hey would hear about some on who can help me with get 2 way recording to work.
I have flashed for Android 2.3.5 (Gingerbread) - official HTC 3.06.405.1 RUU with HTC Sense 3.0 for HTC Desire HD but can not get it to work please help:-D
target5 said:
hey would hear about some on who can help me with get 2 way recording to work.
I have flashed for Android 2.3.5 (Gingerbread) - official HTC 3.06.405.1 RUU with HTC Sense 3.0 for HTC Desire HD but can not get it to work please help:-D
Click to expand...
Click to collapse
2 way call doesn't work on stock. Have to run a custom kernel for it work
target5 said:
hey would hear about some on who can help me with get 2 way recording to work.
I have flashed for Android 2.3.5 (Gingerbread) - official HTC 3.06.405.1 RUU with HTC Sense 3.0 for HTC Desire HD but can not get it to work please help:-D
Click to expand...
Click to collapse
This KERNEL from m-deejay will help u
how
hi again howe do i flash the kernel only ... just new in this my first flash so pleas help med
why
Included kernel details:
New kernel: 2.6.35.14 (under-volted & tweaked)
CPU up to 1.61 GHz (1.15 GHz by default) - controlled automatically by built it O/C Daemon. How to use O/C Daemon?
If you want to control CPU manually, you would need SetCPU from here: SetCPU
In SetCPU remember to check "Set on Boot", but using O/C Daemon gives much better performance and battery life
Many CPU governors (SmartAss, Ondemand, Performance, Conservative, UserSpace)
GPU+ patch (Improved 2D & 3D Graphics performance - Thanks to -snq)
V(R) I/O as default scheduler
SLQB Memory Management
CIFS, TUN & UTF8 support
LZMA compression
Wi-Fi module improved drivers
2-way recording patch ( why is this there ????????? is it not working )
Possibility to change VDD levels dynamically - check question 21 in FAQ
Code cleaned up with custom voltages, tweaks & many more!
You can find custom kernels here
Since your on stock, you need root access ti install 2wrec. Root it first with ace advance kit...
Then install custom rom with 2wrec kernel.
The question marks are there as the app that does the recording is suspected to cause battery drain. Also becareful once you get the app as in someplaces of the world if you so not tell them you are recording them not only can you be sued but could face stiffer penaltys
target5 said:
Included kernel details:
New kernel: 2.6.35.14 (under-volted & tweaked)
CPU up to 1.61 GHz (1.15 GHz by default) - controlled automatically by built it O/C Daemon. How to use O/C Daemon?
If you want to control CPU manually, you would need SetCPU from here: SetCPU
In SetCPU remember to check "Set on Boot", but using O/C Daemon gives much better performance and battery life
Many CPU governors (SmartAss, Ondemand, Performance, Conservative, UserSpace)
GPU+ patch (Improved 2D & 3D Graphics performance - Thanks to -snq)
V(R) I/O as default scheduler
SLQB Memory Management
CIFS, TUN & UTF8 support
LZMA compression
Wi-Fi module improved drivers
2-way recording patch ( why is this there ????????? is it not working )
Possibility to change VDD levels dynamically - check question 21 in FAQ
Code cleaned up with custom voltages, tweaks & many more!
You can find custom kernels here
Click to expand...
Click to collapse
If you refered to the same kernel i told u, one of a users i know is also using it & is very happy with overall performance including 2wcr..
Hello,
Is there a software which can overclock the cpu and gpu of Nokia X and is it necessary to wait for a modified kernel in order such software to be able to work?
Regards
Solo
solo2002 said:
Hello,
Is there a software which can overclock the cpu and gpu of Nokia X and is it necessary to wait for a modified kernel in order such software to be able to work?
Regards
Solo
Click to expand...
Click to collapse
The NULL Kernel already allows for overclocking. Check the Android Development Section and read the NULL Kernel thread. I believe its overclocked.
Dom3616 said:
The NULL Kernel already allows for overclocking. Check the Android Development Section and read the NULL Kernel thread. I believe its overclocked.
Click to expand...
Click to collapse
Thank you for the fast reply. I checked the thread. It seems they managed to overclock the gpu but there is no option for cpu. I guess I will need to wait and hope someone to be able to implement cpu overclocking.
I tried a few apps (SetCPU, Titanium Tweaker, KUI), but none of them overclocked my CPU. Using 3.4.86 kernel that comes with dhacker's 29 AOSP ROM.
Note: This kernel will work on stock firmware2.20.40.184, 2.20.40.183, 2.20.40.178, 2.20.174, 2.20.40.168, 2.20.40.165, 2.20.40.164 and may be lower, also working on some stock-based ROMs(EchoeROM V3,for example).
Disclaimer: I am not responsible for your broken phone , broken memory card, etc. All my kernels I test first on my own phones , and then upload here
If you like my works please do not forget donate to me(PayPal account you may find in my profile)
Bootloader unlock is required for every custom rom, custom kernel, custom recovery. Unlock Tool here:http://forum.xda-developers.com/zenfone2/general/tool-one-click-bootloader-unlock-root-t3155884
Changelog:
03.06.2016
Full NTFS support for SD card
NTFS OTG full support by sibling Asus File Manager(read/write), from others file managers you can to see OTG NTFS devices, may see OTG NTFS devices from file chooser but you can't edit data. But you can edit platform.xml via NextAPP SDfix and can write on NTFS OTG devices
14.05.2016
Migration to newest source code from Zenfone Zoom ZX551ML from 20 april 2016
Ramdisk from 183 firmware
Some optimization in code
17.04.2016
Full support exFAT SDcard format, now you may write/delete/rename by standart method of Android 5
16.04.2016
Great game performance
Remove Hotplug driver
Remove -Ofast optimization(loud words-not take effects, placebo)
Remove optimization flag -march=silvermont(loud words, did not work on 3.10 kernels)
Remove touchboost from Interactive governor
Modified Interactive, Interactive Pro, Intel, Cyan governors: CPU2 and CPU3 turn off when screen off
Idle from Linux kernel 4.6
Gpu governor simple_ondemand from Linux kernel 4.6
Based on source code from Zenfone Zoom ZX551 from march 17
zram and kernel compression is LZ4
04.03.2016
Rework MSM Hotplug, now only CPU0+CPU1 online, no dancing CPUs.
For humor and proof that overclock in others kernels is fake added "overclock" to 5GHz
28.02.2016
Re-work MSM Hotplug. Now if load more than 79 but lower than 99- only another 1 core go to online(CPU2 or CPU3)) and processor working on 3 cores online, if load more than 99- CPU3 and CPU2 go to online together and processor working on all 4 cores online DO NOT set fast lane 99 and higher!!!
Made 12 thermal states for video adapter a place of 3. If on 457 MHz have overheating- freq go to 400 MHz, if overheating on 400- go to 355, if hot on 355-go to 320 MHz and so on. In stock kernel if overheating on 457 MHz- processor goes in 200 MHz and was lags in games
25.02.2016
Compile with new march=silvermont optimizationmarch=silvermont(thanks to @Dan_Jacques )
Tuning MSM hotplug for Zenfone 2: now interface faster, smoother even when min cpus online = 2. And maybe drain battery less.
Unlocked almost all hidden GPU frequencies. Now available gpu frequencies 106, 133,160,177 MHz(I think this NOT fake underclock). I made Kernel Auditor version for our GPU PowerVR 6430 (see screnshots here http://i10.pixs.ru/storage/5/8/1/Bezimyanni_7545670_20843581.png ) https://drive.google.com/file/d/0BxVRXQGBg4DTaThjQUtoRFBrdms/view?usp=sharing
21.02.2016
Based on Asus Zenfone Zoom source code
Fixed hotplug driver and tuning(Now drain battery much less and fixed charging: now no overheating)
Added Cyan governor
Changed Interactive governor to Interactive from Asus Zenfone Zoom
18.02.2016
Now 2 different versions: for ZE551ML and for ZE550ML, Tuning MSM Hotplug(2 cores always online, Fast Lane up to 150), added Interactive Pro governor and set by default
04.02.2016
Interactive governor by default, realtime Hotplugging now on any governors, on Interactive too(Extra CPU cores disabled without load) Idea and work @mrg666 . You may to set parameters of hotplug driver via Kernel Auditor, point "CPU Hotplug"
Remove Hotplug governor(no longer needed)
Kernel Features:
1.Based on Zenfone Zoom ZX551ML source
2. Add zram support in LZ4 format(no need to turn on it, if no problem with multitasking and never no need to turn on for devices with 4GB RAM), kernel compression LZ4 too
3. Adaptation InteractiveX V2 governor for quad core devices, I make that 2 cores go to offline, when screen off
4. Processor work in "1 cpu per module" mode a place of "2 cores per module"(4 independent cpus, not pair)
5. Ofast and march=silvermont(thanks @Dan_Jacques optimization with GCC 4.9
6. Init.d support. You should install BusyBox in /xbin folder/
7. SELinux Permissive
8. KVM support (Kernel Virtual machine for Intel)
9. Added SWAP support
10. USB-HID mouse & keyboard functions(required USB Keyboard app from GPhttps://play.google.com/store/apps/details?id=remote.hid.keyboard.client&hl=en)
11. Ultra kernel samepage merging(UKSM) a place of KSM. Disabled by default, if you want you may turn on it via Kernel auditor
12. Full auto brightness. I removed minimal level 15, now level 5
13. More governovs and I/O schedulers
14.Zram disabled
15. More TCP algorithms, Westwood by default
16. Unlocked GPU frequencies 106, 133, 160, 177 MHz
17. NTFS support for SD card and OTG
Deprecated features:
1.Hotplug governor by default. Extra CPU cores disabled without load(it have been removed sinse 04/02/2016)
2. For correct work on ZE550ML you should change DPI to 320, for example via init.d script(root required).
1). Before flash kernel, you should install BusyBox in xbin folder, then create init.d folder in system/etc and set 755 permissions on it.
2) Download dpi320.zip, then extract dpi320 file and put it in system/etc/init.d folder, check that on it set 755 permissions
https://yadi.sk/d/6hg6bDDioCNbT
3). You may flash kernel.
3. Interactive governor from Asus ZenPad S 8.0 by default with some tuning(for example, hi_speed freq = 1583 MHz) and hotplugging additions( 2 cores go to offline, when screen off) Idea and work by @TheSSJ
4. Realtime hotplugging for all governors. You may to set parameters of hotplug driver via Kernel Auditor, point "CPU Hotplug"
5. Interactive governor from Asus Zenfone Zoom by default with some tuning(for example, hi_speed freq = 1750 MHz), InteractiveX and Interactive Pro have hispeed_freq 1750 MHz too.
Step 1:
You should download files for flashing:
ADB v1.0.32: Download from Google Drive
IMG file with kernel:
03.02.2016 https://yadi.sk/d/FuJhWqc9oCLZy
04.02.2016 https://yadi.sk/d/PcDiDaumoJMb7
All versions from 18.02.2016 and higher will be here: https://drive.google.com/folderview?id=0BxVRXQGBg4DTSVV5Q19mSVUxQk0&usp=sharing
Step2:
You should reboot your phone in the droidboot mode. (turn off you gadget then press Turn off button and volume + button)
Then go to the ADB folder and hold Shift + Right Mouse button and write this command:
Code:
fastboot flash boot bootXX.XX.img
,where XX.XX- numbers after word "boot"
Step3:
Reboot to Android.
Method 2( via TWRP, without PC)1. Download bootXX.XX.img
2. Go to recovery mode
3. Click Install, choose this bootXX.XX.img, choose boot partition and flash
4. Then reboot
Method 3(via Terminal Emulator, without PC)(root required)1. Download bootXX.XX.img and put it in root of internal memory
2. in command prompt write
Code:
su
dd if=/sdcard/bootXX.XX.img of=/dev/block/by-name/boot
reboot
And device started with custom boot.img
XDA:DevDB Information
Custom Lolipop Kernel for Asus Zenfone 2 ZE551ML/ZE550ML, Kernel for the Asus ZenFone 2
Contributors
BORETS24
Source Code: https://github.com/BORETS24/Kernel-for-Asus-Zenfone-2.git
Kernel Special Features:
Version Information
Status: Testing
Created 2016-02-02
Last Updated 2016-09-03
Nice work, especially the Hotplug features (maybe you should transfer your post under http://forum.xda-developers.com/zenfone2/development ?)
nazagan said:
maybe you should transfer your post under http://forum.xda-developers.com/zenfone2/development ?)
Click to expand...
Click to collapse
Maybe... How I can to do this?
Can you add flashable zip please? thank you.
serhangelgor said:
Can you add flashable zip please? thank you.
Click to expand...
Click to collapse
Why?
Method 2(through CWM/TWRP, without PC)
1. Download bootXX.XX.img
2. Go to recovery mode
3. Click Install, choose this bootXX.XX.img, choose boot partition
4. Then reboot
Or you can flash without PC and without custom revovery
Method 3(through Terminal Emulator, without PC)(root required)
1. Download bootXX.XX.img and put it in root of internal memory
2. in command prompt write
Code:
su
dd if=/sdcard/bootXX.XX.img of=/dev/block/by-name/boot
reboot
And device started with custom boot.img
BORETS24 said:
Why?
Method 2(through CWM/TWRP, without PC)
1. Download bootXX.XX.img
2. Go to recovery mode
3. Click Install, choose this bootXX.XX.img, choose boot partition
4. Then reboot
Or you can flash without PC and without custom revovery
Method 3(through Terminal Emulator, without PC)(root required)
1. Download bootXX.XX.img and put it in root of internal memory
2. in command prompt write
Code:
su
dd if=/sdcard/bootXX.XX.img of=/dev/block/by-name/boot
reboot
And device started with custom boot.img
Click to expand...
Click to collapse
hey bro, if you don't mind can I add up a few things for you?? it will reduce your work and since you are on kernel 3.10.20 you can try to use my direct jump patch to jump to kernel.org v3.10.94 here's the link https://github.com/Zenfone2-Dev/direct-kernel-patch
and nice work.
installed and opened only 1 core, its too good and battery life is amazing, thanks so much for this amazing work, can you add underclock feature? it will give more batterry life
serhangelgor said:
can you add underclock feature? it will give more batterry life
Click to expand...
Click to collapse
No, I don't want to add fake underclock. It give more interface freeze and nothing else besides placebo effect and boastfulness. I started to make kernel for zenfone 2 in july 2015 and using "underclock" some time- no different battery life between 500 and 250 MHz, I tried and 166 MHz and even 83 MHz- no effect besides slow and freeze interface.
say99 said:
hey bro, if you don't mind can I add up a few things for you?? it will reduce your work and since you are on kernel 3.10.20 you can try to use my direct jump patch to jump to kernel.org v3.10.94 here's the link https://github.com/Zenfone2-Dev/direct-kernel-patch
and nice work.
Click to expand...
Click to collapse
Thank you very much, may be apply this patch in future.
BORETS24 said:
Thank you very much, may be apply this patch in future.
Click to expand...
Click to collapse
made a pull request keep working and if you want you can switch to gcc 5.3.0 toolchain https://github.com/Zenfone2-Dev/x86_64-toolchain-GCC-5.3.0
BORETS24 said:
No, I don't want to add fake underclock. It give more interface freeze and nothing else besides placebo effect and boastfulness. I started to make kernel for zenfone 2 in july 2015 and using "underclock" some time- no different battery life between 500 and 250 MHz, I tried and 166 MHz and even 83 MHz- no effect besides slow and freeze interface.
Click to expand...
Click to collapse
BORETS24, can you add F2FS support? I feel the IO more smooth with it (in other phones there is a huge difference between ext4 and f2fs, like Moto G), but requires changes in kernel config file (easy) and a modified ramdisk with edited fstab (more complicated). There is an Project T version that includes a fstab with the needes changes [link=http://forum.xda-developers.com/zenfone2/development/project-t-custom-kernel-zenfone-2-t3150822/post64366155]here[/link] (but only boot with all /system /data / cache formatted in F2FS). With the correct lines, it's possible to make a mixed fstab, and supports both fs.
Changelog:
04.02.2016
Interactive governor by default, realtime Hotplugging now on any governors, on Interactive too(Extra CPU cores disabled without load), remove Hotplug governor(no longer needed)
BORETS24 said:
Changelog:
04.02.2016
Interactive governor by default, realtime Hotplugging now on any governors, on Interactive too(Extra CPU cores disabled without load), remove Hotplug governor(no longer needed)
Click to expand...
Click to collapse
hey bro, I can't find the commit for realtime hotplugging
Sent from my ASUS_Z00A using Tapatalk
Im using it, looks good, thanks
say99 said:
hey bro, I can't find the commit for realtime hotplugging
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
If will no critical bugs I will upload to Github, need time for test by users.
BORETS24 said:
If will no critical bugs I will upload to Github, need time for test by users.
Click to expand...
Click to collapse
just an advice : always upload up the commits and make two builds, test builds and stable builds, you can always revert the things you pushed to git
Sent from my ASUS_Z00A using Tapatalk
say99 said:
just an advice : always upload up the commits and make two builds, test builds and stable builds, you can always revert the things you pushed to git
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
I'm just recently start to use Github, for me easier delete changes from sources on PC Ubuntu than from github before changes,I keep stable source in zip archieves, old school And I can't to know which version of boot.img is stable which is not. Will make two unstable build? Alone I can't test everything, all hope on users. If you don't want to wait, I may to say that use Autosmp hotplug driver...
BORETS24 said:
I'm just recently start to use Github, for me easier delete changes from sources on PC Ubuntu than from github before changes,I keep stable source in zip archieves, old school And I can't to know which version of boot.img is stable which is not. Will make two unstable build? Alone I can't test everything, all hope on users. If you don't want to wait, I may to say that use Autosmp hotplug driver...
Click to expand...
Click to collapse
haha I can understand maybe that's y I added up the build script. A single command and you get a flashable zip without any need to manage them and that command is ./buildzf2
and yeah I have changed the defconfig in script and made a pull request so just get a hold on that
Sent from my ASUS_Z00A using Tapatalk
Add to description of kernel:
You may to set parameters of hotplug driver via Kernel Auditor, point "CPU Hotplug"
I really love your works. You made a big update for this cpu. Can you make a undervolt for this kernel, master ?
I want to create a thread about settings for every custom kernels on our S3 NEO with Lollipop Stock and CM11, CM12, stock 4.4.2 and 4.4.4 ROM.
If You are advanced or expert in the subject of krenels, parameters and features put to this thread Your settings.
This thread, I thnik, helps novice in search for the best settings to be the rom fast, stable and smooth.
So, please placing here and debate on settings the kernels.
Maybe for a CM11, CM12, CM12.1, CM13, stock 4.4.2 and 4.4.4 also 5.0.1 this settings works well, too.
Try and tell us
The Poll is only for stock TW 5.1.1 ROMs.
Thanks for Devs who made the kernels for S3 NEO:
- @sev3n1985
- @Renix63
- @LGaljo
- @nikita36078
- @oranaise2412
- if I forgot about someone - tell me.
Thanks to @gsstudios for giude about governors and I/O shedulers.
Thanks to Mike Barrett for video about Kernel Adiutor settings.
DELETED
Important - only for custom kernels
The phone must be rooted.
1. Before flash any new kernel do backup your rom, boot, recovery, preload and data ex. via recovery.
2. After flash the new kernel always do wipe cache and dalvik cache in recovery and next restart the phone. (restarts takes about 5min)
3. CPU frequencis and governours are important things in rom's speed.
4. CPU freq at 1593MHz may destabilized your phone - heating problem and sometimes random reboots.
5. If You want to OC CPU - have to turn off MPDecision Hotplug and select another one or nothing (MPD may do CPU freq not stable - is always good for only stock frequencis so from (192) 300 to 1401MHz).
6. Sometimes the new kernels have to root again via flash superSU update via recovery ex. like eMotion kernel.
7. Try any changes - don't be afraid - kernel not bite If so go wrong - always have backup
Good luck.
If anyone have another advices - feel free....
The difference between kernels with zRam and zSwap options:
- zRam is a kernel with virtual memory in Internal Memory your phone (compressed) for most users
- zSwap is a kernel for the SD card with swap partition for our phone ex. 512 or 1024 Mb, so if You have not swap partition in Your SD card - do not flash this kernel (no good resoults).
Heating and random reboots problem
This dependent of frequensic CPU and if is it so CPU max freq probably is set at 1593MHz.
If we to much OC our CPU's then our phones may have some lags and freezes or reboots (after call or in camera app).
So if you have this symptoms then you have to set CPU OC max to 1401MHz or 1497MHz.
If it no helps so maybe the kernel is wrong compiled with bad linux settings - and only change the kernel for another one.
Guide for CPU governors and I/O shedulers and others settings in Kernel Adiutor
Please read THIS - big thanks to @gsstudios for this gov guide.
Please watch THIS - thx to Mike Barrett for video about settings in Kernel Adiutor.
It's a good guides for everyone.
Only my conclusions
From my experience with OC CPU and use different kernels (in stock and CM series ROMs) the stable max freq CPU is at 1497MHz.
If You want better battery life select max CPU at 1401MHz or even 1300MHz - 1190MHz.
For better battery life You can try :
- Multicore Power Saving - ON
- CPU gov at Ondemand, Intelidemand, arteractive, inteliactive (without frequent lags)
- GPU gov set at conservative (in new Renix kernel) or msm-adreno-tz
- if you only listen to music then set Max Cores Screen Off at 1 CPU and max freq at 600 - 700 MHz - for media player is enaugh.
- Power Suspend Mode at LCD Panel or Hybrid.
My steps for install all things like rom, fixes, xposed, kernels, ect. :
1. Wipe system, data, cache and dalvik cache - no restart the phone
2. Flash any ROM - no restart the phone
3. Wipe cache and dalvik cache then restart the phone
4. Flash possibly another kernel ex. Renix's, eMotion's... I do it in this step 'couse sometimes after that We have to install ex. camera fix - again in Renix kernel or superSU in eMotion kernel
5. Flash any fix for the point ROM (like RIL, key fix, mixer fix, camera fix... others) then restart the phone
6. Flash superSU (if the rom has not rooted) and possibly busybox for advanced (change build.prop in Kernel Adiutor for example) then restart the phone next go into superSU ( the app install binary) next do settings and out - the same with busybox (have to install libs)
7. Install the xposed app next go to the recovery and flash xposed sdk22(Lollipop) (23 for MM) ex. v85 by wanam, next wipe cache and dalvik cache and restart the phone
8. That's all - in my phone works good, I did and do it by 2-3 years and no problem.
Remember - after wipe cache and dalvik cache the phone's booting time will take a 5-7min.
Thanks for this thread! ^-^
I think I'll post my stats too! I got a perfect balanced mix with 3.5 renix. But for now I wanted to try the new one with boeffla kernel sources ^-^
DELETED
DELETED
Nalas Thank you for the effort..Random restart problem issue ?.. Sory my english is poor
DELETED
nalas said:
Hello.
If you set CPU at 1497MHz or lower so no random reboots in I9301I.
I don't know how it look in I9300I.
So if someone can write abaut it so will be nice....
Click to expand...
Click to collapse
My device I9301Q..I try report the results
do you use xposed,grenify,powernap ?
DELETED
Make the explanations about kernel adiutor options plz. Ty
DELETED
Nalas no random reboots no lags and very very smoth my device thank you bro .
DELETED
DELETED
nalas said:
I'm happy to helped You bro.
What configaration You have ? at 1497MHz (pics) or 1305MHz (video) ? and what's kernel ?
It will be clarity for others.
If You can - edit Your post about above.. ? thx man.
Nice if it works in another phone
Greets
Click to expand...
Click to collapse
Device : I9301Q
Rom : Motion Rom 17.0
Kernel : Renix 3.7 zram
App : Kernel Adiutor Mod v9
Governor : Smartmax Maks 1305 Mhz,Multi core power saver disable wake up boost and hotplug boost disable
Hotplug : Msm hotplug not use Lazy hotplug
Gpu : Conservative and disable simple gpu,Adreno idler
Battery : Fast usb charge enable
I/o : İnternal fiops and 256 kb..External tripndroid 2048 kb
Ksm : Enable
Virtual Memory : Enable, Zram 100 mb
İnit d : Enable 99zram
Not use greenify,powernap..Damaging the system..Continuously restarts system
I have a I9301I and use Motion ROM 17.0 with eMotion kernel. Motion ROM 'as is' gave me frequent random reboots, so I tried Renix63 kernel. V2.0 fixed the random reboots, but LED lights stopped working. Later versions fixed this but introduced the problem of the phone freezing when responding to notifications and occasionally switched off the phone completely. I then tried eMotion ROM from sev3n1985. LEDs work, no random reboots, no freezes, no switch offs. It just works. nalas's second post in this thread has 20 screenshots of recommended tweaks to the Renix63 kernel. I prefer something that works out of the box.
nalas said:
4. CPU freq at 1593MHz may desabilized your phone - heating problem and sometimes random reboots.
5. If You want to OC CPU - have to turn off MPDecision Hotplug and select another one or nothing (MPD may do CPU freq not stable - is always good for only stock frequencis so from 300 to 1401MHz).
Heating and random reboots problem
This dependent of frequensic CPU and if is it so CPU max freq probably is set at 1593MHz.
If we to much OC our CPU's then our phones may have some lags and freezes or reboots (after call or in camera app).
So if you have this symptoms then you have to set CPU OC max to 1401MHz or 1497MHz.
From my experience with OC CPU and use different kernels (in stock and CM series ROMs) the stable max freq CPU is at 1497MHz.
If You want better battery life select max CPU at 1401MHz or even 1300MHz - 1344MHz.
Click to expand...
Click to collapse
With all due respect to nalas and Renix63 I don't understand the logic of producing a kernel that's overclocked to 1593MHz which then has to be reduced to 1401/1497 via Kernel Adiutor in order to prevent freezes or reboots.
Other users have had different experiences, so there there may be other factors to consider - variances in hardware, apps etc. - this is just my experience.
Apart from that - huge props to the devs here. If it were not for them I'd still be running TW 4.4.2.
Corbynista
DELETED
DELETED
I tested Ciro's rom but It was buggy for me (dialer does not appear but the phone call was running)
WiFi not working
SIM not working
I will try Motion Rom.
Cheers
Present, I'm use Spectrum tweak and ROSS-GCC-Neutrino-Phantasm kernel from santoshhh000 (pling). I set cpu scaling by termux/ terminal/ Root explorer and then this value recover to original. I change init.xiaomi_parts.rc from Spectrum tweak zip flash twrp ( change owner + permission + set value with https://github.com/xiaomi-msm8998/XiaomiCustom/blob/master/rootdir/etc/init.spectrum.rc) although value changed in cpu but cpu frequency above value, which I have set before. Anyway to set scaling_max_freq?
nam101101 said:
Present, I'm use Spectrum tweak and ROSS-GCC-Neutrino-Phantasm kernel from santoshhh000 (pling). I set cpu scaling by termux/ terminal/ Root explorer and then this value recover to original. I change init.xiaomi_parts.rc from Spectrum tweak zip flash twrp ( change owner + permission + set value with https://github.com/xiaomi-msm8998/XiaomiCustom/blob/master/rootdir/etc/init.spectrum.rc) although value changed in cpu but cpu frequency above value, which I have set before. Anyway to set scaling_max_freq?
Click to expand...
Click to collapse
I dont understand all you said. You mean you want to lock min max CPU freq right? Join Neutrino group or find in Pling and check Magisk Zyc turbo. And Neutrino kernel is made by ZyCromerZ, not Santoshhhh.
Kirasu2080 said:
I dont understand all you said. You mean you want to lock min max CPU freq right? Join Neutrino group or find in Pling and check Magisk Zyc turbo. And Neutrino kernel is made by ZyCromerZ, not Santoshhhh.
Click to expand...
Click to collapse
Where neutrino group? Yep, i want to clock min max CPU freq. I'm not sure any file recover this value to original or I haven't set owner and permission correctly.
nam101101 said:
Where neutrino group? Yep, i want to clock min max CPU freq. I'm not sure any file recover this value to original or I haven't set owner and permission correctly.
Click to expand...
Click to collapse
You can find Telegram about it. But that group had an accident, and create again.
P/S:
- Sorry Mod about that. I will send in Private next time.
- Some group they didn't exist in XDA and hard to find. That's why I sent link for them. Usually i just let them find themself if they care about it.