed to install Busy Box. Having done this on other devices, I said "Yes" and installed it.
3) I see that my device now shows Device Status as Custom ( was Normal before, if I remember correctly). Is this due to Busy Box?
4) Is Device Status the only way to know the KNOX Status? I see no yellow triangle as I did on my Galaxy Reverb.
5) I got a Google warning to uninstall Towelroot since it is usafe and a security exploit. I understand that.
I would like to verify the KNOX status and if tripped in the Towelroot process, to let potential users know of that possibility.
Thank You! And thanks to everyone who has continued to work on keeping root free!
Dave

dave260 said:
Straight forward, fast and easy. I did notice the following:
1) Updating binary reported it did not successfully install. I've seen this before on other devices, but everything worked well. Ext SD and Camera all OK. Everything works fine so far - Titanium, Nandroid, Root Browser, etc.
2) At one point, I was directed to install Busy Box. Having done this on other devices, I said "Yes" and installed it.
3) I see that my device now shows Device Status as Custom ( was Normal before, if I remember correctly). Is this due to Busy Box?
4) Is Device Status the only way to know the KNOX Status? I see no yellow triangle as I did on my Galaxy Reverb.
5) I got a Google warning to uninstall Towelroot since it is unsafe and a security exploit. I understand that.
I would like to verify the KNOX status and if tripped in the Towelroot process, to let potential users know of that possibility.
Thank You! And thanks to everyone who has continued to work on keeping root free!
Dave
Click to expand...
Click to collapse
Knox only notifies Samsung that your device isn't stock anymore not necessarily rooted like with a custom recovery and then flashed mods and what not but if you Odin the stock rom it resets the counters so Samsung will never know....and that i have noticed TowelRoot doesn't trip that counter.....only the recoveries and when you update the binary (<---completely forgot to fix that) you must hit the option normal not TWRP/CWM

churninern said:
I just used this method to root my Sprint S3 running Android 4.4.2 and ND8, since my USB port is on the fritz, and it worked successfully. I have root, and was able to do a full apps backup with Titanium Backup, and gained root access in ES File Explorer. Next, download and install a custom backup. Thanks, great job, and could not have been made easier to do!
Click to expand...
Click to collapse
That's great news because same boat here. It worked on 4.3 as well.
I had the phone hacked before and something must not be fully stock so the Ota fails.
I downloaded a package and mobile odin should flash it properly and then I can root it with this again and install a nice modified TouchWiz rom.

Darkangels6sic6 said:
That's great news because same boat here. It worked on 4.3 as well.
I had the phone hacked before and something must not be fully stock so the Ota fails.
I downloaded a package and mobile odin should flash it properly and then I can root it with this again and install a nice modified TouchWiz rom.
Click to expand...
Click to collapse
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all

Knox Counter and "Device Status"
6th_Hokage said:
Knox only notifies Samsung that your device isn't stock anymore not necessarily rooted like with a custom recovery and then flashed mods and what not but if you Odin the stock rom it resets the counters so Samsung will never know....and that i have noticed TowelRoot doesn't trip that counter.....only the recoveries and when you update the recovery you must hit the option normal not TWRP/CWM
Click to expand...
Click to collapse
Thanks for your response. I may be over thinking these indicators. All I did was Towelroot, successfully. On the phone, the "About Device, Status" now says CUSTOM (was "Official"). The Knox counter according to app "Phone Info" shows Knox Counter at 0x0. As you said, since the counter is not tripped, should be no problem on warranty. So then Device Status CUSTOM is not a problem? I'm not really worried about warranty at this point, but I think I'll hold off further mods for another 6 moths.
Thanks again for your help!

6th_Hokage said:
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all
Click to expand...
Click to collapse
Thanks. I tried the md8 and mk3 "mk3 is what it's on". Both just restart and get stuck on splash screen :/.
I have to go to download mode and and restart it that way to boot system back up.
Do you have any other suggestion. I'm not sure what part of the system is altered. It seems like a stock recovery and it's stock firmware "now rooted". Maybe the kernel.
I can't use USB at all.
I'm guessing maybe I should install twrp. Then install a stock zip or try out a 4.3 rom that way. I would like to get to md8 one way or another. Most md8 Roms want you to odin or flash an md8 base.

Darkangels6sic6 said:
Thanks. I tried the ND8 and MK3 "MK3 is what it's on". Both just restart and get stuck on splash screen :/.
I have to go to download mode and and restart it that way to boot system back up.
Do you have any other suggestion. I'm not sure what part of the system is altered. It seems like a stock recovery and it's stock firmware "now rooted". Maybe the kernel.
I can't use USB at all
I'm guessing maybe I should install TWRP. Then install a stock zip or try out a 4.3 rom that way. I would like to get to md8 one way or another. Most ND8 Roms want you to Odin or flash an md8 base.
Click to expand...
Click to collapse
cause they need the ND8 base to work as intended...my suggestion would be to get the usb port on your phone fixed but i don't know how expensive that will be

6th_Hokage said:
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all
Click to expand...
Click to collapse
6th_Hokage said:
cause they need the ND8 base to work as intended...my suggestion would be to get the usb port on your phone fixed but i don't know how expensive that will be
Click to expand...
Click to collapse
I was afraid you would say that.

Holy crap. May I say, I am quite impressed. I never planned on rooting my S3 (I like it that much!) but this just looked so damn easy to do and it was!
For the curious! I have a Virgin Mobile S3, and I'm on Kitkat 4.4.2, baseband NDC. Verified root with Root Checker Basic. No problems with mobile data.
Many thank yous, 6th_Hokage!

strangelady said:
Holy crap. May I say, I am quite impressed. I never planned on rooting my S3 (I like it that much!) but this just looked so damn easy to do and it was!
For the curious! I have a Virgin Mobile S3, and I'm on Kitkat 4.4.2, baseband NDC. Verified root with Root Checker Basic. No problems with mobile data.
Many thank yous, 6th_Hokage!
Click to expand...
Click to collapse
your welcome strangelady and if you want check out the links in my signature area for other cool stuff

added two more t=root methods

[Q] Note 2 not rooted via cf autoroot

Hello,
I've tried to root my Galaxy Note 2 GT N7100 (KitKat 4.4.2) [original, NO custom ROM or CWM]
with
CF-Auto-Root-t03g-gtn7100.tar.md5
via ODIN
as shown in several tutorials.
All seemed passed ok, nothing obviously went wrong, SuperSU appears in the app drawer.
BUT
If started, SU has been be stopped, Root Checker says, the system is very slow and the phone is NOT rooted (properly).
Updating SU via PlayStore is NOT possible, only to deactivate.
Counter is on 1, Triangle away and other system apps don't work, because the phone isn't really rooted
Wipe data also is changing nothing.
So I've now a NON-rooted phone with the counter on 1, updates via OTA were denied, by reasons seen above.
What can I do? Could 'GalaxyNote2Root' be an option?
THX!
KitKat 44.2
BasisBand: N7100XXXUFND3
Kernel: 3.031-1552758
Build: KOT49H.N7100XXUFNE1

Try to flash CWM via Odin

THX
mustafa_1994emad said:
Try to flash CWM via Odin
Click to expand...
Click to collapse
--------
Ohh, THX for you fast reply!
Does
openrecovery-twrp-2.7.2.1-t03g.img
match?
Or alternative: cwm6-root-note2, but this is old (2008)

I tried rooting my N7105 LTE last night and think I am having the same problem mate, hopefully someone can help!

Most important question: Why do you want to root your device?
If you want to run custom roms, forget about root cause you only need a custom recovery (best the recommended one for the rom) flashed with Odin.
Then you can flash any rom you want through this recovery and most of them are pre-rooted, so :good:
Only if you want to be rooted with stock rom I will try to guide you.

THX
Androidwizzard said:
Most important question: Why do you want to root your device?
...
Click to expand...
Click to collapse
Only to prevent KNOX to deny access to the external card and run some apps, which need SU-rights, e.g. Titanium- / efs- Backup and so one.
At last to make TC working again. This app makes the phone freezing (superSU cannot start and hangs).
Thanks for yor reply.

One way to do it:
Flash custom recovery through Odin and afterwards latest SuperSu.
After bootup the app will deactivate Knox.
EDIT: I have not tested, cause I make my own rooted base-roms, so I hope it will work for you.
I can provide you such a base

mustafa_1994emad said:
Try to flash CWM via Odin
Click to expand...
Click to collapse
Yessssssss! Success!
1.
openrecovery-twrp-2.7.2.1-t03g.img (TeamWin) flashed via ODIN 3 (v3.09)
2.
update-superSU.zip loaded (installed) via CWM
3.
KNOX deactivated (superSU)
4.
triangle away
And good is it!
Thanks for all help! --> @Androidwizzard! & @mustafa_1994emad: Your Thanks Meters had been increased with 1
phalanx41

phalanx41 said:
Yessssssss! Success!
1.
openrecovery-twrp-2.7.2.1-t03g.img (TeamWin) flashed via ODIN 3 (v3.09)
2.
update-superSU.zip loaded (installed) via CWM
3.
KNOX deactivated (superSU)
4.
triangle away
And good is it!
Thanks for all help! --> @Androidwizzard! & @mustafa_1994emad: Your Thanks Meters had been increased with 1
phalanx41
Click to expand...
Click to collapse
link for update supersu.zip pls -_-