I have an AT&T Samsung Galaxy Note 2 1317.
Android version: 4.4.2
Build: KOT49H.1317UCUNE5
Kernel: 3.0.31-1728680
[email protected] SWDD6020 #1
AT&T recently did an OTA update to version 4.4.2.
I was running 4.1.1
I do have that same kitkat version on my Nexus 7 and it works wonderful, unfortunately when it updated my phone it created several problems.
My sound is not work properly goes on and off.
Phone calls are broken up people hear me but I can't hear them because of breaking up.
My battery is no longer holding a charge for long and the phone get very hot.
Phone randomly goes black and I have to remove the battery to get it going again.
I would like to get it working.
I do have Marks (skipsoft.net) toolkit but there is no 4.4.2 version.
Not sure what to do any help would sure be appreicated.
Donna aka gramme
Why not just flash a custom rom like an stock touchwiz rom
Sound problem reply
terpin32 said:
Why not just flash a custom rom like an stock touchwiz rom
Click to expand...
Click to collapse
Is there a rom for 4.4.2? where do I get it?
Thanks for your help
gramme aka Donna
gramme66 said:
Is there a rom for 4.4.2? where do I get it?
Thanks for your help
gramme aka Donna
Click to expand...
Click to collapse
Heres the rom I'm running right now
https://www.androidfilehost.com/?fid=23501681358557170
Related
Hello,
I need to downgrade my S4 from 4.4.2 to 4.3 (GT-I9505).
I opened another thread for help but nobody did,so now im asking for a tutorial how to downgrade my phone.
Thanks.
Here are like 50,000 Users online and nobody can answer this simple question ?
Cupas said:
Here are like 50,000 Users online and nobody can answer this simple question ?
Click to expand...
Click to collapse
Not everyone is looking at YOUR question. Have some respect/patience. There are threads guiding how to flash a different firmware version all over the net using Odin, in the hour you waited for a response, you could have easily used Google to find your solution.
Now you may have an issue about Knox, but since you are going from 4.4 to 4.3 (both a knox bootloader) i don't think there will be any issues.
If you have a custom recovery, just flash a 4.3 ROM
If not, use Odin to flash the 4.3 official firmware package.
With the information i provided you, you should easily be able to achieve what you need to do via Google search.
elesbb said:
Not everyone is looking at YOUR question. Have some respect/patience. There are threads guiding how to flash a different firmware version all over the net using Odin, in the hour you waited for a response, you could have easily used Google to find your solution.
Now you may have an issue about Knox, but since you are going from 4.4 to 4.3 (both a knox bootloader) i don't think there will be any issues.
If you have a custom recovery, just flash a 4.3 ROM
If not, use Odin to flash the 4.3 official firmware package.
With the information i provided you, you should easily be able to achieve what you need to do via Google search.
Click to expand...
Click to collapse
Are you sure the 4.4 to 4.3 thing works? I've been using 4.2 on my S4 (I9500) all along, and recently upgraded to 4.4. I strongly dislike KitKat and would ideally like to go back to 4.2, but if there's no way of doing so, 4.3 would be fine.
Bl1zz4rd said:
Are you sure the 4.4 to 4.3 thing works? I've been using 4.2 on my S4 (I9500) all along, and recently upgraded to 4.4. I strongly dislike KitKat and would ideally like to go back to 4.2, but if there's no way of doing so, 4.3 would be fine.
Click to expand...
Click to collapse
I have not tried it myself. It was just speculation since they are both knox bootloaders. The worst that will happen is Odin will say it failed OR your Knox will be tripped (which i see highly unlikely as knox detects changes from what "should" be there)
Samy you s*****
Bl1zz4rd said:
Are you sure the 4.4 to 4.3 thing works? I've been using 4.2 on my S4 (I9500) all along, and recently upgraded to 4.4. I strongly dislike KitKat and would ideally like to go back to 4.2, but if there's no way of doing so, 4.3 would be fine.
Click to expand...
Click to collapse
Just for info you cant go to 4.2.2 from 4.4.2 am trying right now and i get error every single time (5 times), 4.3 could work fine but.... If you have prblems with 4.4.2 like others and me too with screen goes black, lock screen is retarded and many other f****** **** i find stable firmware Blck edition and here is link so good luck man. i9505 Black Edition only one withouth all known problems http://www.sammobile.com/firmwares/3/?download=28511
AlenKing said:
Just for info you cant go to 4.2.2 from 4.4.2 am trying right now and i get error every single time (5 times), 4.3 could work fine but.... If you have prblems with 4.4.2 like others and me too with screen goes black, lock screen is retarded and many other f****** **** i find stable firmware Blck edition and here is link so good luck man. i9505 Black Edition only one withouth all known problems http://www.sammobile.com/firmwares/3/?download=28511
Click to expand...
Click to collapse
Thanks for the help. There were some people who said that it's impossible to go back to 4.2.2 from 4.4.2 and some that said you can't even go back to 4.3, but then others that said it is possible. I tried a number of different ROMs and they didn't boot at all. Then I tried Omega ROM v14.1 (Android 4.2.2), and that works brilliantly now.
Here's the thread for it from this forum: http://forum.xda-developers.com/showthread.php?t=2232887. Only seems to be for Samsung Galaxy devices at this point.
It is an unbloated TW ROM (actually allows you to choose which Google and Samsung apps to install during a custom install process that begins when you flash it). It's faster than all my previous versions of Android, and obviously takes up less space.
Annoying that not everything works and that it took such a long time to get a successful installation, but at least I've found a ROM that has what I was looking for.
Y
Bl1zz4rd said:
Thanks for the help. There were some people who said that it's impossible to go back to 4.2.2 from 4.4.2 and some that said you can't even go back to 4.3, but then others that said it is possible. I tried a number of different ROMs and they didn't boot at all. Then I tried Omega ROM v14.1 (Android 4.2.2), and that works brilliantly now.
Here's the thread for it from this forum: http://forum.xda-developers.com/showthread.php?t=2232887. Only seems to be for Samsung Galaxy devices at this point.
It is an unbloated TW ROM (actually allows you to choose which Google and Samsung apps to install during a custom install process that begins when you flash it). It's faster than all my previous versions of Android, and obviously takes up less space.
Annoying that not everything works and that it took such a long time to get a successful installation, but at least I've found a ROM that has what I was looking for.
Click to expand...
Click to collapse
Yup but that is a custom ROM and with proper recovery you can go down to 4.2.2 but when we speak of Stock Samy Firmware and Odin it is imposible i have tested it. And Omega is great but still Custom hehehehe
AlenKing said:
Yup but that is a custom ROM and with proper recovery you can go down to 4.2.2 but when we speak of Stock Samy Firmware and Odin it is imposible i have tested it. And Omega is great but still Custom hehehehe
Click to expand...
Click to collapse
Oh yeah, I became aware of that very early on during my search. All the ROMs I've been trying to get working have been custom and Omega is the only one that's actually booted.
I'm just glad I found something that looks like my old TW 4.2.2. Don't really mind whether or not it's custom. It is a shame that you can't go back to older official Samsung firmware once you've updated though. What do you think the reason for that is?
Samsung's "control" issue
SMT210 from 4.1.2 to 4.4.2, & verse will work?
i had change my 210 rom to moded one to have have Kidsmode.
but is is slow, kill battery.
as all know the 4.4.2 is super better than 4.1.2
also, as i know if i go from 4.1.2 to 4.4.2, i cannot downgrade at all
so Q
1- if am on mode rom 4.1.2, can i go to mod rom 4.4.2 and if did not like go back to my old mod rom? or it is dead to me on 4.4.2.?
2-most 4.4.2 on Samsung have the new add on kid mode, will the SMT210 have it on 4.4.2?
imteresting
isa.ahmed said:
SMT210 from 4.1.2 to 4.4.2, & verse will work?
i had change my 210 rom to moded one to have have Kidsmode.
but is is slow, kill battery.
as all know the 4.4.2 is super better than 4.1.2
also, as i know if i go from 4.1.2 to 4.4.2, i cannot downgrade at all
so Q
1- if am on mode rom 4.1.2, can i go to mod rom 4.4.2 and if did not like go back to my old mod rom? or it is dead to me on 4.4.2.?
2-most 4.4.2 on Samsung have the new add on kid mode, will the SMT210 have it on 4.4.2?
Click to expand...
Click to collapse
So I would think u can downgrade but if you do I think u have to flash stock ROM through Odin but I could be wrong because of bootloaders and other stuff
Second question I can't answer I think u would have to get the stock 442 ROM that has it I don't know not got alot of knowledge with downgrading
dsilx said:
So I would think u can downgrade but if you do I think u have to flash stock ROM through Odin but I could be wrong because of bootloaders and other stuff
Second question I can't answer I think u would have to get the stock 442 ROM that has it I don't know not got alot of knowledge with downgrading
Click to expand...
Click to collapse
just to let you know, that once you go to 4.4 on any device, you cannot downgrade at all.
as the 4.4 change the partition of the internal, which cannot be change by downgraded. i had this issue with allot of other android
isa.ahmed said:
just to let you know, that once you go to 4.4 on any device, you cannot downgrade at all.
as the 4.4 change the partition of the internal, which cannot be change by downgraded. i had this issue with allot of other android
Click to expand...
Click to collapse
I have personally booted 4.1.2 on my 210R after upgrading to 4.4.2. I just restored a TWRP backup I had made, and it still worked with the KitKat bootloader.
I recently updated my N7105 to the recent 4.4.2 Nordic ROM ( n7105xxufnd3 )that was floating round that tripped my Knox, which I dont care about.
When i got sick of the updates abysmal battery life i flashed the latest stable release of CM for the GNII LTE a 4.3 based ROM with out issues.
But I'd like to know if i can revert back to my original ROM i.e. WanamLite MC3 V1.3, a TW 4.1.2 based ROM, for its spen support, battery life, atpx and boeffla sound support (im a big music listener) w/ Wanam's Adam Kernel.
Can i do this with out running into any issues, despite the gap between a 4.4.2 boot-loader (as I've been told i cant roll-back from this version) to a TW 4.1.2 ROM?
Thanks in advance guys
greyhamism said:
Can i do this with out running into any issues?
Click to expand...
Click to collapse
Based from what I remember, devs say that when you are with KK BL (ND3), you cannot flash a stock rom lower than it and the lowest custom rom that you can flash is 4.3.
Is there anyway i can flash an older bootloader? and/or is there a similar ROM to Wanam's that uses 4.3 as its base?
As awesome as CM is, there are touchwiz features specific to the note series that are hard to implement on CM/ASOP based ROMS :/
greyhamism said:
Is there anyway i can flash an older bootloader? and/or is there a similar ROM to Wanam's that uses 4.3 as its base?
Click to expand...
Click to collapse
Do not try to install anything lower as it will break device. I'm sorry, I know nothing about wanam lite.
I have a unrooted note 2, manually installed 4.4.2 as 4.3 had major battery issues.
Things got worse for me in 4.4.2 nordic countries and I went and downloaded the offical roms from sammobile and am now back on 4.1.1 offical.
It can be done.
Sent from my SM-T310 using XDA Free mobile app
hotkolbas said:
It can be done.
Click to expand...
Click to collapse
Wow, I thought once you are in a higher bootloader, you cannot install a lower one. No problems at all?
I'm sorry if I gave out wrong info, that was how I knew it was.
I have no issues at all.
Apart from missing out on features from 4.1.2 and above everything works as if I didnt update the device at all.
I would not do a restore from higher up android versions but if you start feom scratch its all good.
And I can say my zero lemon battery is working at it should be, I now have days worth of battery life.
I'm getting invalid kernel/ ramdisk size error on bootloader screen. This is the first time I got this error while entering recovery screen. I'm don't know much about this. Please help.
I have rooted Moto X (2013) running LiquidSmooth v 3.2
Sent from my Moto X using XDA Free mobile app
Sorry champ but this threqd is for a galaxy note 2 specifically a gt7105 and has installed a samsung stock rom, I have done this and have gone back to 4.1.1 but seeing as you have a rooted romed moto x it is out of my league.
I dare say this process is incompatible with the moto x and seeing as you can get into recovery or cwm or what ever its called you can still flash a rom with the relavent bootloader that was previous to your dilemma
Sent from my SM-T310 using XDA Free mobile app
Can anyone Please tell me what would the best rom I could choose to install? I understand I can't downgrade from 4.4.2 to 4.1.2 what choices (if any) do I have? I have googled and tried my best to take in some of the vast info on XDA most confusing on what to exactly choose or look for Im not computer savy like many on here
Note 2 t0lexx LTE Kitkat 4.4.2 (drains battery quickly) despite stopping some apps with Titanium still feel as though the rom has a lot of bloatware, network works along with wifi and bluetooth
SuperSU, network unlocked, Clockworkmod recovery 6.0.4.1
knox0x1
FIRMWARE INFO
Bootloader N7105XXUFNI2
Baseband N7105BVUFNE1
PDA N7105XXUFN12
CSC N7105EVRNG1
Kernal N7105 3.0.31-2682814 [email protected] 3912 #1
Would Ditto note 3 or 4 work or would I be better with Dimond Rom V8.0L or Nameless 5.0 (think I read somewhere of problems with Bluetooth and Wifi, Im not 100% sure)
Thank you for any help
Miui v5 4.1 works on the kit kat bootloader
1eyedmonster said:
Miui v5 4.1 works on the kit kat bootloader
Click to expand...
Click to collapse
Would this give better battery life?
The link i clicked on earlier http://forum.xda-developers.com/galaxy-s2/development/rom-miui-v5-v4-4-18-t2520363
Is there a link for this rom which will work for my phone, the ones I have seen say stock 4.2.1 or for other phones im not sure about international , just looking for something better that will replace kitkat 4.4.2
Thanks
I need help in installing the factory Touchwiz ROM for my Galaxy SIII. I don't know where to get it and I don't know which one I need.
The reason is because CyanogenMod is not working correctly with my FreedomPop (Sprint) network. I can't update PRL or profile. The camera app doesn't work either, because it constantly crashes and I have to reboot the phone. Various other issues, but those stand out as priority. Any help would be greatly appreciated, thanks!
Here's my phones specs:
Current CM version: 11-20150222-NIGHTLY-d2lte
SPH-L710
Android version: 4.4.4
Baseband version: L710VPUDND8
adabo said:
I need help in installing the factory Touchwiz ROM for my Galaxy SIII. I don't know where to get it and I don't know which one I need.
The reason is because CyanogenMod is not working correctly with my FreedomPop (Sprint) network. I can't update PRL or profile. The camera app doesn't work either, because it constantly crashes and I have to reboot the phone. Various other issues, but those stand out as priority. Any help would be greatly appreciated, thanks!
Here's my phones specs:
Current CM version: 11-20150222-NIGHTLY-d2lte
SPH-L710
Android version: 4.4.4
Baseband version: L710VPUDND8
Click to expand...
Click to collapse
If you don't have a touchwiz backup, go to the Android development section and download a rom to flash. You can get either the stock or Wicked X roms there. They will let you update PRL and profile.
@ivpre Thanks for the response! Any suggestion which version to get? Would the latest one work? Reason I'm asking is I used to have a Verizon Galaxy SIII and once you took the update, it locked the bootloader. Is this something I should be concerned about?
adabo said:
@ivpre Thanks for the response! Any suggestion which version to get? Would the latest one work? Reason I'm asking is I used to have a Verizon Galaxy SIII and once you took the update, it locked the bootloader. Is this something I should be concerned about?
Click to expand...
Click to collapse
One you upgrade to a firmware with Knox you can't revert back to one without it. Not a problem for most folks. I currently use ND8 bootloader with NDC modem. I hear NJ2 has a fair performance boost tho.
adabo said:
@ivpre Thanks for the response! Any suggestion which version to get? Would the latest one work? Reason I'm asking is I used to have a Verizon Galaxy SIII and once you took the update, it locked the bootloader. Is this something I should be concerned about?
Click to expand...
Click to collapse
You are probably good since you were running CM. But to run the latest TouchWiz, you need to be on ND8 or NJ2. If not on either of those, read the stuff below.
MAKE UP A NANDROID BAKCUP OF YOUR CURRENT SET UP
To update to NJ2: http://www.sammobile.com/firmwares/d...10SPRDNJ2_SPR/
Flash a recovery via ODIN, it is the program you used in the above step: http://forum.xda-developers.com/show....php?t=2201860
There is also TWRP somewhere, but even though Philz isn't being developed, I haven' t had any issues with it. But if you want to recover your previous setup, it is probably best to use the same recovery as before.
The latest WickedX or Wicked S5 should work just fine. If you are unsure of your current firmware, I would just follow the directions above. Then you can flash a rom or root.