Develop Bugs

HTC One V FULL How To [Root] & Unlock

Hello Everyone,
When I tried to look up how to Unlock my bootloader and [Root] my HTC One V, I had alittle bit of trouble finding all the right tools and guides to help me achieve this goal. Below I have written for you the exsact steps on how to unlock your bootloader, and successfully [Root] your Android HTC One V. [PLEASE NOTE THAT I HAVE ONLY TRIED THIS ON THE VIRGIN MOBILE VERSION - Any Damages following these steps I do not account for.
- Attached to this post is a zip files that you will need in order to complete this task, the other one please download at http://d-h.st/vSc
DOWNLOAD BOTH FILES BEFORE DOING THESE STEPS
FIRST Task - Unlock the BootLoader
MUST ENABLE USB-Debugging
1. Download the " One_V_All-In-One_Kit_v2.1 " and extract the files somewhere onto your computer.
2. lauch the application located inside the folders.
3. Onced the application is opened, follow the steps located at the top left. "To root the phone. Follow in order"
If you have followed these steps, in your bootloader menu should say "UNLOCKED".
SECOND Task - Flash a recovery
1. In order to flash a recovery for your phone ( Must have USB-Debugging Enabled )
2. Launch the One_V_All-In-One_Kit_v2.1 application again.
3. Select TWRP 2.3.3.0 (GSM) [DO NOT SELECT THE CDMA UNLESS YOU HAVE AN NON USA VERSION OF THIS PHONE.
4. Flash the recovery
THIRD Task - Root Phone
1. After you have flashed your recovery, stay in the bootloader menu
2. move the volume buttoms up or down until the [Bootloader] says "Bootloader Use"
3. Download the "r1-primo-superboot-virginmobile"
4. Extract the files to somewhere on your computer
5. If you have Windows Do the following
A. Run the adb-windows application
B. Run the fastboot-windows application
c. Run the install-superboot-windows.bat file
6. The Phone will go from the Bootloader screen to the HTC start up screen - Let it do its thing. [ Please not the phone will reboot ]
YOU ARE NOW ROOTED.
Download Root Checker to confirm.
Download SuperUser and update the binary.
If you Have any questions please PM me!
If you like this please click the "Thanks" Button!
WizzyCreator

Spam
Sent from my HTC One V using xda app-developers app

R: HTC One V FULL How To [Root] & Unlock
Thanks for the work but there are already 3 or 4 guides dude
Sent from my One V using xda app-developers app

How is my post "Spam"

Not again:banghead::banghead::banghead:
Sent from my One V

First off this does Not belong in the dev section.
Second as stated there are threads about this already like [TUT] How to Unlock Bootloader and Root your Htc One V which is a sticky in the general section.
Thread closed

[TUTORIAL] How to root, flash recovery, deodex Mediatek device (no PC)

This tutorial will teach you how to root, install a custom recovery and deodex the ROM on your Mediatek processor smartphone. You can use this tutorial for other Android devices too, Lenovo or not.
I myself own a Lenovo A390 and I have rooted, installed recovery and deodexed using these software tools, without any pain. And I assure you, it will be extremely rare that anything can go wrong. And you don't need a computer to root or install recovery-yes, you can do it on your phone itself.
But let's get some things straight:
1. Rooting/installing recovery voids your warranty.
2. If you're not using a Lenovo device or a device that runs on a MediaTek processor, I recommend that you search for a version of recovery appropriate for your processor.
3. The chances of damaging your phone using these tools is extremely rare, trust me, but in case anything goes wrong, I, OR THE DEVELOPERS OF THESE TOOLS, OR XDA-DEVELOPERS WILL NOT BE RESPONSIBLE FOR ANY INTERNAL/EXTERNAL DAMAGE TO YOUR PHONE.
How to root your Lenovo a390:
1. Download Framaroot: http://forum.xda-developers.com/showthread.php?t=2130276 Note: Framaroot may not work on all Android devices. Please see compatibility list in the link.
Framaroot is an Android app created by XDA user alephzain. It allows you to root your device directly from your Android device-please click on link above to view full compatibility list. Download and Install this app. If it says "Installation blocked", go to your phone's Settings>Security and tick the "Unknown Sources" box. (Believe me, there are n00bs )
2. Open Framaroot. For the a390, there is only one exploit-Boromir, since it's a Mediatek powered device. Select Boromir.
3. Now you see two buttons: Install Superuser and Install SuperSU. You need to select only one of them. Framaroot will then root your device and install Superuser/SuperSU. (Superuser/SuperSU are apps which control root operations on your device ie. ensure no app uses root features without your permission-it is a MUST.)
The choice is up to you, but I'd recommend Superuser since it's like the Industry standard of rooted Android phones.
4. Reboot your phone. You'll find Superuser installed. Open it, swipe from left to right to access Superuser settings. The su binary is outdated and it'll appear in a red font. Tap it to update su binary.
This is proof enough that your phone is rooted, but if you really need to see, here's one more step.
5. Install Root checker from Google Play Store: https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck
Run this app, and if your phone is rooted, Superuser will come up automatically asking you whether Root Checker should be granted permission- press Yes and root Checker will deliver the result.
That's it-congratulations, you've rooted your a390 without any pain. Now you can flash a recovery, install Busybox, overclock your phone, get rid of the dumb apps Lenovo has included with the a390.... Enjoy! :laugh:
How to install a recovery
Now, there are two recoveries that rule the Android universe: ClockworkMod Recovery (CWM), and TeamWin Recovery Project (TWRP). The bad news is, neither is officially available for the Lenovo A390 or most of MediaTek devices. But where there's a will, there's a way- and some anonymous Android developer has created TWRP recoveries for the entire Lenovo smartphone series. <salute to the unsung hero> I used one specially customised for the A390, and it works fabulously.
First of all, ensure that your phone is rooted. If not, read the tutorial above.
1. Download this recovery.img file from this Google Drive: https://drive.google.com/file/d/11-...c9b-MfFTWpi9D_vBI0oVISPgRVcB/edit?usp=sharing
2. Install Recovery Tools-Flasher from the Google Play Store: https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
3. Now press "Flash Recovery" button, it will open a file browser. Select the recovery.img file you downloaded from the file browser.
4. It should show a dialog box that says Flashing done. Press OK to boot into recovery. Press OK, and you'll see the TeamWin IdeaPhone load screen-and boot into TWRP.
Congrats, you've installed the recovery. Now you can install custom ROMs on your phone and backup your phone's kernels as protection against troubles. Enjoy! :highfive:
How to deodex your phone's ROM
Sadly, you cannot do this using your phone. You'll need a Windows PC for this process, a good Internet connection as you'll have to download large files for this process, and plenty of time.
Here's a good XDA Developers Tutorial on how to deodex your rom, complete with step-by-step explanation and screenshots: http://forum.xda-developers.com/showthread.php?t=2374008
There you go. If you followed my tutorial completely, you are now a proud owner of a rooted, recovery-flashed, deodexed MediaTek device/Lenovo A390.
Enjoy!
Please hit Thanks button if my post helped you.

[Q] BenQ B50 Can Root it ?

sorry , My english is poor
The Phone Can Root it?
i won't use 1 key root , because 1 key root APP , too many have virus and Crash APP
my phone is BenQ B50 LTE , 1G ram / 8G rom .
dual sim
dump two IMG Files
Boot.IMG And Recovery.IMG
here:
Recovery
https://mega.co.nz/#!Q8t02Y4R!ZsDU9OqNotu0jETJ3VmscgNeC8wHnFPWEoBu5ygvZck
Boot
https://mega.co.nz/#!U01TGbbC!Z14cU91HyGNRpKQ53x6mDiXx2Rq8q7zqKfCKujp8ON8
Two Image
if need dump more IMG , i'll upload files

Use iRoot/VRoot then change to SuperSU . No virus if use Vroot except it install a china app store but after downloading SuperSU it will uninstall the Vroot Superuser and also the china app store. We use this with 98% success rate on phones in Asia.

cracktech said:
Use iRoot/VRoot then change to SuperSU . No virus if use Vroot except it install a china app store but after downloading SuperSU it will uninstall the Vroot Superuser and also the china app store. We use this with 98% success rate on phones in Asia.
Click to expand...
Click to collapse
Thanks,
I Use VRoot , can root it
but supersu binary out of date in other SuperUser App
else only Default VRoot SuperUser APP ?

Can u confirm this is your model? http://www.benq.com.tw/product/smartphones/b50/specifications/ . If it is MTK SoC it is very easy for me to help you.
First -Dont worry about the "su" binary needs to be updated. YOu do this first 1- install Mobile UncleTools (from Playstore) 2. download the CWM recovery (from the link I give you and copy to sdcard , 3- Select "Update recovery from MobileUncleTool - search for the CWM Recovery and answer "yes". 4- Check recovery has been installed (Vol+/Vol- plus Power button OR from within MobileUncleTool you can select "reboot into recovery") 5. Download and copy "ROOT_MTK.zip" to sdcard and from CWM select "install" . F I N I S H!!
Your phone is now rooted with SuperSU 2.46 plus busybox and no future problems with "su" binary update.
Please go to this link to select all the files necessary to do this : CWM recovery/ ROOT_MTK/ : :removed link

cracktech said:
First -Dont worry about the "su" binary needs to be updated. YOu do this first 1- install Mobile UncleTools (from Playstore) 2. download the CWM recovery (from the link I give you and copy to sdcard , 3- Select "Update recovery from MobileUncleTool - search for the CWM Recovery and answer "yes". 4- Check recovery has been installed (Vol+/Vol- plus Power button OR from within MobileUncleTool you can select "reboot into recovery") 5. Download and copy "ROOT_MTK.zip" to sdcard and from CWM select "install" . F I N I S H!!
Your phone is now rooted with SuperSU 2.46 plus busybox and no future problems with "su" binary update.
Please go to this link to select all the files necessary to do this : CWM recovery/ ROOT_MTK/ :
Click to expand...
Click to collapse
Yes , My Phone is model.
First , Very Thank You To Help me
Because of My phone was returned for repair.
The main reason for failure camera options
I am waiting for the phone to come back
I will do it
Very thanks you , Again .

cracktech said:
Can u confirm this is your model? ]
Click to expand...
Click to collapse
My phone has return
I Try it. it can Root ,thank you!
I use MTK_ROOT.zip File , But this File was install some app ?

Yes MTK_ROOt installs additional apps for MTK users only!
jackyui said:
My phone has return
I Try it. it can Root ,thank you!
I use MTK_ROOT.zip File , But this File was install some app ?
Click to expand...
Click to collapse
Yes it does but not SPYWARES! NTPSync is for you to get very fast GPS satellites lock (please add the 2 digit "XX.pool.ntp.org" XX= your current country e.g. "cn" =China , "tw"=Taiwan, "de"=Germany. MTK Suite is for you to do backup of IMEI process and Download of "ETO.db" also for GPS. just press download "eto" only 3-4 seconds and then "install" . "QuickExit" is for you to use when an app is frozen and you cannot exit the app , just swipe down from top task bar tap on QuicExit. It will exit the app.
If you dont want them since you have already "Rooted" you can "uninstall" them by using any "root uninstaller". Goodbye.

cracktech said:
Yes it does but not SPYWARES! NTPSync is for you to get very fast GPS satellites lock (please add the 2 digit "XX.pool.ntp.org" XX= your current country e.g. "cn" =China , "tw"=Taiwan, "de"=Germany. MTK Suite is for you to do backup of IMEI process and Download of "ETO.db" also for GPS. just press download "eto" only 3-4 seconds and then "install" . "QuickExit" is for you to use when an app is frozen and you cannot exit the app , just swipe down from top task bar tap on QuicExit. It will exit the app.
If you dont want them since you have already "Rooted" you can "uninstall" them by using any "root uninstaller". Goodbye.
Click to expand...
Click to collapse
BenQ B50 , Never backup ROM And Reboot Option Select "Yes" in CWM
Because it will only front camera lens :crying:

[ROOT GUIDE] Root Kyocera Duraforce (E6560C) with KingRoot and Replace with SuperSU

Here is a root guide for Kyocera DuraForce (E6560C). This has been confirmed to work with Bell Mobility device but should work for all providers.
Follow this guide at your own risk, I am not liable for any damages or lost data caused by following this guide.
The guide is a result of rooting and un-rooting my device several times, and the first time was the easiest. I've included workarounds for all of the issues that I've encountered but if you are rooting from stock it should be quick and simple and shouldn't require clearing app data or reinstalling KingRoot.
1. Enable "Install from unknown sources" in your device Settings/Security menu.
2. Uninstall any security/virus scanners you may have installed on your device as they may conflict with the rooting process
2. Download and install KingRoot from kingroot.net
3. Run KingRoot and tap through the introductory screens
4. Tap "TRY TO ROOT" button
5. Wait for root process to complete. It usually takes 1-2 minutes to root a stock device
6. Enjoy your rooted device!
To replace KingRoot with SuperSU (recommended for compatibility with other root apps):
1. Root device with KingRoot as detailed above
2. Purchase/install Super-Sume Pro available on Google Play. (There are other manual options for replacing KingRoot with SuperSU in this forum. I will post links to those threads when I get time)
3. Start Super-Sume Pro and tap the big blue button
4. The device will freeze while Super-Sume Pro attempts to get SU access. This is normal. Tap the home button until it un-freezes and the home screen is displayed.
5. Wait for a popup requesting super user access for Super-Sume Pro. If no popup appears after waiting 1 minute then open KingRoot and tap "Root Authorizations". Look for Super-Sume Pro and change the permissions from "Prompt" to "Allow"
6. [OPTIONAL] If you are having issues with Super-Sume Pro or just want to be thorough, then go to device Settings/Apps, find Super-Sume Pro and tap "Clear data"
7. Open Super-Sume Pro and tap the big blue button again. This time it should succeed with stage 1. Tap the big blue button again and wait for it to complete.
8. SuperSU should open automatically. If it doesn't please look for it and open it manually. If SuperSU is not installed at this point (it sometimes happens), then goto step A. If SuperSU IS installed then continue to step 9.
9. Load SuperSU and allow it to install the SU binary
10. Reboot the device
11. If any icons remain for KingRoot or Purify you should now be able to delete them to complete the process.
A.1. Reinstall KingRoot
A.2. Clear data for Super-Sume Pro (refer to step 6)
A.3. Open KingRoot and change permissions for Super-Sume Pro to "Allow" (refer to step 5).
A.4. Goto step 7
***** If the Super Sume Pro freezes for more than 2 minutes simply hold the power button until the device resets. Continue with step A.2.
That completes this rooting guide. Please let me know if you have any issues. Enjoy your rooted device!

I was wondering if u also installed a custom recovery? Is there away to change it from stock?

sargon__ said:
Here is a root guide for Kyocera DuraForce (E6560C). This has been confirmed to work with Bell Mobility device but should work for all providers.
Follow this guide at your own risk, I am not liable for any damages or lost data caused by following this guide.
The guide is a result of rooting and un-rooting my device several times, and the first time was the easiest. I've included workarounds for all of the issues that I've encountered but if you are rooting from stock it should be quick and simple and shouldn't require clearing app data or reinstalling KingRoot.
1. Enable "Install from unknown sources" in your device Settings/Security menu.
2. Uninstall any security/virus scanners you may have installed on your device as they may conflict with the rooting process
2. Download and install KingRoot from kingroot.net
3. Run KingRoot and tap through the introductory screens
4. Tap "TRY TO ROOT" button
5. Wait for root process to complete. It usually takes 1-2 minutes to root a stock device
6. Enjoy your rooted device!
To replace KingRoot with SuperSU (recommended for compatibility with other root apps):
1. Root device with KingRoot as detailed above
2. Purchase/install Super-Sume Pro available on Google Play. (There are other manual options for replacing KingRoot with SuperSU in this forum. I will post links to those threads when I get time)
3. Start Super-Sume Pro and tap the big blue button
4. The device will freeze while Super-Sume Pro attempts to get SU access. This is normal. Tap the home button until it un-freezes and the home screen is displayed.
5. Wait for a popup requesting super user access for Super-Sume Pro. If no popup appears after waiting 1 minute then open KingRoot and tap "Root Authorizations". Look for Super-Sume Pro and change the permissions from "Prompt" to "Allow"
6. [OPTIONAL] If you are having issues with Super-Sume Pro or just want to be thorough, then go to device Settings/Apps, find Super-Sume Pro and tap "Clear data"
7. Open Super-Sume Pro and tap the big blue button again. This time it should succeed with stage 1. Tap the big blue button again and wait for it to complete.
8. SuperSU should open automatically. If it doesn't please look for it and open it manually. If SuperSU is not installed at this point (it sometimes happens), then goto step A. If SuperSU IS installed then continue to step 9.
9. Load SuperSU and allow it to install the SU binary
10. Reboot the device
11. If any icons remain for KingRoot or Purify you should now be able to delete them to complete the process.
A.1. Reinstall KingRoot
A.2. Clear data for Super-Sume Pro (refer to step 6)
A.3. Open KingRoot and change permissions for Super-Sume Pro to "Allow" (refer to step 5).
A.4. Goto step 7
***** If the Super Sume Pro freezes for more than 2 minutes simply hold the power button until the device resets. Continue with step A.2.
That completes this rooting guide. Please let me know if you have any issues. Enjoy your rooted device!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=68367171
Sent from my Andromax AD683J using XDA-Developers mobile app
---------- Post added at 09:09 PM ---------- Previous post was at 09:09 PM ----------
http://forum.xda-developers.com/showthread.php?p=68367171
Sent from my Andromax AD683J using XDA-Developers mobile app
---------- Post added at 09:11 PM ---------- Previous post was at 09:09 PM ----------
ganyong said:
http://forum.xda-developers.com/showthread.php?p=68367171
Sent from my Andromax AD683J using XDA-Developers mobile app
---------- Post added at 09:09 PM ---------- Previous post was at 09:09 PM ----------
http://forum.xda-developers.com/showthread.php?p=68367171
Sent from my Andromax AD683J using XDA-Developers mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3248398
Sent from my Andromax AD683J using XDA-Developers mobile app

This method does not work any more, newest Kingoroot will block SuperSu me pro from even opening, even when kingoroots silent install is disabled
kingoroot also blocks super su binary update so it cant be installed and then remove Kingoroot manually.....waiting for a SuperSu me pro update !!

[GUIDE]Root Bluboo S8 - Systemless Root

Hi There..
Thanks to topjohnwu, Digitalhigh, and Dvdandroid, and all magisk contributors.
This is my first post in XDA, here i found way to root bluboo s8 without unlocking bootloader. meanwhile, Bluboo S8 bootloader cannot be unlocked because volume up cant work as usual on other phones.
Required Downloads :
- Bluboo S8 Rooted Frimware
- SP Flash Tools
You can also install Systemless Xposed from magisk manager, and work perfectly :good:
I create and flash file on Windows 10 before
How to root :
1. Download All Files
2. Install Magisk Manager in your device
3. Open SP Flash Tools and add scatter file to it
4. Click Download as "Download Only" <- This is so very important or you will bricked your phone
5. Connect your phone to pc in turned off state
6. wait until OK
7. Your device will reboot
Now Bluboo S8 is Rooted !
Here is Download Link
[drive.google.com/file/d/0BwTxvei11zKJYzFvWWdmbzhvRTQ/view"[
i cant upload my file in this forum, in download link Just remove [ & "[
or search this in needroom .com
Give me +1 if this helpful

can you make video tutorial of it?! bro.. coz lot of peoples were searching for this.
prydmus said:
Hi There..
Thanks to topjohnwu, Digitalhigh, and Dvdandroid, and all magisk contributors.
This is my first post in XDA, here i found way to root bluboo s8 without unlocking bootloader. meanwhile, Bluboo S8 bootloader cannot be unlocked because volume up cant work as usual on other phones.
Required Downloads :
- Bluboo S8 Rooted Frimware
- SP Flash Tools
You can also install Systemless Xposed from magisk manager, and work perfectly :good:
I create and flash file on Windows 10 before
How to root :
1. Download All Files
2. Install Magisk Manager in your device
3. Open SP Flash Tools and add scatter file to it
4. Click Download as "Download Only" <- This is so very important or you will bricked your phone
5. Connect your phone to pc in turned off state
6. wait until OK
7. Your device will reboot
Now Bluboo S8 is Rooted !
Here is Download Link
[drive.google.com/file/d/0BwTxvei11zKJYzFvWWdmbzhvRTQ/view"[
i cant upload my file in this forum, in download link Just remove [ & "[
or search this in needroom .com
Give me +1 if this helpful
Click to expand...
Click to collapse
can you make video tutorial of it?! bro.. coz lot of peoples were searching for this.

dont work with my phone
When flashing:
BROM ERROR: STAUS_DEVICE_CTRL_EXCEPTION (0XC0050001)

ashyinvader said:
can you make video tutorial of it?! bro.. coz lot of peoples were searching for this.
Click to expand...
Click to collapse
ill make tutorial soon

tovaritx said:
When flashing:
BROM ERROR: STAUS_DEVICE_CTRL_EXCEPTION (0XC0050001)
Click to expand...
Click to collapse
Have you enable usb debug ?
what is your chipset, MT6750/MT6755 ? i found differences chipset for Bluboo S8 in some case. This is for MT6750

prydmus said:
ill make tutorial soon
Click to expand...
Click to collapse
Thank you so much bro .!! Waiting for it eagerly.!! ?

prydmus said:
ill make tutorial soon
Click to expand...
Click to collapse
Only a few screenshoots will be enough...
---------- Post added at 04:44 PM ---------- Previous post was at 04:40 PM ----------
prydmus said:
Have you enable usb debug ?
what is your chipset, MT6750/MT6755 ? i found differences chipset for Bluboo S8 in some case. This is for MT6750
Click to expand...
Click to collapse
CPU MTK6750T Octa-Core 1.5 GHz. This is the vendor page: https://www.banggood.com/Bluboo-S8-...re-4G-Smartphone-p-1177022.html?rmmds=myorder
Yes, I enabled usb debug.
Also install Windows_10_MTK_VCOM_USB_Preloader_Drivers. Without them, the error is the same.

No root needed
Hey guys, I managed to mimic most of the features of Galaxy s8 without rooting bluboo s8..
Check this video.,,
Transform Bluboo s8 to Samsung s8 by "Perfectionist Ashmi" in youtube..
I can't able to post links in this thread...
hope it helps...:good:

ashyinvader, Bluboo dont let change his launcher, so you need to root the terminal.

ok i got it. you have to use windows 7 because windows 10 does not work. and install vcom drivers. how do you install TWRP compatible?

satellitea31 said:
how do you install TWRP compatible?
Click to expand...
Click to collapse
Sorry, I dont know what is TWRP... It is necessary ?
I will probe with win7 today....

Ok, finally rooted.
1.- It is necessary windows 7
2.- Install usb drivers from mtkusballdriver.com. Download last version. Install in win 7.
3.- Download spflashtool from spflashtool.com. Install in win 7.
4.- Download Bluboo S8 Rooted Frimware of user prydmus. See prydmus first post.
4.1- Install Magisk Manager in phone (transfer it via dropbox, for example). See prydmus first post.
5.- Run SP Flash Tool. Select Scatter text file of dir of point 4.
6.- Select "Download only". Must be selected at startup.
7.- Connect the phone. The phone must be powered off before.
7.- Press Download, red bar to 100%, 1 sec, yellow bar to 100%, 2 sec. Ok screen. If error or no notice, the drivers are not installed.
8.- Disconect the phone from USB and powerup.
9.- The phone inform that is rooted. May be date and time will be reset, but in a few seconds will be autoset from internet.
10.- Install from market an app launcher, for example, nova launcher.
11.- Install from the market an app unistaller, for example root unistaller.
12.- Unistall the system app: INITIATOR. In some unistraller app is not showed with this name.
13.- Reboot.
14.- Select your launcher.
Congratulations. Your phone is now FREE.
Thank you to prydmus and satellitea31

tovaritx said:
Ok, finally rooted.
1.- It is necessary windows 7
2.- Install usb drivers from mtkusballdriver.com. Download last version. Install in win 7.
3.- Download spflashtool from spflashtool.com. Install in win 7.
4.- Download Bluboo S8 Rooted Frimware of user prydmus. See prydmus first post.
4.1- Install Magisk Manager in phone (transfer it via dropbox, for example). See prydmus first post.
5.- Run SP Flash Tool. Select Scatter text file of dir of point 4.
6.- Select "Download only". Must be selected at startup.
7.- Connect the phone. The phone must be powered off before.
7.- Press Download, red bar to 100%, 1 sec, yellow bar to 100%, 2 sec. Ok screen. If error or no notice, the drivers are not installed.
8.- Disconect the phone from USB and powerup.
9.- The phone inform that is rooted. May be date and time will be reset, but in a few seconds will be autoset from internet.
10.- Install from market an app launcher, for example, nova launcher.
11.- Install from the market an app unistaller, for example root unistaller.
12.- Unistall the system app: INITIATOR. In some unistraller app is not showed with this name.
13.- Reboot.
14.- Select your launcher.
Congratulations. Your phone is now FREE.
Thank you to prydmus and satellitea31
Click to expand...
Click to collapse
thanks for helping us

satellitea31 said:
ok i got it. you have to use windows 7 because windows 10 does not work. and install vcom drivers. how do you install TWRP compatible?
Click to expand...
Click to collapse
i had porting TWRP from other phone to Bluboo S8. But i have a problem when i booting to recovery, the touchscreen wont work.
but twrp work for flash a flashable zip use flashify.

Why software used to flash the twrp?

@ prydmus,
look here,can you please help us.
maybe you had luck to register
https://4pda.ru/forum/index.php?showtopic=831334&st=2200#entry65694030

I just want to change de screen lock app.
Bluboo delete the config part that allow it, so we must to unistall the bluboo app... but, what is this app?

TWRP Bluboo S8 3.1.1 by Jemmini
bananaci said:
@ prydmus,
look here,can you please help us.
maybe you had luck to register
https://4pda.ru/forum/index.php?showtopic=831334&st=2200#entry65694030
Click to expand...
Click to collapse
Here TWRP from that forum, i not testing this yet..
please give thanks to @jemmini
ftp://109.87.84.155/Bluboo_S8/twrp/recovery.img

please send me this files too.
boot.img (9,73 MB)
and
scatter.zip (2,77 KB)

bananaci said:
please send me this files too.
boot.img (9,73 MB)
and
scatter.zip (2,77 KB)
Click to expand...
Click to collapse
just request directed to TWRP 3.1.1 BlubooS8 developer @jemmini
i cant register to 4pda.ru too