Related
I am new with rooting my phone. I have used Rooted phones before, I followed http://forum.xda-developers.com/showthread.php?t=2258633 Motochopper how to. I ran into a problem. I click the superuser app that was installed onto my phone, and it tells me that "The Superuser binary (su) must be updated. Please choose an installation method. Recovery mode installation is recommended for HTC devices." I click install and it tells me there was an error. I would like to root my phone along with potentially installing CWM so that I can easily install Cyanogenmod when they release a stable verison for the S4. Also would love to install titanium backup along with some Adfree apps.
Any help would be very much appreciated.
OK, so it looks like you already have it rooted.
When super SU asks that question, dont install via CWM, tell it to just install normally.
Once you have SuperSU working, Download Rom Manager from the play store and install CWM Recovery right from within the ROM Manager app.
It will give you the option to pick between two types of CWM(ClockWorkMod). The Touch version, like its name gives you the ability to use the touch screen and not only the volume up/down + Power button.
Telling it to install normally causes it to just tell me there was an error, it also tells me it is out of date as well. Titanium Backup tells me that it cant get root access and I was never asked about it.
OK, so your phone is not rooted then.
Your going to have to try rooting it again or flashing an already rooted rom with Odin.
I just tried it again, this time it said failure after the install of the superuser.apk. I just read that one of the later updates by samsung can make it harder to root. I just got my phone and i was fully updated. What Roms, are already rooted for the S4. I am actually enjoying some of the default apps that came with the phone.
Wicked (and most ROMs that don't include the [STOCK] tag) are pre-rooted...but you'll need to ODIN a custom recovery first then flash the ROM.
If you want to stay on rooted stock, follow the steps in the "root May 7 MDL" thread to ODIN a rooted kernel, and you'll be good to go.
(You don't need root access to get a custom recovery flashed)
Basically, any of your options are pretty straightforward, but they're going to involve Odin-ing stuff.
So there isn't really a way to just root my phone without installing a custom rom?
There was before the second update, with the second update rooting got just a little bit more steps
Sent from my SGH-M919 using xda premium
movieaddict said:
There was before the second update, with the second update rooting got just a little bit more steps
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
So is there a way to keep it stock but root it? What are the other steps I would have to take. Why does Samsung not like people rooting their phones, I thought carriers were the ones that hated people rooting their phones
Spud37 said:
So is there a way to keep it stock but root it? What are the other steps I would have to take. Why does Samsung not like people rooting their phones, I thought carriers were the ones that hated people rooting their phones
Click to expand...
Click to collapse
Are you still on the MDB firmware or have you done any over the air updates? Specifically the May 7 update which is MDL. Motochopper is specifically for then older firmware (MDB) and it won't work if you are already on the updated. MDL firmware. In which case you would have to follow these instructions to acquire root.
http://forum.xda-developers.com/showthread.php?p=41162041
I usually use a market app called root checker to quickly check if I do have root.
And yes you can be rooted on stock.
Sent from my SGH-M919
lazaro17 said:
Are you still on the MDB firmware or have you done any over the air updates? Specifically the May 7 update which is MDL. Motochopper is specifically for then older firmware (MDB) and it won't work if you are already on the updated. MDL firmware. In which case you would have to follow these instructions to acquire root.
http://forum.xda-developers.com/showthread.php?p=41162041
I usually use a market app called root checker to quickly check if I do have root.
And yes you can be rooted on stock.
Sent from my SGH-M919
Click to expand...
Click to collapse
Root checker says no root. I believe it does have that over the air update installed. T Mobile updated it when they gave me the phone, because they thought I didn't really know anything about phones. I assume this means I have to follow another method to root my phone?
If you have the MDL update you have to root using the steps listed here:
http://forum.xda-developers.com/showthread.php?t=2268880
Easily done, just a few more steps.
ronin4740 said:
If you have the MDL update you have to root using the steps listed here:
http://forum.xda-developers.com/showthread.php?t=2268880
Easily done, just a few more steps.
Click to expand...
Click to collapse
This is going to sound like a dumb question but from reading all of that I need to use ODIN to install the ROOT_M919?UVUAMDL onto the phone? that should root the phone and allow me to install ROM Manager and install CWM from there right?
Also would doing this delete everything I have on my phone right now?
Spud37 said:
This is going to sound like a dumb question but from reading all of that I need to use ODIN to install the ROOT_M919?UVUAMDL onto the phone? that should root the phone and allow me to install ROM Manager and install CWM from there right?
Also would doing this delete everything I have on my phone right now?
Click to expand...
Click to collapse
No, you use Odin to install one of the recoveries. You use the recovery to install the zip ROOT_M919?UVUAMD. Personally I didn't use that file. I installed the kernel in recovery and SuperSU in recovery. And no, it won't delete things on your phone.
Atmazzz said:
No, you use Odin to install one of the recoveries. You use the recovery to install the zip ROOT_M919?UVUAMD. Personally I didn't use that file. I installed the kernel in recovery and SuperSU in recovery. And no, it won't delete things on your phone.
Click to expand...
Click to collapse
Thank you so much, I am about to go and do this. I will use the kernel you suggested since that looks like a better option, after flashing the kernal should i reboot and just use it normally for a bit and then go to recovery and flash SuperSU?
EDIT: The steps on the thread for ODIN are for installing a rooted ROM, I am assuming its still the same steps for installing a recovery instead of a rooted ROM
Spud37 said:
after flashing the kernal should i reboot and just use it normally for a bit and then go to recovery and flash SuperSU?
Click to expand...
Click to collapse
If I remember right I just flashed them both at the same time. Just make sure you do the kernel first.
---------- Post added at 02:01 PM ---------- Previous post was at 01:59 PM ----------
Spud37 said:
EDIT: The steps on the thread for ODIN are for installing a rooted ROM, I am assuming its still the same steps for installing a recovery instead of a rooted ROM
Click to expand...
Click to collapse
The steps for Odin are for the stock rom, but yes, you use it the same way for a recovery.
Atmazzz said:
If I remember right I just flashed them both at the same time. Just make sure you do the kernel first.
---------- Post added at 02:01 PM ---------- Previous post was at 01:59 PM ----------
The steps for Odin are for the stock rom, but yes, you use it the same way for a recovery.
Click to expand...
Click to collapse
Okay I didn't get any error using ODIN, however when I try and boot into CWM using Volume Up + Power it just goes to android recovery. Which doesn't have any of the options I need. Am I just booting up the wrong way, or did I do something wrong. I tried both the touch version and the non-touch version
Spud37 said:
Okay I didn't get any error using ODIN, however when I try and boot into CWM using Volume Up + Power it just goes to android recovery. Which doesn't have any of the options I need. Am I just booting up the wrong way, or did I do something wrong. I tried both the touch version and the non-touch version
Click to expand...
Click to collapse
2 options. uncheck auto reboot in Odin. When Odin is done, unplug your phone, pull your battery, then boot into recovery. Or .. when Odin is done and it reboots your phone, keep holding volume up to get to recovery.
Atmazzz said:
2 options. uncheck auto reboot in Odin. When Odin is done, unplug your phone, pull your battery, then boot into recovery. Or .. when Odin is done and it reboots your phone, keep holding volume up to get to recovery.
Click to expand...
Click to collapse
Thank You so much. However it now seems like I have both Super User and SuperSU installed.
How did you root? Did you install the ROOT_M919?UVUAMDL zip and install SuperSU?
Mine Note II is SGH-I317M with baseband version of I317MVLUCMK5 and KNOX.
I have tried CF-Auto-Root and Root SuperSU but weren't able to root my note II.
I have tried using different version of Odin, reinstalled the USB driver and tried using philz touch and cwm6 root to backup and root.
Nothing worked........Can't even start SuperSU.....
KNOX keep giving me security notice "An attempt to access a secure area on your device without authorisation has been blocked."
I also tried an updated Superuser. Still nothing worked....
Any idea anyone?
Thank you very much.
Stewegg said:
Mine Note II is SGH-I317M with baseband version of I317MVLUCMK5 and KNOX.
I have tried CF-Auto-Root and Root SuperSU but weren't able to root my note II.
I have tried using different version of Odin, reinstalled the USB driver and tried using philz touch and cwm6 root to backup and root.
Nothing worked........Can't even start SuperSU.....
KNOX keep giving me security notice "An attempt to access a secure area on your device without authorisation has been blocked."
I also tried an updated Superuser. Still nothing worked....
Any idea anyone?
Thank you very much.
Click to expand...
Click to collapse
You need to disable knox first
http://forum.xda-developers.com/showthread.php?p=49860203
Stewegg said:
Can't even start SuperSU
Click to expand...
Click to collapse
This is really weird, when I did this to my SGH-I747/M it was updated to stock 4.3 so it had KNOX and I got the same message as you but to disable it, all I did was open SuperSU and it prompts me to disable KNOX and then it's "fully" rooted and I could install a custom recovery after that.
I know it worked on the S3 because it's currently rooted running a custom ROM. Are you using the right version of Odin? I was trying to use 1.85 I think it was and it wasn't working at first, I tried 3.09 and it worked like a dream.
Did you remember to go into the Security Settings and turn off Reactivation Lock? I know this can play a factor when rooting with KNOX.
Also, KNOX never goes away, even though I'm running an AOSP ROM now on the S3, it still shows the KNOX counter with 0x1, even with it disabled. I can also not get any ROM's lower then 4.3 to work anymore so I can no longer run RootBox 4.2.2 on the S3.
I'm not sure if it's just me, or just my phone, but since that KNOX update was already on it when I got the phone used, it will not let me go to any ROM's lower then 4.3
VeeDaub said:
This is really weird, when I did this to my SGH-I747/M it was updated to stock 4.3 so it had KNOX and I got the same message as you but to disable it, all I did was open SuperSU and it prompts me to disable KNOX and then it's "fully" rooted and I could install a custom recovery after that.
I know it worked on the S3 because it's currently rooted running a custom ROM. Are you using the right version of Odin? I was trying to use 1.85 I think it was and it wasn't working at first, I tried 3.09 and it worked like a dream.
Did you remember to go into the Security Settings and turn off Reactivation Lock? I know this can play a factor when rooting with KNOX.
Also, KNOX never goes away, even though I'm running an AOSP ROM now on the S3, it still shows the KNOX counter with 0x1, even with it disabled. I can also not get any ROM's lower then 4.3 to work anymore so I can no longer run RootBox 4.2.2 on the S3.
I'm not sure if it's just me, or just my phone, but since that KNOX update was already on it when I got the phone used, it will not let me go to any ROM's lower then 4.3
Click to expand...
Click to collapse
Where is the Reactivation Lock located?
I can not find it in the Security Settings.
mrevankyle said:
You need to disable knox first
http://forum.xda-developers.com/showthread.php?p=49860203
Click to expand...
Click to collapse
I was following the steps in the post you have posted.
When I tried to flash the DrKetan_MultiTool_AdvanceV5, it gives me an error: E:signature verification failed. and stopped the flash.
Any idea?
Stewegg said:
I was following the steps in the post you have posted.
When I tried to flash the DrKetan_MultiTool_AdvanceV5, it gives me an error: E:signature verification failed. and stopped the flash.
Any idea?
Click to expand...
Click to collapse
hey man i have the same phone as you, just found an easy way to root it after struggling. Just updated to Stock 4.3 Bell Firmware using odin, completely fresh phone.
How to root it:
1. Flash philz recovery in odin "philz_touch_6.19.3-t0lteatt.tar.md5" (Download mode= Vol Down + Home + Power)
2. Reboot back into android once
3. Power off phone
4. Boot into recovery (Vol Up + Home + Power)
5. Goto philz settings->Reroot rom (or something to that effect)
6. Recovery will tell you done, and to reboot and install SuperSU from Play Store
7. Reboot download and install SuperSU from Play Store
8. Open SuperSU it will immediately ask if you would like to disable Knox.. say yes
9. Done
Link to philz recovery tar for our phone i317M
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lteatt/philz_touch_6.19.3-t0lteatt.tar.md5
Does this work?
My wife's Rogers note2 is bone stock running I317MVLUCMK5.
She is paranoid about Knox and possibly killing her phone.
She wants me to get it rooted, but I'm struggling to find a clear cut answer.
Also, it would be better if anyone knows how to (if possible) downgrade to 4.1.2 and start from there... As I know how to do that one like the back of my hand.
Sent from my SGH-I317 using Tapatalk
Stewegg said:
Mine Note II is SGH-I317M with baseband version of I317MVLUCMK5 and KNOX.
I have tried CF-Auto-Root and Root SuperSU but weren't able to root my note II.
I have tried using different version of Odin, reinstalled the USB driver and tried using philz touch and cwm6 root to backup and root.
Nothing worked........Can't even start SuperSU.....
KNOX keep giving me security notice "An attempt to access a secure area on your device without authorisation has been blocked."
I also tried an updated Superuser. Still nothing worked....
Any idea anyone?
Thank you very much.
Click to expand...
Click to collapse
Simple. First get the root. Like the su binary and stuff. once you are rooted get suersu. What I mean by first get root is literally get root through a program or something. After this you will have root but you wont have root access. So get supersu now and launch the app. It will ask to update your su binary. Say yes. then the thing will say something about knox then ask you if you want to try to disable knox. Tap yes and knox should be disabled and your su binary should be updated and working.
I'm exactly in the middle of nowhere .. Try to root with CF method. After the first try and reboot. I got the knox alert "unauthorized, bla, bla" the thing is that I can't get the full root or return to stock. Also when I tried to install knox in order to Uninstaller it, I can't. My phone is not allowed to use knox any more... I already tried to download Su and update it in order to disable knox with no success.... Stupid knox and stupid 4.3:crying:
My phone is I317M Rogers, it run stock 4.3. I followed this guide, http://forum.xda-developers.com/showthread.php?t=2618261 rooted success.
Eun-Hjzjined said:
Does this work?
My wife's Rogers note2 is bone stock running I317MVLUCMK5.
She is paranoid about Knox and possibly killing her phone.
She wants me to get it rooted, but I'm struggling to find a clear cut answer.
Also, it would be better if anyone knows how to (if possible) downgrade to 4.1.2 and start from there... As I know how to do that one like the back of my hand.
Sent from my SGH-I317 using Tapatalk
Click to expand...
Click to collapse
ifentanez said:
I'm exactly in the middle of nowhere .. Try to root with CF method. After the first try and reboot. I got the knox alert "unauthorized, bla, bla" the thing is that I can't get the full root or return to stock. Also when I tried to install knox in order to Uninstaller it, I can't. My phone is not allowed to use knox any more... I already tried to download Su and update it in order to disable knox with no success.... Stupid knox and stupid 4.3:crying:
Click to expand...
Click to collapse
koodiifin said:
hey man i have the same phone as you, just found an easy way to root it after struggling. Just updated to Stock 4.3 Bell Firmware using odin, completely fresh phone.
How to root it:
1. Flash philz recovery in odin "philz_touch_6.19.3-t0lteatt.tar.md5" (Download mode= Vol Down + Home + Power)
2. Reboot back into android once
3. Power off phone
4. Boot into recovery (Vol Up + Home + Power)
5. Goto philz settings->Reroot rom (or something to that effect)
6. Recovery will tell you done, and to reboot and install SuperSU from Play Store
7. Reboot download and install SuperSU from Play Store
8. Open SuperSU it will immediately ask if you would like to disable Knox.. say yes
9. Done
......
Click to expand...
Click to collapse
koodiifin's way worked perfectly!
Thank you koodiifin!
I'm sorry i had the wrong links and because of this i had miss information. So i formally apologize by updating with the proper links.
this first method doesn't work with the Sph-L710T or the Sph-L710 on NJ2/NJ3
First method: You can root the stock 4.4.2 ND8/NDC:laugh:
1st. Make sure your on 4.4.2 ND8 or NDC
2nd. Download Towel Root
3rd. Place Towel Root in sdcard or internal storage
4th. With any file manager find and install Towel Root
5th. Open Towel Root and well root
6th. Go to play store and download https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en and also https://play.google.com/store/apps/details?id=stericson.busybox&hl=en let super user update the binary
7th. Flash any recovery you want {personally i went with PhilZ Touch (this was before PhilZ had a root Option)}
8th. Enjoy your rooted stock 4.4.2 ND8/NDC
Down below is one more way too root Stock ND8/NDC/NJ2/NJ3 or NF4/OA3 (L710T) and basically any other update
(link to the almighty ODIN)
Second Method: mostly recommended
1st. Odin flash TWRP
2nd. In Odin choose PDA, PA or AP then select the TWRP Tar you just downloaded
3rd. Make sure Auto reboot is unchecked (also at this time your s3 should be in download mode)
4th. Hit start and let Odin let it finish!!
5th. Hold power button to turn off your S3, after it turns off about 10 seconds later it will turn back on to the battery charging screen so before that quickly hold Volume+ and Home, to boot into recovery
6th. now your in TWRP
7th. so to root your stock rom with TWRP flash the following file SuperSU.zip by Chain fire (pro tip. Install any other custom recovery the same way I did for TWRP above if it is in .tar format)
and here is Philz recovery for the D2Lte 6.48.4 ( which you must flash in TWRP)
and here is TWRP that was made specifically for the D2Rephersher/triband/L710T TWRP (which you must flash in a recovery)
Third method Most recent.
Hidyman said:
This is in reference to Samsung Galaxy S3 for Boost Mobile SPH-L710.
Just want to let anyone out there that updated their Boost S3 to L710VPUC0J1 know that you can still root and/or ROM your phone.
Use the instructions to (use Odin to) update the recovery to TWRP first (in the second set of instructions). I had trouble trying to go right to PhilZ Recovery (which I believe is based off of ClockWorkMod). I Had to do the TWRP (twrp-2.8.7.0-d2spr.img.tar) first.
It was the only way to get it to actually accept the recovery, not sure why, maybe because the latest Samsung firmware fixed an exploit or two.
This is an older phone, but it is still a viable one.
I hope this helps someone out there.
It took me a while to figure this quandary out.
As always this WILL flag KNOX, but I'm sure this won't be an issue at this date and time (8/2016).
Click to expand...
Click to collapse
work on ND8 rom? sprint phone?
Tekone said:
work on ND8 rom? sprint phone?
Click to expand...
Click to collapse
i want to say yes but towel root does come with a warning that it might brick your device.....but i want to say yes since most things that can be done to the ND8 can be done to the NDC and also in reverse order.....so try it and report back it will be good to know if it works on both bootloaders
Sprint S3 Android 4.4.2 ND8-It works!
I just used this method to root my Sprint S3 running Android 4.4.2 and ND8, since my USB port is on the fritz, and it worked successfully. I have root, and was able to do a full apps backup with Titanium Backup, and gained root access in ES File Explorer. Next, download and install a custom backup. Thanks, great job, and could not have been made easier to do!
oops
Rooted the phone in one click. Unfortunately, I lost all data (no 3G or 4G connection). Did I goof? I'm looking in the stickies and can't seem to find an answer. I'd appreciate any help I can get.
henhun said:
Rooted the phone in one click. Unfortunately, I lost all data (no 3G or 4G connection). Did I goof? I'm looking in the stickies and can't seem to find an answer. I'd appreciate any help I can get.
Click to expand...
Click to collapse
ND8 or NDC? have you tried updating your profile/PRL?
6th_Hokage said:
ND8 or NDC? have you tried updating your profile/PRL?
Click to expand...
Click to collapse
Ya know. People keep talking about ND8 and ND___. I have no idea what that means. I know I should be embarrassed.
UPDATE: FIGURED IT OUT, BASEBAND VERSION. GOTCHA. IT IS NDC.
I was JUST coming back to update my post. I DID update the PRL and restarted my phone. That seems to have done the trick. Thank GOD I got my data connection back!! It worked. Even though I found the info somewhere else, thank you so much for the quick reply. PRL update fixes the problem. You're awesome.
I used it before i had a custom recovery. And on reboot i wouldnt have root. After i ran it root checker told me i was rooted then reboot killed. I installed philz and all was ok
Sent from my SPH-L710 using XDA Free mobile app
jbnorton0524 said:
I used it before i had a custom recovery. And on reboot i wouldnt have root. After i ran it root checker told me i was rooted then reboot killed. I installed philz and all was ok
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
many users of basically the same phone report different things with every root method out there. If it worked for you that's great tell other users what you did for it to work and if it didn't work, then ask for help and you will get help; some people don't have success with any method while others do with all of the methods.....my phone falls under every method.....
Successful Towelroot on VM Galaxy S3 4.4.2.NDC
6th_Hokage said:
you can root the stock 4.4.2
first step make sure your on 4.4.2
second step download Towel Root
third step place Towel Root in sdcard or internal storage
fourth step with any file manager find and install Towel Root
fifth step root
sixth step go to play store and download Superuser (Chainfire) and also Busy Box (Stericson) let super user update the binary
seventh step flash any recovery you want personally i went with Philliz Touch
eighth step if you want flash a custom rom now if not enjoy your rooted stock 4.4.2
Click to expand...
Click to collapse
Straight forward, fast and easy. I did notice the following:
1) Updating binary reported it did not successfully install. I've seen this before on other devices, but everything worked well. Ext SD and Camera all OK. Everything works fine so far - Titanium, Nandroid, Root Browser, etc.
2) At one point, I was directed to install Busy Box. Having done this on other devices, I said "Yes" and installed it.
3) I see that my device now shows Device Status as Custom ( was Normal before, if I remember correctly). Is this due to Busy Box?
4) Is Device Status the only way to know the KNOX Status? I see no yellow triangle as I did on my Galaxy Reverb.
5) I got a Google warning to uninstall Towelroot since it is usafe and a security exploit. I understand that.
I would like to verify the KNOX status and if tripped in the Towelroot process, to let potential users know of that possibility.
Thank You! And thanks to everyone who has continued to work on keeping root free!
Dave
dave260 said:
Straight forward, fast and easy. I did notice the following:
1) Updating binary reported it did not successfully install. I've seen this before on other devices, but everything worked well. Ext SD and Camera all OK. Everything works fine so far - Titanium, Nandroid, Root Browser, etc.
2) At one point, I was directed to install Busy Box. Having done this on other devices, I said "Yes" and installed it.
3) I see that my device now shows Device Status as Custom ( was Normal before, if I remember correctly). Is this due to Busy Box?
4) Is Device Status the only way to know the KNOX Status? I see no yellow triangle as I did on my Galaxy Reverb.
5) I got a Google warning to uninstall Towelroot since it is unsafe and a security exploit. I understand that.
I would like to verify the KNOX status and if tripped in the Towelroot process, to let potential users know of that possibility.
Thank You! And thanks to everyone who has continued to work on keeping root free!
Dave
Click to expand...
Click to collapse
Knox only notifies Samsung that your device isn't stock anymore not necessarily rooted like with a custom recovery and then flashed mods and what not but if you Odin the stock rom it resets the counters so Samsung will never know....and that i have noticed TowelRoot doesn't trip that counter.....only the recoveries and when you update the binary (<---completely forgot to fix that) you must hit the option normal not TWRP/CWM
churninern said:
I just used this method to root my Sprint S3 running Android 4.4.2 and ND8, since my USB port is on the fritz, and it worked successfully. I have root, and was able to do a full apps backup with Titanium Backup, and gained root access in ES File Explorer. Next, download and install a custom backup. Thanks, great job, and could not have been made easier to do!
Click to expand...
Click to collapse
That's great news because same boat here. It worked on 4.3 as well.
I had the phone hacked before and something must not be fully stock so the Ota fails.
I downloaded a package and mobile odin should flash it properly and then I can root it with this again and install a nice modified TouchWiz rom.
Darkangels6sic6 said:
That's great news because same boat here. It worked on 4.3 as well.
I had the phone hacked before and something must not be fully stock so the Ota fails.
I downloaded a package and mobile odin should flash it properly and then I can root it with this again and install a nice modified TouchWiz rom.
Click to expand...
Click to collapse
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all
Knox Counter and "Device Status"
6th_Hokage said:
Knox only notifies Samsung that your device isn't stock anymore not necessarily rooted like with a custom recovery and then flashed mods and what not but if you Odin the stock rom it resets the counters so Samsung will never know....and that i have noticed TowelRoot doesn't trip that counter.....only the recoveries and when you update the recovery you must hit the option normal not TWRP/CWM
Click to expand...
Click to collapse
Thanks for your response. I may be over thinking these indicators. All I did was Towelroot, successfully. On the phone, the "About Device, Status" now says CUSTOM (was "Official"). The Knox counter according to app "Phone Info" shows Knox Counter at 0x0. As you said, since the counter is not tripped, should be no problem on warranty. So then Device Status CUSTOM is not a problem? I'm not really worried about warranty at this point, but I think I'll hold off further mods for another 6 moths.
Thanks again for your help!
6th_Hokage said:
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all
Click to expand...
Click to collapse
Thanks. I tried the md8 and mk3 "mk3 is what it's on". Both just restart and get stuck on splash screen :/.
I have to go to download mode and and restart it that way to boot system back up.
Do you have any other suggestion. I'm not sure what part of the system is altered. It seems like a stock recovery and it's stock firmware "now rooted". Maybe the kernel.
I can't use USB at all.
I'm guessing maybe I should install twrp. Then install a stock zip or try out a 4.3 rom that way. I would like to get to md8 one way or another. Most md8 Roms want you to odin or flash an md8 base.
Darkangels6sic6 said:
Thanks. I tried the ND8 and MK3 "MK3 is what it's on". Both just restart and get stuck on splash screen :/.
I have to go to download mode and and restart it that way to boot system back up.
Do you have any other suggestion. I'm not sure what part of the system is altered. It seems like a stock recovery and it's stock firmware "now rooted". Maybe the kernel.
I can't use USB at all
I'm guessing maybe I should install TWRP. Then install a stock zip or try out a 4.3 rom that way. I would like to get to md8 one way or another. Most ND8 Roms want you to Odin or flash an md8 base.
Click to expand...
Click to collapse
cause they need the ND8 base to work as intended...my suggestion would be to get the usb port on your phone fixed but i don't know how expensive that will be
6th_Hokage said:
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all
Click to expand...
Click to collapse
6th_Hokage said:
cause they need the ND8 base to work as intended...my suggestion would be to get the usb port on your phone fixed but i don't know how expensive that will be
Click to expand...
Click to collapse
I was afraid you would say that.
Holy crap. May I say, I am quite impressed. I never planned on rooting my S3 (I like it that much!) but this just looked so damn easy to do and it was!
For the curious! I have a Virgin Mobile S3, and I'm on Kitkat 4.4.2, baseband NDC. Verified root with Root Checker Basic. No problems with mobile data.
Many thank yous, 6th_Hokage!
strangelady said:
Holy crap. May I say, I am quite impressed. I never planned on rooting my S3 (I like it that much!) but this just looked so damn easy to do and it was!
For the curious! I have a Virgin Mobile S3, and I'm on Kitkat 4.4.2, baseband NDC. Verified root with Root Checker Basic. No problems with mobile data.
Many thank yous, 6th_Hokage!
Click to expand...
Click to collapse
your welcome strangelady and if you want check out the links in my signature area for other cool stuff
added two more t=root methods
Hey, everyone. It's been a long time since I've rooted my phone. I ended up hard bricking it and getting a new one. (I tried using ROM Manager to update my Clockwork Mod and it downloaded and installed, and when it said it needed to restart the device, I accepted, and that was the last time I was able to use the phone).
Anyway, I got it replaced and I haven't rooted it. It's been about 8 months or so and I've decided I want to root my phone again. However, after doing a little research, I saw that rooting is now different when the device is running 4.4.2. I want to be able to run CyanogenMod and flash nightlies and whatnot. Is it safe for me to root my phone and flash CyanogenMod? If so, could someone direct me step by step to doing it? It's been so long and I don't want to brick another phone.
tl;dr -> havent rooted a phone in almost a year, kinda forgot how. SPH-L710 running 4.4.2. is it safe? how do i do it? i want cyanogenmod
markopolomp said:
Hey, everyone. It's been a long time since I've rooted my phone. I ended up hard bricking it and getting a new one. (I tried using ROM Manager to update my Clockwork Mod and it downloaded and installed, and when it said it needed to restart the device, I accepted, and that was the last time I was able to use the phone).
Anyway, I got it replaced and I haven't rooted it. It's been about 8 months or so and I've decided I want to root my phone again. However, after doing a little research, I saw that rooting is now different when the device is running 4.4.2. I want to be able to run CyanogenMod and flash nightlies and whatnot. Is it safe for me to root my phone and flash CyanogenMod? If so, could someone direct me step by step to doing it? It's been so long and I don't want to brick another phone.
tl;dr -> havent rooted a phone in almost a year, kinda forgot how. SPH-L710 running 4.4.2. is it safe? how do i do it? i want cyanogenmod
Click to expand...
Click to collapse
you wont brick it by rooting but here is 3 methods
1. first and mostly recommended flash Philz recovery for the D2Lte in Odin just make sure your on the latest one then root your stock rom with the option under Philz settings called Re-root(SuperSU)
2. you can use any recovery and flash the SuperSU zip from Chain fire
3. you can just use TowelRoot for the actual rooting process then download SuperSU and BusyBox from the PlayStore
method 2 implies that you already have a recovery installed
method 3 will give you root but no recovery
6th_Hokage said:
you wont brick it by rooting but here is 3 methods
1. first and mostly recommended flash Philz recovery for the D2Lte in Odin just make sure your on the latest one then root your stock rom with the option under Philz settings called Re-root(SuperSU)
2. you can use any recovery and flash the SuperSU zip from Chain fire
3. you can just use TowelRoot for the actual rooting process then download SuperSU and BusyBox from the PlayStore
method 2 implies that you already have a recovery installed
method 3 will give you root but no recovery
Click to expand...
Click to collapse
Is there a video of how to root doing this from start to finish? I'm just too nervous to do it on my own without visuals lol
markopolomp said:
Is there a video of how to root doing this from start to finish? I'm just too nervous to do it on my own without visuals lol
Click to expand...
Click to collapse
Towelroot is super easy to use, its a one click method.
You can find a full guide for the S3 here
Pretty simple to do though,
Download the TowelRoot apps from http://towelroot.com.
Enable Unknown sources on your phones, normally this option located on Settings > Security.
Install the downloaded app (tr.apk).
Now run the app, just tap the “make it ra1n” button to start rooting.
Let the app perform the root job, wait for about 15 seconds and your phone will restart automatically.
As soon as the phone is turned on, update SuperSU to v1.99r4 or newer.
vagabond007 said:
Towelroot is super easy to use, its a one click method.
Pretty simple to do though,
Download the TowelRoot apps.
Enable Unknown sources on your phones, normally this option located on Settings > Security.
Install the downloaded app (tr.apk).
Now run the app, just tap the “make it ra1n” button to start rooting.
Let the app perform the root job, wait for about 15 seconds and your phone will restart automatically.
As soon as the phone is turned on, update SuperSU to v1.99r4 or newer.
Click to expand...
Click to collapse
In my case, TowelRoot didn't work due to Samsung Knox secure boot locks the recovery rom. You can't either go to recovery mode at all or read your phone internal storage/external SD storage from TWRP. I flashed CF-Auto-Root-d2spr-d2spr-sphl710.tar.md5 and it would get SuperSU installed to your phone. The SuperSu stopped working when disabling Knox.
Alternatively, I tried to downgrade to the 4.04 or 4.1.2 stock rom by Odin, but failed. So far, I don't have any way to root my phone and install CM11. Any suggestions will be appreciated.
wuyiL said:
In my case, TowelRoot didn't work due to Samsung Knox secure boot locks the recovery rom. You can't either go to recovery mode at all or read your phone internal storage/external SD storage from TWRP. I flashed CF-Auto-Root-d2spr-d2spr-sphl710.tar.md5 and it would get SuperSU installed to your phone. The SuperSu stopped working when disabling Knox.
Alternatively, I tried to downgrade to the 4.04 or 4.1.2 stock rom by Odin, but failed. So far, I don't have any way to root my phone and install CM11. Any suggestions will be appreciated.
Click to expand...
Click to collapse
that's why you go with the first option i gave.....
6th_Hokage said:
that's why you go with the first option i gave.....
Click to expand...
Click to collapse
Here here. And, you'll learn how to use Odin and philz. Very very valuable (imo) ?
Sent from my SPH-L710 using Xparent Cyan Tapatalk 2
markopolomp said:
Is there a video of how to root doing this from start to finish? I'm just too nervous to do it on my own without visuals lol
Click to expand...
Click to collapse
Have you figured that out?
I rooted it using Kingroot, flashed LiquidSmooth, CyanogenMod, Pac Rom, and SlimKAT, but decided that I wanted to return back to stock. I noticed that none of my apps can write to the phone's internal storage (i.e. Jotterpad, Monospace). I want to be able to return my phone to it's out-of-the-box state. Are there any methods that don't require ODIN? If so, please dumb it down.
Some KitKat/Lollipop roms made before October 2015 can also be helpful. Thanks in advance.
It depends on the build your bootloader is from.
Open terminal emulator and enter this:
getprop ro.bootloader
I'm guessing it's a 4.4.2 build, in which case you can find enewman17's corresponding thread that has the stock roms. Most are in the General section I believe.
Flash in recovery as per his instructions and factory reset.
DocHoliday77 said:
It depends on the build your bootloader is from.
Open terminal emulator and enter this:
getprop ro.bootloader
I'm guessing it's a 4.4.2 build, in which case you can find enewman17's corresponding thread that has the stock roms. Most are in the General section I believe.
Flash in recovery as per his instructions and factory reset.
Click to expand...
Click to collapse
I will have to root my phone again. I'm probably going to end up flashing CyanogenMod 12.1.
--UPDATE--
tried rooting my phone again can't download kingroot, or transfer supersu.zip or kingroot.apk to my phone. now what?
Simplest method to root in my opinion would be to flash supersu from TWRP. Supersu can be on an external SD card.
Is the phone an i747 or i747m? There are stock KK ROMs for the i747m that can be flashed via Odin but not for the i747.
ZentixZaneic said:
I will have to root my phone again. I'm probably going to end up flashing CyanogenMod 12.1.
--UPDATE--
tried rooting my phone again can't download kingroot, or transfer supersu.zip or kingroot.apk to my phone. now what?
Click to expand...
Click to collapse
I dont know about kingroot. Heard of it, but I don't recall ever seeing people use it for the S3.
But aside from that if all you want is to flash a rom, you don't need root. You need a custom recovery to flash it with and that's it.
If you still need help with anything though, please give us detailed info about what you've done, what you want to do and what is the current state of your device.
Hope that helps!
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
I dont know about kingroot. Heard of it, but I don't recall ever seeing people use it for the S3.
But aside from that if all you want is to flash a rom, you don't need root. You need a custom recovery to flash it with and that's it.
If you still need help with anything though, please give us detailed info about what you've done, what you want to do and what is the current state of your device.
Hope that helps!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
So I can flash CyanogenMod without root? Also, I can't transfer files between phone or PC and can't download files on phone either. Now what?
Apparently, none of my installed apps can update on their own either. Neither can Google Play. The version of Google Play I'm running is very old. This is becoming very problematic for me.
--UPDATE--
I went back to a backup I made. Original problem still exists.